Limited-view light sheet fluorescence microscopy for three dimensional volume imaging

We propose and demonstrate a limited-view light sheet microscopy (LV-LSM) for three dimensional (3D) volume imaging. Realizing that longer and frequent image acquisition results in significant photo-bleaching, we have taken limited angular views (18 views) of the macroscopic specimen and integrated with maximum likelihood (ML) technique for reconstructing high quality 3D volume images. Existing variants of light-sheet microscopy require both rotation and translation with a total of approximately 10-fold more views to render a 3D volume image. Comparatively, LV-LSM technique reduces data acquisition time and consequently minimizes light-exposure by many-folds. Since ML is a post-processing technique and highly parallelizable, this does not cost precious imaging time. Results show noise-free and high contrast volume images when compared to the state-of-the-art selective plane illumination microscopy. (C) 2015 AIP Publishing LLC.

Optical-Phonon-Limited High-Field Transport in Layered Materials

An optical-phonon-limited velocity model has been employed to investigate high-field transport in a selection of layered 2-D materials for both, low-power logic switches with scaled supply voltages, and high-power, high-frequency transistors. Drain currents, effective electron velocities, and intrinsic cutoff frequencies as a function of carrier density have been predicted, thus providing a benchmark for the optical-phonon-limited high-field performance limits of these materials. The optical-phonon-limited carrier velocities for a selection of multi-layers of transition metal dichalcogenides and black phosphorus are found to be modest compared to their n-channel silicon counterparts, questioning the utility of biasing these devices in the source-injection dominated regime. h-BN, at the other end of the spectrum, is shown to be a very promising material for high-frequency, high-power devices, subject to the experimental realization of high carrier densities, primarily due to its large optical-phonon energy. Experimentally extracted saturation velocities from few-layer MoS2 devices show reasonable qualitative and quantitative agreement with the predicted values. The temperature dependence of the measured v(sat) is discussed and compared with the theoretically predicted dependence over a range of temperatures.

Making consistent contacts to graphene: effect of architecture and growth induced defects

The effects of contact architecture, graphene defect density and metal-semiconductor work function difference on the resistivity of metal-graphene contacts have been investigated. An architecture with metal on the bottom of graphene is found to yield resistivities that are lower, by a factor of four, and most consistent as compared to metal on top of graphene. Growth defects in graphene film were found to further reduce resistivity by a factor of two. Using a combination of method and metal used, the contact resistivity of graphene has been decreased by a factor of 10 to 1200. +/-. 250 Omega mu m using palladium as the contact metal. While the improved consistency is due to the metal being able to contact uncontaminated graphene in the metal on the bottom architecture, lower contact resistivities observed on defective graphene with the same metal are attributed to the increased number of modes of quantum transport in the channel.

Anchor limited q in flexural mode resonators

This paper reports a preliminary examination of the effect of anchor geometry design on the quality factor of flexural mode resonators operating in vacuum using both FE simulation and measurements of resonator frequency response. Three types of structures have been considered in this study: an elliptical mode ring, a double ended tuning fork, and a doubly-clamped beam. We consider the relative distribution of strain energies in both the resonant structure and the connecting stem, which is indicative of the measured quality factor. The measured quality factors of the different structures are compared against each other, based on which suggestions are proposed for optimizing the anchor limited quality factor (Q) in flexural mode micromechanical resonators. ©2008 IEEE.

Carbon nanotube Schottky diode and directionally dependent field-effect transistor using asymmetrical contacts

We demonstrate the fabrication and operation of a carbon nanotube (CNT) based Schottky diode by using a Pd contact (high-work-function metal) and an Al contact (low-work-function metal) at the two ends of a single-wall CNT. We show that it is possible to tune the rectification current-voltage (I-V) characteristics of the CNT through the use of a back gate. In contrast to standard back gate field-effect transistors (FET) using same-metal source drain contacts, the asymmetrically contacted CNT operates as a directionally dependent CNT FET when gated. While measuring at source-drain reverse bias, the device displays semiconducting characteristics whereas at forward bias, the device is nonsemiconducting. © 2005 American Institute of Physics.

Limited access alternatives for the Pacific groundfish fishery

Despite its wide acceptance in other fisheries, limited access remains a controversial topic among Pacific coast groundfish fishermen and fishery managers. It is controversial because it immediately opens a wide array of public policy issues. How should the public conserve fish stocks, and who should benefit from harvesting those fish? What are the costs and benefits to the public, the taxpayer, the fishing industry, and the coastal communities supporting the groundfish industry? Should the government push the industry to be economically efficient in harvesting; or should it discourage technical efficiency to conserve fish stocks? Should management preserve the economic status quo by protecting existing harvest shares? These are the broad issues occupying the discussions of policy makers and academic writers concerned with resource management. The goal of this introductory section is to define limited access, to dispel some basic misunderstandings about limited access, to clarify the optional forms oflimited access, and to review the various resource management objectives addressed. This should set the stage for the following more lengthy discussions. By reducing the scope of needless misunderstandings, it should also help to make future discussions of limited access more productive. (PDF file contains 52 pages.)

Fish pond management at the Onibonoje Agricultural Industries (Nigeria) Limited, RSH farm at ESA Oke Road'Ijebu Jesa Oyo State, Nigeria

A brief account is given of fish culture at the Anibonoje Agricultural Industries Ltd. fish farm in Nigeria. The pond culture of Tilapia, Clarias lazera, Heterotis niloticus and Cyprinus carpio is outlined, describing the feeding of the fish, the fertilization of the ponds, and pond management. The role of the government vis-a-vis that of the organized private sector is also examined

Near-diffraction-limited, 35.4 W laser-diode end-pumped Nd:YVO4 slab laser operating at 1342 nm

A diode stack end-pumped Nd:YVO4 slab laser at 1342 nm with near-diffraction-limited beam quality by using a hybrid resonator was presented. At a pump power of 139.5 W, laser power of 35.4 W was obtained with a conversion efficiency of 25.4% of the laser diode to laser output. The beam quality M-2 factors were measured to be 1.2 in the unstable direction and 1.3 in the stable direction at the output power of 29 W. (C) 2009 Optical Society of America

Limited resources? Let the habitat priority planner help!

In this time of scarce resources, coastal resource managers must find ways to prioritize conservation, land use, and restoration efforts. The Habitat Priority Planner (HPP) is a free geospatial tool created by the National Oceanic and Atmospheric Administration’s Coastal Services Center that has received wide praise for its ease of use and broad applicability to conservation strategic planning, restoration, climate change scenarios, and other natural resource management actions. Not a geographic information system (GIS) user? Don’t worry―this tool was designed to be used in a team setting. One intermediate-level GIS user can push the buttons to show quick results while a roomful of resource managers and stakeholders provide input criteria that determine the results. The Habitat Priority Planner is a toolbar for ESRI’s ArcGIS platform that is composed of three modules: Habitat Classification, Habitat Analysis, and Data Explorer. The tool calculates basic ecological statistics that are used to examine how habitats function within a landscape. The tool pre‐packages several common landscape metrics into a user‐friendly interface for intermediate GIS users. In addition, HPP allows the user to build queries interactively using a graphical interface for demonstrating criteria selections quickly in a visual manner that is useful in stakeholder interactions. Tool advocates and users include land trusts, conservation alliances, nonprofit organizations, and select National Estuarine Research Reserves and refuges of the U.S. Fish and Wildlife Service. Participants in this session will learn the basic requirements for HPP use and the multiple ways the HPP has been applied to geographies nationwide. (PDF contains 5 pages)