Spherical collectors versus bare tethers for drag, thrust, and power generation

Performances of ED-tethers using either spherical collectors or bare tethers for drag, thrust, or power generation, are compared. The standard Parker-Murphy model of current to a full sphere, with neither space-charge nor plasmamotion effects considered, but modified to best fit TSS1R results, is used (the Lam, Al'pert/Gurevich space-charge limited model will be used elsewhere) In the analysis, the spherical collector is assumed to collect current well beyond its random-current value (thick-heath). Both average current in the bare-tether and current to the sphere are normalized with the short-circuit current in the absence of applied power, allowing a comparison of performances for all three applications in terms of characteristic dimensionless numbers. The sphere is always substantially outperformed by the bare-tether if ohmic effects are weak, though its performance improves as such effects increase.

Electro y dielectroforesis de nanopartículas por efecto fotovoltaico

El objetivo de esta tesis doctoral es la investigación del nuevo concepto de pinzas fotovoltaicas, es decir, del atrapamiento, ordenación y manipulación de partículas en las estructuras generadas en la superficie de materiales ferroeléctricos mediante campos fotovoltaicos o sus gradientes. Las pinzas fotovoltaicas son una herramienta prometedora para atrapar y mover las partículas en la superficie de un material fotovoltaico de una manera controlada. Para aprovechar esta nueva técnica es necesario conocer con precisión el campo eléctrico creado por una iluminación específica en la superficie del cristal y por encima de ella. Este objetivo se ha dividido en una serie de etapas que se describen a continuación. La primera etapa consistió en la modelización del campo fotovoltaico generado por iluminación no homogénea en substratos y guías de onda de acuerdo al modelo de un centro. En la segunda etapa se estudiaron los campos y fuerzas electroforéticas y dielectroforéticas que aparecen sobre la superficie de substratos iluminados inhomogéneamente. En la tercera etapa se estudiaron sus efectos sobre micropartículas y nanopartículas, en particular se estudió el atrapamiento superficial determinando las condiciones que permiten el aprovechamiento como pinzas fotovoltaicas. En la cuarta y última etapa se estudiaron las configuraciones más eficientes en cuanto a resolución espacial. Se trabajó con distintos patrones de iluminación inhomogénea, proponiéndose patrones de iluminación al equipo experimental. Para alcanzar estos objetivos se han desarrollado herramientas de cálculo con las cuales obtenemos temporalmente todas las magnitudes que intervienen en el problema. Con estas herramientas podemos abstraernos de los complicados mecanismos de atrapamiento y a partir de un patrón de luz obtener el atrapamiento. Todo el trabajo realizado se ha llevado a cabo en dos configuraciones del cristal, en corte X ( superficie de atrapamiento paralela al eje óptico) y corte Z ( superficie de atrapamiento perpendicular al eje óptico). Se ha profundizado en la interpretación de las diferencias en los resultados según la configuración del cristal. Todas las simulaciones y experimentos se han realizado utilizando como soporte un mismo material, el niobato de litio, LiNbO3, con el f n de facilitar la comparación de los resultados. Este hecho no ha supuesto una limitación en los resultados pues los modelos no se limitan a este material. Con respecto a la estructura del trabajo, este se divide en tres partes diferenciadas que son: la introducción (I), la modelización del atrapamiento electroforético y dielectroforético (II) y las simulaciones numéricas y comparación con experimentos (III). En la primera parte se fijan las bases sobre las que se sustentarán el resto de las partes. Se describen los efectos electromagnéticos y ópticos a los que se hará referencia en el resto de los capítulos, ya sea por ser necesarios para describir los experimentos o, en otros casos, para dejar constancia de la no aparición de estos efectos para el caso en que nos ocupa y justificar la simplificación que en muchos casos se hace del problema. En esta parte, se describe principalmente el atrapamiento electroforético y dielectroforético, el efecto fotovoltaico y las propiedades del niobato de litio por ser el material que utilizaremos en experimentos y simulaciones. Así mismo, como no debe faltar en ninguna investigación, se ha analizado el state of the art, revisando lo que otros científicos del campo en el que estamos trabajando han realizado y escrito con el fin de que nos sirva de cimiento a la investigación. Con el capítulo 3 finalizamos esta primera parte describiendo las técnicas experimentales que hoy en día se están utilizando en los laboratorios para realizar el atrapamiento de partículas mediante el efecto fotovoltaico, ya que obtendremos ligeras diferencias en los resultados según la técnica de atrapamiento que se utilice. En la parte I I , dedicada a la modelización del atrapamiento, empezaremos con el capítulo 4 donde modelizaremos el campo eléctrico interno de la muestra, para a continuación modelizar el campo eléctrico, los potenciales y las fuerzas externas a la muestra. En capítulo 5 presentaremos un modelo sencillo para comprender el problema que nos aborda, al que llamamos Modelo Estacionario de Separación de Carga. Este modelo da muy buenos resultados a pesar de su sencillez. Pasamos al capítulo 6 donde discretizaremos las ecuaciones que intervienen