Effect of changing data collection parameters on statistical motor unit number estimates

The effect of number of samples and selection of data for analysis on the calculation of surface motor unit potential (SMUP) size in the statistical method of motor unit number estimates (MUNE) was determined in 10 normal subjects and 10 with amyotrophic lateral sclerosis (ALS). We recorded 500 sequential compound muscle action potentials (CMAPs) at three different stable stimulus intensities (10–50% of maximal CMAP). Estimated mean SMUP sizes were calculated using Poisson statistical assumptions from the variance of 500 sequential CMAP obtained at each stimulus intensity. The results with the 500 data points were compared with smaller subsets from the same data set. The results using a range of 50–80% of the 500 data points were compared with the full 500. The effect of restricting analysis to data between 5–20% of the CMAP and to standard deviation limits was also assessed. No differences in mean SMUP size were found with stimulus intensity or use of different ranges of data. Consistency was improved with a greater sample number. Data within 5% of CMAP size gave both increased consistency and reduced mean SMUP size in many subjects, but excluded valid responses present at that stimulus intensity. These changes were more prominent in ALS patients in whom the presence of isolated SMUP responses was a striking difference from normal subjects. Noise, spurious data, and large SMUP limited the Poisson assumptions. When these factors are considered, consistent statistical MUNE can be calculated from a continuous sequence of data points. A 2 to 2.5 SD or 10% window are reasonable methods of limiting data for analysis. Muscle Nerve 27: 320–331, 2003

Auditoria e gestão : um estudo de caso dos trabalhos auditoriais realizados no IFES

Por intermédio deste trabalho, foi possível detectar o acúmulo de recomendações, o que possivelmente possa indicar a presença de falhas na gestão. Dessa forma o objetivo deste trabalho é investigar as causas e propor soluções que contribuam para o atendimento das recomendações pendentes e para a melhoria de tomada de decisões administrativas. Tomou-se como apoio o Relatório de Auditoria Anual de Contas nº 201305863 e forma apresentadas ferramentas que auxiliem a gestão no processo gerencial de tomadas de decisões. O universo pesquisado compõe-se dos gestores do IFES, que vivem a rotina burocrática dessa instituição de ensino, o que possibilita obter uma percepção do inter-relacionamento profissional junto à AUDIN (Auditoria Interna). A coleta de dados foi feita por meio de questionário, tendo foco na percepção dos gestores de como os trabalhos de auditoria são realizados no IFES, e, paralelamente, buscou informações capazes de municiar a AUDIN com ferramentas capazes de melhor auxiliar no assessoramento administrativo. A pesquisa sugere que a Auditoria Interna e os gestores incorporem diversos conhecimentos para se obter um melhor desempenho frente às demandas do controle interno e externo. Foi observado um acúmulo significativo de recomendações, o que indica a presença de possíveis falhas na gestão do referido órgão. Assim sendo, a pesquisa apresentou resultados que posicionam a Auditoria Interna à margem do processo gerencial do IFES.

Bias dependent photocurrent collection in p-i-n a-Si : EVSiC : H heterojunction

A series of large area single layers and heterojunction cells in the assembly glass/ZnO:Al/p (SixC1-x:H)/i (Si:H)/n (SixC1-x:H)/Al (0

Bias-dependent photocurrent collection in p-i-n a-Si : H/SiC : H heterojunction

A series of large area single layers and glass/ZnO:AVp(SixC1-x:H)/i(Si:H)/n(SixC1-x:H)/AI (0 < x < 1) heterojunction cells were produced by plasma-enhanced chemical vapour deposition (PE-CVD) at low temperature. Junction properties, carrier transport and photogeneration are investigated from dark and illuminated current-voltage (J-V) and capacitance-voltage (C-V) characteristics. For the heterojunction cells atypical J-V characteristics under different illumination conditions are observed leading to poor fill factors. High series resistances around 106 Q are also measured. These experimental results were used as a basis for the numerical simulation of the energy band diagram, and the electrical field distribution of the structures. Further comparison with the sensor performance gave satisfactory agreement. Results show that the conduction band offset is the most limiting parameter for the optimal collection of the photogenerated carriers. As the optical gap increases and the conductivity of the doped layers decreases, the transport mechanism changes from a drift to a diffusion-limited process.

