A Secure Mobile-based Authentication System

Financial information is extremely sensitive. Hence, electronic banking must provide a robust system to authenticate its customers and let them access their data remotely. On the other hand, such system must be usable, affordable, and portable.We propose a challengeresponse based one-time password (OTP) scheme that uses symmetriccryptography in combination with a hardware security module. The proposed protocol safeguards passwords from keyloggers and phishing attacks.Besides, this solution provides convenient mobility for users who want to bank online anytime and anywhere, not just from their owntrusted computers.

Ambient intelligence application based on environmental measurements performed with an assistant mobile robot

This paper proposes the use of an autonomous assistant mobile robot in order to monitor the environmental conditions of a large indoor area and develop an ambient intelligence application. The mobile robot uses single high performance embedded sensors in order to collect and geo-reference environmental information such as ambient temperature, air velocity and orientation and gas concentration. The data collected with the assistant mobile robot is analyzed in order to detect unusual measurements or discrepancies and develop focused corrective ambient actions. This paper shows an example of the measurements performed in a research facility which have enabled the detection and location of an uncomfortable temperature profile inside an office of the research facility. The ambient intelligent application has been developed by performing some localized ambient measurements that have been analyzed in order to propose some ambient actuations to correct the uncomfortable temperature profile.

Secure IP-based Connection Solutions for Mobile Users

Tämä diplomityö tutkii turvallisia etäyhteystapoja yritysverkkoihin. Samanaikasesti kuin Internettiin liitetyt langattomat verkot, kuten langattomat lähiverkot ja pakettikytkentäiset matkapuhelinverkot, tulevat yhä yleisemmiksi, mahdollisuus etäyhteksien luomiseen näiden verkkojen kautta tulee yhä suositummaksi. Vaikka tietoverkot kehittyvät, pysyvät niitä uhkaavat yleisluontoiset uhat samoina. IP pohjaiset VPN-verkot ovat sopiva tapa suojata Internetin ylitse tapahtuvia etäyhteksiä. Eri VPN-ratkaisuja on kuitenkin tarjolla laaja valikoima. Oikean tyyppisen VPN-ratkaisun valinta on kriittistä, jotta yrityksen etäyhteystarpeet saadaan täytettyä. Diplomityö esittelee eräänä vaihtoehtona miten Pocket PC 2002 PDA laitetta ja Windows XP Professional käyttöjärjestelmää voidaan käyttää edullisen VPN ratkaisun toteuttamiseen.

Mobile E-commerce business model – A value web based approach to business models in mobile gaming industry

Tämän tutkimuksen tavoitteena oli tutkia langattomien internet palveluiden arvoverkkoa ja liiketoimintamalleja. Tutkimus oli luonteeltaan kvalitatiivinen ja siinä käytettiin strategiana konstruktiivista case-tutkimusta. Esimerkkipalveluna oli Treasure Hunters matkapuhelinpeli. Tutkimus muodostui teoreettisesta ja empiirisestä osasta. Teoriaosassa liitettiin innovaatio, liiketoimintamallit ja arvoverkko käsitteellisesti toisiinsa, sekä luotiin perusta liiketoimintamallien kehittämiselle. Empiirisessä osassa keskityttiin ensin liiketoimintamallien luomiseen kehitettyjen innovaatioiden pohjalta. Lopuksi pyrittiin määrittämään arvoverkko palvelun toteuttamiseksi. Tutkimusmenetelminä käytettiin innovaatiosessiota, haastatteluja ja lomakekyselyä. Tulosten pohjalta muodostettiin useita liiketoimintakonsepteja sekä kuvaus arvoverkon perusmallista langattomille peleille. Loppupäätelmänä todettiin että langattomat palvelut vaativat toteutuakseen useista toimijoista koostuvan arvoverkon.

Business Model Considerations for Privacy Protection in a Mobile Location Based Context

In this paper we discuss the main privacy issues around mobile business models and we envision new solutions having privacy protection as a main value proposition. We construct a framework to help analyze the situation and assume that a third party is necessary to warrant transactions between mobile users and m-commerce providers. We then use the business model canvas to describe a generic business model pattern for privacy third party services. This pattern is then illustrated in two different variations of a privacy business model, which we call privacy broker and privacy management software. We conclude by giving examples for each business model and by suggesting further directions of investigation

Context-based services for mobile devices

The subject of this master’s thesis was developing a context-based reminder service for mobile devices. Possible sources of context were identified and analyzed. One such source is geographical location obtained via a GPS receiver. These receivers consume a lot of power and techniques and algorithms for reducing power consumptions were proposed and analyzed. The service was implemented as an application on a series 60 mobile phone. The application requirements, user interface and architecture are presented. The end-user experiences are discussed and possible future development and research areas are presented.

