Tuning second order cyclostationarity parameters for the diagnostics of rolling element bearings

Failures on rolling element bearings usually originate from cracks that are detectable even in their early stage of propogation by properly analyzing vibration signals measured in the proximity of the bearing. Due to micro-slipping in the roller-races contact, damage-induced vibration signals belong to the family of quasi-periodic signals with a strong second order cyclostationary component. Cyclic coherence and its integrated form are widely considered as the most suitable tools for bearing fault diagnostics and their theoretical bases have been already consolidated. This paper presents how to correctly set the parameters of the cyclostationary analysis tool to be implemented in an automatable algorithm. In the first part of the paper some general guidelines are provided for the specific application. These considerations are further verified, applying cyclostationary tools to data collected in an experimental campaign on a specific test-rig.

Measuring, modelling and understanding the mechanical behavior of bagasse

In the Australian sugar industry, sugar cane is smashed into a straw like material by hammers before being squeezed between large rollers to extract the sugar juice. The straw like material is initially called prepared cane and then bagasse as it passes through successive roller milling units. The sugar cane materials are highly compressible, have high moisture content, are fibrous, and they resemble some peat soils in both appearance and mechanical behaviour. A promising avenue to improve the performance of milling units for increased throughput and juice extraction, and to reduce costs is by modelling of the crushing process. To achieve this, it is believed necessary that milling models should be able to reproduce measured bagasse behaviour. This investigation sought to measure the mechanical (compression, shear, and volume) behaviour of prepared cane and bagasse, to identify limitations in currently used material models, and to progress towards a material model that can predict bagasse behaviour adequately. Tests were carried out using a modified direct shear test equipment and procedure at most of the large range of pressures occurring in the crushing process. The investigation included an assessment of the performance of the direct shear test for measuring bagasse behaviour. The assessment was carried out using finite element modelling. It was shown that prepared cane and bagasse exhibited critical state behavior similar to that of soils and the magnitudes of material parameters were determined. The measurements were used to identify desirable features for a bagasse material model. It was shown that currently used material models had major limitations for reproducing bagasse behaviour. A model from the soil mechanics literature was modified and shown to achieve improved reproduction while using magnitudes of material parameters that better reflected the measured values. Finally, a typical three roller mill pressure feeder configuration was modelled. The predictions and limitations were assessed by comparison to measured data from a sugar factory.

Design and test of a custom instrumented leg press for injury and recovery intervention

There is an increasing desire and emphasis to integrate assessment tools into the everyday training environment of athletes. These tools are intended to fine-tune athlete development, enhance performance and aid in the development of individualised programmes for athletes. The areas of workload monitoring, skill development and injury assessment are expected to benefit from such tools. This paper describes the development of an instrumented leg press and its application to testing leg dominance with a cohort of athletes. The developed instrumented leg press is a 45° reclining sled-type leg press with dual force plates, a displacement sensor and a CCD camera. A custom software client was developed using C#. The software client enabled near-real-time display of forces beneath each limb together with displacement of the quad track roller system and video feedback of the exercise. In recording mode, the collection of athlete particulars is prompted at the start of the exercise, and pre-set thresholds are used subsequently to separate the data into epochs from each exercise repetition. The leg press was evaluated in a controlled study of a cohort of physically active adults who performed a series of leg press exercises. The leg press exercises were undertaken at a set cadence with nominal applied loads of 50%, 100% and 150% of body weight without feedback. A significant asymmetry in loading of the limbs was observed in healthy adults during both the eccentric and concentric phases of the leg press exercise (P < .05). Mean forces were significantly higher beneath the non-dominant limb (4–10%) and during the concentric phase of the muscle action (5%). Given that symmetrical loading is often emphasized during strength training and remains a common goal in sports rehabilitation, these findings highlight the clinical potential for this instrumented leg press system to monitor symmetry in lower-limb loading during progressive strength training and sports rehabilitation protocols.

