Microstructural evidence for the mechanism of the alpha-beta phase transformation in ytterbium SiAlON ceramics

Detailed microstructural evidence for the mechanism of the alpha-beta phase transformation in ytterbium SiAlON ceramics is presented. Grains, which show partial transformation, have been examined using transmission electron microscopy. We suggest that the transformation proceeds as a discernable reaction front and the accompanying lattice mismatch is accommodated be a series of complex dislocations. The stabilizing cation is ejected from the transformed alpha- phase and diffuse along the dislocation to accumulate as isolated pockets in a way similar to that observed in metal systems and termed pipe diffusion. High-resolution electron microscopy reveals the details of each of these features.

Microstructure, mechanical properties and chemical degradation of brazed AISI 316 stainless steel/alumina systems

The main aims of the present study are simultaneously to relate the brazing parameters with: (i) the correspondent interfacial microstructure, (ii) the resultant mechanical properties and (iii) the electrochemical degradation behaviour of AISI 316 stainless steel/alumina brazed joints. Filler metals on such as Ag–26.5Cu–3Ti and Ag–34.5Cu–1.5Ti were used to produce the joints. Three different brazing temperatures (850, 900 and 950 °C), keeping a constant holding time of 20 min, were tested. The objective was to understand the influence of the brazing temperature on the final microstructure and properties of the joints. The mechanical properties of the metal/ceramic (M/C) joints were assessed from bond strength tests carried out using a shear solicitation loading scheme. The fracture surfaces were studied both morphologically and structurally using scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and X-ray diffraction analysis (XRD). The degradation behaviour of the M/C joints was assessed by means of electrochemical techniques. It was found that using a Ag–26.5Cu–3Ti brazing alloy and a brazing temperature of 850 °C, produces the best results in terms of bond strength, 234 ± 18 MPa. The mechanical properties obtained could be explained on the basis of the different compounds identified on the fracture surfaces by XRD. On the other hand, the use of the Ag–34.5Cu–1.5Ti brazing alloy and a brazing temperature of 850 °C produces the best results in terms of corrosion rates (lower corrosion current density), 0.76 ± 0.21 μA cm−2. Nevertheless, the joints produced at 850 °C using a Ag–26.5Cu–3Ti brazing alloy present the best compromise between mechanical properties and degradation behaviour, 234 ± 18 MPa and 1.26 ± 0.58 μA cm−2, respectively. The role of Ti diffusion is fundamental in terms of the final value achieved for the M/C bond strength. On the contrary, the Ag and Cu distribution along the brazed interface seem to play the most relevant role in the metal/ceramic joints electrochemical performance.

Alumina recoberta por carbono como suporte de catalisadores de hidrodessulfurização

O presente trabalho consistiu no estudo do uso do etilenoglicol como fonte de carbono visando o recobrimento de uma alumina comercial, produzindo uma alumina recoberta por carbono (ARC). Os materiais preparados foram utilizados como suporte de molibdénio e usados na reação modelo de HDS do tiofeno. De modo a avaliar a influência da fonte de carbono na atividade e seletividade dos catalisadores preparados, foi estudada a variação da temperatura de carbonização e a variação do número de monocamadas teóricas de carbono impregnadas na superfície da γ-alumina. Os diferentes suportes e catalisadores sintetizados foram caraterizados por análise da cor, difração de raios X (DRX), fisissorção de N2, espetroscopia Raman, espetroscopia de refletância difusa na região do IV com transformada de Fourier (DRIFTS), Dessorção a temperatura programada (TPHe) e avaliação catalítica. Os resultados mostraram que com uma monocamada teórica, e para temperaturas inferiores a 700 ºC, a carbonização da fonte de carbono foi incompleta e que apenas para a temperatura de 700 ºC se originou carbono amorfo. Porém, verificou-se ainda que uma monocamada teórica de carbono não foi suficiente para recobrir a superfície da alumina, o que originou a necessidade de estudar a variação do número de monocamadas teóricas. A variação do número de monocamadas teóricas de carbono permitiu concluir que com um número inferior a 3 monocamadas teóricas não se verificou qualquer alteração nas propriedades da alumina. A impregnação de 3, 4, ou 5 monocamadas teóricas foi suficiente apenas para diminuir a área específica, porém não foi possível recobrir totalmente a superfície do suporte. Estes resultados indicam que o motivo pelo qual não foi possível recobrir a superfície do suporte se deve provavelmente à natureza da fonte de carbono utilizado, o etilenoglicol.

