837 resultados para 3D multi-user virtual environments


Relevância:

100.00% 100.00%

Publicador:

Resumo:

Natural hazard related to the volcanic activity represents a potential risk factor, particularly in the vicinity of human settlements. Besides to the risk related to the explosive and effusive activity, the instability of volcanic edifices may develop into large landslides often catastrophically destructive, as shown by the collapse of the northern flank of Mount St. Helens in 1980. A combined approach was applied to analyse slope failures that occurred at Stromboli volcano. SdF slope stability was evaluated by using high-resolution multi-temporal DTMMs and performing limit equilibrium stability analyses. High-resolution topographical data collected with remote sensing techniques and three-dimensional slope stability analysis play a key role in understanding instability mechanism and the related risks. Analyses carried out on the 2002–2003 and 2007 Stromboli eruptions, starting from high-resolution data acquired through airborne remote sensing surveys, permitted the estimation of the lava volumes emplaced on the SdF slope and contributed to the investigation of the link between magma emission and slope instabilities. Limit Equilibrium analyses were performed on the 2001 and 2007 3D models, in order to simulate the slope behavior before 2002-2003 landslide event and after the 2007 eruption. Stability analyses were conducted to understand the mechanisms that controlled the slope deformations which occurred shortly after the 2007 eruption onset, involving the upper part of slope. Limit equilibrium analyses applied to both cases yielded results which are congruent with observations and monitoring data. The results presented in this work undoubtedly indicate that hazard assessment for the island of Stromboli should take into account the fact that a new magma intrusion could lead to further destabilisation of the slope, which may be more significant than the one recently observed because it will affect an already disarranged deposit and fractured and loosened crater area. The two-pronged approach based on the analysis of 3D multi-temporal mapping datasets and on the application of LE methods contributed to better understanding volcano flank behaviour and to be prepared to undertake actions aimed at risk mitigation.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

For enhanced immersion into a virtual scene more than just the visual sense should be addressed by a Virtual Reality system. Additional auditory stimulation appears to have much potential, as it realizes a multisensory system. This is especially useful when the user does not have to wear any additional hardware, e.g., headphones. Creating a virtual sound scene with spatially distributed sources requires a technique for adding spatial cues to audio signals and an appropriate reproduction. In this paper we present a real-time audio rendering system that combines dynamic crosstalk cancellation and multi-track binaural synthesis for virtual acoustical imaging. This provides the possibility of simulating spatially distributed sources and, in addition to that, near-to-head sources for a freely moving listener in room-mounted virtual environments without using any headphones. A special focus will be put on near-to-head acoustics, and requirements in respect of the head-related transfer function databases are discussed.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Recently, stable markerless 6 DOF video based handtracking devices became available. These devices simultaneously track the positions and orientations of both user hands in different postures with at least 25 frames per second. Such hand-tracking allows for using the human hands as natural input devices. However, the absence of physical buttons for performing click actions and state changes poses severe challenges in designing an efficient and easy to use 3D interface on top of such a device. In particular, for coupling and decoupling a virtual object’s movements to the user’s hand (i.e. grabbing and releasing) a solution has to be found. In this paper, we introduce a novel technique for efficient two-handed grabbing and releasing objects and intuitively manipulating them in the virtual space. This technique is integrated in a novel 3D interface for virtual manipulations. A user experiment shows the superior applicability of this new technique. Last but not least, we describe how this technique can be exploited in practice to improve interaction by integrating it with RTT DeltaGen, a professional CAD/CAS visualization and editing tool.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Virtual environments (VE) are gaining in popularity and are increasingly used for teamwork training purposes, e.g., for medical teams. One shortcoming of modern VEs is that nonverbal communication channels, essential for teamwork, are not supported well. We address this issue by using an inexpensive webcam to track the user's head. This tracking information is used to control the head movement of the user's avatar, thereby conveying head gestures and adding a nonverbal communication channel. We conducted a user study investigating the influence of head tracking based avatar control on the perceived realism of the VE and on the performance of a surgical teamwork training scenario. Our results show that head tracking positively influences the perceived realism of the VE and the communication, but has no major influence on the training outcome.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

While navigation systems for cars are in widespread use, only recently, indoor navigation systems based on smartphone apps became technically feasible. Hence tools in order to plan and evaluate particular designs of information provision are needed. Since tests in real infrastructures are costly and environmental conditions cannot be held constant, one must resort to virtual infrastructures. This paper presents the development of an environment for the support of the design of indoor navigation systems whose center piece consists in a hands-free navigation method using the Microsoft Kinect in the four-sided Definitely Affordable Virtual Environment (DAVE). Navigation controls using the user's gestures and postures as the input to the controls are designed and implemented. The installation of expensive and bulky hardware like treadmills is avoided while still giving the user a good impression of the distance she has traveled in virtual space. An advantage in comparison to approaches using a head mounted display is that the DAVE allows the users to interact with their smartphone. Thus the effects of different indoor navigation systems can be evaluated already in the planning phase using the resulting system

