The interplay between chondrocyte redifferentiation pellet size and oxygen concentration

Chondrocytes dedifferentiate during ex vivo expansion on 2-dimensional surfaces. Aggregation of the expanded cells into 3-dimensional pellets, in the presence of induction factors, facilitates their redifferentiation and restoration of the chondrogenic phenotype. Typically 1×105–5×105 chondrocytes are aggregated, resulting in “macro” pellets having diameters ranging from 1–2 mm. These macropellets are commonly used to study redifferentiation, and recently macropellets of autologous chondrocytes have been implanted directly into articular cartilage defects to facilitate their repair. However, diffusion of metabolites over the 1–2 mm pellet length-scales is inefficient, resulting in radial tissue heterogeneity. Herein we demonstrate that the aggregation of 2×105 human chondrocytes into micropellets of 166 cells each, rather than into larger single macropellets, enhances chondrogenic redifferentiation. In this study, we describe the development of a cost effective fabrication strategy to manufacture a microwell surface for the large-scale production of micropellets. The thousands of micropellets were manufactured using the microwell platform, which is an array of 360×360 µm microwells cast into polydimethylsiloxane (PDMS), that has been surface modified with an electrostatic multilayer of hyaluronic acid and chitosan to enhance micropellet formation. Such surface modification was essential to prevent chondrocyte spreading on the PDMS. Sulfated glycosaminoglycan (sGAG) production and collagen II gene expression in chondrocyte micropellets increased significantly relative to macropellet controls, and redifferentiation was enhanced in both macro and micropellets with the provision of a hypoxic atmosphere (2% O2). Once micropellet formation had been optimized, we demonstrated that micropellets could be assembled into larger cartilage tissues. Our results indicate that micropellet amalgamation efficiency is inversely related to the time cultured as discreet microtissues. In summary, we describe a micropellet production platform that represents an efficient tool for studying chondrocyte redifferentiation and demonstrate that the micropellets could be assembled into larger tissues, potentially useful in cartilage defect repair.

Sample size considerations and augmentation of computer experiments

Computer Experiments, consisting of a number of runs of a computer model with different inputs, are now common-place in scientific research. Using a simple fire model for illustration some guidelines are given for the size of a computer experiment. A graph is provided relating the error of prediction to the sample size which should be of use when designing computer experiments. Methods for augmenting computer experiments with extra runs are also described and illustrated. The simplest method involves adding one point at a time choosing that point with the maximum prediction variance. Another method that appears to work well is to choose points from a candidate set with maximum determinant of the variance covariance matrix of predictions.

