Kunnossapitomittariston määrittäminen ja kunnossapidon kehittäminen

Diplomityössä pyritään määrittämään Kaukaan sahan kunnossapidon vallitsevaan tilanteeseen sopiva mittaristo. Tavoitteena on kunnossapitoprosessien tehostaminen sekä sahan kokonaistehokkuuden nostaminen. Diplomityön kirjallisessa osassa tutkimusongelmaa käsitellään kunnossapidon sekä mittaristojen ja tunnuslukujen näkökulmasta. Teoriaosa on rakennettu tukemaan työn tutkimusosaa. Tutkimuksen empiirisessä osassa tehdään nykytila-analyysi Kaukaan sahan kunnossapidosta. Nykytila-analyysi koostuu kyselytutkimuksesta, mitattavista tunnusluvuista sekä top-analyysista. Kyselytutkimus tehtiin lisäksi kaikilla UPM-Kymmene Oyj:n sahoilla. Kyselytutkimuksen pohjalta tehdään benchmarking-analyysia Kaukaan sahan ja suomen teollisuuden sekä UPM:n sahojen välillä. Lopuksi eroanalyysilla analysoidaan kyselytutkimuksessa syntynyttä eroa Kaukaan sahan ja UPM:n sahateollisuuden parhaan kunnossapidon välillä. Tutkimustulokset paljastivat useita kehityskohteita. Työssä annetaan suositus kyseisten kehityskohteiden mittaamisesta. Mittareiden ohella annetaan suosituksia uusista toimintamalleista.

The Process of Greening Cycle as Method of Operative Environmental

The structural change of society from product-based business to service- and further to need-based business has caused the fact that work for environmental issues has spread from conventional factories and environmentally harmful production to concern services and offices as well. Almost every company has an office, so a relatively small environmental burden caused by an individual office grows remarkable already at the state level and globally even more. Motivation to work for environmental issues in an individual office could be challenging even without the fact that wasted environmental impacts bound also wasted costs. Besides cost savings, a concretely greener image of a company has its value in the B2Cas well as in the B2B-field. Consumers and clients are more and more conscious of environmental issues and demand concrete actions instead of speeches, good thoughts and meaningless certifications. Internal work for environmental issues at a strategy level is not sufficient, so operational environmental management is needed for changing old practices. This research is about the effects of operative environmental management on the greening process of an office-based business. The research is outlined to concern the operative work in the office including field sales. Target was to concretely lower the environmental impacts of Lyreco Finland and to find cost savings directly by changing the operative practices in the office and also indirectly by affecting the level of environmental knowledge of the personnel. During the greening process, the aim was also to create concrete arguments for marketing as well. The circle of greening process, which was especially created for this diploma work, was used as a method. The circle divides a year to themes and sections separated by factors of environmental impacts. Separation is based on Brett Wills’ thoughts of seven green wastes (Wills, Brett. The Green Intensions. 2009) and follows it uneasily. The circle aimed at ensuring evolutionary growth of knowledge instead of being revolutionary in the changing process. Committing personnel to the process from its start by asking ideas from them and giving them clear directions was an important part of the research of operative management. Because of working from distance, communication with personnel was operated by frequent training days and weekly greening notes via emails and intranet. Also availability for communication was an important task because of the telecommuting. Research results of this work show that operative environmental management in an officebased business today is mostly management of change. When the strategic environmental friendliness is taken into a concrete level, the most important individual factor is motivating the operating personnel. Research shows that evolutionary change is found being an efficient way to make a change. Also understanding one´s own impact on the environmental burden and on the whole greening process clearly motivates the personnel. Results show that in the operative realization of the greening process, clear directions of new working practices, being as concrete as possible, and committing personnel to follow them make the process more effective. The operative environmental management and the cycle of the greening process decrease the environmental burden and save costs. The concrete results could be used as believable arguments in marketing and therefore exploited in communication with interest groups. Commitment of the management is also one of the key factors of success in the greening process. In this research, changes in the business field by a company trade took the focus of the management away from the greening process and made the process more inefficient by decreasing the amount of training days. The circle of greening process will be used as a tool in the future, as well, and therefore it will help observe environmental impacts of a company and increase sustainable development. Commitment of management to the evolutionary environmental work helps the operating personnel lower environmental impacts, decrease costs and build a concretely greener image.

