Effects of cold weather on durability of CFRP strengthened circular hollow steel members

Tubular members have become progressively more popular due to excellent structural properties, aesthetic appearance, corrosion and fire protection capability. However, a large number of such structures are found structurally deficient due to reduction of strength when they expose to severe environmental conditions such as marine environment, cold and hot weather. Hence strengthening and retrofitting of structural members are in high demands. In recent times Carbon Fibre Reinforced Polymers (CFRP) composites appears to be an excellent solution to enhance the load carrying capacity and serviceability of steel structures because of its superior physical and mechanical properties. However, the durability of such strengthening system under cold environmental condition has not yet been well documented to guide the engineers. This paper presents the findings of a study conducted to enhance the bond durability of CFRP strengthened steel tubular members by treating steel surface using epoxy based adhesion promoter under cold weather subjected to bending. The experimental program consisted of six number of CFRP strengthened specimens and one bare specimen. The sand blasted surface of the three specimens to be strengthened was pre-treated with MBrace primer and other three were remained untreated and then cured under ambient temperature and cold weather (3oC) for three and six months period of time. The beams were then loaded to failure under four point bending. The structural response of each specimen was predicted in terms of failure mode, failure load and mid-span deflection. The research findings show that the cold weather immersion had an adverse effect on durability of CFRP strengthened structures. Moreover, the epoxy based adhesion promoter was found to enhance the bond durability in elastic range.

Spiritual wisdom of Taoism in business : through the lens of interpretation realism in a Cisco end-to-end case study

This paper explores how the amalgamated wisdom of East and West can instigate a wisdombased renaissance of humanistic epistemology (Rooney & McKenna, 2005) to provide a platform of harmony in managing knowledge-worker productivity, one of the biggest management challenges of the 21st century (Drucker, 1999). The paper invites further discussions from the social and business research communities on the significance of "interpretation realism" technique in comprehending philosophies of Lao Tzu Confucius and Sun Tzu (Lao/Confucius/Sun] written in "Classical Chinese." This paper concludes with a call to build prudent, responsible practices in management which affects the daily lives of many (Rooney & McKenna, 2005) in today's knowledgebased economy. Interpretation Realism will be applied to an analysis of three Chinese classics of Lao/Confucius/Sun which have been embodied in the Chinese culture for over 2,500 years. Comprehending Lao/Confucius/Sun's philosophies is the first step towards understanding Classical Chinese culture. However, interpreting Chinese subtlety in language and the yin and yang circular synthesis in their mode of thinking is very different to understanding Western thought with its open communication and its linear, analytical pattern of Aristotelian/Platonic wisdom (Zuo, 2012). Furthermore, Eastern ways of communication are relatively indirect and mediatory in culture. Western ways of communication are relatively direct and litigious in culture (Goh, 2002). Furthermore, Lao/Confucius/Sun's philosophies are difficult to comprehend as there are four written Chinese formats and over 250 dialects: Pre-classical Chinese Classical Chinese Literary Chinese and modern Vernacular Chinese Because Classical Chinese is poetic, comprehension requires a mixed approach of interpretation realism combining logical reasoning behind "word splitting word occurrences", "empathetic metaphor" and "poetic appreciation of word.

Fashion in Shanghai : the designers of a new economy of style

This thesis is a study of Chinese fashion designers in Shanghai. It shows fashion designers are building businesses, forging their professional reputations and developing a design aesthetic. Some designers are extremely successful in applying some elements of Chinese philosophy to their work, such as Buddhism, Confucianism and Daoism. In doing so, they challenge the dominance of the European fashion system with a new global fashion system.

Artefact and iteration : circular entanglements

In this workshop proposal I discuss a case study physical computing environment named Talk2Me. This work was exhibited in February 2006 at The Block, Brisbane as an interactive installation in the early stages of its development. The major artefact in this work is a 10 metre wide X 3 metre high light-permeable white dome. There are other technologies and artefacts contained within the dome that make up this interactive environment. The dome artefact has impacted heavily on the design process, including shaping the types of interactions involved, the kinds of technologies employed, and the choice of other artefacts. In this workshop paper, I chart some of the various iterations Talk2Me has undergone in the design process.