Imagining neighbourhood-based community : an autoethnography

This research is an autoethnographic investigation of consumption experiences, public and quasi-public spaces, and their relationship to community within an inner city neighbourhood. The research specifically focuses on the gentrifying inner city, where class-based processes of change can have implications for people’s abilities to remain within, or feel connected to place. However, the thesis draws on broader theories of the throwntogetherness of the contemporary city (e.g., Amin and Thrift, 2002; Massey 2005) to argue that the city is a space where place-based meanings cannot be seen to be fixed, and are instead better understood as events of place – based on ever shifting interrelations between the trajectories of people and things. This perspective argues the experience of belonging to community is not just born of a social encounter, but also draws on the physical and symbolic elements of the context in which it is situated. The thesis particularly explores the ways people construct identifications within this shifting urban environment. As such, consumption practices and spaces offer one important lens through which to explore the interplay of the physical, social and symbolic. Consumer research tells us that consumption practices can facilitate experiences in which identity-defining meaning can be generated and shared. Consumption spaces can also support different kinds of collective identification – as anchoring realms for specific cultural groups or exposure realms that enable individuals to share in the identification practices of others with limited risk (Aubert-Gamet & Cova, 1999). Furthermore, the consumption-based lifestyles that gentrifying inner city neighbourhoods both support and encourage can also mean that consumption practices may be a key reason that people are moving through public space. That is, consumption practices and spaces may provide a purpose for which – and spatial frame against which – our everyday interactions and connections with people and objects are undertaken within such neighbourhoods. The purpose of this investigation then was to delve into the subjectivities at the heart of identifying with places, using the lens of our consumption-based experiences within them. The enquiry describes individual and collective identifications and emotional connections, and explores how these arise within and through our experiences within public and quasi-public spaces. It then theorises these ‘imaginings’ as representative of an experience of community. To do so, it draws on theories of imagination and its relation to community. Theories of imagined community remind us that both the values and identities of community are held together by projections that create relational links out of objects and shared practices (e.g., Benedict Anderson, 2006; Urry, 2000). Drawing on broader theories of the processes of the imagination, this thesis suggests that an interplay between reflexivity and fantasy – which are products of the critical and the fascinated consciousness – plays a role in this imagining of community (e.g., Brann, 1991; Ricoeur, 1994). This thesis therefore seeks to explore how these processes of imagining are implicated within the construction of an experience of belonging to neighbourhood-based community through consumption practices and the public and quasi-public spaces that frame them. The key question of this thesis is how do an individual’s consumption practices work to construct an imagined presence of neighbourhood-based community? Given the focus on public and quasi-public spaces and our experiences within them, the research also asked how do experiences in the public and quasi-public spaces that frame these practices contribute to the construction of this imagined presence? This investigation of imagining community through consumption practices is based on my own experiences of moving to, and attempting to construct community connections within, an inner city neighbourhood in Melbourne, Australia. To do so, I adopted autoethnographic methodology. This is because autoethnography provides the methodological tools through which one can explore and make visible the subjectivities inherent within the lived experiences of interest to the thesis (Ellis, 2004). I describe imagining community through consumption as an extension of a placebased self. This self is manifest through personal identification in consumption spaces that operate as anchoring realms for specific cultural groups, as well as through a broader imagining of spaces, people, and practices as connected through experiences within realms of exposure. However, this is a process that oscillates through cycles of identification; these anchor one within place personally, but also disrupt those attachments. This instability can force one to question the orientation and motives of these imaginings, and reframe them according to different spaces and reference groups in ways that can also work to construct a more anonymous and, conversely, more achievable collective identification. All the while, the ‘I’ at the heart of this identification is in an ongoing process of negotiation, and similarly, the imagined community is never complete. That is, imagining community is a negotiation, with people and spaces – but mostly with the different identifications of the self. This thesis has been undertaken by publication, and thus the process of imagining community is explored and described through four papers. Of these, the first two focus on specific types of consumption spaces – a bar and a shopping centre – and consider the ways that anchoring and exposure within these spaces support the process of imagining community. The third paper examines the ways that the public and quasi-public spaces that make up the broader neighbourhood context are themselves throwntogether as a realm of exposure, and considers the ways this shapes my imaginings of this neighbourhood as community. The final paper develops a theory of imagined community, as a process of comparison and contrast with imagined others, to provide a summative conceptualisation of the first three papers. The first paper, chapter five, explores this process of comparison and contrast in relation to authenticity, which in itself is a subjective assessment of identity. This chapter was written as a direct response to the recent work of Zukin (2010), and draws on theories of authenticity as applied to personal and collective identification practices by consumer researchers Arnould and Price (2000). In this chapter, I describe how my assessments of the authenticity of my anchoring experiences within one specific consumption space, a neighbourhood bar, are evaluated in comparison to my observations of and affective reactions to the social practices of another group of residents in a different consumption space, the local shopping centre. Chapter five also provides an overview of the key sites and experiences that are considered in more detail in the following two chapters. In chapter six, I again draw on my experiences within the bar introduced in chapter five, this time to explore the process of developing a regular identity within a specific consumption space. Addressing the popular theory of the cafe or bar as third place (Oldenburg, 1999), this paper considers the purpose of developing anchored relationships with people within specific consumption spaces, and explores the different ways this may be achieved in an urban context where the mobilities and lifestyle practices of residents complicate the idea of a consumption space as an anchoring or third place. In doing so, this chapter also considers the manner in which this type of regular identification may be seen to be the beginning of the process of imagining community. In chapter seven, I consider the ways the broader public spaces of the neighbourhood work cumulatively to expose different aspects of its identity by following my everyday movements through the neighbourhood’s shopping centre and main street. Drawing on the theories of Urry (2000), Massey (2005), and Amin (2007, 2008), this chapter describes how these spaces operate as exposure realms, enabling the expression of different senses of the neighbourhood’s spaces, times, cultures, and identities through their physical, social, and symbolic elements. Yet they also enable them to be united: through habitual pathways, group practices of appropriation of space, and memory traces that construct connections between objects and experiences. This chapter describes this as a process of exposure to these different elements. Our imagination begins to expand the scope of the frames onto which it projects an imagined presence; it searches for patterns within the physical, social, and symbolic environment and draws connections between people and practices across spaces. As the final paper, chapter eight, deduces, it is in making these connections that one constructs the objects and shared practices of imagined community. This chapter describes this as an imagining of neighbourhood as a place-based extension of the self, and then explores the ways in which I drew on physical, social, and symbolic elements in an attempt to construct a fit between the neighbourhood’s offerings and my desires for place-based identity definition. This was as a cumulative but fragmented process, in which positive and negative experiences of interaction and identification with people and things were searched for their potential to operate as the objects and shared practices of imagined community. This chapter describes these connections as constructed through interplay between reflexivity and fantasy, as the imagination seeks balance between desires for experiences of belonging, and the complexities of constructing them within the throwntogether context of the contemporary city. The conclusion of the thesis describes the process of imagining community as a reflexive fantasy, that is, as a product of both the critical and fascinated consciousness (Ricoeur, 1994). It suggests that the fascinated consciousness imbues experiences with hope and desire, which the reflexive imagining can turn to disappointment and shame as it critically reflects on the reality of those fascinated projections. At the same time, the reflexive imagination also searches the practices of others for affirmation of those projections, effectively seeking to prove the reality of the fantasy of the imagined community.