Developing a Brand Positioning Model for International Strategic Marketing

The target of this thesis is to develop a brand positioning process model for the case company’s international operations. The model will make the process more effective and decrease the risk of relevant aspects being forgotten. The focus is on the international operations although generally the brand positioning can be seen as a standardized subject and, thus, there is no need to distinguish market areas. Constructive research approach is chosen as a research method. Internal interviews are done in order to give the much needed insight about the case company’s current processes and circumstances. Based on theory, interviews as well as internal and external material the model is built. The most difficult part in building the model is to determine the order of each phase. Also, deciding the number of each phase can be problematic. The model should be brief and assertive in order to reduce the risk of misunderstanding between employees from different units. Based on the analysis of the interviews and the theory the brand positioning process model is presented with indication of the order of each phase. The model is divided to three main groups: Analyzing the Environment, Determining the Brand Position, and Documenting the BPS. The benefits of the model are that overlapping work can be reduced, too similar brands can be noticed and it is easier to train new employees.

Pose Determination of a Grasped Object Using Limited Sensing

This report explores methods for determining the pose of a grasped object using only limited sensor information. The problem of pose determination is to find the position of an object relative to the hand. The information is useful when grasped objects are being manipulated. The problem is hard because of the large space of grasp configurations and the large amount of uncertainty inherent in dexterous hand control. By studying limited sensing approaches, the problem's inherent constraints can be better understood. This understanding helps to show how additional sensor data can be used to make recognition methods more effective and robust.

Processes of feelings in a society with a violent past : A qualitative study of the communication for Societal healing in the Truth Commissions in East Timor, Sri Lanka and Ghana between 2002-2011

The research investigates in what extent and how communication for meeting feelings is provided in Truth Commission work. It examines if and in what way feelings are addressed in the communication officially published by the Truth Commissions in East Timor, Ghana and Sri Lanka, occurring between 2002-2011. The research is also looking at the healing processes in a time perspective to find out if there is a communication for Societal healing to be continued in a longer term. My conclusion is that two cases of three in my research, the TRCs in Ghana and East Timor, have communication clearly directed to meet feelings caused by the war. One of the three cases (East Timor) has a communication with a clear ambition to heal over a longer period, to continue after the existence of the Truth Commission. The research suggests that communication with a clear ambition to reach out widely in the society, a communication directed to meet and process feelings over a longer period, can make Societal healing more effective. It also concludes that, in the future, Societal healing, as a field in conflict resolution, will be more based on representational media than today, provided through web communication.

Efeitos da exposição a queima de biomassa na função pulmonar e transportabilidade mucociliar e investigação de doenças ocupacionais dos trabalhadores rurais do setor canavieiro

Pós-graduação em Fisioterapia - FCT

The global financial crisis: what happened and what’s next

Global economic conditions have been deteriorating sharply since mid- September 2008. Lending has dropped abruptly, credit spreads have widened sharply, stock markets have plunged and economies everywhere are stumbling. Governments around the world have undertaken unprecedented measures, including some coordinated intervention. However, global economic prospects remain troubled, and further policy action is required. In order to better understand the task before policy makers as they chart a new direction, this paper examines how the global economy arrived at its current predicament, looking back at the sequence of events that contributed to create havoc in financial markets, as well as the policy response they produced. In light of these events, we examine the impact on Latin American financial markets in particular. The global nature of the current crisis underscores the need for coordinating the policy response at the global level, as well as advancing towards a new international financial architecture that will make possible a more effective response to the build-up of systemic pressures.

Tecniche per il controllo dinamico del consumo di potenza per piattaforme system-on-chip

