Cyclic plastic deformation characteristics of subgrade under moving train wheel load

Cyclic plastic deformation of subgrade and other engineered layers is generally not taken into account in the design of railway bridge transition zones, although the plastic deformation is the governing factor of frequent track deterioration. Actual stress behavior of fine grained subgrade/embankment layers under train traffic is, however, difficult to replicate using the conventional laboratory test apparatus and techniques. A new type of torsional simple shear apparatus, known as multi-ring shear apparatus, was therefore developed to evaluate the actual stress state and the corresponding cyclic plastic deformation characteristics of subgrade materials under moving wheel load conditions. Multi-ring shear test results has been validated using a theoretical model test results; the capability of the multi-ring shear apparatus for replicating the cyclic plastic deformation characteristics of subgrade under moving train wheel load conditions is thus established. This paper describes the effects of principal stress rotation (PSR) of the subgrade materials to the cyclic plastic deformation in a railroad and impacts of testing methods in evaluating the influence of principal stress rotation to the track deterioration of rail track.

Minästä toiseen : Lacanilaisen subjektin syntymä Anaïs Ninin House of Incestissä ja Hélène Cixous'n Dedans'issa

The study approaches two modern novels using the conceptual frame of Lacanian psychoanalysis, especially the Lacanian notion of subject. The novels can be described as subversive “Bildungsromans” (development novels) highly influenced by psychoanalytic thought. Anaïs Nin’s (1903—1977) “poetic novel” House of Incest (1936) is a story of sexual and artistic awakening while Hélène Cixous’s (b. 1937) first novel Dedans (1969) depicts the growth of a little girl whose father dies. Both are first novels and first person narratives. Concentrating in the narrator’s internal life the novels writings break with the realistic conventions of narrative, bringing forth the themes of anguish, alienation from the world and escape into the prison like realm of the self. The study follows roughly the Lacanian process of becoming a subject. Each chapter opens up with a quick introduction to the Lacanian concepts used in the following part that analyses the novels. The study can thus also be used as a brief introduction to Lacanian theory in finnish. The psychoanalytic narrative/story of the birth of the subject and the novels stories can be seen as mirroring each other. The method of the study is thus based on a dialogue between the theoretical concepts and the analyses. Novels are being approached as texts that break with the Cartesian notion of an autonomous subject making room for a dialectics of self and other, for a movement in which the “I” builds an identity mirroring itself with others. While both of the novels recount the birth of a character called I, they also have a first person narrator apart from the character “I”. Having constituted the self’s identity, the narrator finds from inside of the self also an other or “you” – this discovery is the final clue to the coffin of the autonomous self. From the Lacanian perspective man’s great Other is the order of language, Symbolic, which constitutes the individual, the speaking subject. Using this perspective the novels are interpreted as describing the process of becoming a subject of the Symbolic; subjected to Symbolic order. This “birth process” happens in particular in the Imaginary register, where the self’s identity is built. In the Imaginary or Mirror phase the “I” mirrors himself with different others (e.g. with his mirror image and the family members, the surrounding others) learning to see his body and his selfhood both as familiar and strange, other. In the Imaginary phase the novels’ characters are also trying to deal with the opposite realm of the Symcolic, the Real. The Lacanian Real is not the reality “before words” but a reality left over from the Symbolic, aside of it but constituted by the Symbolic, to be deducted only from within it. In the novels the Real is experienced as a womblike state where the self is immersed in the other’s body. The process of coming a subject of the Symbolic is depicted also as a process of renouncing the “dream of the womb”, which, if realized, could only mean the non-existence of the subject, i.e. death. The study concentrates on analysing the novels’ writing, where meanings are constantly changing: “I” becomes you, the father becomes a mother, inside becomes outside. This technique enables also the deconstruction of certain opposing notions in the novels. The Lacanian point of view exposes language as a constantly moving universe where the subject has no more stability than the momentary meanings language creates. The self’s identity depicted in the novels is a Lacanian fixed identity, whose growth is necessary but opposes the flux imminent to the Symbolic. The anguish experienced in the novels, in the “house of incest” or “inside”, is due to clinging on the unchanging “I”. However, the writing of the novels shows how the meaning of the “I” changes constantly and the fixity thus becomes movement. This way House of Incest and Dedans, despite their pessimistic stories, manage to create an image of a new, moving subject.

Characteristics of Alfven surface waves along moving cylindrical plasma columns

The dispersive and stability characteristics of Alfven surface waves (ASW) along the boundary of the moving cylindrical plasma column, surrounded by a stationary medium embedded in a parallel magnetic field is studied. The nature of the symmetric and asymmetric modes on the interface parameters is also discussed.