en la física interna de la muestra mediante el método de las diferencias finitas, desarrollando el Modelo de Distribución de Carga Espacial. Para terminar esta parte, en el capítulo 8 abordamos la programación de las modelizaciones presentadas en los anteriores capítulos con el fn de dotarnos de herramientas para realizar las simulaciones de una manera rápida. En la última parte, III, presentaremos los resultados de las simulaciones numéricas realizadas con las herramientas desarrolladas y comparemos sus resultados con los experimentales. Fácilmente podremos comparar los resultados en las dos configuraciones del cristal, en corte X y corte Z. Finalizaremos con un último capítulo dedicado a las conclusiones, donde resumiremos los resultados que se han ido obteniendo en cada apartado desarrollado y daremos una visión conjunta de la investigación realizada. ABSTRACT The aim of this thesis is the research of the new concept of photovoltaic or optoelectronic tweezers, i.e., trapping, management and manipulation of particles in structures generated by photovoltaic felds or gradients on the surface of ferroelectric materials. Photovoltaic tweezers are a promising tool to trap and move the particles on the surface of a photovoltaic material in a monitored way. To take advantage of this new technique is necessary to know accurately the electric field created by a specifc illumination in the crystal surface and above it. For this purpose, the work was divided into the stages described below. The first stage consisted of modeling the photovoltaic field generated by inhomogeneous illumination in substrates and waveguides according to the one-center model. In the second stage, electrophoretic and dielectrophoretic fields and forces appearing on the surface of substrates and waveguides illuminated inhomogeneously were studied. In the third stage, the study of its effects on microparticles and nanoparticles took place. In particular, the trapping surface was studied identifying the conditions that allow its use as photovoltaic tweezers. In the fourth and fnal stage the most efficient configurations in terms of spatial resolution were studied. Different patterns of inhomogeneous illumination were tested, proposing lightning patterns to the laboratory team. To achieve these objectives calculation tools were developed to get all magnitudes temporarily involved in the problem . With these tools, the complex mechanisms of trapping can be simplified, obtaining the trapping pattern from a light pattern. All research was carried out in two configurations of crystal; in X section (trapping surface parallel to the optical axis) and Z section (trapping surface perpendicular to the optical axis). The differences in the results depending on the configuration of the crystal were deeply studied. All simulations and experiments were made using the same material as support, lithium niobate, LiNbO3, to facilitate the comparison of results. This fact does not mean a limitation in the results since the models are not limited to this material. Regarding the structure of this work, it is divided into three clearly differentiated sections, namely: Introduction (I), Electrophoretic and Dielectrophoretic Capture Modeling (II) and Numerical Simulations and Comparison Experiments (III). The frst section sets the foundations on which the rest of the sections will be based on. Electromagnetic and optical effects that will be referred in the remaining chapters are described, either as being necessary to explain experiments or, in other cases, to note the non-appearance of these effects for the present case and justify the simplification of the problem that is made in many cases. This section mainly describes the electrophoretic and dielectrophoretic trapping, the photovoltaic effect and the properties of lithium niobate as the material to use in experiments and simulations. Likewise, as required in this kind of researches, the state of the art have been analyzed, reviewing what other scientists working in this field have made and written so that serve as a foundation for research. With chapter 3 the first section finalizes describing the experimental techniques that are currently being used in laboratories for trapping particles by the photovoltaic effect, because according to the trapping technique in use we will get slightly different results. The section I I , which is dedicated to the trapping modeling, begins with Chapter 4 where the internal electric field of the sample is modeled, to continue modeling the electric field, potential and forces that are external to the sample. Chapter 5 presents a simple model to understand the problem addressed by us, which is called Steady-State Charge Separation Model. This model gives very good results despite its simplicity. In chapter 6 the equations involved in the internal physics of the sample are discretized by the finite difference method, which is developed in the Spatial Charge Distribution Model. To end this section, chapter 8 is dedicated to program the models presented in the previous chapters in order to provide us with tools to perform simulations in a fast way. In the last section, III, the results of numerical simulations with the developed tools are presented and compared with the experimental results. We can easily compare outcomes in the two configurations of the crystal, in section X and section Z. The final chapter collects the conclusions, summarizing the results that were obtained in previous sections and giving an overview of the research.

