Teknisen tukkukaupan asiakastoimitusprosessin hallinta ja kehittäminen

Työn tavoitteena oli kartoittaa teknisen tukkukaupan asiakastoimitusprosessin eri vaiheet ja tarjota ratkaisuvaihtoehtoja kuljetusvirheisiin johtavien prosessin vaiheiden kehittämiseksi ja asiakastyytyväisyyden parantamiseksi. Tutkimuksen taustamateriaalia analysoimalla saatiin perusteet käytännön selvitystyön rajaamiseksi pakkaus-, lähettämö- ja lastaustoimintaan sekä kuljetusliikkeiden toimintatapojen tarkasteluun. Selvitystyön perusteella tehtiin johtopäätös, että kuljetusvirheisiin johtavien virhelähteiden ei voida konkreettisesti osoittaa olevan jossain tietyssä prosessin vaiheessa. Merkittävimpiä ongelmakohtia ovat lähettämötoiminnan kontrolloimattomuus sekä lähtevän tavaran puutteelliset merkinnät ja huolimaton käsittely. Tämän seurauksena keskeisiä kuljetusvirheitä ovat tuotteiden katoaminen ja rikkoutuminen. Tutkimustuloksena todetaan, että hyvin organisoidun lähettämötyöskentelyn, selkeiden merkintöjen ja elektronisten seurantajärjestelmien avulla on mahdollista parantaa asiakastoimitusprosessin hallittavuutta sekä vähentää virheiden määrää merkittävästi. Työn lopuksi tehtiin Access –tietokannasta saatuun reaaliaikaiseen reklamaatiodataan perustuva analyysi. Analyysi vahvisti sen, että kuljetusvirheiden määrässä tai syissä ei ole tapahtunut olennaisia muutoksia tutkimuksen aikana eli tutkimustulokset ovat valideja. Analyysiin perustuen tehtiin myös johtopäätös, että tulevaisuudessa pitää panostaa keräilyvirheiden määrän vähentämiseen analysoimalla niiden taustalla olevia tekijöitä.

Kuivumiskutistuman yhteys massaseosten ominaisuuksien synergiseen käyttäytymiseen

Diplomityön tavoitteena oli selvittää kuivumiskutistuman yhteyttä massojen synergiseen käyttäytymiseen. Kirjallisuusosassa on pohdittu kuitujen, kuitujen koostumuksen ja massaseosten ominaisuuksien vaikutusta kuivumiskutistumiseen. Lisäksi on pohdittu erilaisten kuivatustapojen vaikutusta kuivumiskutistuman suuruuteen ja SC-paperin mekaanisiin ominaisuuksiin. Kokeellisessa osassa valmistettiin kiertovedellä seosarkkeja. Massoina seoksissa käytettiin hioketta, TMP:tä ja kahta eri valmistajan sellua, jotka molemmat koostuivat kuusesta ja männystä. Seosarkkeja kuivattiin vapaasti, estetysti ja siten, että arkkia vedettiin konesuunnassa 2 % ja siten, että arkin annettiin kutistua konesuunnassa 2 %. Vapaasti kutistuneista arkeista mitattiin kuivumiskutistuma, käyttäen mahdollisimman tarkkaa menetelmää, jotta saatiin selville kunkin massaseoksen ja puhtaan massan kutistumapotentiaali. Kokeellisen osan mittaustulosten perusteella työssä pohdittiin kuivumiskutistumisen yhteyttä massojen synergiseen käyttäytymiseen. Tuloksista käy ilmi, että kuivumiskutistumalla on yhteys massaseosten synergiseen käyttäytymiseen. Kuivumiskutistuma vaikuttaa eniten selluilla, joilla on suurin kutistumispotentiaali. Arkin kuivuessa, kuitujen kutistuessa, rikkoutuu arkissa jo syntyneitä sidoksia heikentäen mm. vetolujuutta. Sidoksien rikkoutuminen ilmenee selvästi valonsironnan kasvamisena, mutta myös palstautumislujuuden huonontumisena, joka kertoo sidosten vähentymisestä. Selluosuuden kasvattaminen vaikuttaa useimpien arkin ominaisuuksia huonontaen ja siis synergiaa huonontaen. Puhtaita massoja vertaillessa puhtailla selluilla on useimpien ominaisuuksien kohdalla huonoimmat suhteellisesti saavutetut lujuudet, joten selluista ei saada kaikkea lujuuspotentiaalia, mikä taas näkyy selvästi selluosuuden kasvaessa suurempana poikkeamina additiivisesti lasketuista lujuuksista. Mekaanisilla massoilla, joilla on pienempi kuivumiskutistuma, ei vaikutus ole niin voimakas kuin selluilla ja puhtaat mekaaniset massat säilyttävätkin ominaisuutensa paremmin kuin sellut.

