Identifying pedagogical, technological and organizational barriers in virtual learning environments

Virtual learning environments are online spaces where learners interact with other learners, teachers, resources and the environment in itself. Although technology is meant to enhance the learning process, there are important issues regarding pedagogical and organizational aspects that must be addressed. In this paper we review the barriers detected in a virtual university which exclusively uses Internet as the main channel of communication, with no face-to-face requirements exceptthose related to final evaluation.

Technological solution for the automatic replacement of the catalytic filaments in HWCVD

The degradation of the catalytic filaments is the main factor limiting the industrial implementation of the hot wire chemical vapor deposition (HWCVD) technique. Up to now, no solution has been found to protect the catalytic filaments used in HWCVD without compromising their catalytic activity. Probably, the definitive solution relies on the automatic replacement of the catalytic filaments. In this work, the results of the validation tests of a new apparatus for the automatic replacement of the catalytic filaments are reported. The functionalities of the different parts have been validated using a 0.2 mm diameter tungsten filament under uc-Si:H deposition conditions.

Does social capital reinforce technological inputs in the creation of knowledge? Evidence from the Spanish regions

In this paper we seek to verify the hypothesis that trust and cooperation between individuals, and between them and public institutions, can encourage technological innovation and the adoption of knowledge. Additionally, we test the extent to which the interaction of social capital with human capital and R&D expenditures improve their effect on a region’s ability to innovate. Our empirical evidence is taken from the Spanish regions and employs a knowledge production function and longitudinal count data models. Our results suggest that social capital correlates positively with innovation. Further, our analysis reveals a powerful interaction between human and social capital in the production of knowledge, whilst the complementarity with R&D efforts would seem less clear.

Technological and business challenges of smart grids

Growing recognition of the electricity grid modernization to enable new electricity generation and consumption schemes has found articulation in the vision of the Smart Grid platform. The essence of this vision is an autonomous network with two-way electricity power flows and extensive real-time information between the generation nodes, various electricity-dependent appliances and all points in-between. Three major components of the Smart Grids are distributed intelligence, communication technologies, and automated control systems. The aim of this thesis is to recognize the challenges that Smart Grids are facing, while extinguishing the main driving factors for their introduction. The scope of the thesis also covers possible place of electricity Aggregator Company in the current and future electricity markets. Basic functions of an aggregator and possible revenue sources along with demand response feasibility calculations are reviewed within this thesis.

Forest Biomass Resources and Technological Prospects for the Production of Second-generation Biofuels in Finland by 2020

Introduction of second-generation biofuels is an essential factor for meeting the EU’s 2020 targets for renewable energy in the transport sector and enabling the more ambitious targets for 2030. Finland’s forest industry is strongly involved in the development and commercialising of second-generation biofuel production technologies. The goal of this paper is to provide a quantified insight into Finnish prospects for reaching the 2020 national renewable energy targets and concurrently becoming a large-scale producer of forest biomass based second-generation biofuels feeding the increasing demand in European markets. The focus of the paper is on assessing the potential for utilising forest biomass for liquid biofuels up to 2020. In addition, technological issues related to the production of second-generation biofuels were reviewed. Finland has good opportunities to realise a scenario to meet 2020 renewable energy targets and for large-scale production of wood based biofuels. In 2020, biofuel production from domestic forest biomass in Finland may reach nearly a million ton (40 PJ). With the existing biofuel production capacity (20 PJ/yr) and national biofuel consumption target (25 PJ) taken into account, the potential net export of biofuels from Finland in 2020 would be 35 PJ, corresponding to 2–3% of European demand. Commercialisation of second-generation biofuel production technologies, high utilisation of the sustainable harvesting potential of Finnish forest biomass, and allocation of a significant proportion of the pulpwood harvesting potential for energy purposes are prerequisites for this scenario. Large-scale import of raw biomass would enable remarkably greater biofuel production than is described in this paper.

EVALUATION OF TECHNOLOGICAL INTENSITY OF EXPORTS IN THE FORESTRY SECTOR

ABSTRACT One of the fastest growing sectors in the domestic industry is the forestry, which has contributed significantly to economic development, job creation, income taxes, putting Brazil in a prominent position in the world market. This paper analyzes the evolution of the technological intensity of 12 main products exported by the sector, from 2000 to 2011. For that, utilizes an indicator called PRODY, which allows classifying different products according to their technological intensity or income content and considers the GDP per capita of exporting countries of each product, weighted by its revealed comparative advantage. It can be seen by the results, a continuous growth in all products' technology indicators and their decomposition into income effects, comparative advantage and joint effects, allowed to verify the main causes of this growth. Products with lower PRODY values are those that presented a higher evolution during the period studied. Products of higher processing, and those from pulp and paper industry, had greater technological advances, thanks to a joint effect, while the ones of lower processing, had a technological improvement due to the increase in GDP per capita in exporting countries. Sawn wood was the standout product, being the only one who proved to be dependent of comparative advantage effect, confirming that this industry has been reinventing itself and incorporating, in fact, more technology. This study revealed the importance of technological intensification to generate comparative advantage and be able to stand against international competition.

Energetic analysis of landrace varieties and hybrids of corn produced in different technological levels of management

The aim of this study was to analyze, under the energetic point of view, the cultivation of corn in three management systems (low, medium and high-tech), using two landrace varieties ('Argentino' and 'BR da Várzea'), a double hybrid cultivar (SHS 4080) and a simple hybrid (IAC 8333). Five performance indicators were used: energy efficiency, liquid cultural energy, cultural efficiency, energy balance and productive energy efficiency. From the perspective of family farming, it was verified the largest social importance of the systems under low and medium levels of technology, due to the increase employment capacity of rural labor. The liquid cultural energy and energy balance were more favorable for the system under high technological level, unlike cultural efficiency and productive energy efficiency, which were significantly higher for medium and low technological levels. The variety 'Argentino' showed lower productive energy efficiency. The variety 'BR da Várzea', on the other hand, presented the potential to generate energy as much as the hybrids. In general, the biggest sustainability in the corn crop was achieved when the management system under medium and lower levels of technology were used.

