Selection of common bean lines with high agronomic performance and high calcium and iron concentrations

The objective of this work was to evaluate the genetic variability of common bean lines for cycle, weight of 100 grains, grain yield, cooking time, and grain calcium and iron concentrations. Twenty-four common bean lines were evaluated in two crop cycles (2010 and 2011). The ¯Z index was used for the selection of superior lines for most of the traits. The DF 06-19, DF 06-03, DF 06-17, DF 06-20, DF 06-11, DF 06-14, DF 06-01, DF 06-08, DF 06-22, and DF 06-04 lines showed high grain yield. All lines were of semi-early cycle and of fast cooking. The DF 06-08 and DF 06-23 lines showed high calcium concentration in grains (>1.4 g kg-1 dry matter - DM), and the DF 06-09, DF 06-03, DF 06-04, and DF 06-06 lines presented high iron concentration in grains (>0.95 g kg-1 DM) in the two crop cycles. The DF 06-09 and DF 06-03 carioca lines present high agronomic performance and high iron concentration in grains. The DF 06-17 and DF 06-08 black lines present high agronomic performance and high calcium concentration in grains. The selection of the DF 06-09, DF 06-03, DF 06-17, and DF 06-08 lines is recommended.

Selection of bee species for environmental risk assessment of GM cotton in the Brazilian Cerrado

The objective of this work was to list potential candidate bee species for environmental risk assessment (ERA) of genetically modified (GM) cotton and to identify the most suited bee species for this task, according to their abundance and geographical distribution. Field inventories of bee on cotton flowers were performed in the states of Bahia and Mato Grosso, and in Distrito Federal, Brazil. During a 344 hour sampling, 3,470 bees from 74 species were recovered, at eight sites. Apis mellifera dominated the bee assemblages at all sites. Sampling at two sites that received no insecticide application was sufficient to identify the three most common and geographically widespread wild species: Paratrigona lineata, Melissoptila cnecomola, and Trigona spinipes, which could be useful indicators of pollination services in the ERA. Indirect ordination of common wild species revealed that insecticides reduced the number of native bee species and that interannual variation in bee assemblages may be low. Accumulation curves of rare bee species did not saturate, as expected in tropical and megadiverse regions. Species-based approaches are limited to analyze negative impacts of GM cotton on pollinator biological diversity. The accumulation rate of rare bee species, however, may be useful for evaluating possible negative effects of GM cotton on bee diversity.

Selection of the most informative morphoagronomic descriptors for cassava germplasm

The objective of this work was to select the most informative morphoagronomic descriptors for cassava (Manihot esculenta) germplasm and to evaluate the ability of different methods to select the descriptors. Ninety-five accessions were characterized using 51 morphoagronomic descriptors. Data were subjected to a multiple correspondence analysis (MCA), whose information was used in the following four methods of descriptor selection: reverse order of the descriptor for the pth factorial axis of the MCA (Jolliffe); sequential, multiple correspondence analysis (SMCA); mean of the contribution orders of the descriptor in the first three factorial axes (C3PA); and C3PA method weighted by the respective eigenvalues of the full analysis (C3PAWeig). The correlations between the dissimilarity matrix with all descriptors and the most informative descriptors were high and significant (0.75, 0.77, 0.83, and 0.84 for C3PAWeig, C3PA, SMCA, and Jolliffe, respectively). The less informative descriptors were discarded, considering those common among the selection methods and relevant for the breeding interests. Therefore, 32 morphoagronomic descriptors with correlation between the dissimilarity matrices (r=0.81) were selected, due to their high capacity to discriminate cassava germplasm and to their ability to maintain some preliminary agronomic traits, useful for the initial characterization of the germplasm.

The incidence and selection of multiple mating in plants.

Mating with more than one pollen donor, or polyandry, is common in land plants. In flowering plants, polyandry occurs when the pollen from different potential sires is distributed among the fruits of a single individual, or when pollen from more than one donor is deposited on the same stigma. Because polyandry typically leads to multiple paternity among or within fruits, it can be indirectly inferred on the basis of paternity analysis using molecular markers. A review of the literature indicates that polyandry is probably ubiquitous in plants except those that habitually self-fertilize, or that disperse their pollen in pollen packages, such as polyads or pollinia. Multiple mating may increase plants' female component by alleviating pollen limitation or by promoting competition among pollen grains from different potential sires. Accordingly, a number of traits have evolved that should promote polyandry at the flower level from the female's point of view, e.g. the prolongation of stigma receptivity or increases in stigma size. However, many floral traits, such as attractiveness, the physical manipulation of pollinators and pollen-dispensing mechanisms that lead to polyandrous pollination, have probably evolved in response to selection to promote male siring success in general, so that polyandry might often best be seen as a by-product of selection to enhance outcross siring success. In this sense, polyandry in plants is similar to geitonogamy (selfing caused by pollen transfer among flowers of the same plant), because both polyandry and geitonogamy probably result from selection to promote outcross siring success, although geitonogamy is almost always deleterious while polyandry in plants will seldom be so.