Providing support for multimedia applications on low-power mobile devices remains a significant research challenge. This is primarily due to two reasons: • Portable mobile devices have modest sizes and weights, and therefore inadequate resources, low CPU processing power, reduced display capabilities, limited memory and battery lifetimes as compared to desktop and laptop systems. • On the other hand, multimedia applications tend to have distinctive QoS and processing requirementswhichmake themextremely resource-demanding. This innate conflict introduces key research challenges in the design of multimedia applications and device-level power optimization. Energy efficiency in this kind of platforms can be achieved only via a synergistic hardware and software approach. In fact, while System-on-Chips are more and more programmable thus providing functional flexibility, hardwareonly power reduction techniques cannot maintain consumption under acceptable bounds. It is well understood both in research and industry that system configuration andmanagement cannot be controlled efficiently only relying on low-level firmware and hardware drivers. In fact, at this level there is lack of information about user application activity and consequently about the impact of power management decision on QoS. Even though operating system support and integration is a requirement for effective performance and energy management, more effective and QoSsensitive power management is possible if power awareness and hardware configuration control strategies are tightly integratedwith domain-specificmiddleware services. The main objective of this PhD research has been the exploration and the integration of amiddleware-centric energymanagement with applications and operating-system. We choose to focus on the CPU-memory and the video subsystems, since they are the most power-hungry components of an embedded system. A second main objective has been the definition and implementation of software facilities (like toolkits, API, and run-time engines) in order to improve programmability and performance efficiency of such platforms. Enhancing energy efficiency and programmability ofmodernMulti-Processor System-on-Chips (MPSoCs) Consumer applications are characterized by tight time-to-market constraints and extreme cost sensitivity. The software that runs on modern embedded systems must be high performance, real time, and even more important low power. Although much progress has been made on these problems, much remains to be done. Multi-processor System-on-Chip (MPSoC) are increasingly popular platforms for high performance embedded applications. This leads to interesting challenges in software development since efficient software development is a major issue for MPSoc designers. An important step in deploying applications on multiprocessors is to allocate and schedule concurrent tasks to the processing and communication resources of the platform. The problem of allocating and scheduling precedenceconstrained tasks on processors in a distributed real-time system is NP-hard. There is a clear need for deployment technology that addresses thesemulti processing issues. This problem can be tackled by means of specific middleware which takes care of allocating and scheduling tasks on the different processing elements and which tries also to optimize the power consumption of the entire multiprocessor platform. This dissertation is an attempt to develop insight into efficient, flexible and optimalmethods for allocating and scheduling concurrent applications tomultiprocessor architectures. It is a well-known problem in literature: this kind of optimization problems are very complex even in much simplified variants, therefore most authors propose simplified models and heuristic approaches to solve it in reasonable time. Model simplification is often achieved by abstracting away platform implementation ”details”. As a result, optimization problems become more tractable, even reaching polynomial time complexity. Unfortunately, this approach creates an abstraction gap between the optimization model and the real HW-SW platform. The main issue with heuristic or, more in general, with incomplete search is that they introduce an optimality gap of unknown size. They provide very limited or no information on the distance between the best computed solution and the optimal one. The goal of this work is to address both abstraction and optimality gaps, formulating accurate models which accounts for a number of ”non-idealities” in real-life hardware platforms, developing novel mapping algorithms that deterministically find optimal solutions, and implementing software infrastructures required by developers to deploy applications for the targetMPSoC platforms. Energy Efficient LCDBacklightAutoregulation on Real-LifeMultimediaAp- plication Processor Despite the ever increasing advances in Liquid Crystal Display’s (LCD) technology, their power consumption is still one of the major limitations to the battery life of mobile appliances such as smart phones, portable media players, gaming and navigation devices. There is a clear trend towards the increase of LCD size to exploit the multimedia capabilities of portable devices that can receive and render high definition video and pictures. Multimedia applications running on these devices require LCD screen sizes of 2.2 to 3.5 inches andmore to display video sequences and pictures with the required quality. LCD power consumption is dependent on the backlight and pixel matrix driving circuits and is typically proportional to the panel area. As a result, the contribution is also likely to be considerable in future mobile appliances. To address this issue, companies are proposing low power technologies suitable for mobile applications supporting low power states and image control techniques. On the research side, several power saving schemes and algorithms can be found in literature. Some of them exploit software-only techniques to change the image content to reduce the power associated with the crystal polarization, some others are aimed at decreasing the backlight level while compensating the luminance reduction by compensating the user perceived quality degradation using pixel-by-pixel image processing algorithms. The major limitation of these techniques is that they rely on the CPU to perform pixel-based manipulations and their impact on CPU utilization and power consumption has not been assessed. This PhDdissertation shows an alternative approach that exploits in a smart and efficient way the hardware image processing unit almost integrated in every current multimedia application processors to implement a hardware assisted image compensation that allows dynamic scaling of the backlight with a negligible impact on QoS. The proposed approach overcomes CPU-intensive techniques by saving system power without requiring either a dedicated display technology or hardware modification. Thesis Overview The remainder of the thesis is organized as follows. The first part is focused on enhancing energy efficiency and programmability of modern Multi-Processor System-on-Chips (MPSoCs). Chapter 2 gives an overview about architectural trends in embedded systems, illustrating the principal features of new technologies and the key challenges still open. Chapter 3 presents a QoS-driven methodology for optimal allocation and frequency selection for MPSoCs. The methodology is based on functional simulation and full system power estimation. Chapter 4 targets allocation and scheduling of pipelined stream-oriented applications on top of distributed memory architectures with messaging support. We tackled the complexity of the problem by means of decomposition and no-good generation, and prove the increased computational efficiency of this approach with respect to traditional ones. Chapter 5 presents a cooperative framework to solve the allocation, scheduling and voltage/frequency selection problem to optimality for energyefficient MPSoCs, while in Chapter 6 applications with conditional task graph are taken into account. Finally Chapter 7 proposes a complete framework, called Cellflow, to help programmers in efficient software implementation on a real architecture, the Cell Broadband Engine processor. The second part is focused on energy efficient software techniques for LCD displays. Chapter 8 gives an overview about portable device display technologies, illustrating the principal features of LCD video systems and the key challenges still open. Chapter 9 shows several energy efficient software techniques present in literature, while Chapter 10 illustrates in details our method for saving significant power in an LCD panel. Finally, conclusions are drawn, reporting the main research contributions that have been discussed throughout this dissertation.

