Laadun kehittäminen suomalaisissa yrityksissä

Laadun ja sen kehittämisen sisältö on ollut jatkuvassa muutostilassa. Laatuajattelu on laajentunut käsittämään yhä suuremman osan organisaatioiden toiminnasta. Laadun kehittämisessä on jatkuvasti otettu käyttöön uusi kehittämiskeinoja. Laaja-alaisesti organisaation toimintaan kytkeytyvistä keinoista tunnetuimpia ovat erilaiset laadunhallintajärjestelmät ja itsearviointi eri kriteeristöjen avulla. Tämän tutkimuksen tavoitteina olivat: a) etsiä motiiveja, minkä vuoksi yritykset ovat alkaneet kehittää laatuaan, b) tutkia total quality management (TQM) -ajattelun soveltamisen syvällisyyden vaikutuksia, c) selvittää laadunkehittämistyön ajallisen keston vaikutuksia, ja d) saada kokonaiskuva keskeisimpien laadun kehittämiskeinojen toteutuksesta ja menestyksellisyydestä. Työn teoriaosassa paneuduttiin laatu-käsitteeseen yritystoiminnassa, laatu- ja TQM-ajattelun sisältöön sekä laadun kehittämisen johtamiseen. Lisäksi tutkittiin keskeisimpiä laadun kehittämisen keinoja, joita olivat mm. ihmisten toiminta, laadunhallintajärjestelmät, itsearvioinnit, toimintaprosessien kehittäminen, asiakas- ja toimittajayhteistyö. Tutkimuksen empiirisessä osassa tutkittiinem. laadun kehittämiseen liittyviä asioita suomalaisissa yrityksissä. Aineisto kerättiin haastattelemalla yritysten laadun kehittämisestä vastaavia henkilöitä 24 yrityksessä. Tulosten esittämisessä hyödynnettiin tilastollisia tutkimusmenetelmiä kvalitatiivisten menetelmien ohella. Tässä aineistossa asiakasvaatimukset ja oma kehityshalu nousivat yleisimmiksi tärkeimmistä laadun kehittämisen aloitusmotiiveista. Mikään tärkeimmistä aloitusmotiiveista ei ollutkuitenkaan johtanut selkeästi ylivoimaisimpaan menestymiseen myöhemmin. TQM-ajattelun laaja-alainen soveltaminen johti laadun kehittämisen kannalta positiiviseen suuntaan. Pisimpään laatuaan kehittäneet yritykset olivat suuria ja kansainvälisesti suuntautuneita. Pelkkä kehitystyön ajallinen kesto näkyi vain vähän kehittämisen eri osa-alueilla. Laadun kehittämistyön menetyksellisyyden kannalta positiivia asioita olivat: henkilöstön aktiivisuus, itsearviointien hyödyntäminen, toimintaprosessien kuvaaminen ja kehittäminen, sekä asiakas- ja toimittajayhteistyö. Laadun kehittämiseen kannattaa ottaa aktiivisesti mukaankoko organisaation henkilöstö. Itsearviointien käytöllä on mahdollista kehittääorganisaatiota laaja-alaisesti. Niin asiakkaat kuin toimittajat kannattaa ottaaaktiivisesti mukaan kehittämistoimintaan. Se on kaikkien osapuolien yhteinen etu.