Copy-up mutants of the plasmid RK2 replication initiation protein are defective in coupling RK2 replication origins.

The broad host range plasmid RK2 replicates and regulates its copy number in a wide range of Gram-negative bacteria. The plasmid-encoded trans-acting replication protein TrfA and the origin of replication oriV are sufficient for controlled replication of the plasmid in all Gram-negative bacteria tested. The TrfA protein binds specifically to direct repeat sequences (iterons) at the origin of replication. A replication control model, designated handcuffing or coupling, has been proposed whereby the formation of coupled TrfA-oriV complexes between plasmid molecules results in hindrance of origin activity and, consequently, a shut-down of plasmid replication under conditions of higher than normal copy number. Therefore, according to this model, the coupling activity of an initiation protein is essential for copy number control and a copy-up initiation protein mutant should have reduced ability to form coupled complexes. To test this model for plasmid RK2, two previously characterized copy-up TrfA mutations, trfA-254D and trfA-267L, were combined and the resulting copy-up double mutant TFrfA protein TrfA-254D/267L was characterized. Despite initiating runaway (uncontrolled) replication in vivo, the copy-up double-mutant TrfA protein exhibited replication kinetics similar to the wild-type protein in vitro. Purified TrfA-254D, TrfA-267L, and TrfA-254D/267L proteins were then examined for binding to the iterons and for coupling activity using an in vitro ligase-catalyzed multimerization assay. It was found that both single and double TrfA mutant proteins exhibited substantially reduced (single mutants) or barely detectable (double mutant) levels of coupling activity while not being diminished in their capacity to bind to the origin of replication. These observations provide direct evidence in support of the coupling model of replication control.

Dinâmica molecular de sistemas iônicos poliatômicos: modelos polarizável e não-polarizável

Simulações de sais de carbonato fundidos pelo método de Dinâmica Molecular (MD) foram efetuadas com o modelo polarizável de cargas flutuantes (FC). O modelo de cargas flutuantes implementa os efeitos de polarização pelo método de Lagrangiano estendido, onde as variáveis extras são as próprias cargas parciais do íon poliatômico. O modelo FC foi parametrizado por meio de cálculos ab inito, aplicado ao ânion carbonato. Cálculos de Química Quântica ab initio foram utilizados para corroborar o modelo proposto para o ânion carbonato. Os sistemas investigados consistem em misturas de carbonatos alcalinos fundidos, Li2CO3/K2CO3, os quais são utilizados como eletrólitos em células a combustível. As simulações MD foram utilizadas para verificar o efeito da polarização dos ânions sobre a estrutura e dinâmica do líquido. Estudamos o efeito da inclusão de polarização sobre a condutividade do eletrólito.

THE DESIGN OF A POWER SYSTEM FOR A WIRELESS SENSOR NETWORK FOR LONG-TERM OPERATION

Wireless sensor networks (WSNs) have shown wide applicability to many fields including monitoring of environmental, civil, and industrial settings. WSNs however are resource constrained by many competing factors that span their hardware, software, and networking. One of the central resource constrains is the charge consumption of WSN nodes. With finite energy supplies, low charge consumption is needed to ensure long lifetimes and success of WSNs. This thesis details the design of a power system to support long-term operation of WSNs. The power system’s development occurs in parallel with a custom WSN from the Queen’s MEMS Lab (QML-WSN), with the goal of supporting a 1+ year lifetime without sacrificing functionality. The final power system design utilizes a TPS62740 DC-DC converter with AA alkaline batteries to efficiently supply the nodes while providing battery monitoring functionality and an expansion slot for future development. Testing tools for measuring current draw and charge consumption were created along with analysis and processing software. Through their use charge consumption of the power system was drastically lowered and issues in QML-WSN were identified and resolved including the proper shutdown of accelerometers, and incorrect microcontroller unit (MCU) power pin connection. Controlled current profiling revealed unexpected behaviour of nodes and detailed current-voltage relationships. These relationships were utilized with a lifetime projection model to estimate a lifetime between 521-551 days, depending on the mode of operation. The power system and QML-WSN were tested over a long term trial lasting 272+ days in an industrial testbed to monitor an air compressor pump. Environmental factors were found to influence the behaviour of nodes leading to increased charge consumption, while a node in an office setting was still operating at the conclusion of the trail. This agrees with the lifetime projection and gives a strong indication that a 1+ year lifetime is achievable. Additionally, a light-weight charge consumption model was developed which allows charge consumption information of nodes in a distributed WSN to be monitored. This model was tested in a laboratory setting demonstrating +95% accuracy for high packet reception rate WSNs across varying data rates, battery supply capacities, and runtimes up to full battery depletion.