Large-scale interlaboratory study to develop, analytically validate and apply highly multiplexed, quantitative peptide assays to measure cancer-relevant proteins in plasma

There is an increasing need in biology and clinical medicine to robustly and reliably measure tens-to-hundreds of peptides and proteins in clinical and biological samples with high sensitivity, specificity, reproducibility and repeatability. Previously, we demonstrated that LC-MRM-MS with isotope dilution has suitable performance for quantitative measurements of small numbers of relatively abundant proteins in human plasma, and that the resulting assays can be transferred across laboratories while maintaining high reproducibility and quantitative precision. Here we significantly extend that earlier work, demonstrating that 11 laboratories using 14 LC-MS systems can develop, determine analytical figures of merit, and apply highly multiplexed MRM-MS assays targeting 125 peptides derived from 27 cancer-relevant proteins and 7 control proteins to precisely and reproducibly measure the analytes in human plasma. To ensure consistent generation of high quality data we incorporated a system suitability protocol (SSP) into our experimental design. The SSP enabled real-time monitoring of LC-MRM-MS performance during assay development and implementation, facilitating early detection and correction of chromatographic and instrumental problems. Low to sub-nanogram/mL sensitivity for proteins in plasma was achieved by one-step immunoaffinity depletion of 14 abundant plasma proteins prior to analysis. Median intra- and inter-laboratory reproducibility was <20%, sufficient for most biological studies and candidate protein biomarker verification. Digestion recovery of peptides was assessed and quantitative accuracy improved using heavy isotope labeled versions of the proteins as internal standards. Using the highly multiplexed assay, participating laboratories were able to precisely and reproducibly determine the levels of a series of analytes in blinded samples used to simulate an inter-laboratory clinical study of patient samples. Our study further establishes that LC-MRM-MS using stable isotope dilution, with appropriate attention to analytical validation and appropriate quality c`ontrol measures, enables sensitive, specific, reproducible and quantitative measurements of proteins and peptides in complex biological matrices such as plasma.

Gustaf III inför sina undersåtar : Konsten att härska och politikens kulturhistoria

The dissertation analyses the political culture of Sweden during the reign of King Gustav III (1771-1792). This period commonly referred to as the Gustavian era followed the so-called Age of Liberty ending half a century of strong parliamentary rule in Sweden. The question at the heart of this study engages with the practice of monarchical rule under Gustav III, its ideological origins and power-political objectives as well as its symbolic expression. The study thereby addresses the very nature of kingship. In concrete terms, why did Gustav III, his court, and his civil service vigorously pursue projects that contemporaneous political opponents and, in particular, subsequent historiography have variously pictured as irrelevant, superficial, or as products of pure vanity? The answer, the study argues, is to be found in patterns of political practice as developed and exercised by Gustav III and his administration, which formed a significant part of the political culture of Gustavian Sweden. The dissertation is divided into three parts. The first traces the use and development of royal graces chivalric orders, medals, titles, privileges, and other gifts issued by the king. The practice of royal reward is illustrated through two case studies: the 1772 coup d état that established Gustav III s rule, and the birth and baptism of the crown prince, Gustav Adolf, in 1778. The second part deals with the establishment of the Court of Appeal in Vasa in 1776. The formation of the Appeals Court was accompanied by a host of ceremonial, rhetorical, emblematic, and architectural features solidifying its importance as one of Gustav III s most symbolic administrative reform projects and hence portraying the king as an enlightened monarch par excellence. The third and final part of the thesis engages with war as a cultural phenomenon and focuses on the Russo-Swedish War of 1788-1790. In this study, the war against Russia is primarily seen as an arena for the king and other players to stage, create and re-create as well as articulate themselves through scenes and roles adhering to a particular cultural idiom. Its codes and symbolic forms, then, were communicated by means of theatre, literature, art, history, and classical mythology. The dissertation makes use of a host of sources: protocols, speeches, letters, diaries, newspapers, poetry, art, medals, architecture, inscriptions and registers. Traditional political source material and literary and art sources are studied as totalities, not as separate entities. Also it is argued that political and non-fictional sources cannot be understood properly without acknowledging the context of genre, literary conventions, and artistic modes. The study critically views the futile, but nonetheless almost habitual juxtaposition of the reality of images, ideas, and metaphors, and the reality of supposedly factual historical events. Significantly, the thesis presumes the symbolic dimension to be a constitutive element of reality, not its cooked up misrepresentation. This presumption is reflected in a discussion of the concept of role , which should not be anachronistically understood as roles in which the king cast himself at different times and in different situations. Neither Gustav III nor other European sovereigns of this period played the roles as rulers or majesties. Rather, they were monarchs both in their own eyes and in the eyes of their contemporaries as well as in all relations and contexts. Key words: Eighteenth-Century, Gustav III, Cultural History, Monarchs, Royal Graces, the Vasa Court of Appeal, the Russo-Swedish War 1788–1790.