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Wireless sensor networks (WSNs) have shown their potentials in various applications, which bring a lot of benefits to users from both research and industrial areas. For many setups, it is envisioned thatWSNs will consist of tens to hundreds of nodes that operate on small batteries. However due to the diversity of the deployed environments and resource constraints on radio communication, sensing ability and energy supply, it is a very challenging issue to plan optimized WSN topology and predict its performance before real deployment. During the network planning phase, the connectivity, coverage, cost, network longevity and service quality should all be considered. Therefore it requires designers coping with comprehensive and interdisciplinary knowledge, including networking, radio engineering, embedded system and so on, in order to efficiently construct a reliable WSN for any specific types of environment. Nowadays there is still a lack of the analysis and experiences to guide WSN designers to efficiently construct WSN topology successfully without many trials. Therefore, simulation is a feasible approach to the quantitative analysis of the performance of wireless sensor networks. However the existing planning algorithms and tools, to some extent, have serious limitations to practically design reliable WSN topology: Only a few of them tackle the 3D deployment issue, and an overwhelming number of works are proposed to place devices in 2D scheme. Without considering the full dimension, the impacts of environment to the performance of WSN are not completely studied, thus the values of evaluated metrics such as connectivity and sensing coverage are not sufficiently accurate to make proper decision. Even fewer planning methods model the sensing coverage and radio propagation by considering the realistic scenario where obstacles exist. Radio signals propagate with multi-path phenomenon in the real world, in which direct paths, reflected paths and diffracted paths contribute to the received signal strength. Besides, obstacles between the path of sensor and objects might block the sensing signals, thus create coverage hole in the application. None of the existing planning algorithms model the network longevity and packet delivery capability properly and practically. They often employ unilateral and unrealistic formulations. The optimization targets are often one-sided in the current works. Without comprehensive evaluation on the important metrics, the performance of planned WSNs can not be reliable and entirely optimized. Modeling of environment is usually time consuming and the cost is very high, while none of the current works figure out any method to model the 3D deployment environment efficiently and accurately. Therefore many researchers are trapped by this issue, and their algorithms can only be evaluated in the same scenario, without the possibility to test the robustness and feasibility for implementations in different environments. In this thesis, we propose a novel planning methodology and an intelligent WSN planning tool to assist WSN designers efficiently planning reliable WSNs. First of all, a new method is proposed to efficiently and automatically model the 3D indoor and outdoor environments. To the best of our knowledge, this is the first time that the advantages of image understanding algorithm are applied to automatically reconstruct 3D outdoor and indoor scenarios for signal propagation and network planning purpose. The experimental results indicate that the proposed methodology is able to accurately recognize different objects from the satellite images of the outdoor target regions and from the scanned floor plan of indoor area. Its mechanism offers users a flexibility to reconstruct different types of environment without any human interaction. Thereby it significantly reduces human efforts, cost and time spent on reconstructing a 3D geographic database and allows WSN designers concentrating on the planning issues. Secondly, an efficient ray-tracing engine is developed to accurately and practically model the radio propagation and sensing signal on the constructed 3D map. The engine contributes on efficiency and accuracy to the estimated results. By using image processing concepts, including the kd-tree space division algorithm and modified polar sweep algorithm, the rays are traced efficiently without detecting all the primitives in the scene. The radio propagation model iv is proposed, which emphasizes not only the materials of obstacles but also their locations along the signal path. The sensing signal of sensor nodes, which is sensitive to the obstacles, is benefit from the ray-tracing algorithm via obstacle detection. The performance of this modelling method is robust and accurate compared with conventional methods, and experimental results imply that this methodology is suitable for both outdoor urban scenes and indoor environments. Moreover, it can be applied to either GSM communication or ZigBee protocol by varying frequency parameter of the radio propagation model. Thirdly, WSN planning method is proposed to tackle the above mentioned challenges and efficiently deploy reliable WSNs. More metrics (connectivity, coverage, cost, lifetime, packet latency and packet drop rate) are modeled more practically compared with other works. Especially 3D ray tracing method is used to model the radio link and sensing signal which are sensitive to the obstruction of obstacles; network routing is constructed by using AODV protocol; the network longevity, packet delay and packet drop rate are obtained via simulating practical events in WSNet simulator, which to the best of our knowledge, is the first time that network simulator is involved in a planning algorithm. Moreover, a multi-objective optimization algorithm is developed to cater for the characteristics of WSNs. The capability of providing multiple optimized solutions simultaneously allows users making their own decisions accordingly, and the results are more comprehensively optimized compared with other state-of-the-art algorithms. iMOST is developed by integrating the introduced algorithms, to assist WSN designers efficiently planning reliable WSNs for different configurations. The abbreviated name iMOST stands for an Intelligent Multi-objective Optimization Sensor network planning Tool. iMOST contributes on: (1) Convenient operation with a user-friendly vision system; (2) Efficient and automatic 3D database reconstruction and fast 3D objects design for both indoor and outdoor environments; (3) It provides multiple multi-objective optimized 3D deployment solutions and allows users to configure the network properties, hence it can adapt to various WSN applications; (4) Deployment solutions in the 3D space and the corresponding evaluated performance are visually presented to users; and (5) The Node Placement Module of iMOST is available online as well as the source code of the other two rebuilt heuristics. Therefore WSN designers will be benefit from v this tool on efficiently constructing environment database, practically and efficiently planning reliable WSNs for both outdoor and indoor applications. With the open source codes, they are also able to compare their developed algorithms with ours to contribute to this academic field. Finally, solid real results are obtained for both indoor and outdoor WSN planning. Deployments have been realized for both indoor and outdoor environments based on the provided planning solutions. The measured results coincide well with the estimated results. The proposed planning algorithm is adaptable according to the WSN designer’s desirability and configuration, and it offers flexibility to plan small and large scale, indoor and outdoor 3D deployments. The thesis is organized in 7 chapters. In Chapter 1, WSN applications and motivations of this work are introduced, the state-of-the-art planning algorithms and tools are reviewed, challenges are stated out and the proposed methodology is briefly introduced. In Chapter 2, the proposed 3D environment reconstruction methodology is introduced and its performance is evaluated for both outdoor and indoor environment. The developed ray-tracing engine and proposed radio propagation modelling method are described in details in Chapter 3, their performances are evaluated in terms of computation efficiency and accuracy. Chapter 4 presents the modelling of important metrics of WSNs and the proposed multi-objective optimization planning algorithm, the performance is compared with the other state-of-the-art planning algorithms. The intelligent WSN planning tool iMOST is described in Chapter 5. RealWSN deployments are prosecuted based on the planned solutions for both indoor and outdoor scenarios, important data are measured and results are analysed in Chapter 6. Chapter 7 concludes the thesis and discusses about future works. vi