Research on evaluation system of emergency disposal plan for power plant incidents

This paper starts with the analysis of the unusual inherence mechanism, from two aspects: accumulating and human error. We put forward twelve factors affected the decision of the emergency treatment plan in practice and summarized the evaluation index system combining with literature data. Then we screened out eighteen representative indicators by used the FDM expert questionnaire in the first phase. Hereafter, we calculated the weight of evaluation index and sorted them by the FAHP expert questionnaire, and came up with the frame of the evaluation rule by combined with the experience. In the end, the evaluation principles are concluded.

Ensemble: an e-learning framework

E-Learning frameworks are conceptual tools to organize networks of elearning services. Most frameworks cover areas that go beyond the scope of e-learning, from course to financial management, and neglects the typical activities in everyday life of teachers and students at schools such as the creation, delivery, resolution and evaluation of assignments. This paper presents the Ensemble framework - an e-learning framework exclusively focused on the teaching-learning process through the coordination of pedagogical services. The framework presents an abstract data, integration and evaluation model based on content and communications specifications. These specifications must base the implementation of networks in specialized domains with complex evaluations. In this paper we specialize the framework for two domains with complex evaluation: computer programming and computer-aided design (CAD). For each domain we highlight two Ensemble hotspots: data and evaluations procedures. In the former we formally describe the exercise and present possible extensions. In the latter, we describe the automatic evaluation procedures.

A further investigation of the cytochrome b5–cytochrome c complex

J Biol Inorg Chem (2003) 8: 777–786

Density measurements of compressed dipropyl, dibutul, bis (2-ethylhexyl) adipates from (293 to 373K) at pressures up to about 68MPa

The article reports density measurements of dipropyl (DPA), dibutyl (DBA) and bis(2-ethylhexyl) (DEHA) adipates, using a vibrating U-tube densimeter, model DMA HP, from Anton Paar GmbH. The measurements were performed in the temperature range (293 to 373) K and at pressures up to about 68 MPa, except for DPA for which the upper limits were 363 K and 65 MPa, respectively. The density data for each liquid was correlated with the temperature and pressure using a modified Tait equation. The expanded uncertainty of the present density results is estimated as 0.2% at a 95% confidence level. No literature density data at pressures higher than 0.1 MPa could be found. DEHA literature data at atmospheric pressure agree with the correlation of the present measurements, in the corresponding temperature range, within +/- 0.11%. The isothermal compressibility and the isobaric thermal expansion were calculated by differentiation of the modified Tait correlation equation. These two parameters were also calculated for dimethyl adipate (DMA), from density data reported in a previous work. The uncertainties of isothermal compressibility and the isobaric thermal expansion are estimated to be less than +/- 1.7% and +/- 1.1%, respectively, at a 95% confidence level. Literature data of isothermal compressibility and isobaric thermal expansivity for DMA have an agreement within +/- 1% and +/- 2.4%, respectively, with results calculated in this work. (C) 2014 Elsevier B.V. All rights reserved.

Tris(2-Ethylhexyl) trimellitate (TOTM) a potential reference fluid for high viscosity. Part I: viscosity measurements at temperatures from (303 to 373)K and pressures up to 65MPa, using a novel vibrating-wire instrument

No literature data above atmospheric pressure could be found for the viscosity of TOTIVI. As a consequence, the present viscosity results could only be compared upon extrapolation of the vibrating wire data to 0.1 MPa. Independent viscosity measurements were performed, at atmospheric pressure, using an Ubbelohde capillary in order to compare with the vibrating wire results, extrapolated by means of the above mentioned correlation. The two data sets agree within +/- 1%, which is commensurate with the mutual uncertainty of the experimental methods. Comparisons of the literature data obtained at atmospheric pressure with the present extrapolated vibrating-wire viscosity measurements have shown an agreement within +/- 2% for temperatures up to 339 K and within +/- 3.3% for temperatures up to 368 K. (C) 2014 Elsevier B.V. All rights reserved.