Factor Five : Transforming the Global Economy through 80% Improvements in Resource Productivity

The 21st century will see monumental change. Either the human race will use its knowledge and skills and change the way it interacts with the environment, or the environment will change the way it interacts with its inhabitants. In the first case, the focus of this book, we would see our sophisticated understanding in areas such as physics, chemistry, engineering, biology, planning, commerce, business and governance accumulated over the last 1,000 years brought to bear on the challenge of dramatically reducing our pressure on the environment. The second case however is the opposite scenario, involving the decline of the planet’s ecosystems until they reach thresholds where recovery is not possible, and following which we have no idea what happens. For instance, if we fail to respond to Sir Nicolas Stern’s call to meet appropriate stabilisation trajectories for greenhouse gas emissions, and we allow the average temperature of our planets surface to increase by 4-6 degrees Celsius, we will see staggering changes to our environment, including rapidly rising sea level, withering crops, diminishing water reserves, drought, cyclones, floods… allowing this to happen will be the failure of our species, and those that survive will have a deadly legacy. In this update to the 1997 International Best Seller, Factor Four, Ernst von Weizsäcker again leads a team to present a compelling case for sector wide advances that can deliver significant resource productivity improvements over the coming century. The purpose of this book is to inspire hope and to then inform meaningful action in the coming decades to respond to the greatest challenge our species has ever faced – that of living in harmony with our planet and its other inhabitants.

On helical shear of a compressible elastic circular cylindrical tube

In this paper we examine the combined azimuthal and axial shear of a compressible isotropic elastic circular cylindrical tube of finite extent, otherwise referred to as helical shear (which is an isochoric deformation). The equilibrium equations are formulated in terms of the principal stretches, and explicit necessary and sufficient conditions on the strain-energy function for the material to support this deformation are obtained and compared with those obtained previously for this problem. Several classes of strain-energy functions are derived and in some general cases complete solutions of the equilibrium equations are obtained. Existing results are recovered as special cases and some new results for the strain-energy functions derived are determined and discussed.

On extension and torsion of a compressible elastic circular cylinder

In this paper we examine the combined extension and torsion of a compressible isotropic elastic cylinder of finite extent. The equilibrium equations are formulated in terms of the principal stretches and then applied to the special case of pure torsion superimposed on a uniform extension (an isochoric deformation). Explicit necessary and sufficient conditions on the strain-energy function for the material to support this deformation with vanishing traction on the lateral surfaces of the cylinder are obtained. Some strain-energy functions satisfying these conditions are considered, existing results are recovered as special cases and new results are obtained. We also point out how the strain-energy functions generated from the considered isochoric deformation considered (of a compressible material) can be used to generate energy functions and corresponding solutions for the incompressible theory.

Mechanical model and superelastic properties of carbon microcoils with circular cross-section

Here we report on an unconventional Ni-P alloy-catalyzed, high-throughput, highly reproducible chemical vapor deposition of ultralong carbon microcoils using acetylene precursor in the temperature range 700-750 °C. Scanning electron microscopy analysis reveals that the carbon microcoils have a unique double-helix structure and a uniform circular cross-section. It is shown that double-helix carbon microcoils have outstanding superelastic properties. The microcoils can be extended up to 10-20 times of their original coil length, and quickly recover the original state after releasing the force. A mechanical model of the carbon coils with a large spring index is developed to describe their extension and contraction. Given the initial coil parameters, this mechanical model can successfully account for the geometric nonlinearity of the spring constants for carbon micro- and nanocoils, and is found in a good agreement with the experimental data in the whole stretching process.

Cultural economy planning in creative cities : discourse and practice

While a growing body of research analyses the functional mechanisms of the cultural or creative economy, there has been little attention devoted to understanding how local governments translate this work into policy. Moreover, research in this vein focuses predominately on Richard Florida's creative class thesis rather than considering the wider body of work that may influence policy. This article seeks to develop a deeper understanding of how municipalities conceptualize and plan for the cultural economy through the lens of two cities held up as model ‘creative cities’ — Austin, Texas and Toronto, Ontario. The work pays particular attention to how the cities adopt and adapt leading theories, strategies and discourses of the cultural economy. While policy documents indicate that the cities embrace the creative city model, in practice agencies tend to adapt conventional economic development strategies for cultural economy activity and appropriate the language of the creative city for multiple purposes.

