Microbiological quality assessment of sand and water from three selected beaches of South Coast, Sao Paulo State, Brazil

This study aimed to assess the sanitary quality of water, and wet and dry sand from three beaches located in the South Coast region of Sao Paulo State, Brazil, selected taking into account the frequency of tourists and the water quality (good, fair and poor). Thirty-six water samples each of wet and dry sand and seawater were collected monthly over a period of one year and analyzed for fecal indicator bacteria (FIB: thermotolerant coliforms, Escherichia coli, and enterococci), presumptive Staphylococcus aureus, Pseudomonas aeruginosa, Candida albicans and dermatophytes. The results revealed FIB concentrations more elevated in dry sand followed by wet sand and water. P. aeruginosa and presumptive S. aureus were detected with a similar frequency in water and sand samples, but maximum concentrations and geometric means were higher in dry sand. C. albicans was detected only in water samples whereas the dermatophyte Microsporum sp. was isolated exclusively from dry and wet sand samples. This evaluation showed also that the environment had a significant influence on P. aeruginosa but not on presumptive S. aureus concentrations. According to threshold values proposed in the literature for E. coli and enterococci dry sand densities, none of the beaches would be considered of sufficient quality for recreational activities.

Giant cell bone lesions in the craniofacial region: a diagnostic and therapeutic challenge

Background: Giant cell tumors of bone (GCTs) are common in the long bones, but rare in the craniofacial region, with only 1% of cases occurring in the latter. Clinical, radiological, and anatomical diagnosis of this locally aggressive disease, which occurs in response to trauma or neoplastic transformation, poses a major challenge in clinical practice. Methods: The present study describes a series of 4 cases and highlights the main features of the differential diagnosis and treatment of these lesions: GCT, giant cell reparative granuloma (GCRG), and the brown tumor of hyperparathyroidism. Results: GCT presents as a benign neoplasm, most typically affecting the knees, and rarely in the temporal and sphenoid bones. It is radiologically indistinguishable from GCRG due to its lytic, poorly defined appearance. The distinction can only be made microscopically, as the presence of multinucleated giant cells scattered throughout the stroma and the absence of a history of trauma favor a diagnosis of GCT. The brown tumor of hyperparathyroidism occurs with rapid, localized osteoclast activity secondary to the effects of increased parathyroid hormone (PTH) levels; parathyroid examination is indispensable. Conclusion: The diagnosis and treatment of these lesions poses a major challenge due to their similar clinical presentation and radiological appearance. Accurate diagnosis is essential for definition of appropriate management, as complete resection is the goal in GCT and GCRG to avoid recurrence, whereas the brown tumor often yields to treatment of the underlying hyperparathyroidism.

Response of mice connective tissue to intracanal dressings containing chlorhexidine

Substances containing chlorhexidine (CHX) have been studied as intracanal medicaments. The aim of the present study was to characterize the response of mouse subcutaneous connective tissue to CHX-containing medications by conventional optical microscopy. The tissue response was evaluated by implanting polyethylene tubes containing one of the substances evaluated: Calen paste + 0.5% CHX, Calen + 2% CHX, 2% CHX gel, and Calen paste (control). After experimental periods of 7, 21, and 63 days, the implants (n = 10) were removed along with the subcutaneous connective tissue. Tissue samples were subjected to histological processing, and sections were stained with hematoxylin and eosin. Qualitative and quantitative analyses of the number of inflammatory cells, blood vessels, and vascularized areas were performed. Results were analyzed by ANOVA and Tukey tests with the significance level set at 5%. We concluded that Calen + 0.5% CHX led to reparative tissue response in contrast with Calen + 2% CHX and 2% CHX gel, which induced persistent inflammatory response, pointing to the aggressive nature of this mixture. When Calen + 2% CHX and 2% CHX gel were compared, the latter induced more intense inflammatory response. Microsc. Res. Tech., 2012. (C) 2012 Wiley Periodicals, Inc.