Measuring mobile WAP protocol based services

WAP tulee olemaan tulevaisuudessa tärkeässä roolissa, kun etsitään sopivaa tiedonsiirtoprotokollaa uusille mobiilipalveluille. Vaikka WAP jollain tavalla epäonnistui ensimmäisessä tulemisessaan sen suosio varmasti tulevaisuudessa tulee kasvamaan. WAP:in heikko suosio ei johtunut niinkään protokollan tiedonsiirto ominaisuuksista, vaan WAP-palveluiden kehittymättömyydestä. Tulevaisuuden palvelut kuitenkin ovat kehittyneempiä ja WAP:in suosio tulee kasvamaan. Viimeisimpänä WAP:ia käyttävänä palveluna on esitelty MMS. Kun uudet WAP:iin pohjautuvat palvelut yleistyvät, asettaa se uusia vaatimuksia myös WAP gateway:lle. Työssä tarkastellaan erilaisia mahdollisuuksia mitata mobiilisti WAP palvelujen palvelun tasoa. Työssä myös toteutetaan mobiili WAP palveluiden mittauskomponentti, joka toimii osana laajempaa ohjelmistoa. Tarkoituksena on toteuttaa mittauskomponentti, joka emuloi mahdollisimman hyvin todellista loppukäyttäjää.

Optimizing Mobile Java Location-Based Services in Symbian OS

This thesis evaluates methods for obtaining high performance in applications running on the mobile Java platform. Based on the evaluated methods, an optimization was done to a Java extension API running on top the Symbian operating system. The API provides location-based services for mobile Java applications. As a part of this thesis, the JNI implementation in Symbian OS was also benchmarked. A benchmarking tool was implemented in the analysis phase in order to implement extensive performance test set. Based on the benchmark results, it was noted that the landmarks implementation of the API was performing very slowly with large amounts of data. The existing implementation proved to be very inconvenient for optimization because the early implementers did not take performance and design issues into consideration. A completely new architecture was implemented for the API in order to provide scalable landmark initialization and data extraction by using lazy initialization methods. Additionally, runtime memory consumption was also an important part of the optimization. The improvement proved to be very efficient based on the measurements after the optimization. Most of the common API use cases performed extremely well compared to the old implementation. Performance optimization is an important quality attribute of any piece of software especially in embedded mobile devices. Typically, projects get into trouble with performance because there are no clear performance targets and knowledge how to achieve them. Well-known guidelines and performance models help to achieve good overall performance in Java applications and programming interfaces.

Mobile Subscription Acquisition and Retention Costs - An Actvity-Based Model

The objective of this master’s thesis was to develop a model for mobile subscription acquisition cost, SAC, and mobile subscription retention cost, SRC, by applying activity-based cost accounting principles. The thesis was conducted as a case study for a telecommunication company operating on the Finnish telecommunication market. In addition to activity-based cost accounting there were other theories studied and applied in order to establish a theory framework for this thesis. The concepts of acquisition and retention were explored in a broader context with the concepts of customer satisfaction, loyalty and profitability and eventually customer relationship management to understand the background and meaning of the theme of this thesis. The utilization of SAC and SRC information is discussed through the theories of decision making and activity-based management. Also, the present state and future needs of SAC and SRC information usage at the case company as well as the functions of the company were examined by interviewing some members of the company personnel. With the help of these theories and methods it was aimed at finding out both the theory-based and practical factors which affect the structure of the model. During the thesis study it was confirmed that the existing SAC and SRC model of the case company should be used as the basis in developing the activity-based model. As a result the indirect costs of the old model were transformed into activities and the direct costs were continued to be allocated directly to acquisition of new subscriptions and retention of old subscriptions. The refined model will enable managing the subscription acquisition, retention and the related costs better through the activity information. During the interviews it was found out that the SAC and SRC information is also used in performance measurement and operational and strategic planning. SAC and SRC are not fully absorbed costs and it was concluded that the model serves best as a source of indicative cost information. This thesis does not include calculating costs. Instead, the refined model together with both the theory-based and interview findings concerning the utilization of the information produced by the model will serve as a framework for the possible future development aiming at completing the model.

Ambient intelligence application based on environmental measurements performed with an assistant mobile robot

This paper proposes the use of an autonomous assistant mobile robot in order to monitor the environmental conditions of a large indoor area and develop an ambient intelligence application. The mobile robot uses single high performance embedded sensors in order to collect and geo-reference environmental information such as ambient temperature, air velocity and orientation and gas concentration. The data collected with the assistant mobile robot is analyzed in order to detect unusual measurements or discrepancies and develop focused corrective ambient actions. This paper shows an example of the measurements performed in a research facility which have enabled the detection and location of an uncomfortable temperature profile inside an office of the research facility. The ambient intelligent application has been developed by performing some localized ambient measurements that have been analyzed in order to propose some ambient actuations to correct the uncomfortable temperature profile.