Rethinking special and differential treatment in the WTO

Special and differential treatment (S&D) allows differentiated treatment for developing countries within the WTO system by justifying a deviation from the most-favoured-nation obligation. Since it was incorporated into the GATT (the predecessor of the WTO) in the 1960s, S&D has played a significant role in promoting the integration of developing countries into the multilateral trading system. However, S&D is undergoing complicated and entangled discussion at the current multilateral trade negotiations, the Doha Development Agenda. There are a number of reasons to make opposing arguments in developed and developing countries, among which this paper focuses on two elements: diversification of developing countries and instability of preferential schemes. In order to overcome these problems and in order to make S&D more effective and operational, this paper considers the following alternative approaches: differentiation among developing countries applying the common but differentiated responsibility (CBDR) principle by analogy and codification of a preferential scheme as a multilateral agreement in the manner of North-South RTAs with flexibility.

Nuevo paradigma para decisiones colectivas en entornos no competitivos

La tesis estudia uno de los aspectos más importantes de la gestión de la sociedad de la información: conocer la manera en que una persona valora cualquier situación. Esto es importante para el individuo que realiza la valoración y para el entorno con el que se relaciona. La valoración es el resultado de la comparación: se asignan los mismos valores a alternativas similares y mayores valores a alternativas mejor consideradas en el proceso de comparación. Los patrones que guían al individuo a la hora de hacer la comparación se derivan de sus preferencias individuales (es decir, de sus opiniones). En la tesis se presentan varios procedimientos para establecer las relaciones de preferencia entre alternativas de una persona. La valoración progresa hasta obtener una representación numérica de sus preferencias. Cuando la representación de preferencias es homogénea permite, además, contrastar las preferencias personales con las del resto de evaluadores, lo que favorece la evaluación de políticas, la transferencia de información entre diferentes individuos y el diseño de la alternativa que mejor se adapte a las preferencias identificadas. Al mismo tiempo, con esta información se pueden construir comunidades de personas con los mismos sistemas de preferencias ante una cuestión concreta. La tesis muestra un caso de aplicación de esta metodología: optimización de las políticas laborales en un mercado real. Para apoyar a los demandantes de empleo (en su iniciación o reincorporación al mundo laboral o en el cambio de su actividad) es necesario conocer sus preferencias respecto a las ocupaciones que están dispuestos a desempeñar. Además, para que la intermediación laboral sea efectiva, las ocupaciones buscadas deben de ser ofrecidas por el mercado de trabajo y el demandante debe reunir las condiciones para acceder a esas ocupaciones. El siguiente desarrollo de estos modelos nos lleva a los procedimientos utilizados para transformar múltiples preferencias en una decisión agregada y que consideran tanto la opinión de cada uno de los individuos que participan en la decisión como las interacciones sociales, todo ello dirigido a generar una solución que se ajuste lo mejor posible al punto de vista de toda la población. Las decisiones con múltiples participantes inciden, principalmente, en: el aumento del alcance para incorporar a personas que tradicionalmente no han sido consideradas en las tomas de decisiones, la agregación de las preferencias de los múltiples participantes en las tomas de decisiones colectivas (mediante votación, utilizando aplicaciones desarrolladas para la Web2.0 y a través de comparaciones interpersonales de utilidad) y, finalmente, la auto-organización para permitir que interaccionen entre si los participantes en la valoración, de forma que hagan que el resultado final sea mejor que la mera agregación de opiniones individuales. La tesis analiza los sistemas de e-democracia o herramientas para su implantación que tienen más más utilización en la actualidad o son más avanzados. Están muy relacionados con la web 2.0 y su implantación está suponiendo una evolución de la democracia actual. También se estudian aplicaciones de software de Colaboración en la toma de decisiones (Collaborative decision-making (CDM)) que ayudan a dar sentido y significado a los datos. Pretenden coordinar las funciones y características necesarias para llegar a decisiones colectivas oportunas, lo que permite a todos los interesados participar en el proceso. La tesis finaliza con la presentación de un nuevo