Reuse of Lime Sludge from Water Softening and Coal Combustion Byproducts, TR-459, 2004

Disposal of lime sludge remains a major challenge to cities in the Midwest. Disposal of lime sludge from water softening adds about 7-10% to the cost of water treatment. Having effective and safe options is essential for future compliance with the regulations of the State of Iowa and within budget restrictions. Dewatering and drying are essential to all reuse applications as this affects transportation costs and utility. Feasibility tests were conducted on some promising applications like SOx control in power generation facilities that burn coal, replacement of limestone as an ingredient in portland cement production, dust control on gravel roads, neutralization of industrial wastewater pH, and combination with fly ash or cement in construction fill applications. A detailed report and analysis of the construction fills application is presented in the second half of the report. A brief discussion of the results directly follows.

Letter health consultation : Mason City coal gasification plant site, Mason City, Iowa EPA facility ID: IAD980969190 (2008)

This letter has been prepared as a consultation to EPA regarding the first five-year review of the Mason City Coal Gasification Plant Site, located in Mason City, Iowa to provide an evaluation of the public health status of the site.

Health consultation : Review of on-site air monitoring data during the removal action at Le Mars coal gas site, Le Mars coal gas plant Le Mars, Plymouth County, Iowa EPA facility ID: IA0001032556 (2005)

The Iowa Department of Public Health (IDPH), Hazardous Waste Site Health Assessment Program was asked by the US Environmental Protection Agency (EPA) to review a round of air sampling data. The air data was collected and analyzed during a removal action at the Le Mars Coal Gas Site in Le Mars, Iowa. EPA asked IDPH to determine from the air data if additional monitoring is necessary throughout the removal action to protect nearby residents from exposure.

Assessment of Customer Needs in Fine Coal Dewatering

Työn tavoitteena on kartoittaa ja arvioida asiakastarpeita hienojakoisen hiilen ja nesteen erotuksessa. Aluksi työssä kuvataan hiiliteollisuutta, jonka jälkeen syvennytäänhiilen ja nesteen erotukseen. Tämän jälkeen keskitytään asiakastarpeiden kartoittamiseen. Jo olemassaolevan tiedon keräämiseen käytetään haastatteluja ja kysymyslomakkeita. Saatyn AHP-mallia hyödynnetään asiakastarpeiden arvioinnissa. Yksi suurimmista haasteista puhtaan hiiliteknologian käytössä on kustannustehokas nesteen ja hienojakoisen hiilen erotus, joka on tärkeää rahtauskustannusten minimoinnin, laatuvaatimusten täyttämisen ja prosessiveden kierrättämisen kannalta. Tekniset ominaisuudet ja kustannukset ovat tärkeimmät ominaisuudet hiilen ja veden suodatinratkaisussa asiantuntijoiden mukaan. Asiakkaan mukaan laatu, tekniset ominaisuudet ja tukipalvelut ovat tärkeitä.Sekä asiakkaan että asiantuntijoiden mielestä korkea yksikkökapasiteetti, matala lopputuotteen kosteus ja luotettavuus ovat tärkeimmät tekniset ominaisuudet. Investointikustannukset ovat noin kolme kertaa tärkeämpiä kuin käyttökustannukset. Asiakkaan mukaan laitetoimittajan ominaisuudet ovat tärkeämpiä kuin teknologiset ominaisuudet.

The First World War and Coal Trade Geography in Latin America and the Caribbean, 1890-1930

This paper aims to illustrate the dynamics of coal trade between Latin America and its main trade partners, i.e., the USA, Great Britain, and Germany, before and after the enormous disruption caused by the First World War. The coal trade was used as an indicator of modernization for Latin American countries, given that oil was at that time of secondary importance. Energy imports have determined the possibilities of each Latin American country in its process of development. Here, we address this question and place special emphasis on supply channels, concluding that the trade link with main suppliers was of key significance. Although this was very clear by the end of the period, the process had started well before the First World War, at least for the majority of LA&C countries. These points are developed through a gravity model applied to the bilateral coal trade. The importance of the market supplier share is addressed through cluster methodologies.

The coal bearing Cenozoic As Pontes Basin (NW Spain): Geological influence on its coal's characteristics

Lignite deposits in the Cenozoic As Pontes strike-slip basin (northwestern Spain)were formed as a function of specific paleoclimatic conditions and tectonic evolution of the basin.

