GIS capacity building for risk management to help developing countries:Case of climate change problem in Amhara rural region (Ethiopia)

Dissertation submitted in partial fulfillment of the requirements for the Degree of Master of Science in Geospatial Technologies.

SURVIVAL CAPACITY OF Arcobacter butzleri INOCULATED IN POULTRY MEAT AT TWO DIFFERENT REFRIGERATION TEMPERATURES

Arcobacter spp. are emerging enteropathogens and potential zoonotic agents that can be transmitted by food and water, being considered a public health risk. The high isolation rate of these bacteria from poultry products suggests that it may be a major source of human infections. One hallmark for differentiating the genus Arcobacter fromCampylobacter includes their growing capacity at low temperatures (15-30 °C) under aerobic conditions. However, little is known about the population density variation of these bacteria at different refrigeration temperatures. The aim of this study was to determine the survival behavior of two different Arcobacter butzleri concentrations (104 CFU/mL and 107 CFU/mL) inoculated on chicken legs and held at two different refrigeration temperatures (4 and 10 °C) throughout storage time. Results have shown that A. butzleri had growing capacity both at 4 and 10 °C. No statistical difference between the survival trends was found for both bacterial concentrations and temperatures tested. This study shows that A. butzleri is a robust species with regard to storage temperature, and represents a potential health risk for poultry meat consumers.

Application of ionic liquids and enzymes for the removal of proteinaceous layers from polychrome of works of art and evaluation of the cleaning effectiveness

Dissertação Apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do grau de Mestre em Ciências da Conservação, especialização em Pintura

Influence of Schistosoma mansoni infection on the reproductive capacity of albino mice

This paper reports reduction on the reproductive capacity of female mice infected with Schistosoma mansoni, either in the acute phase or in the chronic one of the disease. This decrease in the reproductive capacity was highly significant (93.3% and 86.7%, for the acute and chronic phases, respectively)..

Hole cleaning performance monitoring during the drilling of directional wells

During drilling operation, cuttings are produced downhole and must be removed to avoid issues which can lead to Non Productive Time (NPT). Most of stuck pipe and then Bottom-Hole Assembly (BHA) lost events are hole cleaned related. There are many parameters which help determine hole cleaning conditions, but a proper selection of the key parameters will facilitate monitoring hole cleaning conditions and interventions. The aim of Hole Cleaning Monitoring is to keep track of borehole conditions including hole cleaning efficiency and wellbore stability issues during drilling operations. Adequate hole cleaning is the one of the main concerns in the underbalanced drilling operations especially for directional and horizontal wells. This dissertation addresses some hole cleaning fundamentals which will act as the basis for recommendation practice during drilling operations. Understand how parameters such as Flowrate, Rotation per Minute (RPM), Rate of Penetration (ROP) and Mud Weight are useful to improve the hole cleaning performance and how Equivalent Circulate Density (ECD), Torque & Drag (T&D) and Cuttings Volumes coming from downhole help to indicate how clean and stable the well is. For case study, hole cleaning performance or cuttings volume removal monitoring, will be based on real-time measurements of the cuttings volume removal from downhole at certain time, taking into account Flowrate, RPM, ROP and Drilling fluid or Mud properties, and then will be plotted and compared to the volume being drilled expected. ECD monitoring will dictate hole stability conditions and T&D and Cuttings Volume coming from downhole monitoring will dictate how clean the well is. T&D Modeling Software provide theoretical calculated T&D trends which will be plotted and compared to the real-time measurements. It will use the measured hookloads to perform a back-calculation of friction factors along the wellbore.

Analysis, testing and development of safe cleaning methods of rusted stone material

Three different treatments were applied on several specimens of dolomitic and calcitic marble, properly stained with rust to mimic real situations (the stone specimens were exposed to the natural environment for about six months in contact with rusted iron). Thirty six marble specimens, eighteen calcitic and eighteen dolomitic, were characterized before and after treatment and monitored throughout the cleaning tests. The specimens were characterized by SEM-EDS (Scanning Electron Microscopy coupled with Energy Dispersion System), XRD (XRay Diffraction), XRF (X-Ray Fluorescence), FTIR (Fourier Transform Infrared Spectroscopy) and color measurements. It was also made a microscopic and macroscopic analysis of the stone surface along with the tests of short and long term capillary absorption. A series of test trials were conducted in order to understand which concentrations and contact times best suits to this purpose, to confirm what had been written to date in the literature. We sought to develop new methods of treatment application, skipping the usual methods of applying chemical treatments on stone substrates, with the use of cellulose poultice, resorting to the agar, a gel already used in many other areas, being something new in this area, which possesses great applicability in the field of conservation of stone materials. After the application of the best methodology for cleaning, specimens were characterized again in order to understand which treatment was more effective and less harmful, both for the operator and the stone material. Very briefly conclusions were that for a very intense and deep penetration into the stone, a solution of 3.5% of SDT buffered with ammonium carbonate to pH around 7 applied with agar support would be indicated. For rust stains in its initial state, the use of Ammonium citrate at a concentration of 5% buffered with ammonium to pH 7 could be applied more than once until satisfactory results appear.