Budget impact from the incorporation of positron emission tomography – computed tomography for staging lung cancers

OBJECTIVE To estimate the budget impact from the incorporation of positron emission tomography (PET) in mediastinal and distant staging of non-small cell lung cancer.METHODS The estimates were calculated by the epidemiological method for years 2014 to 2018. Nation-wide data were used about the incidence; data on distribution of the disease´s prevalence and on the technologies’ accuracy were from the literature; data regarding involved costs were taken from a micro-costing study and from Brazilian Unified Health System (SUS) database. Two strategies for using PET were analyzed: the offer to all newly-diagnosed patients, and the restricted offer to the ones who had negative results in previous computed tomography (CT) exams. Univariate and extreme scenarios sensitivity analyses were conducted to evaluate the influence from sources of uncertainties in the parameters used.RESULTS The incorporation of PET-CT in SUS would imply the need for additional resources of 158.1 BRL (98.2 USD) million for the restricted offer and 202.7 BRL (125.9 USD) million for the inclusive offer in five years, with a difference of 44.6 BRL (27.7 USD) million between the two offer strategies within that period. In absolute terms, the total budget impact from its incorporation in SUS, in five years, would be 555 BRL (345 USD) and 600 BRL (372.8 USD) million, respectively. The costs from the PET-CT procedure were the most influential parameter in the results. In the most optimistic scenario, the additional budget impact would be reduced to 86.9 BRL (54 USD) and 103.8 BRL (64.5 USD) million, considering PET-CT for negative CT and PET-CT for all, respectively.CONCLUSIONS The incorporation of PET in the clinical staging of non-small cell lung cancer seems to be financially feasible considering the high budget of the Brazilian Ministry of Health. The potential reduction in the number of unnecessary surgeries may cause the available resources to be more efficiently allocated.

Extensible metadata repository for information systems

Thesis submitted to Faculdade de Ciências e Tecnologia of the Universidade Nova de Lisboa, in partial fulfillment of the requirements for the degree of Master in Computer Science

Sustainability Evaluation of Biodiesel Produced from Microalgae Chlamydomonas sp Grown in Brewery Wastewater

This study performs a sustainability evaluation of biodiesel from microalga Chlamydomonas sp. grown in 20 % (v/v) of brewery’s wastewater, blended with pentose sugars (xylose, arabinose or ribose resulting from the hydrolysis of brewer’s spent grains (BSG). The life cycle steps considered for the study are: microalgae cultivation, biomass processing and lipids extraction at the brewery site, and its conversion to biodiesel at a dedicated external biofuel’s plant. Three sustainability indicators (LCEE, FER and GW) were considered and calculated using experimental data. Literature data was used, whenever necessary, to complement life cycle data, thus allowing a more accurate sustainability evaluation. A comparative analysis of the biodiesel life cycle steps was also conducted, with the main goal of identifying which steps need to be improved. Results show that biomass processing, especially cell harvesting, microalgae cultivation, and lipids extraction are the main process bottlenecks. It is also analysed the influence on the microalgae biodiesel sustainability of adding each pentose sugar to the cultivation media, concluding that it strongly influences the biomass and lipid productivity. In particular, the addition of xylose is preferable in terms of lipid productivity, but from a sustainability point of view, ribose is the best, though the difference from xylose is not significant. Nevertheless, culture without pentose addition presents the best sustainability results.

Viscosity and self-diffusion coefficients of dialkyl adipates: a correlation scheme with predictive capabilities

A correlation and predictive scheme for the viscosity and self-diffusivity of liquid dialkyl adipates is presented. The scheme is based on the kinetic theory for dense hard-sphere fluids, applied to the van der Waals model of a liquid to predict the transport properties. A "universal" curve for a dimensionless viscosity of dialkyl adipates was obtained using recently published experimental viscosity and density data of compressed liquid dimethyl (DMA), dipropyl (DPA), and dibutyl (DBA) adipates. The experimental data are described by the correlation scheme with a root-mean-square deviation of +/- 0.34 %. The parameters describing the temperature dependence of the characteristic volume, V-0, and the roughness parameter, R-eta, for each adipate are well correlated with one single molecular parameter. Recently published experimental self-diffusion coefficients of the same set of liquid dialkyl adipates at atmospheric pressure were correlated using the characteristic volumes obtained from the viscosity data. The roughness factors, R-D, are well correlated with the same single molecular parameter found for viscosity. The root-mean-square deviation of the data from the correlation is less than 1.07 %. Tests are presented in order to assess the capability of the correlation scheme to estimate the viscosity of compressed liquid diethyl adipate (DEA) in a range of temperatures and pressures by comparison with literature data and of its self-diffusivity at atmospheric pressure in a range of temperatures. It is noteworthy that no data for DEA were used to build the correlation scheme. The deviations encountered between predicted and experimental data for the viscosity and self-diffusivity do not exceed 2.0 % and 2.2 %, respectively, which are commensurate with the estimated experimental measurement uncertainty, in both cases.