Contrast discrimination with simultaneous monocular and dichoptic masks

In experiments reported elsewhere at this conference, we have revealed two striking results concerning binocular interactions in a masking paradigm. First, at low mask contrasts, a dichoptic masking grating produces a small facilitatory effect on the detection of a similar test grating. Second, the psychometric slope for dichoptic masking starts high (Weibull ß~4) at detection threshold, becomes low (ß~1.2) in the facilitatory region, and then unusually steep at high mask contrasts (ß~5.5). Neither of these results is consistent with Legge's (1984 Vision Research 24 385 - 394) model of binocular summation, but they are predicted by a two-stage gain control model in which interocular suppression precedes binocular summation. Here, we pose a further challenge for this model by using a 'twin-mask' paradigm (cf Foley, 1994 Journal of the Optical Society of America A 11 1710 - 1719). In 2AFC experiments, observers detected a patch of grating (1 cycle deg-1, 200 ms) presented to one eye in the presence of a pedestal in the same eye and a spatially identical mask in the other eye. The pedestal and mask contrasts varied independently, producing a two-dimensional masking space in which the orthogonal axes (10X10 contrasts) represent conventional dichoptic and monocular masking. The resulting surface (100 thresholds) confirmed and extended the observations above, and fixed the six parameters in the model, which fitted the data well. With no adjustment of parameters, the model described performance in a further experiment where mask and test were presented to both eyes. Moreover, in both model and data, binocular summation was greater than a factor of v2 at detection threshold. We conclude that this two-stage nonlinear model, with interocular suppression, gives a good account of early binocular processes in the perception of contrast. [Supported by EPSRC Grant Reference: GR/S74515/01]

Fixed or variable noise in contrast discrimination? The jury's still out

The ability to distinguish one visual stimulus from another slightly different one depends on the variability of their internal representations. In a recent paper on human visual-contrast discrimination, Kontsevich et al (2002 Vision Research 42 1771 - 1784) re-considered the long-standing question whether the internal noise that limits discrimination is fixed (contrast-invariant) or variable (contrast-dependent). They tested discrimination performance for 3 cycles deg-1 gratings over a wide range of incremental contrast levels at three masking contrasts, and showed that a simple model with an expansive response function and response-dependent noise could fit the data very well. Their conclusion - that noise in visual-discrimination tasks increases markedly with contrast - has profound implications for our understanding and modelling of vision. Here, however, we re-analyse their data, and report that a standard gain-control model with a compressive response function and fixed additive noise can also fit the data remarkably well. Thus these experimental data do not allow us to decide between the two models. The question remains open. [Supported by EPSRC grant GR/S74515/01]

Size matters, but not for everyone:Individual differences for contrast discrimination

It is very well known that contrast detection thresholds improve with the size of a grating-type stimulus, but it is thought that the benefit of size is abolished for contrast discriminations well above threshold (e.g., Legge, G. E., & Foley, J. M. (1980)]. Here we challenge the generality of this view. We performed contrast detection and contrast discrimination for circular patches of sine wave grating as a function of stimulus size. We confirm that sensitivity improves with approximately the fourth-root of stimulus area at detection threshold (a log-log slope of -0.25) but find individual differences (IDs) for the suprathreshold discrimination task. For several observers, performance was largely unaffected by area, but for others performance first improved (by as much as a log-log slope of -0.5) and then reached a plateau. We replicated these different results several times on the same observers. All of these results were described in the context of a recent gain control model of area summation [Meese, T. S. (2004)], extended to accommodate the multiple stimulus sizes used here. In this model, (i) excitation increased with the fourth-root of stimulus area for all observers, and (ii) IDs in the discrimination data were described by IDs in the relation between suppression and area. This means that empirical summation in the contrast discrimination task can be attributed to growth in suppression with stimulus size that does not keep pace with the growth in excitation. © 2005 ARVO.

