1000 resultados para produtividade do solo
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
O manejo adequado do solo e a identificação da época de aplicação de N podem aumentar, significativamente, a produtividade do arroz de terras altas. Neste contexto, objetivou-se, com este trabalho, avaliar a interação do manejo do solo com a época de aplicação de nitrogênio, no desenvolvimento e produtividade da cultura. O delineamento experimental utilizado foi o de blocos ao acaso, em esquema fatorial 5x2, sendo 5 tipos de manejo do solo (arado de aiveca e grade niveladora; grade aradora e grade niveladora; escarificador tipo matabroto; SPD; e Aeromix - equipamento de escarificação superficial) e duas épocas de aplicação de nitrogênio (todo N na base, sendo 45 kg ha-1 de nitrogênio aplicados com adubadora de tração mecânica, 1 dia antes da semeadura do arroz, + 45 kg ha-1 de nitrogênio aplicados no ato da semeadura; e 45 kg ha-1 de nitrogênio aplicados no ato da semeadura + 45 kg ha-1 aplicados no início do perfilhamento das plantas), com 4 repetições. Não houve interação dos fatores, para a variável estande final de plantas. Nos tratamentos onde houve revolvimento de solo com arado de aiveca e grade, observou-se maior produtividade quando o nitrogênio foi parcelado. Quando o nitrogênio foi aplicado todo no plantio, o tratamento com escarificador tipo matabroto apresentou a maior produtividade, diferindo de todos os outros tratamentos. O plantio convencional (aiveca ou grade) apresentou produtividade semelhante ao SPD, quando se aplicou o N todo no plantio.
Resumo:
A identificação de cultivares, para cada tipo de manejo do solo, pode favorecer o aumento da produtividade da cultura do arroz de terras altas. Neste contexto, objetivou-se, com este trabalho, estudar o desempenho de genótipos de arroz de terras altas, em dois sistemas de manejo do solo: preparo convencional (PC) e sistema plantio direto (SPD). O estudo foi desenvolvido no município de Ipameri, GO, em 2008/2009. O delineamento experimental foi em blocos ao acaso, no esquema fatorial 2x8, com dezesseis tratamentos e quatro repetições. O primeiro fator foi o sistema de manejo do solo (PC e SPD) e o segundo cultivares (BRS Curinga, BRS Primavera, BRS Monarca, BRS Pepita, BRS Sertaneja, Carajás, Caiapó e Bonança). As plantas apresentaram-se mais altas no PC do que no SPD. Quanto ao número de perfilhos por planta, verificou-se, também, variabilidade nas cultivares, quanto ao tipo de manejo de solo. Constatou-se que o preparo convencional propiciou maiores produtividades (média de 4.349 kg ha-1 que o sistema plantio direto (média de 3.521 kg ha-1, sendo o número de panículas por mI;e número de grãos por panícula os componentes de produção que mais contribuíram para esta diferença. Todas as cultivares apresentaram diferenças estatísticas entre os dois sistemas de manejo do solo, com exceção da cultivar Caiapó. Nos dois sistemas, Carajás foi a mais produtiva e diferiu, estatisticamente, das cultivares BRS Sertaneja e BRS Primavera.
Resumo:
A distribuição granulométrica do solo exerce grande influência na produtividade vegetal. No ano agrícola de 2002/2003, foram analisados atributos da planta: produtividade de grãos (PG) e da palha (PP) do feijoeiro; e do solo: teores de argila, silte e areia de um Latossolo Vermelho distroférrico sob plantio direto, do Campus Experimental da Faculdade de Engenharia de Ilha Solteira/UNESP, em Selvíria (MS). O objetivo foi analisar a variabilidade dos atributos pesquisados, de forma a caracterizar suas dependências espaciais e as correlações, linear e espacial, entre eles. Foi instalada uma malha experimental para coleta dos dados, com 135 pontos amostrais, distribuídos numa área total de 8.000 m² (160 x 50 m). A variabilidade dos dados foi baixa para o teor de argila, média para os teores de silte e areia e alta para PP e PG. A maioria dos atributos apresentou moderada dependência espacial, com alcance entre 19,8 m (silte) e 103,1 m (areia) e de 29,8 m para a PG. Foi observada evidente correlação espacial entre todos os que apresentaram, dois a dois, os maiores coeficientes de correlação; entretanto, entre aqueles que apresentaram os menores, os dados sugeriram, em alguns casos, também haver concordante correlação espacial.