Aspects of reproduction and diet of the Australian endemic skate Dipturus polyommata (Ogilby) (Elasmobranchii: Rajidae), by-catch of a commercial prawn trawl fishery

The Australian endemic skate Dipturus polyommata collected from by-catch of a benthic prawn fishery off southern Queensland was examined to provide information on reproduction and diet. Morphological relationships of total length (LT) to disc width and LT to mass were estimated. Size at birth was estimated at c. 100-110 mm and size at first feeding at c. 105-110 mm LT. Size at 50% maturity (LT50 and 95% CI) was 321 (305-332) and 300 (285-306) mm LT for females and males, respectively. Size at first maturity corresponded to 87.7% of observed maximum size in females (366 mm LT) and 87.5% in males (343 mm L T). Two females, representing 18.2% of mature females sampled in the austral winter were each carrying two egg cases. Descriptions of egg cases are given. Diet described by the index of relative importance as a percentage (%IRI) was predominantly crustacean based with carid shrimps (53.64%) and penaeoid prawns (23.30%) the most significant prey groups. Teleosts (11.72%), gammarid amphipods (5.31%) and mysids (4.72%) were also important to the diet of the species, while a further six prey groups made only a minor contribution to diet (1.31%). An ontogenetic change was evident between the diets of immature and mature skates. Immature animals fed more extensively on carids and amphipods and mature animals on penaeoids, teleosts and mysids.

Betydelser i barnfamiljsbroschyrer : Systemisk-funktionell analys av den tänkta läsaren och institutionen

This thesis concerns Swedish and Finland-Swedish brochures to families with children, presenting family allowances from the social insurance institutions in the two countries. The aim of the study is to analyse what meanings are conveyed with reference to the conceivable reader and the institution in the brochures. The material consists of information brochures in Swedish from Kela, the social insurance institution of Finland, and Försäkringskassan, the Swedish social insurance agency, issued during 2003–2006. The general theoretical framework is systemic-functional linguistics (SFL) as presented by Halliday & Matthiessen (2004) and Holmberg & Karlsson (2006). The study consists of a quantitative study of the lexical choices of the social insurance brochures. Furthermore, a qualitative process and participant analysis is annotated with the UAM Corpus tool and the results are quantified. Speech functions and modal auxiliaries are analysed qualitatively. The analysis shows that material and relational processes are most common. The relational and verbal processes are used more in the Sweden-Swedish brochures, while the material processes are more common in the Finland-Swedish brochures. The participants in the brochures are the institution, mentioned by its name, and the conceivable reader, directly addressed with “you” (du). In addition, the referent “child” is often mentioned. The participants assigned for the reader are Actor, Receiver, Carrier and Speaker. In the Finland-Swedish texts, the reader is often an Actor, while the reader in the Sweden-Swedish texts is a Carrier. Thus, the conceivable reader is an active participant who takes care of his or her own matters using the internet, communicates actively to the institution and has legal rights and obligations. The institution is visible in the texts but does not have an active role as the name of the institution is mostly used in circumstances. The institution is not often a participant, but when it is, it is Actor, Receiver, Listener and Carrier, expecting the clients to address it. Speech functions are performed in different ways. For instance, questions structure the reading process and commands are realised by modal auxiliaries, not by imperatives. The most common modal auxiliary is kan (can, may), and another common auxiliary is ska (shall, must). Statements are surrounded by subordinate clauses and adverbs that describe situations and criteria. The results of the study suggest that the brochures in the two countries are similar, in particular when produced in similar ways, that is, when the Finland-Swedish texts are not translated. Existing differences reflect the differences in the institutions, the social insurance systems and the cultural contexts. KEYWORDS: Finland-Swedish, Swedish, comparative analysis, SFL, discourse analysis, administrative language, institutional discourse, institutional communication