Kationinvaihtohartsien hapetuskestävyys

Hyvin puhdasta vettä vaativissa sovelluksissa käytettävät kationinvaihtohartsit eivät saisi vuotaa puhdistettavaan veteen mitään vieraita aineita. Todellisuudessa hartsit kuitenkin vuotavat hyvin pieniä määriä erilaisia yhdisteitä käytön aikana. Aineet, joita kationinvaihtohartsi päästää veteen, ovat osaksi hartsin polymerointireaktion aikana sen rungon sisään jääneitä yhdisteitä. Nämä voidaan suurimmaksi osaksi poistaa pesemällä hartsia. Osittain niitä syntyy myös hartsin polystyreenidivinyylibentseenirungon (PS-DVB) hapettuessa. Hapettumisen seurauksena syntyneet yhdisteet ovat pääosin orgaanisia sulfonaatteja. Tämä työ koskee ydinvoimalaitoksissa käytettäviä pulverihartseja, joita käytetään primääripiirissä kiertävän lauhdeveden puhdistukseen ja jotka joutuvat siellä alttiiksi hapettumiselle. Yleensä hapettuminen on hidasta ja se johtuu veteen liuenneesta hapesta. Hapettuminen nopeutuu huomattavasti, jos vedessä on läsnä hapettimia tai siirtymämetalli-ioneja. Tällaisia hapettimia ovat esimerkiksi vetyperoksidi, otsoni, vapaa kloori, typpihappo ja kromi. Vetyperoksidin vaikutuksesta hartsin runkoon muodostuu hydroperoksidiryhmä, jonka hajoamisesta alkaa reaktioiden sarja, joka lopulta johtaa hartsin polymeerirungon katkeamiseen. Siirtymämetalli-ionit katalysoivat peroksidien hajoamista. Tavallisimpia hapetusta katalysoivia metalli-ioneja ovat rauta ja kupari, joiden katalyyttinen aktiivisuus on suuri. Tässä työssä pyrittiin selvittämään, onko mahdollista valmistaa hartseja, jotka kestävät hapettumista paremmin kuin nykyisin käytössä olevat hartsit. Sen tutkimiseksi tehtiin kiihdytettyjä hapetuskokeita käyttäen hapettimena vetyperoksidia ilman siirtymämetalli-ioni katalyyttejä. Hapetuskokeet tehtiin kaupallisesti saatavilla hartseilla ja uusilla työtä varten syntetisoiduilla koehartseilla. Hapetuskokeiden etenemistä seurattiin mittaamalla veteen liuenneiden orgaanisten aineiden kokonaismäärää (TOC-analyysi) ja liuoksessa esiintyvien orgaanisten sulfonaattien määrää johtokykymittauksin. Saadut tulokset antoivat viitteitä siitä, että hartsin synteesiolosuhteilla voi olla suurempi vaikutus sen hapetuskestävyyteen kuin synteesissä käytetyillä raaka-aineilla.

Small-size pines suitability for glueboards

The aim of the research was to evaluate the suitability of small-size pine as a raw material for glueboard. A further aim was to investigate claims that dead knots and the twisting of the heartwood cause, quality problems in the but of the small-size pine. The theoretical framework of the study details the whole manufacturing process from raw material to the finished article; the description of the qualities of raw material, the sawing and drying processes as well as the making of the glueboard. The solve the research problem the following figures were calculated: amount of small-size pines, the yield and quality of sawn timber which can be used for making glueboard as well as the variables which affect the various stages of the process. The results show that about half of the timber from the thinning process was suitable material for sawing. The most common problem with the unsuitable timber was form defects of the stem. The average usage ratio of sawing was 2,31 k-m3/m3. 87,97 % of the sawn timber could be used for the production of glueboard. The unsuitability of sawn timber for making glueboard was mainly caused by breakage and the twisting of the heartwood. Dead knots were small and did not effect the quality of the but of the small-size pine. It can therefore be concluded that small-size pine is suitable raw material for glueboard.