Resumen en Castellano Las redes de sensores inalámbricas (en inglés Wireless Sensor Networks, WSNs) han demostrado su potencial en diversas aplicaciones que aportan una gran cantidad de beneficios para el campo de la investigación y de la industria. Para muchas configuraciones se prevé que las WSNs consistirán en decenas o cientos de nodos que funcionarán con baterías pequeñas. Sin embargo, debido a la diversidad de los ambientes para desplegar las redes y a las limitaciones de recursos en materia de comunicación de radio, capacidad de detección y suministro de energía, la planificación de la topología de la red y la predicción de su rendimiento es un tema muy difícil de tratar antes de la implementación real. Durante la fase de planificación del despliegue de la red se deben considerar aspectos como la conectividad, la cobertura, el coste, la longevidad de la red y la calidad del servicio. Por lo tanto, requiere de diseñadores con un amplio e interdisciplinario nivel de conocimiento que incluye la creación de redes, la ingeniería de radio y los sistemas embebidos entre otros, con el fin de construir de manera eficiente una WSN confiable para cualquier tipo de entorno. Hoy en día todavía hay una falta de análisis y experiencias que orienten a los diseñadores de WSN para construir las topologías WSN de manera eficiente sin realizar muchas pruebas. Por lo tanto, la simulación es un enfoque viable para el análisis cuantitativo del rendimiento de las redes de sensores inalámbricos. Sin embargo, los algoritmos y herramientas de planificación existentes tienen, en cierta medida, serias limitaciones para diseñar en la práctica una topología fiable de WSN: Sólo unos pocos abordan la cuestión del despliegue 3D mientras que existe una gran cantidad de trabajos que colocan los dispositivos en 2D. Si no se analiza la dimensión completa (3D), los efectos del entorno en el desempeño de WSN no se estudian por completo, por lo que los valores de los parámetros evaluados, como la conectividad y la cobertura de detección, no son lo suficientemente precisos para tomar la decisión correcta. Aún en menor medida los métodos de planificación modelan la cobertura de los sensores y la propagación de la señal de radio teniendo en cuenta un escenario realista donde existan obstáculos. Las señales de radio en el mundo real siguen una propagación multicamino, en la que los caminos directos, los caminos reflejados y los caminos difractados contribuyen a la intensidad de la señal recibida. Además, los obstáculos entre el recorrido del sensor y los objetos pueden bloquear las señales de detección y por lo tanto crear áreas sin cobertura en la aplicación. Ninguno de los algoritmos de planificación existentes modelan el tiempo de vida de la red y la capacidad de entrega de paquetes correctamente y prácticamente. A menudo se emplean formulaciones unilaterales y poco realistas. Los objetivos de optimización son a menudo tratados unilateralmente en los trabajos actuales. Sin una evaluación exhaustiva de los parámetros importantes, el rendimiento previsto de las redes inalámbricas de sensores no puede ser fiable y totalmente optimizado. Por lo general, el modelado del entorno conlleva mucho tiempo y tiene un coste muy alto, pero ninguno de los trabajos actuales propone algún método para modelar el entorno de despliegue 3D con eficiencia y precisión. Por lo tanto, muchos investigadores están limitados por este problema y sus algoritmos sólo se pueden evaluar en el mismo escenario, sin la posibilidad de probar la solidez y viabilidad para las implementaciones en diferentes entornos. En esta tesis, se propone una nueva metodología de planificación así como una herramienta inteligente de planificación de redes de sensores inalámbricas para ayudar a los diseñadores a planificar WSNs fiables de una manera eficiente. En primer lugar, se propone un nuevo método para modelar demanera eficiente y automática los ambientes interiores y exteriores en 3D. Según nuestros conocimientos hasta la fecha, esta es la primera vez que las ventajas del algoritmo de _image understanding_se aplican para reconstruir automáticamente los escenarios exteriores e interiores en 3D para analizar la propagación de la señal y viii la planificación de la red. Los resultados experimentales indican que la metodología propuesta es capaz de reconocer con precisión los diferentes objetos presentes en las imágenes satelitales de las regiones objetivo en el exterior y de la planta escaneada en el interior. Su mecanismo ofrece a los usuarios la flexibilidad para reconstruir los diferentes tipos de entornos sin ninguna interacción humana. De este modo se reduce considerablemente el esfuerzo humano, el coste y el tiempo invertido en la reconstrucción de una base de datos geográfica con información 3D, permitiendo así que los diseñadores se concentren en los temas de planificación. En segundo lugar, se ha desarrollado un motor de trazado de rayos (en inglés ray tracing) eficiente para modelar con precisión la propagación de la señal de radio y la señal de los sensores en el mapa 3D construido. El motor contribuye a la eficiencia y la precisión de los resultados estimados. Mediante el uso de los conceptos de procesamiento de imágenes, incluyendo el algoritmo del árbol kd para la división del espacio y el algoritmo _polar sweep_modificado, los rayos se trazan de manera eficiente sin la detección de todas las primitivas en la escena. El modelo de propagación de radio que se propone no sólo considera los materiales de los obstáculos, sino también su ubicación a lo largo de la ruta de señal. La señal de los sensores de los nodos, que es sensible a los obstáculos, se ve beneficiada por la detección de objetos llevada a cabo por el algoritmo de trazado de rayos. El rendimiento de este método de modelado es robusto y preciso en comparación con los métodos convencionales, y los resultados experimentales indican que esta metodología es adecuada tanto para escenas urbanas al aire libre como para ambientes interiores. Por otra parte, se puede aplicar a cualquier comunicación GSM o protocolo ZigBee mediante la variación de la frecuencia del modelo de propagación de radio. En tercer lugar, se propone un método de planificación de WSNs para hacer frente a los desafíos mencionados anteriormente y desplegar redes de sensores fiables de manera eficiente. Se modelan más parámetros (conectividad, cobertura, coste, tiempo de vida, la latencia de paquetes y tasa de caída de paquetes) en comparación con otros trabajos. Especialmente el método de trazado de rayos 3D se utiliza para modelar el enlace de radio y señal de los sensores que son sensibles a la obstrucción de obstáculos; el enrutamiento de la red se construye utilizando el protocolo AODV; la longevidad de la red, retardo de paquetes ix y tasa de abandono de paquetes se obtienen a través de la simulación de eventos prácticos en el simulador WSNet, y según nuestros conocimientos hasta la fecha, es la primera vez que simulador de red está implicado en un algoritmo de planificación. Por otra parte, se ha desarrollado un algoritmo de optimización multi-objetivo para satisfacer las características de las redes inalámbricas de sensores. La capacidad de proporcionar múltiples soluciones optimizadas de forma simultánea permite a los usuarios tomar sus propias decisiones en consecuencia, obteniendo mejores resultados en comparación con otros algoritmos del estado del arte. iMOST se desarrolla mediante la integración de los algoritmos presentados, para ayudar de forma eficiente a los diseñadores en la planificación de WSNs fiables para diferentes configuraciones. El nombre abreviado iMOST (Intelligent Multi-objective Optimization Sensor network planning Tool) representa una herramienta inteligente de planificación de redes de sensores con optimización multi-objetivo. iMOST contribuye en: (1) Operación conveniente