modelo o paradigma en la toma de decisiones con múltiples participantes. El desarrollo se apoya en el cálculo de las funciones de utilidad empática. Busca la colaboración entre los individuos para que la toma de decisiones sea más efectiva, además pretende aumentar el número de personas implicadas. Estudia las interacciones y la retroalimentación entre ciudadanos, ya que la influencia de unos ciudadanos en los otros es fundamental para los procesos de toma de decisiones colectivas y de e-democracia. También incluye métodos para detectar cuando se ha estancado el proceso y se debe interrumpir. Este modelo se aplica a la consulta de los ciudadanos de un municipio sobre la oportunidad de implantar carriles-bici y las características que deben tomar. Se simula la votación e interacción entre los votantes. ABSTRACT The thesis examines one of the most important aspects of the management of the information society: get to know how a person values every situation. This is important for the individual performing the assessment and for the environment with which he interacts. The assessment is a result of the comparison: identical values are allocated to similar alternatives and higher values are assigned to those alternatives that are more favorably considered in the comparison process. Patterns that guide the individual in making the comparison are derived from his individual preferences (ie, his opinions). In the thesis several procedures to establish preference relations between alternatives a person are presented. The assessment progresses to obtain a numerical representation of his preferences. When the representation of preferences is homogeneous, it also allows the personal preferences of each individual to be compared with those of other evaluators, favoring policy evaluation, the transfer of information between different individuals and design the alternative that best suits the identified preferences. At the same time, with this information you can build communities of people with similar systems of preferences referred to a particular issue. The thesis shows a case of application of this methodology: optimization of labour policies in a real market. To be able support jobseekers (in their initiation or reinstatement to employment or when changing area of professional activity) is necessary to know their preferences for jobs that he is willing to perform. In addition, for labour mediation to be effective occupations that are sought must be offered by the labour market and the applicant must meet the conditions for access to these occupations. Further development of these models leads us to the procedures used to transform multiple preferences in an aggregate decision and consider both the views of each of the individuals involved in the decision and the social interactions, all aimed at generating a solution that best fits of the point of view of the entire population. Decisions with multiple participants mainly focus on: increasing the scope to include people who traditionally have not been considered in decision making, aggregation of the preferences of multiple participants in collective decision making (by vote, using applications developed for the Web 2.0 and through interpersonal comparisons of utility) and, finally, self-organization to allow participants to interact with each other in the assessment, so that the final result is better than the mere aggregation of individual opinions. The thesis analyzes the systems of e-democracy or tools for implementation which are more popular or more advanced. They are closely related to the Web 2.0 and its implementation is bringing an evolution of the current way of understanding democracy. We have also studied Collaborative Decision-Making (CDM)) software applications in decision-making which help to give sense and meaning to the data. They intend to coordinate the functions and features needed to reach adequate collective decisions, allowing all stakeholders to participate in the process. The thesis concludes with the presentation of a new model or paradigm in decision-making with multiple participants. The development is based on the calculation of the empathic utility functions. It seeks collaboration between individuals to make decision-making more effective; it also aims to increase the number of people involved. It studies the interactions and feedback among citizens, because the influence of some citizens in the other is fundamental to the process of collective decision-making and e-democracy. It also includes methods for detecting when the process has stalled and should be discontinued. This model is applied to the consultation of the citizens of a municipality on the opportunity to introduce bike lanes and characteristics they should have. Voting and interaction among voters is simulated.

