995 resultados para 737
Resumo:
Micro-electro-mechanical systems, MEMS, is a rapidly growing interdisciplinary technology within the general field of Micro-Systems Technology which deals with the design and manufacture of miniaturised machines with major dimensions at the scale of tens, to perhaps hundreds, of microns. Because they depend on the cube of a representative dimension, component masses and inertias rapidly become small as size decreases whereas surface and tribological effects, which often depend on area, become increasingly important. Although MEMS components and their areas of contact are small, tribological conditions, measured by contact pressures or acceptable wear rates, are demanding and technical and commercial success will require careful measurement and precise control of surface topography and properties. Fabrication of small numbers of MEMS devices designed to test potential material combinations can be prohibitively expensive and thus there is a need for small scale test facilities which mimic the contact conditions within a micro-machine without themselves requiring processing within a full semiconductor foundry. The talk will illustrate some initial experimental results from a small-scale experimental device which meets these requirements, examining in particular the performance of Diamond-Like-Carbon coatings on a silicon substrate. Copyright © 2005 by ASME.
Resumo:
对6个牛微卫星座位的遗传变异及多态性分析,以期了解BMY牛和婆罗门牛的群体遗传结构与育成情况.6个微卫星座位的多态信息含量为在0.524~0.752间,BMY牛、婆罗门牛两个群体的平均期望杂合度和观察杂合度值接近,分别为0.737 6和0.739 6,0 641 2和0.653 7,进入横交固定第二世代的BMY牛期望杂合度值较高,这与我们的育种进展相符.红安格斯的期望杂合度较低(0.460 9)接近日本和牛0.471,暗示红安格斯牛的同质性较高.
Resumo:
Three new dibenzocyclooctadiene lignans, schilancifolignans A-C (1-3), together with thirteen known ones, were isolated from the leaves and stems of Schisandru lancifolia. The structures of 1-3 were elucidated by spectroscopic methods, including extensive 1D- and 2D-NMR techniques. Compounds 1-3 were tested for their anti-human immunodeficiency virus-1 activities and showed weak bioactivities.
Resumo:
Recent development of solution processable organic semiconductors delineates the emergence of a new generation of air-stable, high performance p- and n-type materials. This makes it indeed possible for printed organic complementary circuits (CMOS) to be used in real applications. The main technical bottleneck for organic CMOS to be adopted as the next generation organic integrated circuit is how to deposit and pattern both p- and n-type semiconductor materials with high resolutions at the same time. It represents a significant technical challenge, especially if it can be done for multiple layers without mask alignment. In this paper, we propose a one-step self-aligned fabrication process which allows the deposition and high resolution patterning of functional layers for both p- and n-channel thin film transistors (TFTs) simultaneously. All the dimensional information of the device components is featured on a single imprinting stamp, and the TFT-channel geometry, electrodes with different work functions, p- and n-type semiconductors and effective gate dimensions can all be accurately defined by one-step imprinting and the subsequent pattern transfer process. As an example, we have demonstrated an organic complementary inverter fabricated by 3D imprinting in combination with inkjet printing and the measured electrical characteristics have validated the feasibility of the novel technique. © 2012 Elsevier B.V. All rights reserved.
Resumo:
Infrastructure spatial data, such as the orientation and the location of in place structures and these structures' boundaries and areas, play a very important role for many civil infrastructure development and rehabilitation applications, such as defect detection, site planning, on-site safety assistance and others. In order to acquire these data, a number of modern optical-based spatial data acquisition techniques can be used. These techniques are based on stereo vision, optics, time of flight, etc., and have distinct characteristics, benefits and limitations. The main purpose of this paper is to compare these infrastructure optical-based spatial data acquisition techniques based on civil infrastructure application requirements. In order to achieve this goal, the benefits and limitations of these techniques were identified. Subsequently, these techniques were compared according to applications' requirements, such as spatial accuracy, the automation of acquisition, the portability of devices and others. With the help of this comparison, unique characteristics of these techniques were identified so that practitioners will be able to select an appropriate technique for their own applications.