Konstruktioner och valens : Verbfraser med åt i ett jämförande perspektiv

Det har knappast undgått någon som är språkligt medveten att finlandssvenskan och sverigesvenskan skiljer sig åt till vissa delar. Olikheterna återfinns på olika språkliga nivåer. Mest kända och omskrivna är de lexikologiska skillnaderna, dvs. skillnaderna på ordplanet. Betydligt mindre uppmärksamhet har ägnats syntaktiska skillnader, dvs. skillnader i hur satser och meningar byggs upp. För att öka kunskapen om finlandssvensk syntax initierade Språkvetenskapliga nämnden vid Svenska litteratursällskapet i Finland projektet Svenskan i Finland – syntaktiska drag i ett jämförande perspektiv, som pågick åren 2004–2006. Min avhandling har kommit till inom ramen för det projektet. Prepositionerna (t.ex. av, i, på, för, till, åt osv.) är så kallade funktionsord som har till uppgift att binda samman de mer betydelsetunga orden till satser och meningar. Den finlandssvenska prepositionsanvändningen skiljer sig i viss mån från den sverigesvenska, och ”åt” är en av de prepositioner som ofta lyfts fram som exempel. Finlandssvenskarna säger t.ex. ”han gav en bok åt Lena” i stället för ”han gav en bok till Lena” eller ”han gav Lena en bok”. De säger ”berätta något åt någon” (i stället för ”för”) och de säger ”ringa åt någon” i stället för ”ringa någon”. Ett huvudsyfte med min undersökning är att ta reda på hur pass stora skillnaderna är om man ser till samtliga belägg på ”åt” i ett material och inte bara till sådana som man fäster sig vid för att man vet att de avviker i finlandssvenskan. Undersökningen är korpusbaserad. Det betyder att jag letat efter alla belägg på kombinationer av verb och prepositionen ”åt” i rätt stora textmassor som finns tillgängliga i elektronisk form. Materialet ligger i Språkbanken i Finland och omfattar huvudsakligen tidningstext och skönlitteratur. Jag har använt mig av en textmassa på sammanlagt ungefär 40 miljoner löpande ord, drygt 23 miljoner finlandssvenska och drygt 19 miljoner sverigesvenska. Det materialet gav ca 20 000 åt-belägg att studera, och det visade sig något oväntat att ”åt” inte alls är vanligare i finlandssvenskan än i sverigesvenskan när det gäller skriftspråk, åtminstone inte i professionella skribenters språk. Om man kompenserar för att den finlandssvenska och den sverigesvenska korpusen inte är helt lika i fråga om genrefördelning och ålder, kommer man fram till i stort sett samma frekvens för ”åt” i båda korpusarna. För den närmare analysen av vilka mönster åt-beläggen uppvisar har jag först och främst utnyttjat konstruktionsgrammatik men också ramsemantik och valensteori. Konstruktionsgrammatiken är ingen enhetlig teori, men tanken om grammatiska konstruktioner är gemensam. Konstruktioner representerar allt från generella syntaktiska mönster till specifika mönster för språkliga enskildheter. Uppfattningen om vad som ska inbegripas i begreppet varierar, men definitionen av ”konstruktion” som ”par (eller konstellationer) av form och betydelse” är gemensam. ”Konstruktion” avser aldrig konkreta belägg i texter eller yttranden utan alltid det abstrakta mönstret bakom dessa. Och varje yttrande är resultatet av att en stor mängd konstruktioner samverkar. I min analys har jag utgått ifrån