Mass transfer and particleinteractions in granular systems and suspension flows

The purpose of this study was to investigate some important features of granular flows and suspension flows by computational simulation methods. Granular materials have been considered as an independent state ofmatter because of their complex behaviors. They sometimes behave like a solid, sometimes like a fluid, and sometimes can contain both phases in equilibrium. The computer simulation of dense shear granular flows of monodisperse, spherical particles shows that the collisional model of contacts yields the coexistence of solid and fluid phases while the frictional model represents a uniform flow of fluid phase. However, a comparison between the stress signals from the simulations and experiments revealed that the collisional model would result a proper match with the experimental evidences. Although the effect of gravity is found to beimportant in sedimentation of solid part, the stick-slip behavior associated with the collisional model looks more similar to that of experiments. The mathematical formulations based on the kinetic theory have been derived for the moderatesolid volume fractions with the assumption of the homogeneity of flow. In orderto make some simulations which can provide such an ideal flow, the simulation of unbounded granular shear flows was performed. Therefore, the homogeneous flow properties could be achieved in the moderate solid volume fractions. A new algorithm, namely the nonequilibrium approach was introduced to show the features of self-diffusion in the granular flows. Using this algorithm a one way flow can beextracted from the entire flow, which not only provides a straightforward calculation of self-diffusion coefficient but also can qualitatively determine the deviation of self-diffusion from the linear law at some regions nearby the wall inbounded flows. Anyhow, the average lateral self-diffusion coefficient, which was calculated by the aforementioned method, showed a desirable agreement with thepredictions of kinetic theory formulation. In the continuation of computer simulation of shear granular flows, some numerical and theoretical investigations were carried out on mass transfer and particle interactions in particulate flows. In this context, the boundary element method and its combination with the spectral method using the special capabilities of wavelets have been introduced as theefficient numerical methods to solve the governing equations of mass transfer in particulate flows. A theoretical formulation of fluid dispersivity in suspension flows revealed that the fluid dispersivity depends upon the fluid properties and particle parameters as well as the fluid-particle and particle-particle interactions.

The Impact of a Character Posture Model on the Communication of Affect in an Immersive Virtual Environment

This paper presents the quantitative and qualitative findings from an experiment designed to evaluate a developing model of affective postures for full-body virtual characters in immersive virtual environments (IVEs). Forty-nine participants were each requested to explore a virtual environment by asking two virtual characters for instructions. The participants used a CAVE-like system to explore the environment. Participant responses and their impression of the virtual characters were evaluated through a wide variety of both quantitative and qualitative methods. Combining a controlled experimental approach with various data-collection methods provided a number of advantages such as providing a reason to the quantitative results. The quantitative results indicate that posture plays an important role in the communication of affect by virtual characters. The qualitative findings indicated that participants attribute a variety of psychological states to the behavioral cues displayed by virtual characters. In addition, participants tended to interpret the social context portrayed by the virtual characters in a holistic manner. This suggests that one aspect of the virtual scene colors the perception of the whole social context portrayed by the virtual characters. We conclude by discussing the importance of designing holistically congruent virtual characters especially in immersive settings.

Las reglas de la mayoría y Borda: un ejercicio de simulación

En el presente documento se describe un ejercicio de simulación orientado a facilitar la comprensión y asimilación del funcionamiento de la votación por mayoría y la regla de Borda. El ejercicio consiste en proponer a los alumnos que escojan entre dos proyectos (un programa de becas y una ampliación de las aulas de estudio) que presuntamente se van a realizar en la facultad en la que estudian. Para determinar qué proyecto se debería llevar a cabo se utiliza las reglas de la mayoría y Borda. Los alumnos deben responder a diversas rondas de votaciones donde el orden de la votación o agenda ha sido determinada por el instructor. El ejercicio es útil para exponer y debatir las cuestiones que se explican en un curso estándar de Hacienda Pública sobre el uso de la regla de la mayoría y la regla de Borda, como por ejemplo, la existencia de ciclos en los resultados de una votación, la posibilidad de condicionar el resultado de las votaciones mediante la manipulación de la agenda, el comportamiento estratégico, la formación de coaliciones, las propiedades del teorema de Arrow y la eficiencia de la(s) diferentes alternativas escogidas. El ejercicio se enmarca como parte de las actividades realizadas por el Grupo de Innovación Docente (GID-HAL) de la Universidad de Barcelona.

Emergent patterns of social organization in captive Cercocebus torquatus: Testing the GrooFiWorld agent-based model

We empirically applied the GrooFiWorld agent-based model (Puga-González et al. 2009) in a group of captive mangabeys (Cercocebus torquatus). We analysed several measurements related to aggression and affiliative patterns. The group adopted a combination of despotic and egalitarian behaviours resulting from the behavioural flexibility observed in the Cercopithecinae subfamily. Our study also demonstrates that the GrooFiWorld agent-based model can be extended to other members of the Cercopithecinae subfamily generating parsimonious hypotheses related to the social organization.