Resumo:
首次报道了亚东鲑在青藏高原河流中的生长特点。对1999—2002年间在亚东河共采集的462尾亚东鲑(体长范围为93—364mm)进行了年龄与生长的研究。通过鳞片对其中302尾进行年龄鉴定并建立Von Bertalanffy生长方程:雌性(♀)Lt=709.44[1-e-0.1656(t-0.0845)](R2=0.9993,n=132)和Wt=6017.46[1-e-0.1656(t-0.0845)]2.9724(R2=0.9845,n=132);雄性(♂)Lt=797.82[1-e-0.1428(t-0
Resumo:
通过磷脂脂肪酸(PLFAs)分析,研究了复合垂直流人工湿地基质剖面的微生物群落结构及其分布特征.结果表明,湿地PLFAs组成以饱和脂肪酸、支链脂肪酸和单不饱和脂肪酸为主,多不饱和脂肪酸与环丙烷脂肪酸含量较少.特征脂肪酸的比值呈垂直分布.基质中好氧原核微生物为优势类群,其次为革兰氏阳性细菌及其他厌氧细菌,真核微生物所占比例最低.统计结果显示,好氧原核微生物的特征PLFAs相对含量在上行池表层最高;革兰氏阳性细菌、SRB及其他厌氧细菌的特征PLFAs相对含量在下行池中层显著高于其他位点,指示该区域为湿地系统主
Resumo:
本研究采用流式细胞术,以公鸡(Gallusdomesticus)红血细胞DNA含量为标准,测定了23头长江江豚(Neophocaenaphocaenoidesasiaeorientali)的基因组大小(或称C值)。实验过程中采用了保存在3中不同条件下的长江江豚的全血样品,用3种不同的方法提取白细胞。为了获得本实验所用的公鸡红血细胞DNA含量的准确值,首先以人(Homosapiens)的C值为标准,对其进行了校正。然后其C值(2C=2.35pg)用于长江江豚的基因组大小测定。结果发现:长江江豚的单倍体DNA
Resumo:
Liquefaction-induced lateral spreading has been responsible for widespread damage to pile foundations in many large earthquakes. The specification of inertial and kinematic pile and pile cap demands is a particularly challenging aspect of the analysis of pile foundations in laterally spreading soils. This paper presents and examines the results from a pair of dynamic centrifuge tests focusing on pile and pile cap demands for small pile groups with different pile spacings. Inertial and kinematic pile cap forces and lateral pile group interaction are examined with regard to the overturning mechanism that dominated the pile group response. © 2014 Taylor & Francis Group.
Resumo:
A L9 orthogonal array design involving 3 factors (C6H12O6, KNO3 and NaH2PO4) and 3 levels for each (C6H12O6: 0.2, 0.4 or 0.8 g/L; KNO3: 0.4, 0.8 or 1.6 g/L, NaH2PO4: 0.05, 0.1 or 0.2 g/L), was used to study the effects of nutrients on dehydrogenase activity and polysaccharide content of substrate biofilms in the integrated vertical-flow constructed wetland (IVCW). Results showed that C6H12O6 and KNO3 were the main factors for dehydrogenase activity and polysaccharide content of biofilms, respectively. The combinations of three nutrients at different concentrations had different effects on dehydrogenase activity and polysaccharide content of biofilms. The optimal combination for dehydrogenase activity was obtained by locating the concentrations Of C6H12O6, KNO3 and NaH2PO4 at 0.2, 0.8 and 0.05 g, and the optimal combination for polysaccharide content was obtained by locating the concentrations Of C6H12O6, KNO3 and NaH2PO4 at 0.2, 0.4 and 0.2 g/L, respectively. The corresponding maximum activity and polysaccharide content were 5.40 mu g TF/g substrate/12 h and 3454.6 mu g/g substrate, respectively. These results would provide the laboratory foundation for optimizing the purification function of the wetland systems.
Resumo:
With a series of supportive experimental phenomena as induced by ion beam bombardment, energetic beaminduced athermal activation process in Si is demonstrated. This is correlated with phenomena induced by ultrafast energy exchange in condensed matter in general. A critical modelling is presented on the above process and a universal concept: the ultrafast energy exchange-induced soft mode of phonons and the lattice instability in condensed matter are proposed.