att beläggen med ”åt” kan återföras på olika konstruktioner eller mönster utifrån vad som är gemensamt för grupper av belägg. Jag har sett på vad åt-frasen i samverkan med verbet har för funktion i beläggen. En åt-fras är syntaktiskt en prepositionsfras och består av en preposition och en rektion. Exempelvis utgör ordparet ”åt skogen” en prepositionsfras där ”skogen” är rektion. Ur mitt material har jag kunnat abstrahera fram fem övergripande mönster där referenten för rektionen har olika så kallade semantiska roller. Åt-frasen kan i kombination med verbet ange mål eller riktmärke, som i t.ex. svänga åt höger, dra åt helvete, ta sig åt hjärtat, luta åt en seger för IFK. Den kan för det andra ange mottagare (t.ex. ge varsin kaka åt hundarna, bygga en bastu åt sina svärföräldrar, skaffa biljetter åt en kompis). För det tredje kan åt-frasen avse en referent som har nytta (eller skada) av en aktion (t.ex. klippa häcken åt grannen, ställa in digitalboxen åt sin moster). Åt-frasen kan slutligen avse den eller det som är föremål antingen för en kommunikationsaktion (vinka åt sin son, skratta åt eländet) eller en attityd eller känsla (glädja sig åt framgången). Utöver dessa huvudmönster finns det ett antal smärre grupper av belägg som bildar egna mönster, men de utgör sammanlagt under 3 % i bägge korpusarna. Inom grupperna kan undermönster urskiljas. I t.ex. mottagargruppen representerar ”ge varsin kaka åt hundarna” överföringskonstruktion, ”bygga en bastu åt sina svärföräldrar” produktionskonstruktion och ”skaffa biljetter åt en kompis” ombesörjningskonstruktion. Alla typer är gemensamma för bägge materialen, men andelen belägg som representerar de olika typerna skiljer sig betydligt. I det sverigesvenska materialet står t.ex. det mönster där åt-frasen avser mål eller riktmärke för en mycket större andel av beläggen än i finlandssvenskan. Också andelen belägg där åt-frasen avser någon som har nytta (eller skada) av en aktion är mycket högre i det sverigesvenska materialet. I det finlandssvenska materialet står i gengäld mottagarbeläggen för över 50 % av beläggen medan andelen i det sverigesvenska materialet är bara 30 %. Inom gruppen utgör belägg av produktions- och ombesörjningstyp dessutom en mindre andel i det finlandssvenska materialet än i det sverigesvenska. Dessa står till sin funktion nära den typ som avser den som har nytta av aktionen. De konkreta beläggen på överföring (ge varsin kaka åt hundarna) utgör en större andel i det finlandssvenska materialet än i det sverigesvenska (ca 8 % mot 3 %), men typiskt för båda materialen är hög kollokationsgrad (”kollokation” avser par eller grupper av ord som uppträder oftare tillsammans än de statiskt sett skulle göra vid helt slumpmässig förekomst). Största delen av mottagarbeläggen utgörs av fraser av typen ”ge arbete åt någon, ge eftertryck åt något, ge liv åt något; ägna tid åt något, ägna sitt liv åt något, ägna uppmärksamhet åt något”. De här slutsatserna gäller alltså skriftspråk. I talspråk ser fördelningen annorlunda ut. Typiskt för prepositionen ”åt” är överhuvudtaget hög kollokationsgrad. Det förefaller som om språkanvändarna har tydliga, färdiga mallar för var ”åt” kan komma in. Det enda mönster som verkar helt produktivt, i den meningen