The Treaty of Lisbon or intergovernmental temptation?

From the Introduction. This question goes to the very heart of the European project: it is fundamental for the future of the European Union and its role in the world. The Treaty of Lisbon emerged from the ashes of the European Constitution. Driven forward by Angela Merkel, as President of the European Council, Nicolas Sarkozy and José Manuel Barroso, the main advances made in the Constitution were preserved at the expense of a few concessions and symbolic sacrifices in order to make the Union more effective and more democratic.

New Pact for Europe: Towards a New Pact for Europe. Second report, October 2014

As the new EU leadership takes office, Europe faces a complex web of economic, political, social and global challenges which require new responses – above all, the need to restore the public’s faith and trust after the years of crisis which have prompted growing dissatisfaction with the Union, with many people now seeing it as part of the problem rather than part of the solution to those challenges. In 2012, a consortium of 11 European foundations initiated by the King Baudouin Foundation and Bertelsmann Stiftung, and supported by the European Policy Centre, decided to launch a project to promote a Europe-wide debate on the future of EU integration: an ambitious participatory initiative whose ultimate goal is to develop realistic reform proposals to shore up a Union hit by multiple storms in recent years, which have left many people questioning its capacity to respond effectively to those challenges. Two years later, we are proud to be able to present the outcome of this endeavour: the result of a joint reflection process involving the public, politicians, policy-makers, business leaders, trade unionists, EU experts, opinion-formers and other civil society representatives in many EU Member States. Obviously, not all the ideas and proposals generated by this process could be included in this report, but we hope that it faithfully reflects the feedback we received in all the debates. The discussions we have had led to the report that you now hold in your hands, which calls for a New Pact for Europe – between EU Member States and between the EU and its citizens – to enhance the Union’s capacity to deliver effective solutions to the many challenges facing Europe, and to do so in a way that benefits all EU countries and groups within society. This report is designed to feed into the on-going discussions about the EU’s future as the new leadership team takes charge, providing what we hope will be seen as a valuable contribution to the debate on how to introduce ambitious while at the same time workable and realistic reforms to make the EU more effective in responding to the challenges we face. We hope that it will be taken up for discussion by the new European Parliament, the new leadership of the European Commission, European Council and European External Action Service, and also by policy-makers in the Member States. And it does not by any means mark the end of the process. The report will be discussed again with policy-makers and stakeholders in a majority of Member States. Their feedback is important to us and will impact the future progress of the initiative.

Capital Markets Union: A Work in Progress: Quick and high impact measures for the Capital Markets Union. European Policy Brief No. 37, September 2015

Capital Markets Union has three objectives. The first objective is to improve access to finance for all businesses but especially SMEs; the second is to increase the share of capital markets in the funding mix of the real economy; and the third is to make capital markets more effective and integrate them more closely across borders. This paper examines the best impact measures for the Capital Markets Union to proceed successfully.

Learner initiative in the language classroom

This article looks at learner initiative in teacher-fronted activities and how this can influence classroom interaction. Extracts from lesson transcripts of adult evening classes in Italy are used to give a precise definition of what is meant by learner initiative and to illustrate how it can change interaction patterns. It is suggested that learner initiative could have an important role to play in promoting comprehensible input and output and therefore language learning. It will be seen how, by giving learners more space and time, initiative can be actively encouraged. However, there are direct implications for teacher training as it is necessary to change traditional interaction patterns and make learner initiative more effective.

New Europe’s new development aid

This book examines the international development policies of five East Central European new EU member states, the Czech Republic, Hungary, Poland, Slovakia and Slovenia. These countries turned from being aid recipients to donors after the turn of the millennium in the run-up to EU accession in 2004. The book explains the evolution subsequent to EU accession and current state of foreign aid policies in the region and the reasons why these deviate from many of the internationally agreed best practices in development cooperation. It argues that after the turn of the millennium, a 'Global Consensus' has emerged on how to make foreign aid more effective for development. A comparison between the elements of the Global Consensus and the performance of the five countries reveals that while they have generally implemented little of these recommendations, there are also emerging differences between the countries, with the Czech Republic and Slovenia clearly aspiring to become globally responsible donors. Building on the literatures on foreign policy analysis, international socialization and interest group influence, the book develops a model of foreign aid policy making in order to explain the general reluctance of the five countries in implementing international best practices, and also the differences in their relative performance.