Multi-Enzymatic Systems for Cleaning-up Synthetic Dyes from the Environment

Environmental pollution is one of the major and most important problems of the modern world. In order to fulfill the needs and demands of the overgrowing human population, developments in agriculture, medicine, energy sources, and all chemical industries are necessary (Ali 2010). Over the last century, the increased industrialization and continued population growth led to an augmented production of environmental pollutants that are released into air, water, and soil, with significant impact in the degradation of various ecosystems (Ali 2010, Khan et al. 2013).(...)

Effects of an exercise program on the functional capacity of patients with chronic Chagas' heart disease, evaluated by cardiopulmonary testing

INTRODUCTION: Despite all efforts to restrict its transmission, Chagas' disease remains a severe public health problem in Latin America, affecting 8-12 million individuals. Chronic Chagas' heart disease, the chief factor in the high mortality rate associated with the illness, affects more than half a million Brazilians. Its evolution may result in severe heart failure associated with loss of functional capacity and quality of life, with important social and medical/labor consequences. Many studies have shown the beneficial effect of regular exercise on cardiac patients, but few of them have focused on chronic Chagas' heart disease. METHODS: This study evaluated the effects of an exercise program on the functional capacity of patients with chronic Chagas' disease who were treated in outpatient clinics at the Evandro Chagas Institute of Clinical Research and the National Institute of Cardiology, Rio de Janeiro, Brazil. The exercises were performed 3 times a week for 1 h (30 min of aerobic activity and 30 min of resistance exercises and extension) over 6 months in 2010. Functional capacity was evaluated by comparing the direct measurement of the O2 uptake volume (VO2) obtained by a cardiopulmonary exercise test before and after the program (p < 0.05). RESULTS: Eighteen patients (13 females) were followed, with minimum and maximum ages of 30 and 72 years, respectively. We observed an average increase of VO2peak > 10% (p = 0.01949). CONCLUSIONS: The results suggest a statistically significant improvement in functional capacity with regular exercise of the right intensity.

Glutathione levels in and total antioxidant capacity of Candida sp. cells exposed to oxidative stress caused by hydrogen peroxide

INTRODUCTION: The capacity to overcome the oxidative stress imposed by phagocytes seems to be critical for Candida species to cause invasive candidiasis. METHODS: To better characterize the oxidative stress response (OSR) of 8 clinically relevant Candida sp., glutathione, a vital component of the intracellular redox balance, was measured using the 5,5'-dithiobis-(2-nitrobenzoic acid (DTNB)-glutathione disulfide (GSSG) reductase reconversion method; the total antioxidant capacity (TAC) was measured using a modified method based on the decolorization of the 2,2'-azinobis-(3-ethylbenzothiazoline-6-sulfonic) acid radical cation (ABTS*+). Both methods were used with cellular Candida sp. extracts treated or not with hydrogen peroxide (0.5 mM). RESULTS: Oxidative stress induced by hydrogen peroxide clearly reduced intracellular glutathione levels. This depletion was stronger in Candida albicans and the levels of glutathione in untreated cells were also higher in this species. The TAC demonstrated intra-specific variation. CONCLUSIONS: Glutathione levels did not correlate with the measured TAC values, despite this being the most important non-enzymatic intracellular antioxidant molecule. The results indicate that the isolated measurement of TAC does not give a clear picture of the ability of a given Candida sp. to respond to oxidative stress.

Evaluation of mechanical soft-abrasive blasting and chemical cleaning methods on alkyd-paint graffiti made on carbonate stones

In the context of this dissertation several studies were developed resulting in submission and publication “Evaluation of mechanical soft-abrasive blasting and chemical cleaning methods on alkyd-paint graffiti made on calcareous stones” to Journal of Cultural Heritage. (http://dx.doi.org/10.101 /j.culher.2014.10.004)

Ontogeny of swimming capacity in plaice (Pleuronectes platessa) larvae

Little is known regarding the swimming ability of the larvae of European plaice (Pleuronectes platessa) in relation to changes in total length (TL), dry weight (DW) and developmental stage, which is surprising given the importance of transport processes to the recruitment dynamics of this species in the North Sea and elsewhere. We investigated ontogenetic changes in the critical swimming speed (Ucrit) of plaice from hatching to the onset of metamorphosis (50 days post-hatch, dph) at 8 °C. The mean (±SD) TL and DW growth rates were 1.59 ± 0.81 and 7.7 ± 0.35 % d−1, respectively. Larvae were unable to swim at against a minimum current speed of <0.5 cm s−1 until 10 dph (7 mm TL), after which Ucrit significantly increased with increasing TL until the onset of metamorphosis and subsequent settlement. Mean (±SD) Ucrit was 0.38(0.35), 1.59(0.54), 2.27(0.49) and 2.99(0.37) cm s−1 for stage I (6.61 ± 2.64 mm TL), stage II (7.75 ± 0.60 mm TL), stage III (9.10 ± 1.00 mm TL) and stage IV (11.59 ± 0.85 mm TL) larvae, respectively. Larval TL, DW, DNA content, RNA content and Ucrit significantly increased, whereas sRD significantly declined as larvae developed from stage I to V. Although inter-individual differences in Ucrit (coefficient of variation, CV = 33 %) were as large as those in biochemical and morphological condition (CV’s of 21–42 %), differences in Ucrit were not significantly related to those in nutritional condition and larvae with lower DNA/DW had also better swimming abilities. These estimates should be useful to ongoing efforts to create individual- based models of the transport, foraging and growth of plaice larvae in the North Sea.