con una interfaz de fácil uso, (2) Reconstrucción eficiente y automática de una base de datos con información 3D y diseño rápido de objetos 3D para ambientes interiores y exteriores, (3) Proporciona varias soluciones de despliegue optimizadas para los multi-objetivo en 3D y permite a los usuarios configurar las propiedades de red, por lo que puede adaptarse a diversas aplicaciones de WSN, (4) las soluciones de implementación en el espacio 3D y el correspondiente rendimiento evaluado se presentan visualmente a los usuarios, y (5) El _Node Placement Module_de iMOST está disponible en línea, así como el código fuente de las otras dos heurísticas de planificación. Por lo tanto los diseñadores WSN se beneficiarán de esta herramienta para la construcción eficiente de la base de datos con información del entorno, la planificación práctica y eficiente de WSNs fiables tanto para aplicaciones interiores y exteriores. Con los códigos fuente abiertos, son capaces de comparar sus algoritmos desarrollados con los nuestros para contribuir a este campo académico. Por último, se obtienen resultados reales sólidos tanto para la planificación de WSN en interiores y exteriores. Los despliegues se han realizado tanto para ambientes de interior y como para ambientes de exterior utilizando las soluciones de planificación propuestas. Los resultados medidos coinciden en gran medida con los resultados estimados. El algoritmo de planificación x propuesto se adapta convenientemente al deiseño de redes de sensores inalámbricas, y ofrece flexibilidad para planificar los despliegues 3D a pequeña y gran escala tanto en interiores como en exteriores. La tesis se estructura en 7 capítulos. En el Capítulo 1, se presentan las aplicaciones de WSN y motivaciones de este trabajo, se revisan los algoritmos y herramientas de planificación del estado del arte, se presentan los retos y se describe brevemente la metodología propuesta. En el Capítulo 2, se presenta la metodología de reconstrucción de entornos 3D propuesta y su rendimiento es evaluado tanto para espacios exteriores como para espacios interiores. El motor de trazado de rayos desarrollado y el método de modelado de propagación de radio propuesto se describen en detalle en el Capítulo 3, evaluándose en términos de eficiencia computacional y precisión. En el Capítulo 4 se presenta el modelado de los parámetros importantes de las WSNs y el algoritmo de planificación de optimización multi-objetivo propuesto, el rendimiento se compara con los otros algoritmos de planificación descritos en el estado del arte. La herramienta inteligente de planificación de redes de sensores inalámbricas, iMOST, se describe en el Capítulo 5. En el Capítulo 6 se llevan a cabo despliegues reales de acuerdo a las soluciones previstas para los escenarios interiores y exteriores, se miden los datos importantes y se analizan los resultados. En el Capítulo 7 se concluye la tesis y se discute acerca de los trabajos futuros.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Este trabajo se centra en la construcción de la parte física del personaje virtual. El desarrollo muestra téecnicas de modelado 3D, cinemática y animación usadas para la creación de personajes virtuales. Se incluye además una implementación que está dividida en: modelado del personaje virtual, creación de un sistema de cinemática inversa y la creación de animaciones utilizando el sistema de cinemática. Primero, crear un modelo 3D exacto al diseño original, segundo, el desarrollo de un sistema de cinemática inversa que resuelva con exactitud las posiciones de las partes articuladas que forman el personaje virtual, y tercero, la creación de animaciones haciendo uso del sistema de cinemática para conseguir animaciones fluidas y depuradas. Como consecuencia, se ha obtenido un componente 3D animado, reutilizable, ampliable, y exportable a otros entornos virtuales. ---ABSTRACT---This article is pointed in the making of the physical part of the virtual character. Development shows modeling 3D, kinematic and animation techniques used for create the virtual character. In addition, an implementation is included, and it is divided in: to model the 3D character, to create an inverse kinematics system, and to create animations using a kinematic system. First, creating an exact 3D model from the original design, second, developing an inverse kinematics system that resolves the positions of the articulated pieces that compose the virtual character, and third, creating animation using the inverse kinematics system to get fluid and refined animations in realtime. As consequence, a 3D animated, reusable, extendable and to other virtual environments exportable component has been obtained.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

El siguiente trabajo abarca todo el proceso llevado a cabo para el rediseño de un sistema automático de tutoría que se integra con laboratorios virtuales desarrollados para la realización de prácticas por parte de estudiantes dentro de entornos virtuales tridimensionales. Los principales objetivos de este rediseño son la mejora del rendimiento del sistema automático de tutoría, haciéndolo más eficiente y por tanto permitiendo a un mayor número de estudiantes realizar una práctica al mismo tiempo. Además, este rediseño permitirá que el tutor se pueda integrar con otros motores gráficos con un coste relativamente bajo. Se realiza en primer lugar una introducción a los principales conceptos manejados en este trabajo así como algunos aspectos relacionados con trabajos previos a este rediseño del tutor automático, concretamente la versión anterior del tutor ligada a la plataforma OpenSim. Acto seguido se detallarán qué requisitos funcionales cumplirá así como las ventajas que aportará este nuevo diseño. A continuación, se explicará el desarrollo del trabajo donde se podrá ver cómo se ha reestructurado el antiguo sistema de tutoría, la aplicación de un diseño orientado a objetos y los distintos paquetes y clases que lo conforman. Por último, se detallarán las conclusiones obtenidas durante el desarrollo del trabajo así como la implicación del trabajo aquí mostrado en futuros desarrollos.---ABSTRACT--- The following work shows the process that has been carried out in order to redesign an automatic tutoring system that can be integrated into virtual laboratories developed for supporting students’ practices in 3D virtual environments. The main goals of this redesign are the improvement of automatic tutoring system performance, making it more efficient and therefore allowing more students to perform a practice at the same time. Furthermore, this redesign allows the tutor to be integrated with other graphic engines with a relative low cost. Firstly, we begin with an introduction to the main concepts used in this work and some aspects concerning the related previous works to this automatic tutoring system redesign, such as the previous version of the tutoring system bound to OpenSim. Secondly, it will be detailed what functional requirements are met and what advantages this new tutoring system will provide. Next, it will be explained how this work has been developed, how the previous tutoring system has been restructured, how an object-oriented design is applied and the classes and packages derived from this design. Finally, it will be outlined the conclusions drawn in the development of this work as well as how this work will take part in future works.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

