382 resultados para vidros e fosfatos
Resumo:
Pós-graduação em Química - IQ
Resumo:
This work consists of preparation and characterization of glasses containing transition noble metals and the study of optical properties of such materials. The glasses were prepared by quenching of the glass melt followed by heat treatment and polishing of the monoliths. The structural characterization of glasses was made using differential thermal analysis, X-ray, Raman and infrared spectroscopies, while the optical properties were studied by UV-Vis and M-Lines spectroscopies. Preliminary results have shown that the color of the glasses is dependent on both concentration of silver and the melting temperature of the melt. Controlled heat treatments have been used to induce the crystallization of Ag nanoparticles within the glass. The study of crystallization was accompanied by electron microscopy and UV-Vis spectroscopy. Data from electron diffraction, as well as chemical analysis, EDX, were obtained using a transmission electron microscope. EDX data have shown that the atomic percentage of Ag is higher on the nanoparticle. X-ray diffraction was used in order to characterize the composition of the crystals and cubic AgCl was identified as the main crystallized nanophase obtained after annealing
Resumo:
This work presents experimental results of some physical properties of antimony phosphate glasses with compositions (x) Sb2O3 - (1-x) P2O5 (x = 0.75, 0.85, 0.90). Mechanical, thermal, optical and electrical properties were investigated: density, elastic moduli (Young's moduli and Poisson's ratio), Vickers microhardness, coefficient of thermal expansion, glass transition temperature, refractive index and electrical conductivity (for x = 0.75). There was no evidence of electronic conductivity by bipolaron hopping. Measurements of energy dispersive spectroscopy (EDS) showed that volatilization of Sb2O3 takes place during the glass melting
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
This work was based on a case study of improvement of the warehouse layout of a multinational automotive glass sector, located in the State of Sao Paulo. The aim was to propose a layout template to be more effective and besides optimizing production would also promote an increase in warehouse packaging capacity for metal containers containing glasses, thus reducing operating costs. To achieve the desired purpose, it was developed two layout proposals and to this end inventory management tools have been used, such as ABC curve and the Spaghetti Diagram, and other concepts of Packaging Engineering and Logistics. By the end of this work, it was obtained as a result, a project in which it was possible to rearrange the packages according the demand, and the developed changes became the most efficient layout both in storage capacity as well as in the internal drive
Resumo:
Pós-graduação em Química - IQ
Scaffold nanoestruturado utilizando-se celulose bacteriana/fosfatos de cálcio para regeneração óssea
Resumo:
Pós-graduação em Biotecnologia - IQ
Resumo:
Silver containing heavy metal oxide glasses and glass ceramics of the system WO3-SbPO4-PbO-AgCl with different AgCl contents have been prepared and their thermal, structural and optical properties characterized. Glass ceramics containing metallic silver nanoparticles have been prepared by annealing glass samples at temperatures above the glass transition and analyzed by transmission electron microscopy and energy dispersive X-ray microanalysis. The presence of the metallic clusters has been also confirmed by the observation of a surface plasmon resonimce band in the visible range. Cyclic voltammetric measurements indicated the presence of metallic silver into the glasses, even before to perform the thermal treatment.
Resumo:
Máster Universitario International en Acuicultura. Trabajo presentado como requisito parcial para la obtención del Título de Máster Universitario Internacional en Acuicultura, otorgado por la Universidad de Las Palmas de Gran Canaria (ULPGC), el Instituto Canario de Ciencias Marinas (ICCM), y el Centro Internacional de Altos Estudios Agronómicos Mediterráneos de Zaragoza (CIHEAM)
Resumo:
El oasis bajo riego del río Mendoza, en la provincia argentina del mismo nombre -al igual que casi todas las ciudades en la actualidadpresenta problemas de avance de la urbanización sobre las tierras agrícolas, multiplicidad de usuarios y disminución de la disponibilidad del recurso hídrico, tanto en cantidad como en calidad. Si bien se destinan esfuerzos e inversiones tendientes a asegurar la disponibilidad de agua (mejora de eficiencias, ahorro de agua) no pasa lo mismo en relación con la preservación de su calidad. La agricultura mendocina resulta víctima de la contaminación producida por la urbanización y la industria a través del vuelco (puntual y/o difuso) de sus efluentes a la red de riego. Estudios realizados en el Oasis Norte de Mendoza pusieron de manifiesto la existencia de altos niveles de contaminación fosfatada en las aguas del río Mendoza. El presente trabajo tuvo como objetivo evaluar la evolución espacio-temporal y detectar las fuentes de esta contaminación. Los resultados del diagnóstico basado en una serie de muestreos realizados en 2003 - 2009 ponen de relieve la existencia de una moderada contaminación por fosfatos en las aguas del río Mendoza que riegan el Oasis Norte provincial. Asimismo, se detectaron niveles considerablemente altos de fosfatos en tres sitios específicos del oasis: 1. la superficie regadía servida por los canales Cacique Guaymallén y Jocolí -se observa un incremento de seis veces el contenido de fosfatos del agua: de 0,2 mg L-1 (R I) a 1,2 mg L-1 (C II)-; en este último sitio sólo se riega un pequeño sector que se aproxima a las 7.300 ha; 2. la superficie regada por el Colector Pescara aguas abajo del punto D VIII (1.250 ha), en la que los valores medios arrojaron un contenido diecisiete veces mayor (8,5 mg L-1 ) que los del sitio D I (0,49 mg L-1 ) que recibe desagües agrícolas y urbano pluviales; 3. la zona del Bajo río Mendoza (en esta zona se registró un aumento de dieciséis veces más fosfatos entre la parte media y la cola del sistema, con valores medios de 0,2 mg L-1 en el sitio R II y de 3,25 mg L-1 en R III).