Kdd, semma crisp-dm: a parallel overviee

In the last years there has been a huge growth and consolidation of the Data Mining field. Some efforts are being done that seek the establishment of standards in the area. Included on these efforts there can be enumerated SEMMA and CRISP-DM. Both grow as industrial standards and define a set of sequential steps that pretends to guide the implementation of data mining applications. The question of the existence of substantial differences between them and the traditional KDD process arose. In this paper, is pretended to establish a parallel between these and the KDD process as well as an understanding of the similarities between them.

KDD, SEMMA and CRISP-DM: a parallel overview

In the last years there has been a huge growth and consolidation of the Data Mining field. Some efforts are being done that seek the establishment of standards in the area. Included on these efforts there can be enumerated SEMMA and CRISP-DM. Both grow as industrial standards and define a set of sequential steps that pretends to guide the implementation of data mining applications. The question of the existence of substantial differences between them and the traditional KDD process arose. In this paper, is pretended to establish a parallel between these and the KDD process as well as an understanding of the similarities between them.

Participação ocupacional do idoso com deficiência visual: sua percepção

O estudo apresentado visava responder às necessidades emergentes de justificação da intervenção da Terapia Ocupacional na população idosa com deficiência visual. Teve como objectivo explorar as perspectivas dos idosos com deficiência visual na experiência que têm da sua participação ocupacional. Paralelamente a este objectivo procurou-se, também, conhecer as atitudes e comportamentos em relação ao apoio da Terapia Ocupacional. Para estudar estas questões utilizou-se uma metodologia qualitativa, a fenomenologia, que permitiu descrever fielmente a experiência que se pretendia conhecer. A recolha de dados foi feita através de duas sessões de focus groups distintas, onde num dos grupos participaram idosos com deficiência visual que tiveram apoio de Terapia Ocupacional e no outro idosos com deficiência visual que não usufruíram deste apoio. Após a análise do conteúdo resultante dos focus groups emergiram os seguintes temas: impacto da deficiência visual, onde foram englobadas as categorias de implicações psicossociais da deficiência visual e restrições nas actividades e ocupações do idoso com deficiência visual; o segundo tema onde se incluíram as categorias de apoio e atitudes sociais, instituições e recursos acessíveis e estratégias utilizadas; por fim o tema dos benefícios percebidos, do qual fazem parte as categorias, benefícios psicológicos e participação. Estes temas permitiram perceber as perspectivas de participação ocupacional do idoso, após o aparecimento da deficiência visual, bem como conhecer as melhorias ao nível dessa participação após intervenção especializada, destacando-se a relevância da intervenção do terapeuta ocupacional na população idosa com deficiência visual.

Adaptive tool for automatic data collection of real electricity markets

The study of electricity markets operation has been gaining an increasing importance in last years, as result of the new challenges that the electricity markets restructuring produced. This restructuring increased the competitiveness of the market, but with it its complexity. The growing complexity and unpredictability of the market’s evolution consequently increases the decision making difficulty. Therefore, the intervenient entities are forced to rethink their behaviour and market strategies. Currently, lots of information concerning electricity markets is available. These data, concerning innumerous regards of electricity markets operation, is accessible free of charge, and it is essential for understanding and suitably modelling electricity markets. This paper proposes a tool which is able to handle, store and dynamically update data. The development of the proposed tool is expected to be of great importance to improve the comprehension of electricity markets and the interactions among the involved entities.

Online versus postal questionnaires: a comparison between two data collection methods

Objectives : The purpose of this article is to find out differences between surveys using paper and online questionnaires. The author has deep knowledge in the case of questions concerning opinions in the development of survey based research, e.g. the limits of postal and online questionnaires. Methods : In the physician studies carried out in 1995 (doctors graduated in 1982-1991), 2000 (doctors graduated in 1982-1996), 2005 (doctors graduated in 1982-2001), 2011 (doctors graduated in 1977-2006) and 457 family doctors in 2000, were used paper and online questionnaires. The response rates were 64%, 68%, 64%, 49% and 73%, respectively. Results : The results of the physician studies showed that there were differences between methods. These differences were connected with using paper-based questionnaire and online questionnaire and response rate. The online-based survey gave a lower response rate than the postal survey. The major advantages of online survey were short response time; very low financial resource needs and data were directly loaded in the data analysis software, thus saved time and resources associated with the data entry process. Conclusions : The current article helps researchers with planning the study design and choosing of the right data collection method.