En esta Tesis se plantea una nueva forma de entender la evacuación apoyándonos en tecnologías existentes y accesibles que nos permitirán ver este proceso como un ente dinámico. Se trata de una metodología que implica no solo el uso de herramientas de análisis que permitan la definición de planes de evacuación en tiempo real, sino que también se apunta hacia la creación de una infraestructura física que permita alimentar con información actualizada al sistema de forma que, según la situación y la evolución de la emergencia, sea posible realizar planes alternativos que se adapten a las nuevas circunstancias. En base a esto, el sistema asimilará toda esa información y aportará soluciones que faciliten la toma de decisiones durante toda la evolución del incidente. Las aportaciones originales de esta Tesis son múltiples y muy variadas, pudiéndolas resumir en los siguientes puntos: 1. Estudio completo del estado del arte: a. Detección y análisis de diferentes proyectos a nivel internacional que de forma parcial tratan algunos aspectos desarrollados en la Tesis. b. Completo estudio a nivel mundial del software desarrollado total o parcialmente para la simulación del comportamiento humano y análisis de procesos de evacuación. Se ha generado una base de datos que cataloga de forma exhaustiva estas aplicaciones, permitiendo realizar un completo análisis y posibilitando la evolución futura de los contenidos de la misma. En la tesis se han analizado casi un centenar de desarrollos, pero el objetivo es seguir completando esta base de datos debido a la gran utilidad y a las importantes posibilidades que ofrece. 2. Desarrollo de un importante capítulo que trata sobre la posibilidad de utilizar entornos virtuales como alternativa intermedia al uso de simuladores y simulacros. En esta sección se divide en dos bloques: a. Ensayos en entornos reales y virtuales. b. Ensayos en entornos virtuales (pruebas realizadas con varios entornos virtuales). 3. Desarrollo de e-Flow net design: paquete de herramientas desarrolladas sobre Rhinoceros para el diseño de la red de evacuación basada en los elementos definidos en la tesis: Nodes, paths, Relations y Areas. 4. Desarrollo de e-Flow Simulator: Conjunto de herramientas que transforman Rhinoceros en un simulador 3D de comportamiento humano. Este simulador, de desarrollo propio, incorpora un novedoso algoritmo de comportamiento a nivel de individuo que incluye aspectos que no se han encontrado en otros simuladores. Esta herramienta permite realizar simulaciones programadas de grupos de individuos cuyo comportamiento se basa en el análisis del entorno y en la presencia de referencias dinámicas. Incluye otras importantes novedades como por ejemplo: herramientas para análisis de la señalización, elementos de señalización dinámica, incorporación sencilla de obstáculos, etc. También se ha creado una herramienta que posibilita la implementación del movimiento del propio escenario simulando la oscilación del mismo, con objeto de reflejar la influencia del movimiento del buque en el desplazamiento de los individuos. 5. En una fase avanzada del desarrollo, se incorporó la posibilidad de generar un vídeo de toda la simulación, momento a partir del cual, se han documentado todas las pruebas (y se continúan documentando) en una base de datos que recoge todas las características de las simulaciones, los problemas detectados, etc. Estas pruebas constituyen, en el momento en que se ha cerrado la redacción de la Tesis, un total de 81 GB de datos. Generación y análisis de rutas en base a la red de evacuación creada con e-Flow Net design y las simulaciones realizadas con e-Flow Net simulator. a. Análisis para la optimización de la configuración de la red en base a los nodos por área existentes. b. Definición de procesos previos al cálculo de rutas posibles. c. Cálculo de rutas: i. Análisis de los diferentes algoritmos que existen en la actualidad para la optimización de rutas. ii. Desarrollo de una nueva familia de algoritmos que he denominado “Minimum Decision Algorithm (MDA)”, siendo los algoritmos que componen esta familia: 1. MDA básico. 2. MDA mínimo. 3. MDA de no interferencia espacial. 4. MDA de expansión. 5. MDA de expansión ordenada para un único origen. 6. MDA de expansión ordenada. iii. Todos estos algoritmos se han implementado en la aplicación e-Flow creada en la Tesis para el análisis de rutas y que constituye el núcleo del Sistema de Ayuda al Capitán. d. Determinación de las alternativas para el plan de evacuación. Tras la definición de las rutas posibles, se describen diferentes procesos existentes de análisis por ponderación en base a criterios, para pasar finalmente a definir el método de desarrollo propio propuesto en esta Tesis y cuyo objetivo es responder en base a la población de rutas posibles obtenidas mediante los algoritmos MDA, qué combinación de rutas constituyen el Plan o Planes más adecuados para cada situación. La metodología creada para la selección de combinaciones de rutas que determinan un Plan completo, se basa en cuatro criterios básicos que tras su aplicación ofrecen las mejores alternativas. En esta fase también se incluye un complejo análisis de evolución temporal que incorpora novedosas definiciones y formulaciones. e. Derivado de la definición de la metodología creada en esta Tesis para la realización de los análisis de evolución temporal, se ha podido definir un nuevo teorema matemático que se ha bautizado como “Familia de cuadriláteros de área constante”. 7. Especificación de la infraestructura física del Sistema de Ayuda al Capitán: parte fundamental de sistema es la infraestructura física sobre la que se sustentaría. Esta infraestructura estaría compuesta por sensores, actuadores, aplicaciones para dispositivos móviles, etc. En este capítulo se analizan los diferentes elementos que la constituirían y las tecnologías implicadas. 8. Especificación de la infraestructura de servicios. 9. Creación del Blog Virtual Environments (http://epcinnova-virtualenvironments.blogspot.com.es/) en el que se han publicado todas las pruebas realizadas en el capítulo que analiza los entornos virtuales como alternativa a los simuladores y a los ensayos en laboratorio o los simulacros, incluyendo en muchos casos la posibilidad de que el visitante del blog pueda realizar la simulación en el entorno virtual. Este blog también incluye otras secciones que se han trabajado durante la Tesis: • Recopilación de diferentes entornos virtuales existentes. • Diagrama que recopila información sobre accidentes tanto en el ámbito marítimo como en el terrestre (en desarrollo). • Esquema propuesto para el acopio de información obtenida a partir de un simulacro. 10. Esta Tesis es la base para el proyecto e-Flow (nombre de una de las aplicaciones que desarrolladas en esta obra), un proyecto en el que el autor de esta Tesis ha trabajado como Project Manager. En el proyecto participa un consorcio de empresas y la UPM, y tiene como objetivo trasladar a la realidad gran parte de los planteamientos e ideas presentadas en esta Tesis. Este proyecto incluye el desarrollo de la infraestructura física y de servicios que permitirán, entre otras cosas, implementar en infraestructuras complejas una plataforma que posibilita la evacuación dinámica y un control ubicuo de los sistemas de monitorización y actuación implementados. En estos momentos se está finalizando el proyecto, cuyo objetivo final es la implementación de un piloto en un Hospital. También destacamos los siguientes avances a nivel de difusión científico-tecnológico: • Ponencia en el “52 congreso de la Ingeniería Naval en España” presentando un artículo “e-Flow- Sistema integral inteligente de soporte a la evacuación”. En este artículo se trata tanto el proyecto e-Flow del que soy Project Manager, como esta Tesis Doctoral, al ser temas estrechamente vinculados. En 2014 se publicó en dos números de la Revista Ingeniería Naval el artículo presentado a estas jornadas. • Co-autor en el artículo “E-Flow: A communication system for user notification in dynamic evacuation scenarios” presentado en el 7th International Conference on Ubicuous Computing & Ambient Intelligence (UCAMI) celebrado en Costa Rica. Por último, una de las aportaciones más interesantes, es la definición de un gran número de líneas de investigación futuras en base a todos los avances realizados en esta Tesis. ABSTRACT With this Thesis a new approach for understanding evacuation process is considered, taking advantage of the existing and open technologies that will allow this process to be interpreted as a dynamic entity. The methodology involves not only tools that allows on.