Description of the egg of Anopheles (Anopheles) intermedius (Peryassu, 1908) (Diptera: Culicidae) by scanning electron microscopy

The egg of Anopheles (Anopheles) intermedius (Peryassu, 1908) is described and illustrated with scanning electron micrographs. Literature data on An. (Ano.) maculipes (Theobald, 1903) is provided

Os custos das fracturas de etiologia osteoporótica em mulheres : institucionalização na Rede Nacional de Cuidados Continuados (RNCCI) e lares de 3ª idade

RESUMO - Contexto: A osteoporose é uma doença sistémica associada à diminuição da resistência óssea que condiciona o aparecimento de fracturas por traumatismos de baixa energia as quais reduzem em muitos casos a esperança e a qualidade de vida, implicando um elevado número de horas de dedicação dos cuidadores e conduzindo, em muitos casos, à necessidade de institucionalização dos doentes. Em Portugal, ocorrem cerca de 40.000 fracturas anualmente, das quais 8.500 do fémur proximal, que se estima consumirem mais de 50 milhões de euros só em cuidados hospitalares1. Objectivo: Avaliar o impacto económico da institucionalização na Rede Nacional de Cuidados Continuados Integrados e Lares da 3ª idade por fractura de etiologia osteoporótica em mulheres no ano 2009, em Portugal. Métodos: O estudo começa por analisar sucintamente os aspectos clínicos, sociais e epidemiológicos da osteoporose, focando a perda de autonomia e qualidade de vida dos doentes vítimas deste episódio e a subsequente necessidade de institucionalização. Descrevem-se os custos associados à institucionalização na RNCCI, em Portugal, ano 2009, utilizando como fonte principal a base de dados da instituição “Gestcare CCI”, complementada com dados da literatura. Apuram-se os custos totais associados ao encaminhamento dos doentes para Lares de 3ª Idade em Portugal no ano 2009, utilizando-se informação proveniente de um painel de Delphi modificado e dados da literatura. A valorização dos recursos tem por base os preços em vigor no território nacional, expressos nos decretos-lei devidamente referenciados. Resultados: No ano 2009 em Portugal foram empregues cerca de 2,5 milhões de euros no internamento das mulheres na RNCCI, na perspectiva da sociedade, sendo cerca de 2,2 milhões atribuíveis à osteoporose (90%). Cerca de 91% dos custos totais são alocados à fractura osteoporótica da anca (2 milhões €). Para a fractura vertebral, úmero e punho os custos foram mais baixos - 7,1%, 1,3% e 1% dos custos totais da osteoporose, respectivamente. Nos Lares de 3ª idade, estimou-se a admissão de aproximadamente 14.372 doentes com fractura osteoporótica em diferentes localizações, em 2009, Portugal, com um custo que oscilou entre os 19 e os 21,6 milhões de euros. A fractura osteoporótica da anca foi a mais incidente e a que representou custos mais elevados para a Segurança Social – entre 17,5 e 19,7 milhões de euros. Considerando como referência os 52 milhões de euros gastos em 2006 no tratamento hospitalar da fractura da anca (DGS, 2006), o encaminhamento das mulheres para a RNCCI e Lares da 3ª Idade corresponde a 42% do bolo total. Assim, os resultados nacionais enquadram-se no que se encontra descrito na literatura internacional - os custos atribuíveis à hospitalização oscilaram entre 17%50 e 63%29 da despesa total da doença e das institucionalizações entre os 16%58 e os 59%51. Conclusões: Em Portugal o impacto económico da institucionalização por fractura osteoporótica, sobretudo por fractura da anca, não é desprezável e mostra que existiriam poupanças significativas se fosse possível reduzir a prevalência da doença em Portugal. Face às alterações demográficas associadas ao envelhecimento da população, é expectável que a incidência e custos com o tratamento das fracturas do colo do fémur, mais associadas à osteoporose, venham a subir nos próximos anos, pelo que o combate à doença deve ser considerada uma prioridade nacional. A decisão pela opção por determinados programas de prevenção da doença ou da comparticipação ou não de determinada terapêutica necessita contudo de ser complementada com a medição da dimensão dos benefícios terapêuticos. --- ABSTRACT - Background: Osteoporosis is a systemic disease associated with the loss off the bone strength and it is one of the major causes of low energy fractures, which in many cases reduce life hope and quality. This happens because it has associated extensive treatments and it usually carries loss of independence, implying many hours of caregivers