Coatings on Composites

Polymer based composite materials coated with thin layers of wear resistant materials have been proposed as replacements for steel components for certain applications with the advantage of reduced mass. Magnetron sputtered coatings can be successfully deposited on composite materials. Nevertheless there are number of issues which must be addressed such as limited temperature, which the composite can withstand because of the epoxy binder which is used, the adhesion of the coating to the composite and the limited mechanical support, the hard coating can obtain from the relatively soft epoxy. We have investigated the deposition of chromium nitride, titanium carbide and titanium doped DLC coatings on carbon fibre reinforced composites and various polymers. The adhesion of the coatings has been studied by the pull-off adhesion tester. In general, the failure mechanism has been noticed to be due to the cohesive failure for a wide range of conditions. The wear behavior of the coatings has been noticed to be complicated. Wear tests on coated composites have shown that where the reinforcing fibres are near the surface, the composite samples do not perform well due to breakage of the fibres from the polymer matrix. A fibre free surface has been noticed to improve the wear resistance.

Tensoatividade de ácidos húmicos de procedências distintas

The surface activity of humic acids (HA) is a parameter which might be considered in the evaluation of all types of aggregation of these substances. In this work the surface tension of aquatic and terrestrial-HA aqueous solutions was observed under varied conditions of pH, concentration and ionic strength. Results showed that HA present surface activity for a extent range of concentration. The surface tension decreases with HA concentration increasing and, for all samples exist a concentration value above which a reduction in the rate of the solute migration to the solution surface is observed. This value is sensibly reduced and sharpened with the increasing of the ionic strength. Surface tension is also reduced with the acidity increasing, being a minimum reached between pH 3 and 5. Observed effects are explained in view of conformational arrangements of HA which tend to agglomerate in micelle-like domains in aqueous solutions.

Removal of chromium (vi) in aqueous environments using cork and heat-treated cork samples from quercus cerris and quercus suber

Chromium (VI) removal and its reduction to chromium (III) from aqueous solution by untreated and heat-treated Quercus cerris and heat-treated Quercus suber black agglomerate cork granules was investigated. Initial screening studies revealed that among the sorbents tested, untreated Q. cerris and Q. suber black agglomerate are the most efficient in the removal of Cr(VI) ions and were selected for adsorption essays. Heat treatment adversely affected chromium adsorption and chromium (VI) reduction in Q. cerris cork. The highest metal uptake was found at pH 3.0 for Q. cerris and pH 2.0 for black agglomerate. The experimental data fitted the Langmuir model and the calculated qmax was 22.98 mg/g in black agglomerate and 21.69 mg/g in untreated Q. cerris cork. The FTIR results indicated that while in black agglomerate, lignin is the sole component responsible for Cr(VI) sorption, and in untreated Q. cerris cork, suberin and polysaccharides also play a significant role on the sorption. The SEM-EDX results imply that chromium has a homogenous distribution within both cork granules. Also, phloemic residues in Q. cerris granules showed higher chromium concentration. The results obtained in this study show that untreated Q. cerris and black agglomerate cork granules can be an effective and economical alternative to more costly materials for the treatment of liquid wastes containing chromium

MÉTODOS DE EXTRAÇÃO DE POLI-HIDROXIALCANOATOS A PARTIR DE BIOMASSA BACTERIANA

Polyhydroxyalkanoates (PHAs) are biodegradable and biocompatible polyesters intracellularly accumulated by many bacteria as an energy reserve material and carbon source. These biopolymers may be extracted from cells after their production phase, and the extraction process involves various individual operations to ensure adequate removal of the biopolymer from the cells. During this process, the following aspects should be considered: reduction of product losses during different stages of the process to obtain a highly pure product, preservation of physical and thermal characteristics, and use of low toxicity chemicals to achieve sustainable production and avoid harming the environment. The impact of the costs of PHA extraction on the total cost of the production process may account for over 50% of the end-value of the product. Within this context, several methods of PHA extraction have been reported in the literature. These methods include the use of solvents, chemical digestion, enzymatic digestion, mechanical extraction with high-pressure homogenization and ultrasound, extraction using supercritical fluids, or a combination of these methods. The present review of the literature shows strategies for extraction processes of PHAs produced by bacteria involving cell destabilization and/or breakage, recovery, and purification of the biopolymer.