Novel virtual environment and real-time simulation based methods for improving life-cycle efficiency of non-road mobile machinery

Virtual environments and real-time simulators (VERS) are becoming more and more important tools in research and development (R&D) process of non-road mobile machinery (NRMM). The virtual prototyping techniques enable faster and more cost-efficient development of machines compared to use of real life prototypes. High energy efficiency has become an important topic in the world of NRMM because of environmental and economic demands. The objective of this thesis is to develop VERS based methods for research and development of NRMM. A process using VERS for assessing effects of human operators on the life-cycle efficiency of NRMM was developed. Human in the loop simulations are ran using an underground mining loader to study the developed process. The simulations were ran in the virtual environment of the Laboratory of Intelligent Machines of Lappeenranta University of Technology. A physically adequate real-time simulation model of NRMM was shown to be reliable and cost effective in testing of hardware components by the means of hardware-in-the-loop (HIL) simulations. A control interface connecting integrated electro-hydraulic energy converter (IEHEC) with virtual simulation model of log crane was developed. IEHEC consists of a hydraulic pump-motor and an integrated electrical permanent magnet synchronous motorgenerator. The results show that state of the art real-time NRMM simulators are capable to solve factors related to energy consumption and productivity of the NRMM. A significant variation between the test drivers is found. The results show that VERS can be used for assessing human effects on the life-cycle efficiency of NRMM. HIL simulation responses compared to that achieved with conventional simulation method demonstrate the advances and drawbacks of various possible interfaces between the simulator and hardware part of the system under study. Novel ideas for arranging the interface are successfully tested and compared with the more traditional one. The proposed process for assessing the effects of operators on the life-cycle efficiency will be applied for wider group of operators in the future. Driving styles of the operators can be analysed statistically from sufficient large result data. The statistical analysis can find the most life-cycle efficient driving style for the specific environment and machinery. The proposed control interface for HIL simulation need to be further studied. The robustness and the adaptation of the interface in different situations must be verified. The future work will also include studying the suitability of the IEHEC for different working machines using the proposed HIL simulation method.

Towards Evaluating and Modelling the Impacts of Mobile-Based Augmented Reality Applications on Learning and Engagement

Mobile augmented reality applications are increasingly utilized as a medium for enhancing learning and engagement in history education. Although these digital devices facilitate learning through immersive and appealing experiences, their design should be driven by theories of learning and instruction. We provide an overview of an evidence-based approach to optimize the development of mobile augmented reality applications that teaches students about history. Our research aims to evaluate and model the impacts of design parameters towards learning and engagement. The research program is interdisciplinary in that we apply techniques derived from design-based experiments and educational data mining. We outline the methodological and analytical techniques as well as discuss the implications of the anticipated findings.

Towards Evaluating and Modelling the Impacts of Mobile-Based Augmented Reality Applications on Learning and Engagement

Mobile augmented reality applications are increasingly utilized as a medium for enhancing learning and engagement in history education. Although these digital devices facilitate learning through immersive and appealing experiences, their design should be driven by theories of learning and instruction. We provide an overview of an evidence-based approach to optimize the development of mobile augmented reality applications that teaches students about history. Our research aims to evaluate and model the impacts of design parameters towards learning and engagement. The research program is interdisciplinary in that we apply techniques derived from design-based experiments and educational data mining. We outline the methodological and analytical techniques as well as discuss the implications of the anticipated findings.

A Beacon based Localization System for Autonomous Mobile Robots and its Applications in Traffic and Transport Control

ACCURATE sensing of vehicle position and attitude is still a very challenging problem in many mobile robot applications. The mobile robot vehicle applications must have some means of estimating where they are and in which direction they are heading. Many existing indoor positioning systems are limited in workspace and robustness because they require clear lines-of-sight or do not provide absolute, driftfree measurements.The research work presented in this dissertation provides a new approach to position and attitude sensing system designed specifically to meet the challenges of operation in a realistic, cluttered indoor environment, such as that of an office building, hospital, industrial or warehouse. This is accomplished by an innovative assembly of infrared LED source that restricts the spreading of the light intensity distribution confined to a sheet of light and is encoded with localization and traffic information. This Digital Infrared Sheet of Light Beacon (DISLiB) developed for mobile robot is a high resolution absolute localization system which is simple, fast, accurate and robust, without much of computational burden or significant processing. Most of the available beacon's performance in corridors and narrow passages are not satisfactory, whereas the performance of DISLiB is very encouraging in such situations. This research overcomes most of the inherent limitations of existing systems.The work further examines the odometric localization errors caused by over count readings of an optical encoder based odometric system in a mobile robot due to wheel-slippage and terrain irregularities. A simple and efficient method is investigated and realized using an FPGA for reducing the errors. The detection and correction is based on redundant encoder measurements. The method suggested relies on the fact that the wheel slippage or terrain irregularities cause more count readings from the encoder than what corresponds to the actual distance travelled by the vehicle.The application of encoded Digital Infrared Sheet of Light Beacon (DISLiB) system can be extended to intelligent control of the public transportation system. The system is capable of receiving traffic status input through a GSM (Global System Mobile) modem. The vehicles have infrared receivers and processors capable of decoding the information, and generating the audio and video messages to assist the driver. The thesis further examines the usefulness of the technique to assist the movement of differently-able (blind) persons in indoor or outdoor premises of his residence.The work addressed in this thesis suggests a new way forward in the development of autonomous robotics and guidance systems. However, this work can be easily extended to many other challenging domains, as well.