att elementen är i stort sett fritt kombinerbara, är kombinationer av verb och åt-fras där åt-frasen avser den som har nytta av något. Att någon utför något för någons räkning verkar överlag kunna uttryckas med prepositionen ”åt”: t.ex. ”tvätta bilen åt pappa, ringa efter en taxi åt kunden”. Till och med belägg av typen ”hon drömde åt honom att bli ordinarie adjunkt” förekommer i någon mån. Konstruktionen är produktiv i båda språkvarieteterna men uppenbart är att konstruktion med mottagare har tolkningsföreträde i vissa fall i finlandssvenskan: ”Filip skrev ett brev åt sin syster” tolkas av sverigesvenskar som att Filip skrev brevet för systerns räkning, medan finlandssvenskar överlag uppenbarligen tolkar det som att Filip skrev till sin syster, att systern var mottagare av brevet. Ungefär 20 % av alla belägg i båda materialen representerar fall där ”åt” utgör partikel. Verb och ”åt” är närmare förbundna med varandra än när ”åt” utgör normal preposition. Exempel på partikelbelägg är ”han kom inte åt strömbrytaren, det gick åt mängder med saft, landet får dra åt svångremmen, de roffade åt sig de bästa platserna”. Också partikelmaterialet ser på ett generellt plan väldigt lika ut i båda språkvarieteterna. Den största skillnaden uppvisar den reflexiva typen ”roffa åt sig”. Medan typen är mycket homogen i det sverigesvenska materialet är variationen större i det finlandsvenska. Dels uppträder fler verb i kombinationen (han köpte åt sig ett par jeans), dels vacklar ordföljden (han nappade åt sig ett paraply ~ han nappade ett paraply åt sig). Att ”åt” används mer i vissa funktioner i finlandsvenskan brukar förklaras med påverkan från finskans allativ (ändelsen -lle: hän antoi kirjan Astalle > hon gav en bok åt Asta). Allt tyder dock på att den finlandssvenska åt-användningen delvis är en relikt. I äldre sverigesvenska källor träffar man på ”åt” i sådana kontexter som numera är typiska för finlandsvenskan. Det finlandssvenska språkområdet ligger ute i periferin i relation till det språkliga centrum som förändringar sprider sig från (för svenskans del främst Stockholmstrakten) och typiskt för perifera områden är att de uppvisar ålderdomliga drag också när inga kontaktfenomen spelar in. Allativen kan naturligtvis ha bidragit till att bevara användningen av ”åt” i finlandssvenskan. Att det är just ”åt” som används” beror antagligen på att prepositionen har flest funktioner gemensamt med allativen rent kognitivt om man jämför med de betydligt mer frekventa prepositionerna ”till” och ”för”. Uppenbart är också att åt-användningen därtill lever sitt eget liv i finlandssvenskan. I vissa varieteter av finlandssvenska kan man t.ex. höra yttranden av typ ”alla fiskarna dog åt dom”. Som språklig enskildhet har det ingen finsk förebild med allativ. Yttrandet är ett exempel på töjning av en svensk konstruktion. Modell finns dels i det mönster där åt avser den som har nytta eller skada av något, dels i relationell användning av ”åt”: han är hantlangare åt Eriksson ~ han är Erikssons hantlangare. Vid språkkontakt är det överlag konstruktioner som har förebild i det låntagande språket som lånas in från det långivande språket, medan konstruktioner som saknar förebild är betydligt mindre benägna att vinna insteg.