Viscometric investigations and molecular interactions of some derivatives of 5-substituted indole dihydropyrimidines in mixed organic solvents

Colloid chemical behavior of indole dihydropyrimidines in non-aqueous solvent mixture benzene-methanol of varying composition has been investigated by viscometric measurements at 303K± 0.1. The viscosity of the system increases with the increase in concentration. The Trend Change Point (TCP) values have been determined by intersection of two straight lines, which are found to be dependent on the composition of solvent mixtures. The study confirms that the nature of synthesized compounds agglomerate formed below and above 50% benzene concentration is quite different. The viscometric data have been analyzed in terms of Einstein, Vand, Moulik and Jones-Dole equations. These well known equations have been successfully applied to explain the results of viscosity measurements and the viscometric parameters show that the behavior of compound changes in the proximity of 50% benzene concentration.

On the numerical simulation of machining processes

Numerical simulation of machining processes can be traced back to the early seventies when finite element models for continuous chip formation were proposed. The advent of fast computers and development of new techniques to model large plastic deformations have favoured machining simulation. Relevant aspects of finite element simulation of machining processes are discussed in this paper, such as solution methods, material models, thermo-mechanical coupling, friction models, chip separation and breakage strategies and meshing/re-meshing strategies.

FANCD2 Western blot as a diagnostic tool for Brazilian patients with Fanconi anemia

Fanconi anemia is a rare hereditary disease showing genetic heterogeneity due to a variety of mutations in genes involved in DNA repair pathways, which may lead to different clinical manifestations. Phenotypic variability makes diagnosis difficult based only on clinical manifestations, therefore laboratory tests are necessary. New advances in molecular pathogenesis of this disease led researchers to develop a diagnostic test based on Western blot for FANCD2. The objective of the present study was to determine the efficacy of this method for the diagnosis of 84 Brazilian patients with Fanconi anemia, all of whom tested positive for the diepoxybutane test, and 98 healthy controls. The FANCD2 monoubiquitinated isoform (FANCDS+/FANCD2L-) was not detected in 77 patients (91.7%). In 2 patients (2.4%), there was an absence of both the monoubiquitinated and the non-ubiquitinated proteins (FANCD2S-/FANCD2L-) and 5 patients (5.9%) had both isoforms (FANCD2S+/FANCD2L+). This last phenotype suggests downstream subtypes or mosaicism. All controls were diepoxybutane negative and were also negative on the FANCD2 Western blot. The Western blot for FANCD2 presented a sensitivity of 94% (79/84) and specificity of 100% (98/98). This method was confirmed as an efficient approach to screen Brazilian patients with deleterious mutations on FANCD2 (FANCD2S-/FANCD2L-) or other upstream genes of the FA/BRCA pathway (FANCDS+/FANCD2L-), to confirm the chromosome breakage test and to classify patients according to the level of FA/BRCA pathway defects. However, patients showing both FANCD2 isoforms (FANCD2S+/FANCD2L+) require additional studies to confirm mutations on downstream Fanconi anemia genes or the presence of mosaicism.

Water extracts of cabbage and kale inhibit ex vivo H2O2-induced DNA damage but not rat hepatocarcinogenesis

The chemopreventive potential of water extracts of the Brassica vegetables cabbage and kale was evaluated by administering their aqueous extracts in drinking water ad libitum to Wistar rats submitted to Ito’s hepatocarcinogenesis model (CB group and K group, respectively - 14 rats per group). Animals submitted to this same model and treated with water were used as controls (W group - 15 rats). Treatment with the vegetable extracts did not inhibit (P > 0.05) placental glutathione S-transferase-positive preneoplastic lesions (PNL). The number of apoptotic bodies did not differ (P > 0.05) among the experimental groups. Ex vivo hydrogen peroxide treatment of rat livers resulted in lower (P < 0.05) DNA strand breakage in cabbage- (107.6 ± 7.8 µm) and kale- (110.8 ± 10.0 µm) treated animals compared with control (120.9 ± 12.7 µm), as evaluated by the single cell gel (comet) assay. Treatment with cabbage (2 ± 0.3 µg/g) or kale (4 ± 0.2 µg/g) resulted in increased (P < 0.05) hepatic lutein concentration compared with control (0.5 ± 0.07 µg/g). Despite the absence of inhibitory effects of cabbage and kale aqueous extracts on PNL, these Brassica vegetables presented protection against DNA damage, an effect possibly related to increased hepatic lutein concentrations. However, it must be pointed out that the cause-effect relationship between lutein levels and protection is hypothetical and remains to be demonstrated.