Moving Up in the New Economy: Career Ladders for U.S. Workers

[Excerpt] This book is about restoring the upward mobility of U.S. workers. Specifically it is about the one workforce-development strategy that is currently aimed at exactly that goal – the strategy of creating (or re-creating) not just jobs but also career ladders. Career-ladder strategies aim to devise explicit pathways of occupational advancement.

The relationship between the determinants of rental housing satisfaction and considering moving in Finland

Purpose The purpose of this paper is to discuss the relation between dissatisfaction with housing conditions and considering moving among residents of Finnish rental multifamily buildings. The paper examines physical attributes, socioeconomic factors, and subjective opinions related to housing conditions and satisfaction with housing. Design/methodology/approach Logistic regression analysis is used to examine survey data to analyse which factors contribute to dissatisfaction with the housing unit and the apartment building and whether dissatisfaction is related to consideration of moving. Findings The findings indicate that dissatisfaction with the building and individual housing unit are associated with greater probability of considering moving. Satisfaction with kitchen, living room, storage, and building age are the most important indicators of satisfaction with the housing unit, and satisfaction with living room, bathroom, storage, and building age are associated with satisfaction with the apartment building. These are the areas in which landlords could invest in renovations to increase satisfaction in an attempt to reduce turnover. Research limitations/implications The study is conducted with Finnish data only. The sample is not a representative sample of the Finnish population. A longitudinal study would be needed to determine whether dissatisfied residents indending to move actually change residence. Originality/value This study is the first of its kind in the Finnish housing market. It tests a general model that has been suggested to be customized to local conditions. In addition, much of the research on this topic is more than 20 years old. Examination of the model under current housing and socioeconomic conditions is necessary to determine if relationships have changed over time.

Brownian particles in stationary and moving traps: The mean and variance of the heat distribution function

A recent theoretical model developed by Imparato et al. Phys of the experimentally measured heat and work effects produced by the thermal fluctuations of single micron-sized polystyrene beads in stationary and moving optical traps has proved to be quite successful in rationalizing the observed experimental data. The model, based on the overdamped Brownian dynamics of a particle in a harmonic potential that moves at a constant speed under a time-dependent force, is used to obtain an approximate expression for the distribution of the heat dissipated by the particle at long times. In this paper, we generalize the above model to consider particle dynamics in the presence of colored noise, without passing to the overdamped limit, as a way of modeling experimental situations in which the fluctuations of the medium exhibit long-lived temporal correlations, of the kind characteristic of polymeric solutions, for instance, or of similar viscoelastic fluids. Although we have not been able to find an expression for the heat distribution itself, we do obtain exact expressions for its mean and variance, both for the static and for the moving trap cases. These moments are valid for arbitrary times and they also hold in the inertial regime, but they reduce exactly to the results of Imparato et al. in appropriate limits. DOI: 10.1103/PhysRevE.80.011118 PACS.

Finite element analysis of moving contact in mechanically fastened joints

The Finite Element Method (FEM) has made a number of otherwise intractable problems solvable. An important aspect for achieving an economical and accurate solution through FEM is matching the formulation and the computational organisation to the problem. This was realised forcefully in the present case of the solution of a class of moving contact boundary value problems of fastener joints. This paper deals with the problem of changing contact at the pin-hole interface of a fastener joint. Due to moving contact, the stresses and displacements are nonlinear with load. This would, in general, need an interactive-incremental approach for solution. However, by posing the problem in an inverse way, a solution is sought for obtaining loads to suit given contact configuration. Numerical results are given for typical isotropic and composite plates with rigid pins. Two cases of loading are considered: (i) load applied only at the edges of the plate and (ii) load applied at the pin and reacted at a part of the edge of the plate. Load-contact relationships, compliance and stress-patterns are investigated. This paper clearly demonstrates the simplification achieved by a suitable formulation of the problem. The results are of significance to the design and analysis of fastener joints.

Moving European research on work and ageing forward: Overview and agenda

This paper summarizes the state of affairs of European research on ageing and work. After a close inspection of the age construct, an overview is presented of research in four areas: the relationship between age and HR-policies, early retirement, age and performance/employability, age and health/well-being. The overview results in a research agenda on work and ageing and in recommendations for practice.