Editorial of "International Journal of Critical Indigenous Studies Volume 2, Number 1, 2009"

Over the past two decades neo liberalism has shaped global economic activity. The international reach of the current economic crisis propelled by the subprime mortgage meltdown in the United States has affected Indigenous communities in different ways to those whose investments were depleted by the Wall Street activities of an unregulated corporate and banking sector. Throughout this roller coaster economic ride the low socio-economic position of Indigenous peoples continued in Canada, the United States of America, New Zealand, Hawaii and Australia. The logic, or illogic of capital, failed to extend the boom of the economic upturn to Indigenous peoples, but is poised to extend the repercussions of the current downturn deep into Indigenous lives. The consistency of the Indigenous socio-economic position across these countries, even where treaties exist, indicates that the phenomenon is based on a shared Indigenous reality. In this special edition, the commonality in the way in which Indigenous people are engaged in and positioned by market forces and regulation by their respective nation states is proposed as one of the foundation plates of that Indigenous positioning...

Rapid quenching and glass formation in chalcogenide glasses: Preparation and properties of Ge-As-Te glasses over an extended composition ranges

In Ge-As-Te system, the glass forming region determined by normal melt quenching method has two regions (GFR I and GFR II) separated by few compositions gap. With a simple laboratory built twin roller apparatus, we have succeeded in preparing Ge7.5AsxTe92.5-x glasses over extended composition ranges. A distinct change in T-g is observed at x = 40, exactly at which the separation of the glass forming regions occur indicating the changes in the connectivity and the rigidity of the structural network. The maximum observed in glass transition (T-g) at x = 55 corresponding to the average coordination number (Z(av)) = 2.70 is an evidence for the shift of the rigidity percolation threshold (RPT) from Z(av) = 2.40 as predicted by the recent theories. The glass forming tendency (K-gl) and Delta T (=T-c-T-g) is low for the glasses in the GFR I and high for the glasses in the GFR II.

Stor Anna, Liten Anna och tio andra personporträtt : Om innehållsliga och språkliga mönster i en mediegenres kvinnobeskrivningar

The aim of this licentiate thesis is to analyse how femininity is constructed in twelve portrait interviews of women in the dailies Dagens Nyheter (Stockholm) and Hufvudstadsbladet (Helsinki) in September 1996, and to explore the portrait interview as a media genre. The qualitative analysis has a feminist and constructionist perspective and is connected to critical text analysis. It was carried out on two levels: first, femininity is identified on the linguistic level by choice of words, and second on the level of content (topical motifs/themes). The portrait interview as a genre constitutes a third dimension in the analysis: The aim is not towards the identification of femininity, but rather towards the identification of the portrait interview a relatively unexplored media genre. References (Swedish: omtal) to the principal character (or protagonist) are traced mainly through reference chains which consist of names, pronouns and substantive phrases. The interviewees were referred to by their full names in Dagens Nyheter (with the exception of the oldest and youngest interviewees, both of whom were mainly referred to by their first names), while the style of reference varied more in Hufvudstadsbladet. The position of the principal character was also analysed through her relation in the text to minor characters from her working life and from her private life. These minor characters maintained their subordinate positions in all of the portraits except that of the youngest principal character, in which the subsidiary voices became at least as strong as the voice of the principal character. Three frequently-recurring topical motifs occurred in the portraits: The first involved explanations for the principal character s success divided into three categories, agent, affect and ambition, the second concerned using journeys or trips as symbols for turning points in life, and the third referred to the ambiguity in the contradiction between private (family/other private life) and public (work) life. This ambiguity is connected to the portrait interview as a text type (genre) which features conclusions at the end of portraits, which in turn is characteristic of reportage. However, the analysis showed that the conclusions of the portrait interviews often also included elements of ambiguity. This was evident in the contradictions be14 tween private and public life that arose in the portrait interviews that focused on these two spheres. The portraits that focused on the principal character s public life showed ambiguity on a more general level concerning questions about being a woman and having a profession, and they often ended with a description of some details of her private life. The women in the portraits were all constructed as being successful, in terms of having achieved direct success, reflective success or success in the form of life wisdom. The women of direct success were described as ambitious individuals with no sidetracks on their life paths, while those of reflective success were described as active heroines who had received help from different agents, who could use their affects as enriching ingredients in life, but who in the end had control over their own lives (life stories). The elderly women were constructed as having achieved life wisdom and their portraits were focused upon the past. The portrait interview as a genre is characterised by journalistic freedom (in relation to the more strict news genre), by a now room (Swedish nurum ) where the journalist meets the principal character (usually via spoken dialogue that she or he transforms into written text to be read by a mass-media audience) and by the relatively closed structure of the portrait. The portrait is relatively independent in relation to the news genre and in relation to the context of what has previously been written, what is being written at the time and what will be written in the future the principal character does not need to belong to the newspaper s usual gallery of actors. Furthermore, the principal character is constructed as being independent in relation to the subsidiary characters and other media actors. The conflict is within the principal character herself and within her life story, unlike the news genre in which equal actors are in conflict with each other. The portrait is also independent in relation to the news lifespan; the publishing timetable is not as strict as in the news genre, but is still dependent on the factors initiating the portrait. The enclosures consist of a raw analysis of two of twelve portrait interviews and of copies of all portraits.