-time evacuation plans, but also creates a physical insfrastructure that makes possible to feed the system with information on real time so, considering in each moment the real situation as well as the specific emergency development it will be feasible to generate alternative plans that responds to the current emergency situation. In this respect, the system will store all this information and will feedback with solutions that will help the decision making along the evacuation process. The innovative and singular contributions of this Thesis are numerous and rich, summarised as follows: 1.- Complete state-of-art study: a. Detection and analysis of different projects on an international level that, although partially, deal with some aspects developed in this Thesis. b. Thorough study at a international level of the developed software - total or partially done - for the simulation of the human behaviour and evacuation processes analysis. A database has been generated that classifies in detail these applications allowing to perform a full analysis and leading to future evolution of its contents. Within the Thesis work, almost a hundred of developments have been analysed but the purpose is to keep up updating this database due to the broad applications and possibilities that it involves. 2. Development of an important chapter that studies the possibility of using virtual scenarios as mid-term alternative for the use of simulations. This section is divided in two blocks: a. Trials in virtual and real scenarios b. Trials in virutal scenarios (trials performed with several ones). 3. E-Flow net design development: Set of tools developed under Rhinoceros for the evacuation net design based on the elements defined in the Thesis: Nodes, Paths, Relations, Areas 4. E-Flow simulator development: Set of tools that uses Rhinoceros as a 3D simulator of human behaviour. This simulator, of my own design, includes a new and original algorithm of human behaviour that involves aspects that are not found in other simulators. This tool allows to perform groups programmed simulations which behaviour is based on their enviroment analysis and presence of dynamic references. It includes other important innovations as for example: tools for signals analysis, dynamic signal elements, easy obstacle adding etc... More over, a tool that allows the own scenario movement implementation has been created by simulating the own oscillation movement, with the purpose of playing the vessel movement's influences in the individuals' displacements. 5. In an advanced stage of the development, the possibility of generating a video recording of all the simulation was also integrated, then from that moment all tests have been filed (and keep on doing so) in a database that collects all simulation characteristics, failures detected, etc. These stored tests amounts to a total of 81 GB at the moment of finishing the Thesis work. Generation and analysis of paths regarding the evacuation net created with E-Flow design and the simulations performed with E-Flow net Simulator. a. Analysis for the optimisation of the network configuration based in the existing nodes per area. b. Definition of the processes previous to the calculation of the feasible paths c. Paths calculation: i. Analysis of the different algorithms on existance nowadays for the routes optimisation. ii. Development of a new family of algorithms that I have called “Minimum Decision Algorithm (MDA)”, being composed of: 1. MDA basic 2. MDA minimum 3. MDA of not spacial interference 4. MDA of expansion (es de extenderse) o enlargement ( es de crecimiento) 5. MDA of organised expansion for a single origin (of organised enlargement for a single origin) 6. MDA of organised expansion (of organised enlargement) iii. All these algorithms have been implemented in the E-Flow application created in the Thesis dfor the routes analysis and it is the core of the Captain's support system. d. Determination of the alternatives for the evacuation plan. After defining all possible paths, different processes of analysis existing for weighing-based criteria are described, thus to end defining the own development method proposed in this Thesis and that aims to respond in an agreggation of possible routes basis obtained by means of the MDA algorithms what is the routes' combination more suitable for the Plan or Plans in every situation. The methodology created fot the selection of the combinations of routes that determine a complete Plan is baesd in four basic criteria that after applying, offer the best alternatives. In this stage a complex analysis of the progress along time is also included, that adds original and innovative defintions and formulations. e. Originated from the methodology created in this Thesis for the perfoming of the analysy of the progress along time, a new mathematic theorem has been defined, that has been called as "Family of quadrilateral of constant area". 7. Specification of the physiscal infrastructure of the Captain's help system: essential part is this physical infrastructure that will support it. This system will be made of sensors, actuators, apps for mobile devices etc... Within this chapter the different elements and technologies that make up this infrastructure will be studied. 8. Specification for the services infrastructure. 9. Start up of the Blog. " Virtual Environments (http://epcinnova-virtualenvironments.blogspot.com.es/)" in which all tests performed have been published in terms of analysis of the virtual enviroments as alternative to the simulators as well as to the laboratory experiments or simulations, including in most of the cases the possibility that the visitor can perform the simulation within the virtual enviroment. This blog also includes other sections that have been worked along and within this Thesis: - Collection of different virtual scenarios existent. - Schema that gathers information concerning accidents for maritime and terrestrial areas (under development) - Schema proposed for the collecting of information obtained from a simulation. 10. This Thesis is the basis of the E-Flow project (name of one of the applications developed in this work), a project in which the Thesis' author has worked in as Project Manager. In the project takes part a consortium of firms as well as the UPM and the aim is to bring to real life most part of the approaches and ideas contained in this Thesis. This project includes the development of the physical infrastructure as well as the services that will allow, among others, implement in complex infrastrucutres a platform that will make possible a dynamic evacuation and a continuous control of the monitoring and acting systems implemented. At the moment the project is getting to an end which goal is the implementation of a pilot project in a Hospital. We also would like to highlight the following advances concerning the scientific-technology divulgation: • Talk in the " 52th Congress of the Naval Engineering in Spain" with the article "E-Flow . Intelligent system integrated for supporting evacuation". This paper is about project E-Flow which I am Project Manager of, as well as this Thesis for the Doctorate, being both closely related. Two papers published In 2014 in the Naval Engineering Magazine. • Co-author in the article “E-Flow: A communication system for user notification in dynamic evacuation scenarios” [17] introduced in the 7th International Conference on Ubicuous Computing & Ambient Intelligence (UCAMI) held in Costa Rica. Last, but not least, one of the more interesting contributions is the defintion of several lines of research in the future, based on the advances made in this Thesis.