Finite element analysis of moving contact in mechanically fastened joints

The Finite Element Method (FEM) has made a number of otherwise intractable problems solvable. An important aspect for achieving an economical and accurate solution through FEM is matching the formulation and the computational organisation to the problem. This was realised forcefully in the present case of the solution of a class of moving contact boundary value problems of fastener joints. This paper deals with the problem of changing contact at the pin-hole interface of a fastener joint. Due to moving contact, the stresses and displacements are nonlinear with load. This would, in general, need an interactive-incremental approach for solution. However, by posing the problem in an inverse way, a solution is sought for obtaining loads to suit given contact configuration. Numerical results are given for typical isotropic and composite plates with rigid pins. Two cases of loading are considered: (i) load applied only at the edges of the plate and (ii) load applied at the pin and reacted at a part of the edge of the plate. Load-contact relationships, compliance and stress-patterns are investigated. This paper clearly demonstrates the simplification achieved by a suitable formulation of the problem. The results are of significance to the design and analysis of fastener joints.

Demonstration reaches: Looking back whilst moving forward with river rehabilitation under the Native Fish Strategy

‘Demonstration reaches’ are sections of river where multiple threats to native fish are addressed through river rehabilitation and strong community participation. They are an important way of promoting the key driving actions of the Murray-Darling Basin Authority's Native Fish Strategy (NFS) by using on-ground community-driven rehabilitation. Measuring rehabilitation success against well-defined targets and using this information to adaptively mange activities is fundamental to the demonstration reach philosophy. Seven years on from the establishment of the first demonstration reach, there are now seven throughout the Murray-Darling Basin (MDB), all in differing states of maturation and but all applying a standardised framework for monitoring native fish outcomes. In this study, we reflect on the role that demonstration reaches have played within the NFS, synthesise some key findings from 32 monitoring and evaluation outputs, and highlight some of the successes and barriers to success. We make recommendations as to how to strengthen the demonstration reach model to ensure it remains a relevant approach for fish habitat rehabilitation beyond the NFS and MDB.

A moving experience.

Eva Menkin, June 2003

Moving beyond the business plan in enterprise education

Purpose The purpose of this paper is to approach the debate surrounding the role of business plans in enterprise/entrepreneurship education from a different perspective; that of the student. The paper argues that much of the consternation within this stubborn debate derives from a lack of appreciation of the context actually occurring in the lives of our students. The paper aims to explore several arguments directly related to these contexts. Design/methodology/approach The approach is to build around a combining of cycles of reflective practice via the authors' iterative consultation with each other. The paper seeks to explore the world of the student via an enfolding of the literature, but ultimately we do not claim to have hidden our personal biases. Findings It is important to separate enterprise education (EE) from entrepreneurship education when discussing the role of the business plan. While the business plan has a place in the latter, it makes little sense for it to be a focal learning activity in the former. In addition, we see this outcome as a positive outcome for our field with little point in continuing on with what has become a fairly pointless debate. Practical implications: The paper concludes that once EE is viewed as being distinctly different from entrepreneurship education it is free to be considered with more precision what learning needs exist. Focusing on learning needs changes the direction of the discussion, with the business plan only up for discussion if it contributes a learning activity related to pre-determined learning outcomes. Originality/value The paper offers a constructive way forward from a debate that has been beset with extreme vested interests for too long.

Moving from evaluation to trial: How do SMEs start adopting Cloud ERP?

The advent of cloud technology involving low subscription overheads cost has provided small and medium-sized enterprises (SMEs) with the opportunity to adopt new cloud-based corporate-wide systems (i.e., cloud ERP). This technology, operating through subscription-based services, has now provided SMEs with a complete range of IT applications that were once restricted to larger organisations. As anecdotal evidences suggest, SMEs are increasingly adopting cloud-based ERP software. The selection of an ERP is a complex process involving multiple stages and stakeholders, suggesting the importance of closer examination of cloud ERP adoption in SMEs. Yet, prior studies have predominantly treated technology adoption as a single activity and largely ignored the issue of ERP adoption in SMEs. Understanding of the process nature of the adoption and the factors that are important in each stage of the adoption potentially may result in guiding SMEs to make well-informed decisions throughout the ERP selection process. Thus, our study proposes that the adoption of cloud ERP should be examined as a multi-stage process. Using the Theory of Planned Behaviour (TPB) and Ettlie’s adoption stages, as well as employing data gathered from 162 owners of SMEs, our findings show that the factors that influence the intention to adopt cloud ERP vary significantly across adoptive stages.

Discontinuities in an arbitrarily moving gas in special relativity

Singular surface theory and ray theory are used to study the propagation of a weak discontinuity in an arbitrarily moving gas within the framework of special relativity. A differential equation is obtained describing the variation of the strength of the discontinuity along rays.