In vitro cultivation of canine multipotent mesenchymal stromal cells on collagen membranes treated with hyaluronic acid for cell therapy and tissue regeneration

Support structures for dermal regeneration are composed of biodegradable and bioresorbable polymers, animal skin or tendons, or are bacteria products. The use of such materials is controversial due to their low efficiency. An important area within tissue engineering is the application of multipotent mesenchymal stromal cells (MSCs) to reparative surgery. The combined use of biodegradable membranes with stem cell therapy may lead to promising results for patients undergoing unsuccessful conventional treatments. Thus, the aim of this study was to test the efficacy of using membranes composed of anionic collagen with or without the addition of hyaluronic acid (HA) as a substrate for adhesion and in vitro differentiation of bone marrow-derived canine MSCs. The benefit of basic fibroblast growth factor (bFGF) on the differentiation of cells in culture was also tested. MSCs were collected from dog bone marrow, isolated and grown on collagen scaffolds with or without HA. Cell viability, proliferation rate, and cellular toxicity were analyzed after 7 days. The cultured cells showed uniform growth and morphological characteristics of undifferentiated MSCs, which demonstrated that MSCs successfully adapted to the culture conditions established by collagen scaffolds with or without HA. This demonstrates that such scaffolds are promising for applications to tissue regeneration. bFGF significantly increased the proliferative rate of MSCs by 63% when compared to groups without the addition of the growth factor. However, the addition of bFGF becomes limiting, since it has an inhibitory effect at high concentrations in culture medium.

Materiali Compositi a Matrice Cementizia per i Rinforzi Strutturali

L’utilizzo degli FRP (Fiber Reinforced Polymer) nel campo dell’ingegneria civile riguarda essenzialmente il settore del restauro delle strutture degradate o danneggiate e quello dell’adeguamento statico delle strutture edificate in zona sismica; in questi settori è evidente la difficoltà operativa alla quale si va in contro se si volessero utilizzare tecniche di intervento che sfruttano materiali tradizionali. I motivi per cui è opportuno intervenire con sistemi compositi fibrosi sono: • l’estrema leggerezza del rinforzo, da cui ne deriva un incremento pressoché nullo delle masse sismiche ed allo stesso tempo un considerevole aumento della duttilità strutturale; • messa in opera senza l’ausilio di particolari attrezzature da un numero limitato di operatori, da cui un minore costo della mano d’opera; • posizionamento in tempi brevi e spesso senza interrompere l’esercizio della struttura. Il parametro principale che definisce le caratteristiche di un rinforzo fibroso non è la resistenza a trazione, che risulta essere ben al di sopra dei tassi di lavoro cui sono soggette le fibre, bensì il modulo elastico, di fatti, più tale valore è elevato maggiore sarà il contributo irrigidente che il rinforzo potrà fornire all’elemento strutturale sul quale è applicato. Generalmente per il rinforzo di strutture in c.a. si preferiscono fibre sia con resistenza a trazione medio-alta (>2000 MPa) che con modulo elastico medio-alto (E=170-250 GPa), mentre per il recupero degli edifici in muratura o con struttura in legno si scelgono fibre con modulo di elasticità più basso (E≤80 GPa) tipo quelle aramidiche che meglio si accordano con la rigidezza propria del supporto rinforzato. In questo contesto, ormai ampliamente ben disposto nei confronti dei compositi, si affacciano ora nuove generazioni di rinforzi. A gli ormai “classici” FRP, realizzati con fibre di carbonio o fibre di vetro accoppiate a matrici organiche (resine epossidiche), si affiancano gli FRCM (Fiber Reinforced Cementitious Matrix), i TRM (Textile Reinforced Mortars) e gli SRG (Steel Reinforced Grout) che sfruttano sia le eccezionali proprietà di fibre di nuova concezione come quelle in PBO (Poliparafenilenbenzobisoxazolo), sia un materiale come l’acciaio, che, per quanto comune nel campo dell’edilizia, viene caratterizzato da lavorazioni innovative che ne migliorano le prestazioni meccaniche. Tutte queste nuove tipologie di compositi, nonostante siano state annoverate con nomenclature così differenti, sono però accomunate dell’elemento che ne permette il funzionamento e l’adesione al supporto: la matrice cementizia