Size characterization of airborne SiO2 nanoparticles with on-line and off-line measurement techniques : an interlaboratory comparison study

Results of an interlaboratory comparison on size characterization of SiO2 airborne nanoparticles using on-line and off-line measurement techniques are discussed. This study was performed in the framework of Technical Working Area (TWA) 34—“Properties of Nanoparticle Populations” of the Versailles Project on Advanced Materials and Standards (VAMAS) in the project no. 3 “Techniques for characterizing size distribution of airborne nanoparticles”. Two types of nano-aerosols, consisting of (1) one population of nanoparticles with a mean diameter between 30.3 and 39.0 nm and (2) two populations of non-agglomerated nanoparticles with mean diameters between, respectively, 36.2–46.6 nm and 80.2–89.8 nm, were generated for characterization measurements. Scanning mobility particle size spectrometers (SMPS) were used for on-line measurements of size distributions of the produced nano-aerosols. Transmission electron microscopy, scanning electron microscopy, and atomic force microscopy were used as off-line measurement techniques for nanoparticles characterization. Samples were deposited on appropriate supports such as grids, filters, and mica plates by electrostatic precipitation and a filtration technique using SMPS controlled generation upstream. The results of the main size distribution parameters (mean and mode diameters), obtained from several laboratories, were compared based on metrological approaches including metrological traceability, calibration, and evaluation of the measurement uncertainty. Internationally harmonized measurement procedures for airborne SiO2 nanoparticles characterization are proposed.

Validating SMPS-measured size distribution of double-mode spherical Silica nanoparticles by Transmission Electron Microscope (TEM)

A nanoparticles size is one of their key physical characteristics that can affect their fate in a human’s respiratory tract (in case of inhalation) and also in the environment. Hence, measuring the size distribution of nanoparticles is absolutely essential and contributes greatly to their characterization. For years, Scanning Mobility Particle Sizers (SMPS), which rely on measuring the electrical mobility diameter of particles, have been used as one of the most reliable real-time instruments for the size distribution measurement of nanoparticles. Despite its benefits, this instrument has some drawbacks, including equivalency problems for non-spherical particles (i.e. assuming a non-spherical particle is equal to a spherical particle of diameter d due to the same electrical mobility), as well as limitations in terms of its use in workplaces, because of its large size and the complexity of its operation...

Remote measurement of diesel locomotive emission factors and particle size distributions

A technique for analysing exhaust emission plumes from unmodified locomotives under real world conditions is described and applied to the task of characterizing plumes from railway trains servicing an Australian shipping port. The method utilizes the simultaneous measurement, downwind of the railway line, of the following pollutants; particle number, PM2.5 mass fraction, SO2, NOx and CO2, with the last of these being used as an indicator of fuel combustion. Emission factors are then derived, in terms of number of particles and mass of pollutant emitted per unit mass of fuel consumed. Particle number size distributions are also presented. The practical advantages of the method are discussed including the capacity to routinely collect emission factor data for passing trains and to thereby build up a comprehensive real world database for a wide range of pollutants. Samples from 56 train movements were collected, analyzed and presented. The quantitative results for emission factors are: EF(N)=(1.7±1)×1016 kg-1, EF(PM2.5)= (1.1±0.5) g·kg-1, EF(NOx)= (28±14) g·kg-1, and EF(SO2 )= (1.4±0.4) g·kg-1. The findings are compared with comparable previously published work. Statistically significant (p<α, α=0.05) correlations within the group of locomotives sampled were found between the emission factors for particle number and both SO2 and NOx.