dedication and leading, in many cases, to the institutionalization of the patients. In Portugal, about 40,000 fractures occur annually, which 8,500 are proximal femur, and that are estimated to consume over 50 million euros only in hospital care. Objective: Evaluate the economic impact of institutionalization on the Integrated Continued Care National Network (RNCCI) and Care Homes associated to osteoporotic fractures in women, in the year 2009 in Portugal. Methods: The study begins by reviewing briefly the clinical, social, and epidemiological studies of osteoporosis and osteoporotic fractures, focusing on the patient autonomy loss and life quality. The total and average costs per episode associated with the institutionalization in RNCCI are described, in Portugal, year 2009, using as main data source the application "Gestcare CCI", complemented with literature data. The total costs associated with the patients referral for the Care Homes in Portugal in 2009 is also calculated, using information from a modified Delphi panel and some literature data. The resources valuation is based on prices prevailing in Portugal. Results: In 2009, women relocation in RNCCI consumed approximately 2.5 million euros, which 2.2 million are attributable to osteoporosis (90%). About 91% of the total costs are allocated to osteoporotic hip fracture (€ 2 million). For vertebral, humerus, and wrist fracture, the associated costs were lower, 7.1%, 1.3%, and 1% of total costs of osteoporosis treatment, respectively. In Care Homes, an intake of approximately 14 372 patients with osteoporotic fracture was estimated, at a cost that is between 19 and 21.6 million euros. The osteoporotic hip fracture was the most frequent and represented higher costs for Social Security - between 17.5 and 19.7 million euros. Taking as reference the 52 million spent in 2006 with hospital treatment of hip fracture (DGS, 2006), referring women to RNCCI and Care Homes represents 42% of the total costs. The results are in accordance with the international literature - costs attributable to hospitalization ranged between 17% and 63% of total expenditure of illness and institutionalization between 16% and 59%. Conclusions: In Portugal, the economic impact of institutionalization for osteoporotic fracture, particularly for hip fracture, is not negligible. It was shown that there would be significant savings if it were possible to reduce the prevalence of the disease in Portugal. Femoral fractures were the second most frequent diagnosis in RNCCI in 2008 and 2009 (16% of all episodes recorded). The execution of RNCCI in 2008 was 75 million euros, and 2.7% consumed by hip fracture and 0.3% by wrist, humerus, and spine fractures. The average cost per episode in 2009, from the perspective of society, for hip fracture, vertebral, humerus, and wrist (or non-osteoporotic) was € 5,195, € 5,160, € 5,030, and € 4,854 respectively. Thus, considering an average cost per episode in RNCCI from January to March of 3230€, the expense related to the treatment of these patients in RNCCI in 2009 was higher. For the Care Homes, an intake of approximately 14 372 patients with osteoporotic fracture in 2009 was estimated, at a cost to Social Security that ranged from 19 to 21.6 million €. The osteoporotic hip fracture was the most frequent and it was shown to absorve higher resources from Social Security - between 17.5 and 19.7 million €. This was followed by the analysis of vertebral and humerus fracture and the results showed that these fractures have a low incidence and low proportion of institutionalization, with a significantly lower cost - only about 4.7% and 3.3% of total expenditure, respectively. With demographic changes associated to ageing, it is expected that the incidence and treatment cost of the femoral neck fractures, more commonly associated with osteoporosis, will climb in coming years, so the fight against the disease should be considered a national priority. The decision to choose a certain disease prevention program or to reimburse a certain drug not should only account about the costs, but also the benefits of it. In fact, the size and impact of this problem, makes it necessary to focus all interventions in the prevention of these episodes either by using an appropriate therapy, either through real programs for disease prevention. Once the problem is installed, we must measure the health gains associated with the patient institutionalization by conducting additional research.