The cultural economy in recession : Examining the US experience

Over the last two decades we have witnessed the global rise and spread of urban development policies aimed at stimulating the cultural economy. However, with the onset of the global financial crisis and recession, the cultural economy may experience a dramatic reorganization and even decline. Given the attention many cities place on the cultural sectors it is important to examine how they fare following this major economic event. To do so, this article examines the occupational distribution and geographic structure of the cultural economy in the 30 largest US metropolitan areas during recession and captures the changes that have occurred over the last decade. Based on this analysis, we identify a set of key trends, which highlight that while the boom period is generally characterized by widespread and, in some places, extreme growth in the cultural sectors, the recession is a period of selective growth and not a period of total decline. These findings have implications for determining the relevance of the arts and cultural sectors as targets of urban economic development policy in the post-recession era.

Art spaces in community and economic development : connections to neighborhoods, artists, and the cultural economy

There is growing interest in the arts in community and economic development, yet little research examines the dynamics of community-based arts institutions to inform urban planning and policy. Drawing on interviews with participants and organizers of small and midsized art spaces, the study explores the factors that influence their involvement in neighborhood revitalization and outreach, support for artistic communities, and efforts to build bridges to commercial cultural sectors. Art spaces function as a conduit for building social networks that contribute to both community revitalization and artistic development. But issues pertaining to the location, organization, and management of art spaces may limit their community and economic development potential. The article concludes with proposals to craft stronger arts-based community and economic development programs.

Essays in the political economy of voting and reforms

This thesis presents four essays in the political economy of elections and reforms. The first study exploits discontinuities around school entry cut-off dates to show that early childhood conditions can impact the probability to become a top-flight politician. The second study provides empirical estimates of the effect of sequential voting on turnout and bandwagon voting outside the laboratory. The third work describes a novel nonparametric strategy to identify tactical voting patterns directly from balloting results using British election data. Finally, a study is put forward that examines the political feasibility of reforms.

Educating for the creative economy in emerging countries

In 1972, the United Nations (UN) Conference on the Human Environment expressed a growing realization that economic and social progress needed to be balanced with a concern for the environment and the stewardship of natural resources. The hard-to-grasp concept of "sustainable development" was first defined as "development that meets the needs of the present without compromising the ability of future generations to meet their needs" (World Commission on Environment and Development [WESDJ, 1987, p. 43). This definition contains two concepts: first, "human needs," with priority given to the world's poor, and, second, the environment's limits for meeting the state of technological and social organization (WESD, 1987, p. 43). At the 2002 World Summit on Sustainable Development (UN, 2002a), the focus on environmental protection broadened to encompass social justice and the fight against poverty as key principles of development that is sustainable. Three interdependent and mutually reinforcing "pillars" were recognized: economic development, social development, and environmental protection. These pillars must be established at local, national, and global levels. The complexity and interrelationship of critical issues such as poverty, wasteful consumption, urban decay, population growth, gender inequality, health, conflict, and the violation of human rights are addressed in all three pillars (Pigozzi, 2003, p. 3). Following the concept of sustainable development, we argue that the challenge for developing countries in contemporary society is to meet the very real need for economic development and opportunities for income generation, while avoiding the unintended and unwanted consequences of economic development and globalization. These consequences include social exclusion, loss of cultural heritage, and environmental and ecological problems.

A Tradable Permit System in an Intertemporal Economy

It is known that in an intertemporal competitive economy, a tradable permit system may not achieve efficiency without setting appropriate permit interest rates (i.e., rewards for holding permits). To find the rates, however, we need to know in advance the path of efficient permit prices, which is difficult to obtain. This study intends to solve this problem in two ways. First, we analyze a special case in which the permit interest rates are given by a simple rule. For example, if the marginal abatement cost of pollution emission is constant, then the appropriate rate is to equal the monetary interest rate. As is the case for global warming, if the damage is caused in the future far beyond the planning period of the environmental program, the appropriate rate coincides with the marginal self-recovery of environmental stock under certain conditions. As a second approach, we propose a tradable permit system with a permit bank, as a mechanism by which the permit interest rates are generated endogenously without governmental intervention other than the issuance of permits. However, we also show that this approach raises the problem of indeterminacy of the equilibrium. © 2013 Springer Science+Business Media Dordrecht.