The effect of poser race on the happy categorization advantage depends on stimulus type, set size, and presentation duration

The question as to whether poser race affects the happy categorization advantage, the faster categorization of happy than of negative emotional expressions, has been answered inconsistently. Hugenberg (2005) found the happy categorization advantage only for own race faces whereas faster categorization of angry expressions was evident for other race faces. Kubota and Ito (2007) found a happy categorization advantage for both own race and other race faces. These results have vastly different implications for understanding the influence of race cues on the processing of emotional expressions. The current study replicates the results of both prior studies and indicates that face type (computer-generated vs. photographic), presentation duration, and especially stimulus set size influence the happy categorization advantage as well as the moderating effect of poser race.

Role of particle size and composition in metal adsorption by solids deposited on urban road surfaces

Despite common knowledge that the metal content adsorbed by fine particles is relatively higher compared to coarser particles, the reasons for this phenomenon has gained little research attention. The research study discussed in the paper investigated the variations in metal content for different particle sizes of solids associated with pollutant build-up on urban road surfaces. Data analysis confirmed that parameters favourable for metal adsorption to solids such as specific surface area, organic carbon content, effective cation exchange capacity and clay forming minerals content decrease with the increase in particle size. Furthermore, the mineralogical composition of solids was found to be the governing factor influencing the specific surface area and effective cation exchange capacity. There is high quartz content in particles >150µm compared to particles <150µm. As particle size reduces below 150µm, the clay forming minerals content increases, providing favourable physical and chemical properties that influence adsorption.

Increasing electrospun scaffold pore size with tailored collectors for improved cell penetration

This study investigates the use of patterned collectors to increase the pore size of electrospun scaffolds for enhanced cell infiltration. The morphology of the patterned scaffolds was investigated by scanning electron microscopy, which showed that the collector pattern was accurately mimicked by the electrospun fibres. We observed an enlargement in the pore size and in the pore size distribution compared with conventional electrospinning. Mechanical testing revealed that the mechanical properties could be tailored, to some extent, according to the patterning and that the patterned scaffolds were softer than standard electrospun scaffolds. When NIH 3T3 fibroblasts were seeded onto patterned collectors improved cell infiltration was observed. Cells were able to penetrate up to 250 μm into the scaffolds, compared with 30 μm for the standard scaffolds. This increase in the depth of infiltration occurred as early as 24 h post-seeding and remained constant over 7 days.

Social capital and neighbourhood centres in Queensland : qualitative case studies of three neighbourhood centres

This research paper examines the potential of neighbourhood centres to generate and enhance social capital through their programs, activities, membership associations and community engagement. Social capital is a complex concept involving elements of norms, networks, and trust and is generally seen as enhancing community cohesion and the ability to attain common goals (outlined in more detail in Section 3). The aim of this research project is to describe the nature of social capital formation in terms of development and change in norms, networks and trust within the context of the operations of neighbourhood centres in three Queensland locations (i.e., Sherwood, Kingston/Slacks Creek, and Maleny). The study was prompted by surprisingly little research into how neighbourhood centres and their clients contribute to the development of social capital. Considering the large volume of research on the role of community organisations in building social capital, it is remarkable that perhaps the most obvious organisation with 'social capitalist' intentions has received so little attention (apart from Bullen and Onyx, 2005). Indeed, ostensibly, neighbourhood centres are all about social capital.