Anàlisi mitjançant mecànica de fluids computacional d’un aerogenerador minieòlic

A la UdGhi ha 2 aerogeneradors minieòlics: el del terrat del P2 i un de més petit allaboratori d’energies. Aquest segon aerogenerador minieòlic és el que s’ha utilitzat en aquestprojecte. Es tracta d’un Air-X de la casa Technosun amb les següents característiques:- Té un pes de 6Kg, un radi de 0,582 metres, un TSR de 8,8 i unapotència de 545W.- Perfil de la pala tipus SD2030.- Velocitat d’engegada de 3m/s.-Amb vents forts (més de 15m/s) un dispositiu electrònic redueix lavelocitat fins a 600rpm, reduint les càrregues sobre la turbina i l’estructuramentre encara segueix produint energia.- Baix manteniment. Només consta de dues parts mòbils.L’objecte que s’ha plantejat per aquest projecte ha estat trobar la corbade potència del minigenerador Air-X mitjançant simulació amb CFD, iutilitzant només les dades geomètriques de l’aparell

Efectos Visuales de las Aceleraciones Positivas Simulados por Ordenador

El artículo describe la simulación por ordenador digital de los efectos visuales en el organismo humano sometido a aceleraciones prositivas en sentido craneocaudal. Los resultados obtenidos posibilitan la utilización de un método complementario para la evaluación de la tolerancia a las aceleraciones positivas.

Precursor nanoscale modulations in ferromagnets: Modeling and thermodynamic characterization

Using a Ginzburg-Landau model for the magnetic degrees of freedom with coupling to disorder, we demonstrate through simulations the existence of stripelike magnetic precursors recently observed in Co-Ni-Al alloys above the Curie temperature. We characterize these magnetic modulations by means of the temperature dependence of local magnetization distribution, magnetized volume fraction, and magnetic susceptibility. We also obtain a temperature-disorder strength phase diagram in which a magnetic tweed phase exists in a small region between the paramagnetic and dipolar phases.

Analyzing customer profitability: an empirical study

The purpose of this study was to define the customer profitability of the case company as well as to specify the factors that explain customer profitability. The study was made with a quantitative research method. The research hypotheses were formulated mainly on the grounds of previous research, and were tested with statistical research methods. The research results showed that customer profitability is not equally distributed among the customers of the case company, and the majority of its customers is profitable. The interpreters for absolute customer profitability were sales volume and the customer’s location region. The interpreters for relative customer profitability were the customer’s location region and the product segment into which a customer can be classified on the basis of the products that were sold to this customer.

Cohesive Elements for Shells

A cohesive element for shell analysis is presented. The element can be used to simulate the initiation and growth of delaminations between stacked, non-coincident layers of shell elements. The procedure to construct the element accounts for the thickness offset by applying the kinematic relations of shell deformation to transform the stiffness and internal force of a zero-thickness cohesive element such that interfacial continuity between the layers is enforced. The procedure is demonstrated by simulating the response and failure of the Mixed Mode Bending test and a skin-stiffener debond specimen. In addition, it is shown that stacks of shell elements can be used to create effective models to predict the inplane and delamination failure modes of thick components. The results indicate that simple shell models can retain many of the necessary predictive attributes of much more complex 3D models while providing the computational efficiency that is necessary for design

Una pràctica de simulació de cas: la resolució de problemes i el procés diagnòstic

En aquest article presentem una experiència docent dins de l’àmbit de la Psicologia del Pensament. Es tracta d’una activitat d’aprenentatge basat en problemes en la qual els estudiants han de reflexionar sobre com determinats continguts de l’assignatura, els de resolució de problemes, estan fortament relacionats amb la seva futura pràctica professional i amb el desenvolupament del seu aprenentatge des de psicòlegs novells a psicòlegs experts. En este artículo presentamos una experiencia docente en el ámbito de la Psicología del Pensamiento. Se trata de una actividad de aprendizaje basado en problemas en la que los estudiantes han de reflexionar sobre cómo determinados contenidos de la asignatura, los de resolución de problemas, estan fuertemente relacionados con su futura práctica profesional y con el desarrollo de su aprendizaje desde psicólogos novatos a psicólogos expertos