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Los recientes avances tecnológicos han encontrado un potencial campo de explotación en la educación asistida por computador. A finales de los años 90 surgió un nuevo campo de investigación denominado Entornos Virtuales Inteligentes para el Entrenamiento y/o Enseñanza (EVIEs), que combinan dos áreas de gran complejidad: Los Entornos Virtuales (EVs) y los Sistemas de Tutoría Inteligente (STIs). De este modo, los beneficios de los entornos 3D (simulación de entornos de alto riesgo o entornos de difícil uso, etc.) pueden combinarse con aquéllos de un STIs (personalización de materias y presentaciones, adaptación de la estrategia de tutoría a las necesidades del estudiante, etc.) para proporcionar soluciones educativas/de entrenamiento con valores añadidos. El Modelo del Estudiante, núcleo de un SIT, representa el conocimiento y características del estudiante, y refleja el proceso de razonamiento del estudiante. Su complejidad es incluso superior cuando los STIs se aplican a EVs porque las nuevas posibilidades de interacción proporcionadas por estos entornos deben considerarse como nuevos elementos de información clave para el modelado del estudiante, incidiendo en todo el proceso educativo: el camino seguido por el estudiante durante su navegación a través de escenarios 3D; el comportamiento no verbal tal como la dirección de la mirada; nuevos tipos de pistas e instrucciones que el módulo de tutoría puede proporcionar al estudiante; nuevos tipos de preguntas que el estudiante puede formular, etc. Por consiguiente, es necesario que la estructura de los STIs, embebida en el EVIE, se enriquezca con estos aspectos, mientras mantiene una estructura clara, estructurada, y bien definida. La mayoría de las aproximaciones al Modelo del Estudiante en STIs y en IVETs no consideran una taxonomía de posibles conocimientos acerca del estudiante suficientemente completa. Además, la mayoría de ellas sólo tienen validez en ciertos dominios o es difícil su adaptación a diferentes STIs. Para vencer estas limitaciones, hemos propuesto, en el marco de esta tesis doctoral, un nuevo mecanismo de Modelado del Estudiante basado en la Ingeniería Ontológica e inspirado en principios pedagógicos, con un modelo de datos sobre el estudiante amplio y flexible que facilita su adaptación y extensión para diferentes STIs y aplicaciones de aprendizaje, además de un método de diagnóstico con capacidades de razonamiento no monótono. El método de diagnóstico es capaz de inferir el estado de los objetivos de aprendizaje contenidos en el SIT y, a partir de él, el estado de los conocimientos del estudiante durante su proceso de aprendizaje. La aproximación almodelado del estudiante propuesta ha sido implementada e integrada en un agente software (el agente de modelado del estudiante) dentro de una plataforma software existente para el desarrollo de EVIEs denominadaMAEVIF. Esta plataforma ha sido diseñada para ser fácilmente configurable para diferentes aplicaciones de aprendizaje. El modelado del estudiante presentado ha sido implementado e instanciado para dos tipos de entornos de aprendizaje: uno para aprendizaje del uso de interfaces gráficas de usuario en una aplicación software y para un Entorno Virtual para entrenamiento procedimental. Además, se ha desarrollado una metodología para guiar en la aplicación del esta aproximación de modelado del estudiante a cada sistema concreto.---ABSTRACT---Recent technological advances have found a potential field of exploitation in computeraided education. At the end of the 90’s a new research field emerged, the so-called Intelligent Virtual Environments for Training and/or Education (IVETs), which combines two areas of great complexity: Virtual Environments (VE) and Intelligent Tutoring Systems (ITS). In this way, the benefits of 3D environments (simulation of high risk or difficult-to-use environments, etc.) may be combined with those of an ITS (content and presentation customization, adaptation of the tutoring strategy to the student requirements, etc.) in order to provide added value educational/training solutions. The StudentModel, core of an ITS, represents the student’s knowledge and characteristics, and reflects the student’s reasoning process. Its complexity is even higher when the ITSs are applied on VEs because the new interaction possibilities offered by these environments must be considered as new key information pieces for student modelling, impacting all the educational process: the path followed by the student during their navigation through 3D scenarios; non-verbal behavior such as gaze direction; new types of hints or instructions that the tutoring module can provide to the student; new question types that the student can ask, etc. Thus, it is necessary for the ITS structure, which is embedded in the IVET, to be enriched by these aspects, while keeping a clear, structured and well defined architecture. Most approaches to SM on ITSs and IVETs don’t consider a complete enough taxonomy of possible knowledge about the student. In addition, most of them have validity only in certain domains or they are hard to be adapted for different ITSs. In order to overcome these limitations, we have proposed, in the framework of this doctoral research project, a newStudentModeling mechanism that is based onOntological Engineering and inspired on pedagogical principles, with a wide and flexible data model about the student that facilitates its adaptation and extension to different ITSs and learning applications, as well as a rich diagnosis method with non-monotonic reasoning capacities. The diagnosis method is able to infer the state of the learning objectives encompassed by the ITS and, fromit, the student’s knowledge state during the student’s process of learning. The proposed student modelling approach has been implemented and integrated in a software agent (the student modeling agent) within an existing software platform for the development of IVETs called MAEVIF. This platform was designed to be easily configurable for different learning applications. The proposed student modeling has been implemented and it has been instantiated for two types of learning environments: one for learning to use the graphical user interface of a software application and a Virtual Environment for procedural training. In addition, a methodology to guide on the application of this student modeling approach to each specific system has been developed.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