Resumo:
Em relação aos sistemas de manejo adotados pelo homem, a porosidade total e a densidade do solo são atributos ativamente alterados, refletindo decisivamente sobre a produtividade vegetal agrícola. No ano agrícola de 2005, na Fazenda Bonança, no município de Pereira Barreto, Estado de São Paulo, Brasil, foram analisadas a produtividade de forragem do milho outonal (MSF) no sistema plantio direto irrigado, a porosidade total (PT) e a densidade do solo (DS) em profundidade, em um Latossolo Vermelho distrófico. O objetivo foi estudar a variabilidade e as correlações lineares e espaciais entre os atributos da planta e do solo, visando selecionar um indicador da qualidade física do solo de boa representatividade para produtividade da forragem. Foi instalada a malha geoestatística, para coleta de dados do solo e planta, contendo 125 pontos amostrais, numa área de 2.500 m². Os atributos estudados, além de não terem variado aleatoriamente, apresentaram variabilidade dos dados entre média e baixa e seguiram padrões espaciais bem definidos, com alcance entre 6,8 e 23,7 m. Por sua vez, a correlação linear entre o atributo da planta e os do solo, em razão do elevado número de observações, foi baixa. As observações de melhor correlação com a MSF foram a DS1 e a PT1. Entretanto, do ponto de vista espacial, houve excelente correlação inversa entre a MSF e a DS1, assim como entre a DS1 e a PT1. Nos sítios onde a DS1 aumentou (1,45-1,64 kg dm-3) a MSF variou entre 11.653 e 14.552 kg ha-1; já naqueles onde diminuiu (1,35-1,45 kg dm-3) a MSF, ficou entre 14.552 e 17.450 kg ha-1. Portanto, a densidade global, avaliada na camada de 0-0,10 m (DS1), apresentou-se como satisfatório indicador da qualidade física do solo de Pereira Barreto (SP), quando destinado à produtividade de forragem do milho outonal.
Resumo:
O uso agrícola de resíduos orgânicos, de origem agrícola, urbana ou industrial, é uma interessante alternativa de disposição, permitindo a reciclagem de nutrientes (NPK) nos ecossistemas. Este trabalho avaliou o efeito da aplicação de lodo de esgoto como fonte de N e de vinhaça como fonte de K comparado ao uso de fontes minerais desses nutrientes sobre a produtividade e variáveis agroindustriais da cana-de-açúcar, por dois anos consecutivos (cana-planta e cana-soca). O experimento foi conduzido em Latossolo Vermelho-Amarelo distrófico típico, em Pontal - SP, e a variedade de cana-de-açúcar avaliada foi a SP 81-3250. Utilizou-se de esquema fatorial 3x2x2+1, ou seja, três tipos de resíduos (lodo de esgoto + KCl; vinhaça + uréia, e lodo de esgoto + vinhaça); dois modos de aplicação (na linha de plantio ou em área total); duas doses (100 e 200% do N e K necessários à cultura) e um tratamento adicional com adubação mineral, sendo os tratamentos distribuídos na área em blocos ao acaso, com três repetições. Foram avaliadas a produtividade e as variáveis agroindustriais (°brix, pol no caldo, fibra, pureza, pol na cana, AR e ATR). As produtividades de colmo e de açúcar para cana-planta foram mantidas quando N e K foram fornecidos pelo lodo de esgoto e vinhaça, respectivamente. A cana-soca apresentou maior produtividade de colmo e de açúcar quando foram utilizados os resíduos separadamente, complementados com fontes minerais. Quanto ao modo de aplicação, não foram observadas diferenças significativas para as variáveis analisadas.