Pulmonary function and aerobic capacity in asymptomatic bariatric candidates with very severe morbid obesity

PURPOSE: Aerobic capacity and respiratory function may be compromised in obesity, but few studies have been done in highly obese bariatric candidates. In a prospective study, these variables were documented in the preoperative period, aiming to define possible physiologic limitations in a apparently healthy and asymptomatic population. METHOD: Forty-six consecutively enrolled adults (age 39.6 ± 8.4 years, 87.0% females, body mass index /BMI 49.6 ± 6.3 kg/m² ) were analyzed. Ventilatory variables were investigated by automated spirometry, aerobic capacity was estimated by a modified Bruce test in an ergometric treadmill, and body composition was determined by bioimpedance analysis. RESULTS: Total fat was greatly increased (46.4 ± 4.6% of body weight) and body water reduced (47.3 ± 4.6 % body weight), as expected for such obese group. Spirometric findings including forced vital capacity of 3.3 ± 0.8 L and forced expiratory volume-1 second of 2.6 ± 0.6 L were usually acceptable for age and gender, but mild restrictive pulmonary insufficiency was diagnosed in 20.9%. Aerobic capacity was more markedly diminished, as reflected by very modest maximal time (4.5 ± 1.1 min) and distance (322 ±142 m) along with proportionally elevated maximal oxygen consumption (23.4 ± 9.5 mL/kg/min) achieved by these subjects during test exercise. CONCLUSIONS: 1) Cardiopulmonary evaluation was feasible and well-tolerated in this severely obese population; 2) Mean spirometric variables were not diminished in this study, but part of the population displayed mild restrictive changes; 3) Exercise tolerance was very negatively influenced by obesity, resulting in reduced endurance and excessive metabolic cost for the treadmill run; 4) More attention to fitness and aerobic capacity is recommended for seriously obese bariatric candidates;

Understanding impact readiness in Portugal’s social sector and designing a framework for capacity-building for social impact

This project is based on the theme of capacity-building in social organisations to improve their impact readiness, which is the predictability of delivering intended outcomes. All organisations which have a social mission, non-profit or for-profit, will be considered to fall within the social sector for the purpose of this work. The thesis will look at (i) what is impact readiness and what are the considerations for building impact readiness in social organisations, (ii) what is the international benchmark in measuring and building impact readiness, (iii) understand the impact readiness of Portuguese social organisations and the supply of capacity building for social impact in Portugal currently, and (iv) provide recommendations on the design of a framework for capacity building for impact readiness adapted to the Portuguese context. This work is of particular relevance to the Social Investment Laboratory, which is a sponsor of this project, in its policy work as part of the Portuguese Social Investment Taskforce (the “Taskforce”). This in turn will inform its contribution to the set-up of Portugal Inovação Social, a wholesaler catalyst entity of social innovation and social investment in the country, launched in early 2015. Whilst the output of this work will be set a recommendations for wider application for capacity-building programmes in Portugal, Portugal Inovação Social will also clearly have a role in coordinating the efforts of market players – foundations, corporations, public sector and social organisations – in implementing these recommendations. In addition, the findings of this report could have relevance to other countries seeking to design capacity building frameworks in their local markets and to any impact-driven organisations with an interest in enhancing the delivery of impact within their work.

Experimental analysis of the cyclic response of traditional timber joints and their influence on the seismic capacity of timber frame structures

Timber connections represent the crucial part of a timber structure and a great variability exists in terms of types of connections and mechanisms. Taking as case study the widespread traditional timber frame structures, in particular the Portuguese Pombalino buildings, one of the most common timber connection is the half-lap joint. Connections play a major role in the overall behaviour of a structure, particularly when assessing their seismic response, since damage is concentrated at the connections. For this reason, an experimental campaign was designed and distinct types of tests were carried out on traditional half-lap joints to assess their in-plane response. In particular, pull-out and in-plane cyclic tests were carried out on real scale unreinforced connections. Subsequently, the connections were retrofitted, using strengthening techniques such as self-tapping screws, steel plates and GFRP sheets. The tests chosen were meant to capture the hysteretic behaviour and dissipative capacity of the connections and characterise their response and, therefore, their influence on the seismic response of timber frame walls, particularly concerning their uplifting and rotation capacity, that could lead to rocking in the walls. In this paper, the results of the experimental campaign are presented in terms of hysteretic curves, dissipated energy and equivalent viscous damping ratio. Moreover, recommendations are provided on the most appropriate retrofitting solutions.

Estudo do trabalho numa empresa de produção de pneus e implementação de ferramentas Lean

Dissertação de mestrado integrado em Engenharia e Gestão Industrial