One of the objectives of the European Higher Education Area is the promotion of collaborative and informal learning through the implementation of educational practices. 3D virtual environments become an ideal space for such activities. On the other hand, the problem of financing in Spanish universities has led to the search for new ways to optimize available resources. The Technical University of Madrid requires the use of laboratories which due to their dangerousness, duration or control of the developed processes are difficult to perform in real life. For this reason, we have developed several 3D laboratories in virtual environment. The laboratories are built on open source platform OpenSim. In this paper it is exposed the use of the OpenSim platform for these new teaching experiences and the new design of the software architecture. This architecture requires the adaptation of the platform to the needs of the users and the different laboratories of our University. We will explain the structure of the implemented architecture and the process of creating and configuring it. The proposed architecture is decentralized, each laboratory is housed in different an educational center. The architecture adds several services, among others, the creation and management of users automated, communication between external services and platforms in different program languages. Therefore, we achieve improving the user experience and rising the functionalities of laboratories.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Tradicionalmente, los entornos virtuales se han relacionado o vinculado de forma muy estrecha con campos como el diseño de escenarios tridimensionales o los videojuegos; dejando poco margen a poder pensar en sus aplicaciones en otros ámbitos. Sin embargo, estas tendencias pueden cambiar en tanto se demuestre que las aplicaciones y ventajas de estas facilidades software, se pueden extrapolar a su uso en el ámbito de la enseñanza y el aprendizaje. Estas aplicaciones son los conocidos como Entornos Virtuales Inteligentes (EVI); los cuales, tratan de usar un entorno virtual para llevar a cabo labores de enseñanza y tutoría, aportando ventajas como simulación de entornos peligrosos o tutorización personalizada; cosa que no podemos encontrar en la mayoría de los casos de las situaciones de enseñanza reales. Este trabajo trata de dar solución a una de las problemáticas que se plantean a la hora de trabajar con cualquier entorno virtual con el que nos encontremos y prepararlo para su cometido, sobre todo en aquellos enfocados a la enseñanza: dotar de forma automática e inteligente de una semántica propia a cada uno de los objetos que se encuentran en un entorno virtual y almacenar esta información para su posterior consulta o uso para otras tareas. Esto quiere decir que el objetivo principal de este trabajo, es el proceso de recolección de información que se considera importante de los objetos de los entornos virtuales, como pueden ser sus aspectos de la forma, tamaño o color. Aspectos que, por otra parte, son realmente importantes para poder caracterizar los objetos y hacerlos únicos en un entorno virtual donde, a priori, todos los objetos son los mismos a ojos de un ordenador. Este trabajo que puede parecer trivial en un principio, no lo es tanto; y servirá de sustento fundamental para que otras aplicaciones futuras o ya existentes puedan realizar sus tareas. Una de estas tareas pudiera ser la generación de indicaciones en lenguaje natural para guiar a usuarios a localizar objetos en un entorno virtual, como es el caso del proyecto LORO sobre el que se engloba este trabajo. Algunos ejemplos de uso de esta tarea pueden ser desde ayudar a cualquier usuario a encontrar sus llaves en su propia casa a ayudar a un cirujano a localizar cierta herramienta en un quirófano. Para ello, es indispensable conocer la semántica e información relevante de cada uno de los objetos que se presentan en la escena y diferenciarlos claramente del resto. La solución propuesta se trata de una completa aplicación integrada en el motor de videojuegos y escenarios 3D de mayor soporte del mundo como es Unity 3D, el cual se interrelaciona con ontologías para poder guardar la información de los objetos de cada escena. Esto hace que la aplicación tenga una potencial difusión, gracias a las herramientas antes mencionadas para su desarrollo y a que está pensada para tanto el usuario experto como el usuario común.---ABSTRACT---Traditionally, virtual environments have been related to tridimensional design and videogames; leaving a little margin to think about its applications in other fields. However, this tendencies can be changed as soon as it is proven that the applications and advantages of this software can be taken to the learning and teaching environment. This applications are known as intelligent virtual environments, these use the virtual environment to perform teaching and tutoring tasks; tasks we cannot find in most real life teaching situations. This project aims to give a solution to one of the problematics that appears when someone works with any virtual environments we may encounter and prepare it for its duty, mainly those environments dedicated to teaching: automatically and intelligently give its own semantic to the objects that are in any virtual environment and save this information for its posterior query or use in other tasks. The main purpose of this project is the information recollection process that considers the different important facts about the objects that are in the virtual environments, such as their shape, size or color. Facts that are very important for characterizing the objects; to make them unique in the environment where the objects are all the same to the computer’s eye. This project may seem banal in the beginning, but it is not, it will be the fundamental base for future applications. One of this applications may be a natural language indicator generator for guiding users to locate objects in a virtual environment, such as the LORO project, where this project is included. Some examples of the use of this task are: helping any user to find the keys of his house, helping a surgeon to find a tool in an operation room… For this goals, it is very important to know the semantics and the relevant information of each object of the scenario and differentiate each one of them from the rest. The solution for this proposal is a fully integrated application in the videogame and Unity 3D engine that is related to ontologies so it can save the object’s information in every scenario. The previously mentioned tools, as well as the idea that this application is made for an expert user as well as for a common user, make the application more spreadable.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The pedagogical exercise described here was used to investigate how spatial communication about the manipulation of objects in a virtual and physical space is communicated between remote partners. It continues work done by others. Where it differs from previous research in this area is in its use of a qualitative methodology to study how these types of interactions are structured, communicated and interpreted via text-based media. What emerged from the qualitative analysis are new insights over the previous quantitative investigations. This paper reports on completed research.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Using the resistance literature as an underpinning theoretical framework, this chapter analyzes how Web designers through their daily practices, (i) adopt recursive, adaptive, and resisting behavior regarding the inclusion of social cues online and (ii) shape the socio-technical power relationship between designers and other stakeholders. Five vignettes in the form of case studies with expert individual Web designers are used. Findings point out at three types of emerging resistance namely: market driven resistance, ideological resistance, and functional resistance. In addition, a series of propositions are provided linking the various themes. Furthermore, the authors suggest that stratification in Web designers’ type is occurring and that resistance offers a novel lens to analyze the debate.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Several studies suggest that computer-mediated communication can lead to decreases in group effectiveness and reduce satisfaction levels in terms of trust and comfort of its users. Supported by an experiment, where the emotional or affective aspects of communication were tested with the experimentation of two architectures, Direct Communication Architecture (DCA) and the Virtual Communication Architecture (VCA) this paper validates the thesis that, from the users’ perspective, there is no opposition to the acceptance of virtual environments and interfaces for communication, and that these environments are able to cope with the reconfiguration dynamics requirements of virtual teams or client-server relations in a virtual enterprise operation.