Exploring the path through which career adaptability increases job satisfaction and lowers work stress : the role of affect

The construct of career adaptability, or the ability to successfully manage one's career development and challenges, predicts several important outcomes; however, little is known about the mechanisms contributing to its positive effects. The present study investigated the impact of career adaptability on job satisfaction and work stress, as mediated by individuals' affective states. Using a representative sample of 1671 individuals employed in Switzerland we hypothesized that, over time, career adaptability amplifies job satisfaction and attenuates work stress, through higher positive affect and lower negative affect, respectively. The data resulted from the first three waves of a longitudinal project on professional paths conducted in Switzerland. For each wave, participants completed a survey. Results of the 3-wave cross-lagged longitudinal model show that employees with higher career adaptability at Time 1 indeed experienced at Time 3 higher job satisfaction and lower work stress than those with lower career adaptability. The effect of career adaptability on job satisfaction and work stress was accounted for by negative affect: Individuals higher on career adaptability experienced less negative affect, which led to lower levels of stress and higher levels of job satisfaction, beyond previous levels of job satisfaction and work stress. Overall results support the conception of career adaptability as a self-regulatory resource that may promote a virtuous cycle in which individuals' evaluations of their resources to cope with the environment (i.e., career adaptability) shape their affective states, which in turn influence the evaluations of their job.

Tracing the associations between sex, the atypical and the combined atypical-melancholic depression subtypes: A path analysis.

BACKGROUND: Numerous studies have examined determinants leading to preponderance of women in major depressive disorder (MDD), which is particularly accentuated for the atypical depression subtype. It is thus of interest to explore the specific indirect effects influencing the association between sex and established depression subtypes. METHODS: The data of 1624 subjects with a lifetime diagnosis of MDD derived from the population-based PsyCoLaus data were used. An atypical (n=256), a melancholic (n=422), a combined atypical and melancholic features subtype (n=198), and an unspecified MDD group (n=748) were constructed according to the DSM-IV specifiers. Path models with direct and indirect effects were applied to the data. RESULTS: Partial mediation of the female-related atypical and combined atypical-melancholic depression subtypes was found. Early anxiety disorders and high emotion-orientated coping acted as mediating variables between sex and the atypical depression subtype. In contrast, high Body Mass Index (BMI) served as a suppression variable, also concerning the association between sex and the combined atypical-melancholic subtype. The latter association was additionally mediated by an early age of MDD onset and early/late anxiety disorders. LIMITATIONS: The use of cross-sectional data does not allow causal conclusions. CONCLUSIONS: This is the first study that provides evidence for a differentiation of the general mechanisms explaining sex differences of overall MDD by depression subtypes. Determinants affecting the pathways begin early in life. Since some of them are primarily of behavioral nature, the present findings could be a valuable target in mental health care.

Improving anterior deltoid activity in a musculoskeletal shoulder model - an analysis of the torque-feasible space at the sternoclavicular joint.

Modelling the shoulder's musculature is challenging given its mechanical and geometric complexity. The use of the ideal fibre model to represent a muscle's line of action cannot always faithfully represent the mechanical effect of each muscle, leading to considerable differences between model-estimated and in vivo measured muscle activity. While the musculo-tendon force coordination problem has been extensively analysed in terms of the cost function, only few works have investigated the existence and sensitivity of solutions to fibre topology. The goal of this paper is to present an analysis of the solution set using the concepts of torque-feasible space (TFS) and wrench-feasible space (WFS) from cable-driven robotics. A shoulder model is presented and a simple musculo-tendon force coordination problem is defined. The ideal fibre model for representing muscles is reviewed and the TFS and WFS are defined, leading to the necessary and sufficient conditions for the existence of a solution. The shoulder model's TFS is analysed to explain the lack of anterior deltoid (DLTa) activity. Based on the analysis, a modification of the model's muscle fibre geometry is proposed. The performance with and without the modification is assessed by solving the musculo-tendon force coordination problem for quasi-static abduction in the scapular plane. After the proposed modification, the DLTa reaches 20% of activation.

Pulmonary 64-MDCT angiography with 50 mL of iodinated contrast material in an unselected patient population: a feasible protocol

Abstract Objective: To propose a protocol for pulmonary angiography using 64-slice multidetector computed tomography (64-MDCT) with 50 mL of iodinated contrast material, in an unselected patient population, as well as to evaluate vascular enhancement and image quality. Materials and Methods: We evaluated 29 patients (22-86 years of age). The body mass index ranged from 19.0 kg/m2 to 41.8 kg/m2. Patients underwent pulmonary CT angiography in a 64-MDCT scanner, receiving 50 mL of iodinated contrast material via venous access at a rate of 4.5 mL/s. Bolus tracking was applied in the superior vena cava. Two experienced radiologists assessed image quality and vascular enhancement. Results: The mean density was 382 Hounsfield units (HU) for the pulmonary trunk; 379 and 377 HU for the right and left main pulmonary arteries, respectively; and 346 and 364 HU for the right and left inferior pulmonary arteries, respectively. In all patients, subsegmental arteries were analyzed. There were streak artifacts from contrast material in the superior vena cava in all patients. However, those artifacts did not impair the image analysis. Conclusion: Our findings suggest that pulmonary angiography using 64-MDCT with 50 mL of iodinated contrast can produce high quality images in unselected patient populations.