Diabete ed ischemia critica degli arti inferiori. Studio del danno della parete arteriosa e del ruolo dell'endotelio circolante nella riparazione tessutale e nella neoangiogenesi

Objectives In diabetic and non diabetic patients with peripheral artery obstructive disease (PAOD), we sought to establish whether the vascular wall damage, the mature circulating endothelium and the "in situ" neoangiogenesis are related with each other. Design In the peripheral blood of diabetic patients suffering critical ischaemia associated with peripheral artery disease, low levels and poor function of circulating endothelial progenitor cells (EPCs) were observed. Moreover, circulating endothelial cells (CECs) have been described in different conditions of vascular injury. In this type of disorders, which are all characterized by endothelial damage, neoangiogenesis plays a key role. Materials In the study we recruited 22 diabetic and 16 non diabetic patients, all of them suffering PAOD and critical ischaemia; healthy subjects and multiorgan donors have also been considered like controls. Methods Histopathologic characterization was performed on arterial tissue samples under a light microscope. Flow cytofluorimetric analysis was used to quantify CECs in peripheral blood samples. "In situ" expression of the Vascular Endothelial Growth Factor (VEGF) and Metalloproteinase 9 (MMP-9) transcripts was quantified in a Real Time-PCR analysis. Circulating VEGF concentration was determined by an ELISA assay. Results Arterial wall from diabetic patients, compared with non diabetic subjects, revealed a higher incidence of serious lesions (60% vs 47%) and a lower number of capillaries (65% vs 87%). Mean number of CECs/ml was significantly increased in all patients, compared to healthy controls (p=0.001). Compared to healthy subjects, VEGF transcripts expression resulted significantly higher in diabetic patients and in all patients (p<0.05) and a similar result was obtained in the MMP-9 transcripts expression. Serum VEGF concentration was significantly increased in PAOD patients correlated with controls (p=0.0431). Conclusions Our study demonstrates that in all patients considered, probably, regressive phenomenons prevail on reparative ones, causing an inesorable and progressive degeneration of the vascular wall, worse by diabetes. The vascular damage can be monitored by determining CECs number and its severity and development are emphasized by the MMP-9 transcripts expression. The "in situ" VEGF increased expression seems to be the evidence of a parietal cells bid to induce local angiogenesis. This reparing mechanism could induce the EPCs mobilitation by means the release of VEGF from the arterial wall. The mechanism, however, is ineffective like demonstrated by the EPCs reduced number and activities observed in patients suffering PAOD and critical ischaemia.

Performance based earthquake engineering: Il metodo P.E.E.R. applicazione su un caso di studio.

L’approccio performance-based nell’Ingegneria sismica è una metodologia di progetto che tiene esplicitamente in conto la performance dell’edificio tra i criteri progettuali. Nell’ambito dei metodi PBEE (Performance-Based Earthquake Engineering) di seconda generazione, quello proposto dal PEER (Pacific Earthquake Engineering Research Center) risulta essere il più diffuso. In esso la performance dell’edificio oggetto di studio viene valutata in termini quantitativi secondo le 3D’s (dollars, deaths, downtime – soldi, decessi, inutilizzo), quantità di notevole interesse per l’utente finale. Il metodo si compone di quattro step, indipendenti tra loro fino alla sintesi finale. Essi sono: l’analisi di pericolosità, l’analisi strutturale, l’analisi di danno, l’analisi delle perdite o di loss. Il risultato finale è la curva di loss, che assegna ad ogni possibile perdita economica conseguente all’evento sismico una probabilità di superamento nell’arco temporale di riferimento. Dopo la presentazione del metodo PEER, si è provveduto ad una sua applicazione su di un caso di studio, nella fattispecie un telaio piano di quattro campate, multipiano, in calcestruzzo armato, costruito secondo le norme del ’92. Per l’analisi di pericolosità si è fatto ricorso alle mappe di pericolosità disponibili sul sito INGV, mentre per l’analisi strutturale si è utilizzato il software open-source OpenSees. Le funzioni di fragilità e quelle di loss sono state sviluppate facendo riferimento alla letteratura scientifica, in particolare il bollettino Fib numero 68 “Probabilistic performance-based seismic design”. In questa sede ci si è concentrati unicamente sulla stima delle perdite economiche, tralasciando le altre due variabili decisionali. Al termine del procedimento si è svolta un’analisi di sensitività per indagare quali parametri influenzino maggiormente la curva di loss. Data la curva di pericolosità, il legame EDP(IM) e la deformazione ultima a collasso risultano essere i più rilevanti sul risultato dell’analisi.