Pulmonary embolism severity index and troponin testing for the selection of low-risk patients with acute symptomatic pulmonary embolism.

Summary Background: The combination of the Pulmonary Embolism Severity Index (PESI) and troponin testing could help physicians identify appropriate patients with acute pulmonary embolism (PE) for early hospital discharge. Methods: This prospective cohort study included a total of 567 patients from a single center registry with objectively confirmed acute symptomatic PE. On the basis of the PESI, each patient was classified into 1 of 5 classes (I to V). At the time of hospital admission, patients had troponin I (cTnI) levels measured. The endpoint of the study was all-cause mortality within 30 days after diagnosis. We calculated the mortality rates in 4 patient groups: group 1: PESI class I-II plus cTnI <0.1 ng mL(-1); group 2: PESI classes III-V plus cTnI <0.1 ng mL(-1); group 3: PESI classes I-II plus cTnI >/= 0.1 ng mL(-1); and group 4: PESI classes III-V plus cTnI >/= 0.1 ng mL(-1). Results: The study cohort had a 30-day mortality of 10% (95% confidence interval [CI], 7.6 to 12.5%). Mortality rates in the 4 groups were 1.3%, 14.2%, 0% and 15.4%, respectively. Compared to non-elevated cTnl, the low-risk PESI had a higher negative predictive value (NPV) (98.9% vs 90.8%) and negative likelihood ratio (NLR) (0.1 vs 0.9) for predicting mortality. The addition of non-elevated cTnI to low-risk PESI did not improve the NPV or the NLR compared to either test alone. Conclusions: Compared to cTnl testing, PESI classification more accurately identified patients with PE who are at low risk of all-cause death within 30-days of presentation.

Market Area Selection of aSawmill Machinery Manufacturer

Tämän diplomityön tavoitteena on kartoittaa suomalaisen sahakonevalmistaja Veisto Oy:n kannalta lähitulevaisuuden merkittävimmät markkina-alueet, joiden sahateollisuuteen tehdään lähivuosina eniten korkean teknologian investointeja. Markkina-alueiden valinnassa sovelletaan sekä numeerisiin tilastoihin että asiantuntijahaastatteluihin pohjautuvia ranking-menetelmiä. Työn ensimmäinen osa käsittelee kansainvälisten teollisten markkinoiden ominaispiirteitä ja niiden analysointia. Pääpaino on kuitenkin screening-menetelmillä, markkina-alueiden vertailumenetelmilläja päätöksenteon työkaluilla. Työn toisessa osassa keskitytään markkina-alueiden screeningiin, analysointiin ja maiden eri ominaisuuksien vertailuun. Päätöksentekomatriiseja hyödyntäen valitaan Veisto Oy:lle kolme tällä hetkellä houkuttelevinta markkina-aluetta, joita ovat Venäjä, USA:n kaakkoisosan Southern Yellow Pine -alue sekä Etelä-Amerikan suurimmat sahaajamaat (Brasilia, Argentiina ja Chile) yhtenä alueena. Valituilla alueilla on Veiston kannalta omat haasteensa: USA:ssa vahvat kotimaiset kilpailijat ja uusien referenssien saaminen, Venäjällä investointien epävarmuus ja markkina-alueen laajuuden tuoma monimuotoisuus sekä Etelä-Amerikassa vahvat ruotsalaiset kilpailijat sekä etenkin Brasilian osalta tuntuvat suojatullit.

Adaptive changes in a radial maze task: Efficient selection of baited arms with reduced foraging in senescent hooded rats

Qualitative differences in strategy selection during foraging in a partially baited maze were assessed in young and old rats. The baited and non-baited arms were at a fixed position in space and marked by a specific olfactory cue. The senescent rats did more re-entries during the first four-trial block but were more rapid than the young rats in selecting the reinforced arms during the first visits. Dissociation between the olfactory spatial cue reference by rotating the maze revealed that only few old subjects relied on olfactory cues to select the baited arms and the remainder relied mainly on the visuo-spatial cues.