Rating for sustainable subdivision neighbourhood design (RSSND) : case of Bangkok metropolitan region (BMR), Thailand an eco-efficiency modelling approach

Bangkok Metropolitan Region (BMR) is the centre for various major activities in Thailand including political, industry, agriculture, and commerce. Consequently, the BMR is the highest and most densely populated area in Thailand. Thus, the demand for houses in the BMR is also the largest, especially in subdivision developments. For these reasons, the subdivision development in the BMR has increased substantially in the past 20 years and generated large numbers of subdivision developments (AREA, 2009; Kridakorn Na Ayutthaya & Tochaiwat, 2010). However, this dramatic growth of subdivision development has caused several problems including unsustainable development, especially for subdivision neighbourhoods, in the BMR. There have been rating tools that encourage the sustainability of neighbourhood design in subdivision development, but they still have practical problems. Such rating tools do not cover the scale of the development entirely; and they concentrate more on the social and environmental conservation aspects, which have not been totally accepted by the developers (Boonprakub, 2011; Tongcumpou & Harvey, 1994). These factors strongly confirm the need for an appropriate rating tool for sustainable subdivision neighbourhood design in the BMR. To improve level of acceptance from all stakeholders in subdivision developments industry, the new rating tool should be developed based on an approach that unites the social, environmental, and economic approaches, such as eco-efficiency principle. Eco-efficiency is the sustainability indicator introduced by the World Business Council for Sustainable Development (WBCSD) since 1992. The eco-efficiency is defined as the ratio of the product or service value according to its environmental impact (Lehni & Pepper, 2000; Sorvari et al., 2009). Eco-efficiency indicator is concerned to the business, while simultaneously, is concerned with to social and the environment impact. This study aims to develop a new rating tool named "Rating for sustainable subdivision neighbourhood design (RSSND)". The RSSND methodology is developed by a combination of literature reviews, field surveys, the eco-efficiency model development, trial-and-error technique, and the tool validation process. All required data has been collected by the field surveys from July to November 2010. The ecoefficiency model is a combination of three different mathematical models; the neighbourhood property price (NPP) model, the neighbourhood development cost (NDC) model, and the neighbourhood occupancy cost (NOC) model which are attributable to the neighbourhood subdivision design. The NPP model is formulated by hedonic price model approach, while the NDC model and NOC model are formulated by the multiple regression analysis approach. The trial-and-error technique is adopted for simplifying the complex mathematic eco-efficiency model to a user-friendly rating tool format. Credibility of the RSSND has been validated by using both rated and non-rated of eight subdivisions. It is expected to meet the requirements of all stakeholders which support the social activities of the residents, maintain the environmental condition of the development and surrounding areas, and meet the economic requirements of the developers.

Effects of size of health service on scope of rural nursing practice

This paper presents the findings of an analysis of the activities of rural nurses from a national audit of the role and function of the rural nurse (Hegney, Pearson and McCarthy 1997). The results suggest that the size of the health service (defined by the number of acute beds) influences the activities of rural nurses. Further, the study reports on the differences of the context of practice between different size rural health services and the impact this has on the scope of rural nursing practice. The paper will conclude that the size of the health service is an outcome of rurality (small population densities, distance from larger health facilities, lack of on-site medical and allied health staff). It also notes that the size of the health service is a major contextual determinant of patient acuity and staff skill-mix in small rural hospitals, and therefore the scope of rural nursing practice.

Dry powder inhaler formulations-effect of polymer carrier size on the drug dispersion

Background The size of the carrier influences the aerosolization of drug from a dry powder inhaler (DPI) formulation. Currently, lactose monohydrate particles in a variety of sizes are preferably used in carrier based DPI formulations of various drugs; however, contradictory reports exist regarding the effect of the size of the carrier on the dispersion of drug. In this study we examined the influence of the intrinsic particle size of the polymeric carrier on the aerosolization of a model drug salbutamol sulphate (SS). Methods Four different sizes (20–150 lm) of polymer carriers were fabricated using solvent evaporation technique and the dispersion of SS particles from these carriers was measured by a Twin Stage Impinger (TSI). The size and morphological properties of polymer carriers were by laser diffraction and SEM, respectively. Results The FPF from these carriers was found to be increasing from 5.6% to 21.3% with increasing the carrier size. The FPF was found to be greater (21%) with the highest particle size of the carrier (150 lm). Conclusions The aerosolization of drug was dependent on the size of polymer carriers. The smaller size of the carrier resulted in lower FPF which was increased with increasing the carrier size. For a fixed mass of drug particles in a formulation, the mass of drug particles per unit area of carriers is higher in formulations containing the larger carriers, which leads to an increase in the dispersion of drug due to the increased mechanical forces occurred between the carriers and the device walls.