Caracterização da fase activa de catalisadores de Níquel suportados em α-Alumina, utilizando as reacções de desidrogenação e Hidrogenólise do Ciclohexano

A constante melhoria da eficiência energética dos processos industriais actuais é crucial para o contínuo desenvolvimento sustentável da espécie humana. O estudo das reacções de desidrogenação e hidrogenólise do ciclohexano, sobre catalisadores suportados, pode contribuir para um melhor entendimento acerca dos processos de formação e armazenamento de H2, uma das mais promissoras fontes de energia do futuro próximo, assim como para processos actuais tão importantes como a refinação ou o reforming catalítico do petróleo. Escolheu-se estudar as referidas reacções sobre catalisadores de Ni/α-Al2O3, preparados por três métodos distintos e submetidos a diferentes pré-tratamentos, de modo a realçar a dependência das reacções no que se refere às propriedades catalíticas. A maioria dos estudos anteriores sobre estas mesmas reacções recai sobre catalisadores com metais nobres, como a platina ou o paládio, bastante mais dispendiosos que o níquel para aplicações em larga escala. Os precursores e catalisadores previamente preparados foram submetidos à caracterização por diferentes técnicas: Termogravimetria (sob fluxo oxidativo e não oxidativo), Difracção de Raios-X e Quimissorção de H2. O estudo das reacções de desidrogenação e hidrogenólise do ciclohexano realizou-se recorrendo à análise por Cromatografia Gasosa, utilizando dois cromatógrafos distintos (HEWLETT PACKARD 5890 SERIES II, para GC, e 490 Micro GC Agilent, para Micro GC). Pôde concluir-se que o método de preparação dos catalisadores influenciou a actividade para ambas as reacções, assim como os diferentes pré-tratamentos aplicados. No geral, e na gama de temperaturas estudadas (entre 250 e 310º C), os catalisadores preparados pelo método com etilenodiamina evidenciaram maior actividade para a reacção de desidrogenação, sendo que os catalisadores preparados pelo método com etilenoglicol foram os mais activos para a reacção de hidrogenólise.

Ferroelectric phase transitions studies in 0.5Ba(Zr0.2Ti0.8) O3-0.5(Ba0.7Ca0.3)TiO3 ceramics

The ferroelectric phase transitions in 0.5Ba(Zr0.2Ti0.8)O3-0.5(Ba0.7Ca0.3)TiO3 (BCZT 50/50) ceramics,fabricatedbyasolidstatereaction,werestudiedbyusing X-Ray diffraction, Raman spectroscopy, and measuring electric polarization, dielectric permittivity and pyroelectric current. Xraydiffraction(XRD)confirmsthecoexistenceoftetragonal(T) andrhombohedral(R)phasesatroomtemperature.Thetemperature dependence of the Raman modes frequency reveals the existenceoftwophasetransitionscorrespondingtotherhombohedral – tetragonal, and tetragonal - cubic close to 30 and 100 °C, respectively. The temperature dependence of electric polarization,pyroelectriccurrent,anddielectricpermittivityfurther supports theferroelectric (tetragonal) toparaelectric (cubic) phasetransition.Moreover,thedielectricpermittivityrevealsthe diffuseness of the phase transition and is attributed to the compositional fluctuations of different polar micro-regions.