The effect of interocular phase difference on perceived contrast

Binocular vision is traditionally treated as two processes: the fusion of similar images, and the interocular suppression of dissimilar images (e.g. binocular rivalry). Recent work has demonstrated that interocular suppression is phase-insensitive, whereas binocular summation occurs only when stimuli are in phase. But how do these processes affect our perception of binocular contrast? We measured perceived contrast using a matching paradigm for a wide range of interocular phase offsets (0–180°) and matching contrasts (2–32%). Our results revealed a complex interaction between contrast and interocular phase. At low contrasts, perceived contrast reduced monotonically with increasing phase offset, by up to a factor of 1.6. At higher contrasts the pattern was non-monotonic: perceived contrast was veridical for in-phase and antiphase conditions, and monocular presentation, but increased a little at intermediate phase angles. These findings challenge a recent model in which contrast perception is phase-invariant. The results were predicted by a binocular contrast gain control model. The model involves monocular gain controls with interocular suppression from positive and negative phase channels, followed by summation across eyes and then across space. Importantly, this model—applied to conditions with vertical disparity—has only a single (zero) disparity channel and embodies both fusion and suppression processes within a single framework.

Are HRM practices related with patient mortality in NHS hospitals?:A study examining the underlying reasons for such an association

This thesis will report details of two studies conducted within the National Health Service in the UK that examined the association between HRM practices related to training and appraisal with health outcomes within NHS Trusts. Study one represents the organisational analysis of 61 NHS Trusts, and will report training and appraisal practices were significantly associated with lower patient mortality. Specifically, the research will show significantly lower patient mortality within NHS Trusts that: a) had achieved Investors in People accreditation; b) had a formal strategy document relating to training; c) had tailored training policy documents across occupational groups; d) had integrated training and appraisal practices; e) had a high percentage of staff receiving either an appraisal or updated personal development plan. There was also evidence of an additive effect where NHS Trusts that displayed more of these characteristics had significantly lower patient mortality. Study one in this thesis will also report significantly lower patient mortality within the NHS Trusts where there was broad level representation for the HR function. Study two will report details of a study conducted to examine the potential reasons why HR practices may be related to hospital performance. Details are given of the results of a staff attitudinal survey within five NHS Trusts. This study examined will show that a range of developmental activity, the favourability of the immediate work environment (in relation to social support and role stressors) and motivational outcomes are important antecedents to citizenship behaviours. Furthermore, the thesis will report that principles of the demand-control model were adopted to examine the relationship between workplace support and role stressors, and workplace support, influence, and an understanding of role expectation help mitigate against the negative effects of work demands upon motivational outcomes.

Child parent dyadic treatment for anxiety disorders in youths

There is evidence for the efficacy of treatments for childhood anxiety disorders; however, less is known about whether including parents in the child's treatment enhances child treatment response. There also are few studies that have examined predictors of treatment completion/non-completion and success/failure. In this dissertation, a child focused individual treatment was compared to a dyadic child-parent treatment. In dyadic, parent anxiety symptoms and child-parent relationships were targeted. Based on the Transfer of Control Model proposed by Silverman and Kurtines (1996a, b, 2005), it was hypothesized that treatment changes in parent anxiety symptoms and child-parent relationships would be related to positive child treatment response. ^ Participants were 119 youths (ages 6 to 16 years, M = 9.93 SD = 2.75; 68 girls) and their parents. All youth were born in the U.S. but had various backgrounds; 40 were European American, 73 were Latinos/as, 6 were of other ethnic backgrounds or did not report their ethnicity. Participants signed informed consent (assent for youths) and completed a pretreatment assessment. Participants were randomized to a child individual treatment or dyadic treatment, were assessed immediately after treatment and one year post treatment. Findings showed that treated youths improved across all measures over time. Comparison of treatment conditions across all measures showed no statistically significant differences between the child individual and dyadic treatment. Reductions in parent anxiety symptoms and improvements in child-parent relationships were significantly related to child treatment change at posttreatment and at one year follow-up across treatments. No factors differentiated completers from non-completers and only parent reported child internalizing behavior problems were significantly negatively related to child treatment response. ^ The study findings support a premise of the Transfer of Control Model that changes in parent anxiety symptoms and child-parent relationships are related to child treatment response. The study findings show that children can be successfully treated when parents are included as co-clients in dyadic treatment, thereby supporting the utility of this approach in practice. ^

Mechanism that dictates pore width and <111>a pore propagation in InP

We report a mechanism for pore growth and propagation based on a three-step charge transfer model. The study is supported by electron microscopy analysis of highly doped n-InP samples anodised in aqueous KOH. The model and experimental data are used to explain propagation of pores of characteristic diameter preferentially along the <111>A directions. We also show evidence for deviation of pore growth from the <111>A directions and explain why such deviations should occur. The model is self-consistent and predicts how carrier concentration affects the internal dimensions of the porous structures.