Technological development of 40mg furosemide tablets: equivalence and bioavaibility study in dogs

Furosemide (40mg) was administered to 20 street dogs, 10 males and 10 females, in two different pharmaceutical forms: (1) compressed furosemide 40mg formulated at the Federal University of Pernambuco (UFPE-tablet), and (2) a commercial formulation with equal bioequivalence produced by the Laboratory for Pharmaceutical Technology of Pernambuco State (LAFEPE), the LAFEPE-furosemide. The study aimed to evaluate the kinetics of dissolution of the UFPE-tablet in order to analyze the behavior of bioavailability of the best formulation for veterinary use. The plasmatic concentrations of furosemide for the determination of parameters of pharmacological kinetics were analyzed by high-performance liquid chromatographic method (HPLC). The in vitro study accomplished through physiochemical analyses demonstrated that the formulas of the furosemide tablets attained the pharmaceutical requirements in agreement with USP 23 and the Brazilian Pharmacopoeia. The evaluation accomplished in dogs with UFPE-tablets given in only dose demonstrated uniformity in blood levels indicating stability in maintenance of the pharmaceutical formulation and efficiency in absorption of the active compound. These values are not significantly different in relation to the 5% confidence limit. Regarding maximum concentration (Tmax) time and global bioavaibility assessed by AUC means, there were no considerable differences as well. UFPE-furosemide displayed 743.492µg/mL.h as AUC average value whereas LAFEPE-furosemide had an average of 537.284µg/mL.h.

Technological level and epidemiological aspects of sheep husbandry in Minas Gerais, southeastern Brazil

Epidemiological and health aspects of sheep husbandry were assessed on 213 sheep flocks in 142 municipalities from the state of Minas Gerais, southeastern Brazil. An updated questionnaire was filled out for each flock, requesting data on the farm, the flock and the farmer by the veterinarians of the State Government Agency for Animal Health (Instituto Mineiro de Agropecuária). Thirteen important variables were selected and scored to determine the technological level of the 117 farms; 0.9% of them was classified as high technological level, 45.3% as medium technological level and 53.0% as low technological level. Lamb production was the main objective of the farms and the main features were low-frequencies of individual identification of animals (16.9%), technical assistance (31.9%), use of quarantine for newly acquired animals (0.9%) the separation of animals by age group (3.7%) and requeste the sanitary certificate at purchasing of animals (11.7%). The main health problems reported were abortion (23.9%), keratoconjunctivitis (17.9%), contagious ecthyma (13.6%), pneumonia (10.3%), diarrhea (9.3%) and caseous lymphadenitis (6.1%). Information of the epidemiological situation and the mainly health measures used in the sheep farms are important to improve the productivity and quality of the lamb.

Images of the future of privacy: A privacy dynamics framework and a causal layered

The future of privacy in the information age is a highly debated topic. In particular, new and emerging technologies such as ICTs and cognitive technologies are seen as threats to privacy. This thesis explores images of the future of privacy among non-experts within the time frame from the present until the year 2050. The aims of the study are to conceptualise privacy as a social and dynamic phenomenon, to understand how privacy is conceptualised among citizens and to analyse ideal-typical images of the future of privacy using the causal layered analysis method. The theoretical background of the thesis combines critical futures studies and critical realism, and the empirical material is drawn from three focus group sessions held in spring 2012 as part of the PRACTIS project. From a critical realist perspective, privacy is conceptualised as a social institution which creates and maintains boundaries between normative circles and preserves the social freedom of individuals. Privacy changes when actors with particular interests engage in technology-enabled practices which challenge current privacy norms. The thesis adopts a position of technological realism as opposed to determinism or neutralism. In the empirical part, the focus group participants are divided into four clusters based on differences in privacy conceptions and perceived threats and solutions. The clusters are fundamentalists, pragmatists, individualists and collectivists. Correspondingly, four ideal-typical images of the future are composed: ‘drift to low privacy’, ‘continuity and benign evolution’, ‘privatised privacy and an uncertain future’, and ‘responsible future or moral decline’. The images are analysed using the four layers of causal layered analysis: litany, system, worldview and myth. Each image has its strengths and weaknesses. The individualistic images tend to be fatalistic in character while the collectivistic images are somewhat utopian. In addition, the images have two common weaknesses: lack of recognition of ongoing developments and simplistic conceptions of privacy based on a dichotomy between the individual and society. The thesis argues for a dialectical understanding of futures as present images of the future and as outcomes of real processes and mechanisms. The first steps in promoting desirable futures are the awareness of privacy as a social institution, the awareness of current images of the future, including their assumptions and weaknesses, and an attitude of responsibility where futures are seen as the consequences of present choices.

Lactobacillus plantarum AJ2 isolated from naturally fermented sausage and its effects on the technological properties of Milano-type salami

L. plantarum, strain AJ2, was isolated from naturally fermented sausage manufactured in the Southern region of Brazil and inoculated in Milano-type salami. The lactic culture exhibited the ability of growing in the product, decreasing pH in the first seven days of fermentation/maturation and the residual levels of nitrite and nitrate, as well as peroxide and TBARS values. The inoculated sausage had the highest intensity for brightness and red color, but did not present a difference in chemical composition and fatty acid composition, compared to the control.