The APSEL4D Monolithic Active Pixel Sensor and its Usage in a Single Electron Interference Experiment

We have realized a Data Acquisition chain for the use and characterization of APSEL4D, a 32 x 128 Monolithic Active Pixel Sensor, developed as a prototype for frontier experiments in high energy particle physics. In particular a transition board was realized for the conversion between the chip and the FPGA voltage levels and for the signal quality enhancing. A Xilinx Spartan-3 FPGA was used for real time data processing, for the chip control and the communication with a Personal Computer through a 2.0 USB port. For this purpose a firmware code, developed in VHDL language, was written. Finally a Graphical User Interface for the online system monitoring, hit display and chip control, based on windows and widgets, was realized developing a C++ code and using Qt and Qwt dedicated libraries. APSEL4D and the full acquisition chain were characterized for the first time with the electron beam of the transmission electron microscope and with 55Fe and 90Sr radioactive sources. In addition, a beam test was performed at the T9 station of the CERN PS, where hadrons of momentum of 12 GeV/c are available. The very high time resolution of APSEL4D (up to 2.5 Mfps, but used at 6 kfps) was fundamental in realizing a single electron Young experiment using nanometric double slits obtained by a FIB technique. On high statistical samples, it was possible to observe the interference and diffractions of single isolated electrons traveling inside a transmission electron microscope. For the first time, the information on the distribution of the arrival time of the single electrons has been extracted.

Differentiation and extracellular matrix interactions of chondrocytes in response to signaling molecules and biomaterials for cartilage repair = Differenzierung und Interaktionen von Chondrozyten mit der extrazellulären Matrix als Reaktion auf Signalmoleküle und Biomaterialien für die Wiederinstandsetzung von Knorpel