Tilastollista mallinnusta luonnontieteiden sovelluksiin

Kirjallisuusarvostelu

Modeling of residual stresses and distortion due to welding in fillet welds

Welding has a growing role in modern world manufacturing. Welding joints are extensively used from pipes to aerospace industries. Prediction of welding residual stresses and distortions is necessary for accurate evaluation of fillet welds in relation to design and safety conditions. Residual stresses may be beneficial or detrimental, depending whether they are tensile or compressive and the loading. They directly affect the fatigue life of the weld by impacting crack growth rate. Beside theoretical background of residual stresses this study calculates residual stresses and deformations due to localized heating by welding process and subsequent rapid cooling in fillet welds. Validated methods are required for this purpose due to complexity of process, localized heating, temperature dependence of material properties and heat source. In this research both empirical and simulation methods were used for the analysis of welded joints. Finite element simulation has become a popular tool of prediction of welding residual stresses and distortion. Three different cases with and without preload have been modeled during this study. Thermal heat load set is used by calculating heat flux from the given heat input energy. First the linear and then nonlinear material behavior model is modeled for calculation of residual stresses. Experimental work is done to calculate the stresses empirically. The results from both the methods are compared to check their reliability. Residual stresses can have a significant effect on fatigue performance of the welded joints made of high strength steel. Both initial residual stress state and subsequent residual stress relaxation need to be considered for accurate description of fatigue behavior. Tensile residual stresses are detrimental and will reduce the fatigue life and compressive residual stresses will increase it. The residual stresses follow the yield strength of base or filler material and the components made of high strength steel are typically thin, where the role of distortion is emphasizing.

University Image vs. University Identity: Congruence between Expectations and Experience

The aim of this thesis was to examine congruencies between university identity and university images of prospective and current students. Therefore, factors essentially influencing on expected and experienced university images were identified. Providing an understanding on the differences in the formation of both concepts allowed the analysis of potential incongruities between a university’s identity and the perceptions its students hold. The study was conducted in July and August 2013 at Lappeenranta University of Technology by means of a web-based research survey. The sample consisted of 160 international Master’s degree students who were admitted in 2011, 2012 and 2013. Descriptive and multivariate statistical analysis methods were used to process the data. The results of the study indicated statistically significant incongruities between the case university’s identity and its students’ images. Further, the expected and experienced university images showed incongruities to each other. Deviations were additionally detected to be dependent on the students’ home regions. All in all, there is potential for an improvement of the students’ experiences resulting from a low perception of the student’s preparation for future job life.

Yrittäjyyskasvatus yhteistyöverkostoissa

Tutkimus käsittelee Yrittäjyyskasvatuksen Mittariston -projektia, jossa tutkimuskohteena on peruskoulun ensimmäisen asteen luokan- ja aineenopettajien näkemys ja kokemus yrittäjyyskasvatuksen verkostoyhteistyöstä. Tutkimuksen tarkoituksena oli selvittää miten hyvin opettajat tuntevat verkostoyhteistyötä, mikä on heidän tietämyksensä yrittäjyyskasvatuksesta ja kuinka tämä näkyy heidän työssään ja opetuksessaan. Tutkimuksen otos on 450 opettajaa. Tulokset analysoitiin SPSS-tilastomenetelmäohjelmalla. Tilastollisina tutkimusmenetelminä käytettiin jakaumien frekvenssianalyysiä, Faktori­analyysin Pääkomponenttianalyysiä ja Kaksisuuntaista varianssianalyysia (Anova). Tutkimuksen johtopäätöksenä voidaan todeta, että opettajien tiedot yhteistyö-verkostojen tarjoamista palveluista ovat hyvin hajanaiset. Ongelma jatkuu helposti niin kauan kunnes opettajien koulutusohjelmaan tuodaan lisää yrittäjyyskasvatus- ja yrittäjyysopintoja. Tämä pitäisi huomioida myös tulevissa opetussuunnitelmissa. Tämän tutkimuksen tavoitteena oli tuoda esille Yrittäjyyskasvatuksen mittariston tulosten kautta yrittäjyyskasvatuksen nykytila, tuoda ratkaisuja ehdotusten kautta opetukseen ja herättää keskustelua yrittäjyyskasvatuksen parantamiseksi.