Novel features of rapidly quenched melts of Bi2(Ca,Sr) 3Cu2O8+δ

By roller quenching and water quenching melts of Bi2(Ca, Sr)3Cu2O8+δ, glasses have been obtained. These glasses exhibit two glass transitions as well as two crystallization transitions. Microwave absorption studies show the glass to be weakly superconducting at 77 K, probably due to the presence of ultramicrocrystallites. The glass on crystallization at 870 K gives the crystalline n=1 member of the homologous series Bi2(Ca, Sr)n+1CunO 2n+4 and the n=2 member on annealing at 1100 K. The glass route provides a unique means of obtaining the n=2 member of the series. On prolonged annealing of the glass at 1120 K, the n=3 member seems to be formed.

Influence of viscoelastic nature on the intermittent peel-front dynamics of adhesive tape

We investigate the influence of viscoelastic nature of the adhesive on the intermittent peel front dynamics by extending a recently introduced model for peeling of an adhesive tape. As time and rate-dependent deformation of the adhesives are measured in stationary conditions, a crucial step in incorporating the viscoelastic effects applicable to unstable intermittent peel dynamics is the introduction of a dynamization scheme that eliminates the explicit time dependence in terms of dynamical variables. We find contrasting influences of viscoelastic contribution in different regions of tape mass, roller inertia, and pull velocity. As the model acoustic energy dissipated depends on the nature of the peel front and its dynamical evolution, the combined effect of the roller inertia and pull velocity makes the acoustic energy noisier for small tape mass and low-pull velocity while it is burstlike for low-tape mass, intermediate values of the roller inertia and high-pull velocity. The changes are quantified by calculating the largest Lyapunov exponent and analyzing the statistical distributions of the amplitudes and durations of the model acoustic energy signals. Both single and two stage power-law distributions are observed. Scaling relations between the exponents are derived which show that the exponents corresponding to large values of event sizes and durations are completely determined by those for small values. Th scaling relations are found to be satisfied in all cases studied. Interestingly, we find only five types of model acoustic emission signals among multitude of possibilities of the peel front configurations.

Evolution of and preconditions for generation of corrugations on a plane surface in rolling contact

A hard roller under normal load is driven by the flat surface of a soft disc. Corrugations are generated on the disc when certain surface morphological, load, speed and mechanical property-oriented conditions are met. The evolutionary process of corrugation generation and the preconditions necessary for it are investigated morphologically and mechanically for four disc materials: mild steel, brass, PTFE and PMMA.

An efficient hybrid approach for design of automotive wheel bearings

Wheel bearings play a crucial role in the mobility of a vehicle by minimizing motive power loss and providing stability in cornering maneuvers. Detailed engineering analysis of a wheel bearing subsystem under dynamic conditions poses enormous challenges due to the nonlinearity of the problem caused by multiple factional contacts between rotating and stationary parts and difficulties in prediction of dynamic loads that wheels are subject to. Commonly used design methodologies are based on equivalent static analysis of ball or roller bearings in which the latter elements may even be represented with springs. In the present study, an advanced hybrid approach is suggested for realistic dynamic analysis of wheel bearings by combining lumped parameter and finite element modeling techniques. A validated lumped parameter representation serves as an efficient tool for the prediction of radial wheel load due to ground reaction which is then used in detailed finite element analysis that automatically accounts for contact forces in an explicit formulation.