Chondrocytes live isolated in the voluminous extracellular matrix of cartilage, which they secrete and is neither vascularized nor innervated. Nutrient and waste exchanges occur through diffusion leading to low oxygen tension around the cells. Consequently even normal cartilage under normal physiological conditions suffers from a poor reparative potential that predisposes to degenerative conditions, such as osteoarthritis of the joints, with significant clinical effects.rnOne of the key challenges in medicine is the structural and functional replacement of lost or damaged tissues. Current therapeutical approaches are to transplant cells, implant bioartificial tissues, and chemically induce regeneration at the site of the injury. None of them reproduces well the biological and biomechanical properties of hyaline cartilage.rnThis thesis investigates the re-differentiation of chondrocytes and the repair of cartilage mediated by signaling molecules, biomaterials, and factors provided in mixed cellular cultures (co-culture systems). As signaling molecules we have applied prostaglandin E2 (PGE2) and bone morphogenetic protein 1 (BMP-1) and we have transfected chondrocytes with BMP-1 expressing vectors. Our biomaterials have been hydrogels of type-I collagen and gelatin-based scaffolds designed to mimic the architecture and biochemistry of native cartilage and provide a suitable three-dimensional environment for the cells. We have brought chondrocytes to interact with osteosarcoma Cal 72 cells or with murine preosteoblastic KS483 cells, either in a cell-to-cell or in a paracrine manner.rnExogenous stimulation with PGE2 or BMP-1 did not improve the differentiation or the proliferation of human articular chondrocytes. BMP-1 induced chondrocytic de-differentiation in a dose-dependent manner. Prostaglandin stimulation from gelatin-based scaffolds (three-dimensional culture) showed a certain degree of chondrocyte re-differentiaton. Murine preosteoblastic KS483 cells had no beneficial effect on human articular chondrocytes jointly cultivated with them in hydrogels of type I collagen. Although the hydrogels provided the chondrocytes with a proper matrix in which the cells adopted their native morphology; additionally, the expression of chondrocytic proteoglycan increased in the co-cultures after two weeks. The co-culture of chondrocytes with osteoblast-like cells (in transwell systems) resulted in suppression of the regular de-differentiation program that passaged chondrocytes undergo when cultured in monolayers. Under these conditions, the extracellular matrix of the chondrocytes, rich in type-II collagen and aggrecan, was not transformed into the extracellular matrix characteristic of de-differentiated human articular chondrocytes, which is rich in type-I collagen and versican.rnThis thesis suggests novel strategies of tissue engineering for clinical attempts to improve cartilage repair. Since implants are prepared in vitro (ex-vivo) by expanding human articular chondrocytes (autologous or allogeneic), we conclude that it will be convenient to provide a proper three-dimensional support to the chondrocytes in culture, to supplement the culture medium with PGE2, and to stimulate chondrocytes with osteoblastic factors by cultivating them with osteoblasts.rn

Atomic-scale characterization of diamond surfaces and fullerene self-assembly

In this thesis, elemental research towards the implantation of a diamond-based molecular quantum computer is presented. The approach followed requires linear alignment of endohedral fullerenes on the diamond C(100) surface in the vicinity of subsurface NV-centers. From this, four fundamental experimental challenges arise: 1) The well-controlled deposition of endohedral fullerenes on a diamond surface. 2) The creation of NV-centers in diamond close to the surface. 3) Preparation and characterization of atomically-flat diamondsurfaces. 4) Assembly of linear chains of endohedral fullerenes. First steps to overcome all these challenges were taken in the framework of this thesis. Therefore, a so-called “pulse injection” technique was implemented and tested in a UHV chamber that was custom-designed for this and further tasks. Pulse injection in principle allows for the deposition of molecules from solution onto a substrate and can therefore be used to deposit molecular species that are not stable to sublimation under UHV conditions, such as the endohedral fullerenes needed for a quantum register. Regarding the targeted creation of NV-centers, FIB experiments were carried out in cooperation with the group of Prof. Schmidt-Kaler (AG Quantum, Physics Department, Johannes Gutenberg-Universität Mainz). As an entry into this challenging task, argon cations were implanted into (111) surface-oriented CaF2 crystals. The resulting implantation spots on the surface were imaged and characterized using AFM. In this context, general relations between the impact of the ions on the surface and their valency or kinetic energy, respectively, could be established. The main part of this thesis, however, is constituted by NCAFM studies on both, bare and hydrogen-terminated diamond C(100) surfaces. In cooperation with the group of Prof. Dujardin (Molecular Nanoscience Group, ISMO, Université de Paris XI), clean and atomically-flat diamond surfaces were prepared by exposure of the substrate to a microwave hydrogen plasma. Subsequently, both surface modifications were imaged in high resolution with NC-AFM. In the process, both hydrogen atoms in the unit cell of the hydrogenated surface were resolved individually, which was not achieved in previous STM studies of this surface. The NC-AFM images also reveal, for the first time, atomic-resolution contrast on the clean, insulating diamond surface and provide real-space experimental evidence for a (2×1) surface reconstruction. With regard to the quantum computing concept, high-resolution NC-AFM imaging was also used to study the adsorption and self-assembly potential of two different kinds of fullerenes (C60 and C60F48) on aforementioned diamond surfaces. In case of the hydrogenated surface, particular attention was paid to the influence of charge transfer doping on the fullerene-substrate interaction and the morphology emerging from self-assembly. Finally, self-assembled C60 islands on the hydrogen-terminated diamond surface were subject to active manipulation by an NC-AFM tip. Two different kinds of tip-induced island growth modes have been induced and were presented. In conclusion, the results obtained provide fundamental informations mandatory for the realization of a molecular quantum computer. In the process it was shown that NC-AFM is, under proper circumstances, a very capable tool for imaging diamond surfaces with highest resolution, surpassing even what has been achieved with STM up to now. Particular attention was paid to the influence of transfer doping on the morphology of fullerenes on the hydrogenated diamond surface, revealing new possibilities for tailoring the self-assembly of molecules that have a high electron affinity.