Deep ocean species. The little that is known mostly comes from collected specimens. Comment on L.A. Rocha et al. Letter "Specimen collection: An essential tool" (23 May, 344: 814).

Deep Ocean Species. The little that is known mostly comes from collected specimens. L.A. Rocha et al. Letter "Specimen collection: An essential tool" (23 May, 344: 814) brilliantly discuss the importance of specimen collection and present the evolution of collecting since the mid-19th century until our present strict codes and conducts. However, it is also important to emphasize the fact that the vast majority of deep ocean macro-organisms are only known to us because of collection and this is a strong argument that should be present in our actions as scientists. If the deep is considered the least known of Earth’s habitats (1% or so according to recent estimates) then what awesome collection of yet to discover species are still there to be properly described? As the authors point citing (1), something around 86% of species remain unknown. Voucher specimens are fundamental for the reasons pointed out and perhaps the vast depths of the World’s oceans are the best example of that importance. The resumed report of 2010 Census of Marine Life (2) showed that among the millions of specimens collected in both familiar and seldom-explored waters, the Census found more than 6,000 potentially new species and completed formal descriptions of more than 1,200 of them. It also found that a number of rare species are in fact common. Voucher specimens are essential and, again agreeing with L.A. Rocha et al. Letter (see above), the modern approach for collecting will not be a cause for extinctions but instead a valuable tool for knowledge, description and even, as seen above, a way to find out that supposed rare species may not be that rare and even prove to reach abundant populations.

Parallel implementation of vertex component analysis for hyperspectral endmember extraction

International Conference with Peer Review 2012 IEEE International Conference in Geoscience and Remote Sensing Symposium (IGARSS), 22-27 July 2012, Munich, Germany

Real-time scheduling of parallel tasks in the Linux Kernel

This paper proposes a global multiprocessor scheduling algorithm for the Linux kernel that combines the global EDF scheduler with a priority-aware work-stealing load balancing scheme, enabling parallel real-time tasks to be executed on more than one processor at a given time instant. We state that some priority inversion may actually be acceptable, provided it helps reduce contention, communication, synchronisation and coordination between parallel threads, while still guaranteeing the expected system’s predictability. Experimental results demonstrate the low scheduling overhead of the proposed approach comparatively to an existing real-time deadline-oriented scheduling class for the Linux kernel.

Supporting real-time parallel task models with work-stealing

Dynamic parallel scheduling using work-stealing has gained popularity in academia and industry for its good performance, ease of implementation and theoretical bounds on space and time. Cores treat their own double-ended queues (deques) as a stack, pushing and popping threads from the bottom, but treat the deque of another randomly selected busy core as a queue, stealing threads only from the top, whenever they are idle. However, this standard approach cannot be directly applied to real-time systems, where the importance of parallelising tasks is increasing due to the limitations of multiprocessor scheduling theory regarding parallelism. Using one deque per core is obviously a source of priority inversion since high priority tasks may eventually be enqueued after lower priority tasks, possibly leading to deadline misses as in this case the lower priority tasks are the candidates when a stealing operation occurs. Our proposal is to replace the single non-priority deque of work-stealing with ordered per-processor priority deques of ready threads. The scheduling algorithm starts with a single deque per-core, but unlike traditional work-stealing, the total number of deques in the system may now exceed the number of processors. Instead of stealing randomly, cores steal from the highest priority deque.

Parallel real-time support for distributed adaptive embedded applications

Real-time embedded applications require to process large amounts of data within small time windows. Parallelize and distribute workloads adaptively is suitable solution for computational demanding applications. The purpose of the Parallel Real-Time Framework for distributed adaptive embedded systems is to guarantee local and distributed processing of real-time applications. This work identifies some promising research directions for parallel/distributed real-time embedded applications.