Resumo:
A porosidade do solo é de extrema importância à produtividade agrícola, uma vez que, em condições adversas, pode dificultar a penetração das raízes e, consequentemente, limitar o adequado aproveitamento dos nutrientes e da água disponível. Na Fazenda Bonança, em Pereira Barreto - SP, em 2005, foi analisada a produtividade de forragem do milho (MSF), a macroporosidade (MA), a microporosidade (MI) e a porosidade total (PT) de um Latossolo Vermelho distrófico (Acrustox Háplico), sob plantio direto, em três profundidades. O objetivo foi estudar as correlações lineares e espaciais entre os atributos da planta e do solo, na tentativa de selecionar, entre os do solo, um indicador da sua qualidade física de boa representatividade para a produtividade da forragem. Foi instalada a malha geoestatística para a coleta dos dados do solo e da planta, contendo 125 pontos amostrais numa área de 2.500 m². Os atributos estudados apresentaram variabilidade entre baixa e muito alta. Também, seguiram padrões espaciais claramente definidos, com alcances da dependência espacial entre 6,6 e 31,1 m. Apesar da correlação linear simples entre a MSF e a MI na profundidade de 0,10-0,20 m ter sido baixa, foi extremamente significativa. Contudo, do ponto de vista espacial, houve elevada correlação inversa entre tais variáveis. Assim, a MI2 apresentou-se como satisfatório indicador da qualidade física do solo de Pereira Barreto - SP, quando destinado à produtividade de forragem do milho.
Resumo:
The objective of this study was to analyze, using the geoestatistic and a system of classification fuzzy, the fertility of an experimental area with base in chemical attributes of the soil and its relationship with the productivity of the conilon coffee. The study was accomplished in the experimental farm of the INCAPER - ES. The soil samples were collected in the depth of 0 - 0.2 m, being analyzed the attributes: matches, potassium, calcium and magnesium, aluminum, sum of bases, cation exchange capacity (pH 7), and saturation percentage. The data were submitted to a descriptive, exploratory, and geostatistical analysis. A system of fuzzy classification was applied using the attributes described to infer about the fertility of the soil and its relationship with the productivity of the culture. The fertility possibility presented positive spatial relationship with the productivity of the culture, with higher values of this where the possibility of fertile soil is superior.
Resumo:
No-tillage system is an efficient technique in control of soil erosion, when compared with conventional tillage, however, some studies indicate higher compaction under no-tillage, mainly in the surface layer. Strategies that increase the organic matter content, as crop rotation and organic fertilization, can be used to solve the soil compaction. The aim of this study was to evaluate the effect of soil managements (crop succession and crop rotation) and fertilization (organic, mineral and organic-mineral) in the physical properties of the soil, under no-tillage system, from 2006 to 2008. The evaluations were carried out in February 2007, after the summer corn harvest, and in September 2008, after the winter corn harvest. Crop rotation decreased the soil density and soil resistance to penetration and increased the macroporosity and total porosity. The use of organic sources of fertilization did not affect any of the physical attributes of soil. The yield of summer corn was highest in succession crop and mineral fertilization, however, in the winter, there was no difference between the soil managements and among the fertilizations.
Resumo:
The study aimed to evaluate the yield and fruit quality of papaya 'Sunrise Solo' as function of nitrogen and boron fertilization. The experiment had a randomized block design with four replications, two plants per plot with a single border. To make up the treatments, we used the experimental array Plan Puebla III, which set the rates for nitrogen (0.0 to 111.2 - 200 - 288.9 - 400 g plant(-1), and B (0.0 - 0.83 - 1.5 - 2.16 - 3.0 g plant(-1)), in a total of ten treatments. The addition of nitrogen increased the yield, average fruit weight and number of fruits per plant. The nitrogen and boron increased the diameter and length of the fruit, amount of seeds and content of soluble solids. The pH of the pulp decreased linearly with increasing doses of nitrogen and boron. It was observed a significant effect of N rates on the level of vitamin C.
Resumo:
A field experiment was carried out in the Lageado Experimental Farm belonging to the São Paulo State University - UNESP, Campus of Botucatu, SP, in a distrophic Nitosoil in 1997/98. The objective was to compare the effects of magnesium termophosphate; termophosphate + lime; termophosphate + phosphogypsum + sugarcane vinnace application on the chemical characteristics of the soil and on the corn (Zea mays L.) yield cultivated in no-tillage and conventional tillage systems. The Crotalaria juncea was cultivated as mulch-producing to make possible the establishment of the tillage systems. The mean modifications in the soil fertility were due to aplication of the magnesium termophosphate. The differences between the two tillage systems, related to crop productivity, were associated to the smaller N content in the corn leaf in the no-tillage system.