Gilded bronze conservation: assessment of protective treatments by accelerated ageing and of treatment removal procedures by laser cleaning

In the current study, we analyze the effectiveness of an organosilane compound, 3-mercapto-propyl-tri-methoxy-silane (abbreviated PropS-SH), in the corrosion protection of fire-gilded bronzes. Firstly, the coating was applied on as-gilded bronze. Subsequently, it was also applied on pre-patinated bronze, because the substrate on which protective coatings are applied in real conservation interventions are corroded artifacts (cleaning procedures never remove all the corrosion products). Aiming to obtain results that simulate the situation of real artifacts, a dropping test that simulates outdoor exposure in runoff conditions (unsheltered areas of monuments) was employed in order to prepatinate the gilded bronze samples, which are the substrate for applying the protective coating. The preparation of the samples by applying the protective coating was performed in collaboration with the Corrosion Studies Centre “Aldo Daccò” from Ferrara University. After the artificial exposure cycles the samples underwent investigations through a variety of spectroscopic methods including SEM, Raman, FIB, AAS and color measurements. In order to evaluate the possible removal of the organosilane coating, protected samples were subjected to laser cleaning tests and characterized by SEM/EDS so as to assess the changes in composition and morphology of the treated surfaces. The laser cleaning treatment was performed at the Institute of Applied Physics “Nello Carrara” (CNR Sesto Fiorentino (FI)). The morphology and chemical composition of the samples was observed before and after the operation in order to obtain information about the fluence and type of laser which are best suited to the removal of this type of coating.

In Vitro and In Vivo Validation of Human and Goat Chondrocyte Labeling by Green Fluorescent Protein Lentivirus Transduction

We investigated whether human articular chondrocytes can be labeled efficiently and for long-term with a green fluorescent protein (GFP) lentivirus and whether the viral transduction would influence cell proliferation and tissue-forming capacity. The method was then applied to track goat articular chondrocytes after autologous implantation in cartilage defects. Expression of GFP in transduced chondrocytes was detected cytofluorimetrically and immunohistochemically. Chondrogenic capacity of chondrocytes was assessed by Safranin-O staining, immunostaining for type II collagen, and glycosaminoglycan content. Human articular chondrocytes were efficiently transduced with GFP lentivirus (73.4 +/- 0.5% at passage 1) and maintained the expression of GFP up to 22 weeks of in vitro culture after transduction. Upon implantation in nude mice, 12 weeks after transduction, the percentage of labeled cells (73.6 +/- 3.3%) was similar to the initial one. Importantly, viral transduction of chondrocytes did not affect the cell proliferation rate, chondrogenic differentiation, or tissue-forming capacity, either in vitro or in vivo. Goat articular chondrocytes were also efficiently transduced with GFP lentivirus (78.3 +/- 3.2%) and maintained the expression of GFP in the reparative tissue after orthotopic implantation. This study demonstrates the feasibility of efficient and relatively long-term labeling of human chondrocytes for co-culture on integration studies, and indicates the potential of this stable labeling technique for tracking animal chondrocytes for in cartilage repair studies.