THE DESIGN OF A POWER SYSTEM FOR A WIRELESS SENSOR NETWORK FOR LONG-TERM OPERATION

Wireless sensor networks (WSNs) have shown wide applicability to many fields including monitoring of environmental, civil, and industrial settings. WSNs however are resource constrained by many competing factors that span their hardware, software, and networking. One of the central resource constrains is the charge consumption of WSN nodes. With finite energy supplies, low charge consumption is needed to ensure long lifetimes and success of WSNs. This thesis details the design of a power system to support long-term operation of WSNs. The power system’s development occurs in parallel with a custom WSN from the Queen’s MEMS Lab (QML-WSN), with the goal of supporting a 1+ year lifetime without sacrificing functionality. The final power system design utilizes a TPS62740 DC-DC converter with AA alkaline batteries to efficiently supply the nodes while providing battery monitoring functionality and an expansion slot for future development. Testing tools for measuring current draw and charge consumption were created along with analysis and processing software. Through their use charge consumption of the power system was drastically lowered and issues in QML-WSN were identified and resolved including the proper shutdown of accelerometers, and incorrect microcontroller unit (MCU) power pin connection. Controlled current profiling revealed unexpected behaviour of nodes and detailed current-voltage relationships. These relationships were utilized with a lifetime projection model to estimate a lifetime between 521-551 days, depending on the mode of operation. The power system and QML-WSN were tested over a long term trial lasting 272+ days in an industrial testbed to monitor an air compressor pump. Environmental factors were found to influence the behaviour of nodes leading to increased charge consumption, while a node in an office setting was still operating at the conclusion of the trail. This agrees with the lifetime projection and gives a strong indication that a 1+ year lifetime is achievable. Additionally, a light-weight charge consumption model was developed which allows charge consumption information of nodes in a distributed WSN to be monitored. This model was tested in a laboratory setting demonstrating +95% accuracy for high packet reception rate WSNs across varying data rates, battery supply capacities, and runtimes up to full battery depletion.

Mellanchefers upplevelser av psykosocial arbetsmiljö inom distributions- och logistikverksamhet – en pendling mellan hög aktivitet och låg stress?

Forskarnas genuina intresse för den psykosociala arbetsmiljön med koppling mellanchefer gav upphov till att dyka djupare inom området och belysa centrala delar i form av krav, kontroll och socialt stöd. Framåtskridandet går mot en ökad medvetenhet kring den psykosociala arbetsmiljön, då ohälsan i arbetslivet ökar och Arbetsmiljöverkets nya föreskrift om organisatorisk och social arbetsmiljö är i fokus. I linje med en ökad medvetenhet som sker kring den psykosociala arbetsmiljön vill vi rikta ett särskilt fokus till mellanchefer som bör ha en förmåga att hantera krav både uppifrån och ned. Studien har främst utgått från Robert Karaseks och Töres Theorells Krav – kontroll – stödmodellen. Syftet är att undersöka mellanchefers upplevelse med fokus på den psykosociala arbetsmiljön i ett privat företag inom distributions- och logistikverksamhet. Metoden har bestått av en kvalitativ metod i form av en fallstudie där semistrukturerade intervjuer ligger som grund med åtta respondenter ifrån distributionscentret. Resultatet uppvisar att mellancheferna har en hög grad av inflytande, upplevelsen av arbetskrav varierar men i koppling till befattningen är kraven rimliga. Det sociala stödet upplevs som bra på arbetsplatsen och anses av funktionscheferna som en viktig och central del i arbetet. Slutsatser som har uppnåtts är att funktionscheferna har rimliga krav och upplever en bra nivå av kontroll i arbetet, men att ha en alltför hög kontroll i arbetet kan leda till negativ stress. En balans i pendlingen mellan aktiva arbeten och lågstressarbeten anses vara en fördel för att bevara en god psykosocial arbetsmiljö. Detta för att motverka de negativa effekterna som kan uppstå av att befinna sig inom varje komponent för länge. I studien har det påvisats att företaget anses ha en god psykosocial arbetsmiljö och därmed kan ses som ett gott exempel i arbetslivet.

Indirect Effects of Parental Coping on Children’s Psychosocial Adjustment in the Context of Pediatric Cancer

Thesis (Ph.D.)--University of Washington, 2016-08