Resumo:
Lubricants and cutting middle distillates typically have large amounts of n-paraffins to increase its freezing point and fluidity. Accordingly, the removal of n-paraffins of long chain lubricants oils and diesel is essential to get a product with good cold flow properties. The development of new catalysts, which exhibit thermal stability and catalytic activity for the hydroisomerization reaction is still a challenge. Thus, silicoaluminophosphates (SAPO) were synthesized by different routes. Have been used also post-synthesis treatment for obtaining hybrid structures and others synthesis have been carried out with mesoporous template (soft and hard-template). Therefore, SAPO have been impregnated with H2PtCl6 solution by the incipient wetness method. Then assessments of catalytic activities in hydroisomerization and hydrocracking reactions of hexadecane have been held. Besides SAPO, niobium phosphate - NbP - were also impregnated with platinum and evaluated in the same reaction. After impregnation, these catalysts have been characterized by X-ray diffraction (XRD), nitrogen adsorption, infrared spectroscopy with adsorbed pyridine (IV-PY), scanning electron microscopy (SEM) and resonance nuclear magnetic 29Si (29Si-NMR). The characterization results by XRD have shown that it has been possible to obtain mesoporous SAPOs. However, for the syntheses with soft template there was collapse of the structure after removal of the organic template. Even so, these catalysts have been actives. It was possible to obtain hybrid materials through the synthesis of SAPO-11 made with hard templates and by means of post-synthesis treatments samples of SAPO-11. Moreover, NbP has shown characteristic XRD of amorphous materials, with high acidity and were active in the conversion of hexadecane.
Resumo:
Lubricants and cutting middle distillates typically have large amounts of n-paraffins to increase its freezing point and fluidity. Accordingly, the removal of n-paraffins of long chain lubricants oils and diesel is essential to get a product with good cold flow properties. The development of new catalysts, which exhibit thermal stability and catalytic activity for the hydroisomerization reaction is still a challenge. Thus, silicoaluminophosphates (SAPO) were synthesized by different routes. Have been used also post-synthesis treatment for obtaining hybrid structures and others synthesis have been carried out with mesoporous template (soft and hard-template). Therefore, SAPO have been impregnated with H2PtCl6 solution by the incipient wetness method. Then assessments of catalytic activities in hydroisomerization and hydrocracking reactions of hexadecane have been held. Besides SAPO, niobium phosphate - NbP - were also impregnated with platinum and evaluated in the same reaction. After impregnation, these catalysts have been characterized by X-ray diffraction (XRD), nitrogen adsorption, infrared spectroscopy with adsorbed pyridine (IV-PY), scanning electron microscopy (SEM) and resonance nuclear magnetic 29Si (29Si-NMR). The characterization results by XRD have shown that it has been possible to obtain mesoporous SAPOs. However, for the syntheses with soft template there was collapse of the structure after removal of the organic template. Even so, these catalysts have been actives. It was possible to obtain hybrid materials through the synthesis of SAPO-11 made with hard templates and by means of post-synthesis treatments samples of SAPO-11. Moreover, NbP has shown characteristic XRD of amorphous materials, with high acidity and were active in the conversion of hexadecane.
Resumo:
Actualmente, hay un gran interés en el desarrollo de nuevos biomateriales debido a su enorme contribución a las demandas de una sociedad cada vez más envejecida que necesita alternativas para el tratamiento del cáncer o las enfermedades de los tejidos duros, Los primeros biomateriales se desarrollaron para que fuesen lo más bioinertes posible, A partir de los años 70's y 80's del siglo XX, comenzaron a investigarse biomateriales bioactivos o biodegradables, incluyendo algunos fosfatos de calcio y los vidrios bioactivos, En la actualidad, el interés se enfoca hacia la síntesis de biomateriales con mesoestructura controlada y funcionalizados para mejorar y adaptar su comportamiento en el cuerpo, Por otra parte, para aplicaciones de ingeniería de tejido óseo, los biomateriales se procesan como andamios 3D capaces de ser funcionalizados con señales bioquímicas y células. Asimismo, algunas estrategias recientes para la terapia del cáncer se basan en nanopartículas mesoporosas que son capaces de transportar drogas o material genético cuando se inyectan en el torrente sanguíneo, sin ser retiradas de la circulación por los macrófagos...