Nanomechanics to drive stem cells in injured tissues: insights from current research and future perspectives

Stem cells reside within tissue, ensuring its natural ability to repair an injury. They are involved in the natural repair of damaged tissue, which encompasses a complex process requiring the modulation of cell survival, extracellular matrix turnover, angiogenesis, and reverse remodeling. To date, the real reparative potential of each tissue is underestimated and noncommittal. The assessment of the biophysical properties of the extracellular environment is an innovative approach to better understand mechanisms underlying stem cell function, and consequently to develop safe and effective therapeutic strategies replacing the loss of tissue. Recent studies have focused on the role played by biomechanical signals that drive stem cell death, differentiation, and paracrinicity in a genetic and/or an epigenetic manner. Mechanical stimuli acting on the shape can influence the biochemistry and gene expression of resident stem cells and, therefore, the magnitude of biological responses that promote the healing of injured tissue. Nanotechnologies have proven to be a revolutionary tool capable of dissecting the cellular mechanosensing apparatus, allowing the intercellular cross-talk to be decoded and enabling the reparative potential of tissue to be enhanced without manipulation of stem cells. This review highlights the most relevant findings of stem cell mechanobiology and presents a fascinating perspective in regenerative medicine.

Fabrication of cone-shaped boron doped diamond and gold nanoelectrodes for AFM-SECM

We demonstrate a reliable microfabrication process for a combined atomic force microscopy (AFM) and scanning electrochemical microscopy (SECM) measurement tool. Integrated cone-shaped sensors with boron doped diamond (BDD) or gold (Au) electrodes were fabricated from commercially available AFM probes. The sensor formation process is based on mature semiconductor processing techniques, including focused ion beam (FIB) machining, and highly selective reactive ion etching (RIE). The fabrication approach preserves the geometry of the original AFM tips resulting in well reproducible nanoscaled sensors. The feasibility and functionality of the fully featured tips are demonstrated by cyclic voltammetry, showing good agreement between the measured and calculated currents of the cone-shaped AFM-SECM electrodes.

Unhealthy alcohol use, HIV infection and risk of liver fibrosis in drug users with hepatitis C

Aim To analyze alcohol use, clinical data and laboratory parameters that may affect FIB-4, an index for measuring liver fibrosis, in HCV-monoinfected and HCV/HIV-coinfected drug users. Patients and Methods Patients admitted for substance abuse treatment between 1994 and 2006 were studied. Socio-demographic data, alcohol and drug use characteristics and clinical variables were obtained through hospital records. Blood samples for biochemistry, liver function tests, CD4 cell count, and serology of HIV and HCV infection were collected at admission. Multivariate linear regression was used to analyze the predictors of FIB-4 increase. Results A total of 472 (83% M, 17% F) patients were eligible. The median age at admission was 31 years (Interquartile range (IQR) 27–35 years), and the median duration of drug use was 10 years (IQR 5.5–15 years). Unhealthy drinking (>50 grams/day) was reported in 32% of the patients. The FIB-4 scores were significantly greater in the HCV/HIV-coinfected patients (1.14, IQR 0.76–1.87) than in the HCV-monoinfected patients (0.75, IQR 0.56–1.11) (p<0.001). In the multivariate analysis, unhealthy drinking (p = 0.034), lower total cholesterol (p = 0.042), serum albumin (p<0.001), higher GGT (p<0.001) and a longer duration of addiction (p = 0.005) were independently associated with higher FIB-4 scores in the HCV-monoinfected drug users. The effect of unhealthy drinking on FIB-4 scores disappeared in the HCV/HIV-coinfected patients, whereas lower serum albumin (p<0.001), a lower CD4 cell count (p = 0.006), higher total bilirubin (p<0.001) and a longer drug addiction duration (p<0.001) were significantly associated with higher FIB-4 values. Conclusions Unhealthy alcohol use in the HCV-monoinfected patients and HIV-related immunodeficiency in the HCV/HIV-coinfected patients are important risk factors associated with liver fibrosis in the respective populations.