Integrated engineering workstations in electrical engineering laboratories

This paper provides a description of integrated engineering workstations (IEW’s) used in undergraduate electrical engineering laboratories. The IEW’s are used for the design, analysis, and testing of engineering systems. Examples of laboratory experiments and software programs are presented.

Design of removable partial dentures: a survey of dental laboratories in Greece

The aim of this study was to compare data on design and fabrication methods of removable partial dentures (RPDs) in two major cities in Greece. A questionnaire was sent to 150 randomly selected dental technicians. The participation rate was 79.3%. The anterior palatal strap, the lingual bar, and the Roach-type clasp arm designs were preferred. Half of the RPDs fabricated were retained using precision attachments. Differences between the two cities were observed in types of major maxillary connectors used, types of attachments and impression materials used, as well as the design of distal-extension RPDs. Postdoctoral education was found to have an impact on RPD fabrication. Despite the differences observed, design and fabrication of RPDs followed commonly used principles.

Transferability of geoscientific information from various sources (study sites, underground rock laboratories, natural analogues) to support safety cases for radioactive waste repositories in argillaceous formations

In studies related to deep geological disposal of radioactive waste, it is current practice to transfer external information (e.g. from other sites, from underground rock laboratories or from natural analogues) to safety cases for specific projects. Transferable information most commonly includes parameters, investigation techniques, process understanding, conceptual models and high-level conclusions on system behaviour. Prior to transfer, the basis of transferability needs to be established. In argillaceous rocks, the most relevant common feature is the microstructure of the rocks, essentially determined by the properties of clay–minerals. Examples are shown from the Swiss and French programmes how transfer of information was handled and justified. These examples illustrate how transferability depends on the stage of development of a repository safety case and highlight the need for adequate system understanding at all sites involved to support the transfer.

Variability between laboratories performing coagulation tests with identical platforms: a nationwide evaluation study.

BACKGROUND While the assessment of analytical precision within medical laboratories has received much attention in scientific enquiry, the degree of as well as the sources causing variation between them remains incompletely understood. In this study, we quantified the variance components when performing coagulation tests with identical analytical platforms in different laboratories and computed intraclass correlations coefficients (ICC) for each coagulation test. METHODS Data from eight laboratories measuring fibrinogen twice in twenty healthy subjects with one out of 3 different platforms and single measurements of prothrombin time (PT), and coagulation factors II, V, VII, VIII, IX, X, XI and XIII were analysed. By platform, the variance components of (i) the subjects, (ii) the laboratory and the technician and (iii) the total variance were obtained for fibrinogen as well as (i) and (iii) for the remaining factors using ANOVA. RESULTS The variability for fibrinogen measurements within a laboratory ranged from 0.02 to 0.04, the variability between laboratories ranged from 0.006 to 0.097. The ICC for fibrinogen ranged from 0.37 to 0.66 and from 0.19 to 0.80 for PT between the platforms. For the remaining factors the ICC's ranged from 0.04 (FII) to 0.93 (FVIII). CONCLUSIONS Variance components that could be attributed to technicians or laboratory procedures were substantial, led to disappointingly low intraclass correlation coefficients for several factors and were pronounced for some of the platforms. Our findings call for sustained efforts to raise the level of standardization of structures and procedures involved in the quantification of coagulation factors.

The use of special stains at two dermatopathology laboratories in East Africa.

BACKGROUND Histopathology is often essential to establish an accurate diagnosis. Pathology laboratories are scarce in most Sub-Saharan Africa where dermatopathology is a developing field. In resource-poor countries, most specimens are analyzed only after hematoxylin and eosin staining. The availability of special stains is very limited and restricted to only few centers. The aim of this study is to analyze the extent of dermatopathological cases which can be adequately diagnosed after hematoxylin and eosin alone. Secondly, to investigate which cases required further special stains. METHODS All skin specimens submitted to two University Hospitals (Tanzania and Kenya) were included in this study. All specimens were first analyzed with hematoxylin and eosin and a diagnosis established when possible. All cases in which an accurate diagnosis after hematoxylin and eosin only was not possible, were registered and evaluated after further special stains. RESULTS A total of 386 specimens were examined. A proper histopathologic diagnosis with hematoxylin and eosin alone was possible in 344 (89.1%) samples. In 45 (11.6%) cases, mostly skin infections, further special stains were necessary. CONCLUSION A proper histopathologic diagnosis was possible after hematoxylin and eosin alone in almost 90% of the specimens submitted to the two laboratories in Sub-Saharan Africa.

Role of laboratories for adapting product-related environmental regulations (PRERs)

This paper examines how a country which has been successful in creating agglomeration of a manufacturing industry has faced various types of product-related environmental regulations. Then the paper shows how the government and testing laboratory have taken measures to adapt to PRERs overseas in response to the needs by firms affected by regulations. In reaction to the introductions of PRERs overseas, Malaysia also has introduced equivalent policies domestically, proving that PRERs have spread to Malaysia.

Role of laboratories for adapting product-related environmental regulations (PRERs)

This paper examines how a country which has been successful in creating agglomeration of a manufacturing industry has faced various types of product-related environmental regulations. Then the paper shows how the government and testing laboratory have taken measures to adapt to PRERs overseas in response to the needs by firms affected by regulations. In reaction to the introductions of PRERs overseas, Malaysia also has introduced equivalent policies domestically, proving that PRERs have spread to Malaysia.

Role of laboratories for adapting product-related environmental regulations (PRERs)

This paper examines how a country which has been successful in creating agglomeration of a manufacturing industry has faced various types of product-related environmental regulations. Then the paper shows how the government and testing laboratory have taken measures to adapt to PRERs overseas in response to the needs by firms affected by regulations. In reaction to the introductions of PRERs overseas, Malaysia also has introduced equivalent policies domestically, proving that PRERs have spread to Malaysia.

Role of laboratories for adapting product-related environmental regulations (PRERs)

This paper examines how a country which has been successful in creating agglomeration of a manufacturing industry has faced various types of product-related environmental regulations. Then the paper shows how the government and testing laboratory have taken measures to adapt to PRERs overseas in response to the needs by firms affected by regulations. In reaction to the introductions of PRERs overseas, Malaysia also has introduced equivalent policies domestically, proving that PRERs have spread to Malaysia.

Role of laboratories for adapting product-related environmental regulations (PRERs)

This paper examines how a country which has been successful in creating agglomeration of a manufacturing industry has faced various types of product-related environmental regulations. Then the paper shows how the government and testing laboratory have taken measures to adapt to PRERs overseas in response to the needs by firms affected by regulations. In reaction to the introductions of PRERs overseas, Malaysia also has introduced equivalent policies domestically, proving that PRERs have spread to Malaysia.

Influence of the Lubrication Conditions on the Surface Finish of Turned Aeronautical Aluminium Alloys. A preliminary Study

Nowadays, one of the main objectives that affects the development of any new product is the respect for the environment. Until the late 80's, the development and manufacture of the most of the product were aimed to achieve maximum quality in time and costs with environmental issues relegated to secondary importance. On the other hand, in the 90's, the pressure from factors such as markets, financial and legislative factors, led to environmental considerations being taken into account. In this context, the current aeronautical industry strategies are based on the search for economic, environmental and energy efficiency considerations for all the processes involved in the aircraft manufacturing.

Considerations on the success rate in aeronautical engineering studies in Spain

The relationship between different learning evaluation methods and the academic success in an aeronautical engineering degree in Spain is analysed. The study is based on data about the evolution of academic achievement obtained along the last ten year, along which the evaluation and learning’s methods have suffered huge changes.