Review. Characterization and selection of hexaploid wheats containing resistance to Heterodera avenae or Mayetiola destructor introgressed from Aegilops

Cereal cyst nematode (CCN, Heterodera avenae) and Hessian fly (HF, Mayetiola destructor) are two major pests affecting wheat crops worldwide including important cereal areas of Spain. Aegilops ventricosa and Ae. triuncialis were used as donors in a strategy to introduce resistance genes (RG) for these pests in hexaploid wheat (Triticum aestivum L.). Two 42 chromosomes introgression lines have been derived from Ae. ventricosa: H-93-8 and H-93-33 carrying genes Cre2 and H27 conferring resistance to CCN and HF, respectively. Line TR-3531 with 42 chromosomes has been derived from Ae. triuncialis and carries RGs conferring resistance for CCN (Cre7) and for HF (H30). Alien material has been incorporated in lines H-93 by chromosomal substitution and recombination, while in line TR-3531 homoeologous recombination affecting small DNA fragments has played a major role. It has been demonstrated that Cre2, Cre7, H27 and H30 are major single dominant genes and not allelic of other previously described RGs. Biochemical and molecular-biology studies of the defense mechanism triggered by Cre2 and Cre7 have revealed specific induction of peroxidase and other antioxidant enzymes. In parallel to these basic studies advanced lines carrying resistance genes for CNN and/or HF have been developed. Selection was done using molecular markers for eventually «pyramiding» resistance genes. Several isozyme and RAPD markers have been described and, currently, new markers based on transposable elements and NBS-LRR sequences are being developed. At present, two advanced lines have already been included at the Spanish Catalogue of Commercial Plant Varieties.

Selection of internal control genes for real-time quantitative PCR in ovary and uterus of sows across pregnancy

Reproductive traits play a key role in pig production in order to reduce costs and increase economic returns. Among others, gene expression analyses represent a useful approach to study genetic mechanisms underlying reproductive traits in pigs. The application of reverse-transcription quantitative PCR requires the selection of appropriate reference genes, whose expression levels should not be affected by the experimental conditions, especially when comparing gene expression across different physiological stages.

Divergent evolution and purifying selection of the flaA gene sequences in Aeromonas

BACKGROUND: The bacterial flagellum is the most important organelle of motility in bacteria and plays a key role in many bacterial lifestyles, including virulence. The flagellum also provides a paradigm of how hierarchical gene regulation, intricate protein-protein interactions and controlled protein secretion can result in the assembly of a complex multi-protein structure tightly orchestrated in time and space. As if to stress its importance, plants and animals produce receptors specifically dedicated to the recognition of flagella. Aside from motility, the flagellum also moonlights as an adhesion and has been adapted by humans as a tool for peptide display. Flagellar sequence variation constitutes a marker with widespread potential uses for studies of population genetics and phylogeny of bacterial species. RESULTS: We sequenced the complete flagellin gene (flaA) in 18 different species and subspecies of Aeromonas. Sequences ranged in size from 870 (A. allosaccharophila) to 921 nucleotides (A. popoffii). The multiple alignment displayed 924 sites, 66 of which presented alignment gaps. The phylogenetic tree revealed the existence of two groups of species exhibiting different FlaA flagellins (FlaA1 and FlaA2). Maximum likelihood models of codon substitution were used to analyze flaA sequences. Likelihood ratio tests suggested a low variation in selective pressure among lineages, with an omega ratio of less than 1 indicating the presence of purifying selection in almost all cases. Only one site under potential diversifying selection was identified (isoleucine in position 179). However, 17 amino acid positions were inferred as sites that are likely to be under positive selection using the branch-site model. Ancestral reconstruction revealed that these 17 amino acids were among the amino acid changes detected in the ancestral sequence. CONCLUSION: The models applied to our set of sequences allowed us to determine the possible evolutionary pathway followed by the flaA gene in Aeromonas, suggesting that this gene have probably been evolving independently in the two groups of Aeromonas species since the divergence of a distant common ancestor after one or several episodes of positive selection. REVIEWERS: This article was reviewed by Alexey Kondrashov, John Logsdon and Olivier Tenaillon (nominated by Laurence D Hurst).