Bioactive ceramics for tissue engineering and regenerative medicine derived from marine sponges

Publicado em "Journal of tissue engineering and regenerative medicine". Vol. 8, suppl. s1 (2014)

Development of a rehabilitation system for the red mud waste generated at the Aughinish Alumina Bayer Plant

Aughinish Alumina Limited (AAL) have an obligation by terms of their Integrated Pollution Control Licence (IPCL) and Planning Permission to establish vegetation on the red mud stack at their plant at Aughinish, Co. Limerick. High pH and high exchangeable sodium percentage are the main known factors limiting the establishment of vegetation on red mud. Gypsum addition has been known to assist in alleviating these problems in other countries. However, there is no experience or published information on red mud rehabilitation under Irish conditions. Red mud with organic and inorganic waste-derived ameliorants as well as selected grassland species were examined under laboratory controlled environment conditions as well as in field plot trials. Also, in order that it would be economically achievable, the research utilised locally available waste products as the organic amendments. Screening trials found that physical constraints severely limit plant germination and growth in red mud. Gypsum addition effectively lowers pH, exchangeable sodium percentage and the availability of A1 and Fe in the mud. A strong relationship between pH, ESP and A1 levels was also found. Gypsum addition increased germination percentages and plant growth for all species investigated. Greenhouse trials demonstrated that organic wastes alone did not greatly improve conditions for plant growth but when used in conjunction with gypsum plant performances for all species investigated was significantly increased. There was a high mortality rate for grasses in non-gypsum treatments. An emerging trend of preferential iron uptake and calcium deficiency in non-gypsum treatments was found at pot screening stage. Species also displayed manganese and magnesium deficiencies.

Mathematical model to analyze the heat transfer in tunnel kilns for burning of ceramics

Magdeburg, Univ., Fak. für Verfahrens- und Systemtechnik, Diss., 2013

The early ceramics of the Inca heartland / Brian S. Bauer.

n.s. no.31(1999)

Screen printed La2/3Sr1/3MnO3 thick films on alumina substrates

We report here on the preparation of La2/3Sr1/3MnO3 magnetoresistive thick films on polycrystalline Al2O3 substrates by using the screen printing technique. It is shown that films can be obtained using high temperature sintering. While there is a reacted layer, this improves adhesion and is not too troublesome if the films are made thick enough. It is shown that PbO-B2O3-SiO2 glass additives allow sintering at lower temperatures and can be used to improve the mechanical stress of the films. However, it is found that glass concentrations large enough to significantly improve the film adherence result in a weak low field magnetoresistance probably because grains are coated with high resistivity material. Strategies to overcome these difficulties are discussed.

Surface functionalization of alumina ceramic foams with organic ligands.

Different anchoring groups have been studied with the aim of covalently binding organic linkers to the surface of alumina ceramic foams. The results suggested that a higher degree of functionalization was achieved with a pyrogallol derivative - as compared to its catechol analogue - based on the XPS analysis of the ceramic surface. The conjugation of organic ligands to the surface of these alumina materials was corroborated by DNP-MAS NMR measurements.

Alteration and Contamination of Archaeological Ceramics: the Perturbation Problem

Alteration and contamination processes modify the chemical composition of ceramic artefacts. This is not restricted solely to the affected elements, but also affects general concentrations. This is due to the compositional nature of chemical data, enclosed by the restriction of unit sum. Since it is impossible to know prior to data treatment whether the original compositions have been changed by such processes, the methodological approach used in provenance studies must be robust enough to handle materials that might have been altered or contaminated. The ability of the logratio transformation proposed by Aitchison to handle compositional data is studied and compared with that of present data treatments. The logaratio transformation appears to offer the most robust approach

Implications of burial alterations on luminescence dating of archaeological ceramics

Recent mineralogical studies on archaeological pottery samples report significant variations in alkali metal concentrations due to environmental alterations during burial. Here we examine the effects of potassium (K) leaching on luminescence dating. The effect on the estimation of the dose rate is studied by considering four models of leaching (exponential, linear, early and late) and their impact on fine- and coarse-grain dating are calculated. The modeling approaches are applied to two cases of pottery in which evidence for alteration was found. Additionally, TL dating performed on pottery of one of the studied cases, indicates the importance of leaching effects on absolute dating measurements.