Micronucleated lymphocytes in parents of Down syndrome children

Down syndrome (DS) is the most common disease due to an autosomal aneuploidy in live born children and also the major known genetic cause of mental retardation. The risk of a DS pregnancy increases substantially with increasing maternal age. However, several women aged less than 35 years at conception have a child with DS. The micronucleus (MN) assay can identify chromosome breakage or chromosome malsegregation and is an ideal biomarker to investigate genomic instability. The aim of the present study was to determine the frequency of peripheral lymphocytes with MN in the parents of DS individuals. The subjects were 17 couples, 1 father and 9 mothers, and 24 couples who had at least one healthy child formed the control group. For each individual we evaluated the frequency of binucleated micronucleated lymphocytes (BNMN%) as number of binucleated lymphocytes containing one or more MN per 1000 binucleated cells. The mean age of DS parents and controls was 32.6 and 29.8 years, respectively. The frequency of MN in DS parents was significantly higher compared to controls. The higher frequency of MN in DS parents suggests a higher predisposition of DS parents to aneuploidy events in this sample.

Pyörivien sähkökäyttöjen ennakoiva kunnossapito reaaliaikaisen värähtelymittauksen avulla

Teollisuuden pyörivien sähkökäyttöjen ennakoivaan kunnossapitoon investoidaan jatkuvasti enemmän ja enemmän, jotta käytönaikaisia sähkökäyttöjen rikkoontumisia saataisiin ehkäistyksi. Lisäksi huoltojen ajoittamista halutaan optimoida siten, että suunniteltujen tuotantoseisokkien aikana saataisiin tehdyksi oleelliset ja tarpeelliset huoltotoimenpiteet. Pyörivien sähkökäyttöjen kunnonvalvontamenetelmiä ja -tapoja on erilaisia ja yhtenä vaihtoehtona voisi olla reaaliaikainen värähtelymittaus. Tässä diplomityössä tarkastellaan kunnossapidon käsitteitä, värähtelymittaukseen liittyviä suureita ja menetelmiä, sekä reaaliaikaisen värähtelymittauksen hyödyntämistä teollisuudessa.

The impact of wine closure and packaging type, and light and temperature exposure on the concentration of 3-alkyl-2 -methoxypyrazines and other key constituents of wine

3-alkyl-2-methoxypyrazines (MPs) are grape- and insect-derived odor-active compounds responsible for vegetative percepts that are detrimental to wine quality when elevated. This study tested both the effect of closure/packaging types and light/temperature storage conditions on MPs (isopropyl-, secbutyl-, and isobutyl-MP) in wine. An MP-emiched wine rapidly (after 140 hours) and significantly decreased in MP concentration after natural and synthetic cork contact (immersion of closures in wine). This decrease was greatest with synthetic closures (70% - 89% reduction) and secbutyl-MP. Subsequently storage trials tested the effects of commercial closure/packaging options (natural cork, agglomerate cork, synthetic corks, screwcaps and TetraPak® cartons) on MPs in MP-emiched Riesling and Cabernet Franc over 18 months. Regardless of packaging, isobutyl-MP was the most altered from bottling. Notably, all MP levels tended to decrease to the greatest extent in TetraPak® cartons (~34% for all MPs) and there was evidence of contribution ofisoproyl- and secbutyl-MP from cork-based closures (i.e. ~30% increase in secbutyl-MP after 6 months) or from an unidentified wine constituent. To test the effects of various light/temperature conditions (light exposed at ambient temperature in three different bottle hues, light excluded at ambient temperature and light excluded at a "cellar" temperature (14°C)), MP-emiched Riesling and Cabernet Franc were also analyzed for MP concentrations over 12 months. MPs did not vary consistently with light or temperature. Other odorants and physico-chemical properties were tested in all wines during storage trials and closely agree with previous literature. These results provide novel insights into MPs during ageing, interactions with packaging and storage conditions, and assist in the selection of storage conditions/packaging for optimal wine quality.