Reuse of information for selection of methods and operating conditions for drying of pharmaceutical materials

Drying is a major step in the manufacturing process in pharmaceutical industries, and the selection of dryer and operating conditions are sometimes a bottleneck. In spite of difficulties, the bottlenecks are taken care of with utmost care due to good manufacturing practices (GMP) and industries' image in the global market. The purpose of this work is to research the use of existing knowledge for the selection of dryer and its operating conditions for drying of pharmaceutical materials with the help of methods like case-based reasoning and decision trees to reduce time and expenditure for research. The work consisted of two major parts as follows: Literature survey on the theories of spray dying, case-based reasoning and decision trees; working part includes data acquisition and testing of the models based on existing and upgraded data. Testing resulted in a combination of two models, case-based reasoning and decision trees, leading to more specific results when compared to conventional methods.

Construction and validation of a scoring system for the selection of high-quality data in a Spanish population primary care database (SIDIAP)

Background Computerised databases of primary care clinical records are widely used for epidemiological research. In Catalonia, the InformationSystem for the Development of Research in Primary Care (SIDIAP) aims to promote the development of research based on high-quality validated data from primary care electronic medical records. Objective The purpose of this study is to create and validate a scoring system (Registry Quality Score, RQS) that will enable all primary care practices (PCPs) to be selected as providers of researchusable data based on the completeness of their registers. Methods Diseases that were likely to be representative of common diagnoses seen in primary care were selected for RQS calculations. The observed/ expected cases ratio was calculated for each disease. Once we had obtained an estimated value for this ratio for each of the selected conditions we added up the ratios calculated for each condition to obtain a final RQS. Rate comparisons between observed and published prevalences of diseases not included in the RQS calculations (atrial fibrillation, diabetes, obesity, schizophrenia, stroke, urinary incontinenceand Crohn’s disease) were used to set the RQS cutoff which will enable researchers to select PCPs with research-usable data. Results Apart from Crohn’s disease, all prevalences were the same as those published from the RQS fourth quintile (60th percentile) onwards. This RQS cut-off provided a total population of 1 936 443 (39.6% of the total SIDIAP population). Conclusions SIDIAP is highly representative of the population of Catalonia in terms of geographical, age and sex distributions. We report the usefulness of rate comparison as a valid method to establish research-usable data within primary care electronic medical records

Citation auctions as a method to improve selection of scientific papers

This paper describes the basis of citation auctions as a new approach to selecting scientific papers for publication. Our main idea is to use an auction for selecting papers for publication through - differently from the state of the art - bids that consist of the number of citations that a scientist expects to receive if the paper is published. Hence, a citation auction is the selection process itself, and no reviewers are involved. The benefits of the proposed approach are two-fold. First, the cost of refereeing will be either totally eliminated or significantly reduced, because the process of citation auction does not need prior understanding of the paper's content to judge the quality of its contribution. Additionally, the method will not prejudge the content of the paper, so it will increase the openness of publications to new ideas. Second, scientists will be much more committed to the quality of their papers, paying close attention to distributing and explaining their papers in detail to maximize the number of citations that the paper receives. Sample analyses of the number of citations collected in papers published in years 1999-2004 for one journal, and in years 2003-2005 for a series of conferences (in a totally different discipline), via Google scholar, are provided. Finally, a simple simulation of an auction is given to outline the behaviour of the citation auction approach

REPEATABILITY OF FRUITS AND SEEDS PRODUCTION AND SELECTION OF BRAZIL NUT GENOTYPES IN NATIVE POPULATIONS IN RORAIMA1

ABSTRACT This study estimates the repeatability coefficients of two production traits in two native populations of Brazil nut trees. It determines the number of years of suitable evaluations for an efficient selection process, determines the permanent phenotypic correlation between production traits and also the selection of promising trees in these populations. Populations, located in the Itã region (ITA) and in the in the Cujubim region (CUJ), are both belonging to the municipality of Caracaraí, state of Roraima - Brazil, and consist of 85 and 51 adult trees, respectively. Each tree was evaluated regarding the number of fruits per plant (NFP) and fresh seed weight per plant (SWP), for eight (ITA) and five consecutive years (CUJ). Statistical analyses were performed according to the mixed model methodology, using Software Selegen-REML/BLUP (RESENDE, 2007). The repeatability coefficients were low for NFP (0.3145 and 0.3269 for ITA and CUJ, respectively) and also for SWP (0.2957 and 0.3436 for ITA and CUJ, respectively). It on average takes nine evaluation years to reach coefficients of determination higher than 80%. Permanent phenotypic correlation values higher than 0.95 were obtained for NFP and SWP in both populations. Although trees with a high number of fruits and seed weight were identified, more evaluation years are needed to perform the selection process more efficiently.