Hydrogeomechanics for rock engineering: coupling subsurface hydrogeomechanical assessement and hydrogeotechnical mapping on fracturated rock masses

The present work aims to achieve and further develop a hydrogeomechanical approach in Caldas da Cavaca hydromineral system rock mass (Aguiar da Beira, NW Portugal), and contribute to a better understanding of the hydrogeological conceptual site model. A collection of several data, namely geology, hydrogeology, rock and soil geotechnics, borehole hydraulics and hydrogeomechanics, was retrieved from three rock slopes (Lagoa, Amores and Cancela). To accomplish a comprehensive analysis and rock engineering conceptualisation of the site, a multi‐technical approach were used, such as, field and laboratory techniques, hydrogeotechnical mapping, hydrogeomechanical zoning and hydrogeomechanical scheme classifications and indexes. In addition, a hydrogeomechanical data analysis and assessment, such as Hydro‐Potential (HP)‐Value technique, JW Joint Water Reduction index, Hydraulic Classification (HC) System were applied on rock slopes. The hydrogeomechanical zone HGMZ 1 of Lagoa slope achieved higher hydraulic conductivities with poorer rock mass quality results, followed by the hydrogeomechanical zone HGMZ 2 of Lagoa slope, with poor to fair rock mass quality and lower hydraulic parameters. In addition, Amores slope had a fair to good rock mass quality and the lowest hydraulic conductivity. The hydrogeomechanical zone HGMZ 3 of Lagoa slope, and the hydrogeomechanical zones HGMZ 1 and HGMZ 2 of Cancela slope had a fair to poor rock mass quality but were completely dry. Geographical Information Systems (GIS) mapping technologies was used in overall hydrogeological and hydrogeomechanical data integration in order to improve the hydrogeological conceptual site model.

A further investigation of the cytochrome b5–cytochrome c complex

J Biol Inorg Chem (2003) 8: 777–786 DOI 10.1007/s00775-003-0479-y

Vehicle-to-anything application (v2anything app) for electric vehicles

This paper presents a mobile information system denominated as Vehicle-to-Anything Application (V2Anything App), and explains its conceptual aspects. This application is aimed at giving relevant information to Full Electric Vehicle (FEV) drivers, by supporting the integration of several sources of data in a mobile application, thus contributing to the deployment of the electric mobility process. The V2Anything App provides recommendations to the drivers about the FEV range autonomy, location of battery charging stations, information of the electricity market, and also a route planner taking into account public transportations and car or bike sharing systems. The main contributions of this application are related with the creation of an Information and Communication Technology (ICT) platform, recommender systems, data integration systems, driver profile, and personalized range prediction. Thus, it is possible to deliver relevant information to the FEV drivers related with the electric mobility process, electricity market, public transportation, and the FEV performance.

Conceptual-physical bridging – From BPMN models to physical implementations on kettle

Developing and implementing data-oriented workflows for data migration processes are complex tasks involving several problems related to the integration of data coming from different schemas. Usually, they involve very specific requirements - every process is almost unique. Having a way to abstract their representation will help us to better understand and validate them with business users, which is a crucial step for requirements validation. In this demo we present an approach that provides a way to enrich incrementally conceptual models in order to support an automatic way for producing their correspondent physical implementation. In this demo we will show how B2K (Business to Kettle) system works transforming BPMN 2.0 conceptual models into Kettle data-integration executable processes, approaching the most relevant aspects related to model design and enrichment, model to system transformation, and system execution.