Lacustrine Systems in Convergent Margins

From the late seventies to the present day, lacustrine sedimentology and lacustrine-related basin analysis have developed from a near-marginal aca- demic curiosity into a new ground-breaking multidisciplinary body of learning. The starting-point was economic interest in ancient lacustrine sequences as potential suppliers of natural resources such as raw materials (diatomites, clays), evaporite salts and energy (hydrocarbons and coal). The early discoveries of substantial hydrocarbon reserves connected with lacustrine facies in the western USA heralded the huge reserves found later in China, Brazil, western Africa, southeast Asia and the Caspian Sea, among other places.

Coal deposition in carbonate rich shallow Lacustrine systems: The Calaf and Mequinenza sequences (Oligocene, eastern Ebro Basin, NE Spain)

Two main coal-bearing sequences developed during the Oligocene in the Tertiary Ebro Basin, the Calaf (early Oligocene) and Mequinenza (late Oligocene) coal basins. Coal deposition took place in shallow marsh-swamp-lake complexes which sometimes became closed and evolved under warm climatic conditions with fluctuating humidity. These shallow lacustrine systems are closely interrelated with the terminal parts of the distributive fluvial systems which spread from the tectonically active Ebro basin margins. Laterally extensive lignite-bearing sequences, including rather thin, lenticular autochthonous and/or hypautochthonous coal seams with high ash and sulphur contents, characterized coal deposition in the shallow lacustrine systems. Coal seam geometry, which makes them nearly subeconomic, resulted from the tectonic instability during basin margin evolution and the sometimes closed, arid conditions under which the lacustrine systems evolved. High ash and sulphur contents resulted from the inadequate isolation of peat forming environments from clastic influx and from the very low acidity and sometimes high sulphate contents of the lacustrine waters. Coal exploration in shallow lacustrine sequences similar to those described here must take into account that the spread of coal-forming environments and maxima of coal deposition are usually coincident with lake expansions and retraction or shifting of the terminal fluvial zones interrelated with the lacustrine areas.

Gestor de reserves de pistes online

Desenvolupament d'una aplicació web per al club de tenis Les Argelagues, que requereix d'alguna solució tecnològica que permeti dur a terme les tasques de gestió online de les seves pistes de pàdel i tenis.

Prediction of individual automobile RBNS claim reserves in the context of Solvency II

Automobile bodily injury (BI) claims remain unsettled for a long time after the accident. The estimation of an accurate reserve for Reported But Not Settled (RBNS) claims is therefore vital for insurers. In accordance with the recommendation included in the Solvency II project (CEIOPS, 2007) a statistical model is here implemented for RBNS reserve estimation. Lognormality on empirical compensation cost data is observed for different levels of BI severity. The individual claim provision is estimated by allocating the expected mean compensation for the predicted severity of the victim’s injury, for which the upper bound is also computed. The BI severity is predicted by means of a heteroscedastic multiple choice model, because empirical evidence has found that the variability in the latent severity of injured individuals travelling by car is not constant. It is shown that this methodology can improve the accuracy of RBNS reserve estimation at all stages, as compared to the subjective assessment that has traditionally been made by practitioners.

Quantitative analysis of phenol and alkylphenols in Brazilian coal tar

The main purpose of this work is the identification and quantification of phenolic compounds in coal tar samples from a ceramics factory in Cocal (SC), Brazil. The samples were subjected to preparative scale liquid chromatography, using Amberlyst A-27TM ion-exchange resin as stationary phase. The fractions obtained were classified as "acids" and "BN" (bases and neutrals). The identification and quantification of phenols, in the acid fraction, was made by gas chromatography coupled to mass spectrometry (GC/MS). Nearly twenty-five phenols were identified in the samples and nine of them were also quantified. The results showed that coal tar has large quantities of phenolic compounds of industrial interest.

A thermogravimetric analysis of the combustion of a Brazilian mineral coal

Knowledge of coal combustion kinetics is crucial for burner design. This work aims to contribute on this issue by determining the kinetics of a particular Brazilian bituminous coal. Non-isothermal thermogravimetry was applied for determining both the pre-exponential factor and the activation energy. Coal samples of 10 mg and 775 mm mean size were used in synthetic air atmospheres (21 % O2). Heating rates from 10 to 50 ºC/min were applied until the temperature reached 850 ºC, which was kept constant until burnout. The activation energy for the primary and the secondary combustion resulted, respectively, in 135.1 kJ/mol and 85.1 kJ/mol.