Resumo:
The soil mechanical resistance to penetration (PR) has great influence on vegetative development as the root growth and the crop productivity change in inverse proportion. Thus, the objective of this research was to study correlation between the bean grain productivity and the PR in an Oxisol cultivated for four years in no-tillage system at FEIS/UNESP. The attributes PR and yield were determined in a regular grid with 119 sample points. The PR was determined in the layers of 0-0.05, 0.05-0.10, 0.10-0.15, 0.15-0.20 and 0.25-0.30 m. The results were submitted to procedures of descriptive statistics, linear correlation and geostatistic analysis. The linear correlation between the yield and PR was practically null, as in all soil layers investigated it showed determination coefficients (R2) smaller than 0.03 and not significant. The geostatistic analysis showed moderate structure of spatial dependency for PR in the layers of 0.05-0.10 and 0.10-0.15 m, and strong for yield; however, the conjugate spatial analysis of such attributes showed no correlation, therefore, the spatial variability of PR did not influence the yield.
Resumo:
The objective of this research was to study the effects of five different treatments of grass (Brachiaria decumbens) straw mulch on common beans (Phaseolus vulgaris L.): 0% (0 t.ha-1), 25% (2,25 t.ha-1), 50% (4,5 t.ha-1), 75% (6,75 t. ha-1) and 100% (9,0 t/ha) designed by randomized blocks, with four replicates. The irrigation was applied when minimum soil water potential were reached about - 30kPa. The water management based on tensiometers and soil water characteristic curve. A microsprinkler irrigation system was used. The experiment was set up at the Experimental Station of Embrapa Rice and Bean (Empresa Brasileira de Pesquisa Agropecuária Arroz e Feijão) at Santo Antonio de Goiás, Brazil, in a Dark - Red Latosol soil. The results showed: the bean yield and his components were not affected by treatments, except grain number/pod,. The mulch increased the water use efficiency and, consequently, decreased the number of irrigations when the mulch reached more than 50% straw mulch. The treatment with 100% of mulching presented the largest leaf area index and dry matter accumulation was not affected by mulching.
Resumo:
The aim of this work was to evaluate the effect of soil compaction caused by tractor wheel traffic on the limiting water range (LLWR), shoot growth and levels of compaction and four replications in a completely randomized experimental design. Soil samples with preserved structure were collected in the layers: 0.02-0.05; 0.08-0.11; 0.15-0.18 and 0.22-0.25m to determine macroporosity, microporosity, total porosity, bulk density, resistance to penetration and LLWR. The evaluated corn parameters were: plant and first spike height, steam diameter, number of spikes per plant, plant dry matter, dry matter of 1000 seeds and seed productivity. The soil compaction restricted all corn parameters except the number of spikes per plant and dry matter of 1000 seeds. The LLWR was reduced by the soil resistance to penetration, even in the tilled soil with bulk density of 1.12 Mg m-3. Only the treatment with 11 Mg tractor, repeated four times on the area, demonstrated bulk density above critical bulk density in the LLWR that was 1.37 Mg m-3, where the seed productivity was significantly smaller.
Resumo:
This study was carried out to evaluate the effects of surface application of lime rates on soil chemical attributes and soybean yield in a no-tillage system. It was installed a field experiment in a factorial 2×4, and the factors were: two types of lime (calcitic and dolomitic); four rates (0.0 - 0.5 - 1.0 and 1.5 t ha-1 of CaCO3), in a completely randomized blocks experimental design, with four replications. The experiment was located in Matupá, Mato Grosso State, Brazil, being the work developed between November 2006 and May 2007. The evaluations were chemical attributes in the soil layers (0,0-2,5 cm, 2,5-5,0 cm and 5,0-10,0 cm), and the productive characteristics of soybean. Application of lime increased the soil pH (CaCl 2), the exchangeable Ca and Mg, the effective CEC and the base saturation only in the soil surface layer. The two limes were different only for Ca and Mg values in the first layer of soil, and only for the Mg values in the layer of 2,5-5,0 cm. The surface liming in no-tillage system did not change soybean yield.