A survey on coverage path planning for robotics

Coverage Path Planning (CPP) is the task of determining a path that passes over all points of an area or volume of interest while avoiding obstacles. This task is integral to many robotic applications, such as vacuum cleaning robots, painter robots, autonomous underwater vehicles creating image mosaics, demining robots, lawn mowers, automated harvesters, window cleaners and inspection of complex structures, just to name a few. A considerable body of research has addressed the CPP problem. However, no updated surveys on CPP reflecting recent advances in the field have been presented in the past ten years. In this paper, we present a review of the most successful CPP methods, focusing on the achievements made in the past decade. Furthermore, we discuss reported field applications of the described CPP methods. This work aims to become a starting point for researchers who are initiating their endeavors in CPP. Likewise, this work aims to present a comprehensive review of the recent breakthroughs in the field, providing links to the most interesting and successful works

Simvastatin assay and dissolution studies by feasible RP-HPLC in tablets

Commonly used HPLC acetonitrile solvent has been through a worldwide shortage with a cost increase in 2008 and 2009. In order to get around this situation, a method by RP-HPLC employing methanol and aqueous acid mobile phase was developed and validated to evaluate simvastatin. The quality control assay and dissolution studies of this lipid-lowering drug were performed in diluents methanol and 0.01 M phosphate buffer with 0.5% SDS, pH 7, respectively. Dissolution test aliquots did not go through sample treatment, as described in USP SIM tablets monograph by ultraviolet spectrophotometry. The proposed method is fast, simple, feasible and robust.

Isolated liver gunshot injuries: nonoperative management is feasible?

ABSTRACTObjective:to evaluate the safety and effectiveness of non-operative management (NOM) of liver injury, being the only abdominal injury, from gunshot wounds to the abdomen.Methods:patients who had liver damage diagnosed as single abdominal injury caused by PAF in the right thoracoabdominal region, hemodynamically stable were studied. All underwent examination with computed tomography. Were analyzed: age, gender, levels of trauma, hemodynamic condition and the abdominal examination on admission, the results of the CT scan, the extra-abdominal lesions found, the serum levels of hemoglobin, clinical course, complications, length of hospital stay, outpatient treatment and death.Results:during the study period 169 patients, treated non-operatively, presented liver gunshot wounds. Of these, only 28 patients (16.6%) had liver injury as the only abdominal injury and consequently met the inclusion criteria for this study. The average age was 27.7 years and 25 patients (89.2%) were male. The overall average of verified trauma scores were: RTS 7.45, ISS 10.9, and TRISS 98.7%. The most frequent injuries were grade II and grade III (85.7%). Complications occurred in only one patient who presented a progressive decline in hemoglobin. He underwent a CT scan which showed blush in the liver parenchyma. An arteriography was performed, which showed a successfully embolized arteriovenous fistula. There were no deaths in the patient sample. The average hospital stay was 5.3 days.Conclusion:isolated hepatic injury in gunshot abdominal trauma is uncommon. However, the NOM protocol for this type of injury is safe and has low morbidity. This approach should only be followed in institutions with adequate infrastructure, where an experienced and cohesive team is able to follow a specific protocol, with rigorous periodic evaluation of its results.

The requirements of a feasible plastic packaging material for cultured dairy products

The objective of this Master´s Thesis was to conduct a wide scale preliminary survey regarding the package requirements of a cultured dairy package, and to compare the currently used material polystyrene to other suitable packaging materials. Polystyrene has a long history of use in dairy cups, but in recent years its price has increased significantly compared to other common packaging materials. The overall environmental effects of a package and a package material are today a part of designing a sustainable product life cycle. In addition, in certain contexts there has been discussion of the risks posed by styrene polymer for the environment and for humans. These risks are also discussed in this thesis. Polystyrene (PS) is still the most widely used material in dairy cups. In recent years, polypropylene (PP) cups have appeared in increasing numbers on market shelves. This study focuses on the differences of the suitable polymers and examines the suitability of alternative “suitable” polymers with regards to dairy packaging. Aside from focusing on the cup manufacturer, this thesis also examines its subject matter from the viewpoint of the dairy customer, as well as observing the concrete implications of material changes in the overall value chain. It was known in advance that material permeability would be one of the determining factors and that gas transmission testing would be a significant part of the thesis. Mechanical tests were the second part of the testing process, providing information regarding package strength and protectiveness during the package’s life cycle. Production efficiency, along with uninterrupted stable production, was another important factor that was taken into consideration. These two issues are sometimes neglected in similar contexts due to their self-evident nature. In addition, materials used in production may have a surprising significance to the production and efficiency. Consistent high quality is also partly based on material selection. All of the aforementioned factors have been documented and the results have been analyzed by the development team at Coveris Rigid Finland. Coveris is now calculating the total finance effects and capacities should the material changes be implemented in practice. There are many factors in favor of switching to polypropylene at the moment. The overall production costs, as well as the environmental effects of resin production are the primary influences for said switch from the converters’ perspective.

Simulation of the Interaction Mean Free Path between Neutrons and TRISO Particles

The interaction mean free path between neutrons and TRISO particles is simulated using scripts written in MATLAB to solve the increasing error present with an increase in the packing factor in the reactor physics code Serpent. Their movement is tracked both in an unbounded and in a bounded space. Their track is calculated, depending on the program, linearly directly using the position vectors of the neutrons and the surface equations of all the fuel particles; by dividing the space in multiple subspaces, each of which contain a fraction of the total number of particles, and choosing the particles from those subspaces through which the neutron passes through; or by choosing the particles that lie within an infinite cylinder formed on the movement axis of the neutron. The estimate from the current analytical model, based on an exponential distribution, for the mean free path, utilized by Serpent, is used as a reference result. The results from the implicit model in Serpent imply a too long mean free path with high packing factors. The received results support this observation by producing, with a packing factor of 17 %, approximately 2.46 % shorter mean free path compared to the reference model. This is supported by the packing factor experienced by the neutron, the simulation of which resulted in a 17.29 % packing factor. It was also observed that the neutrons leaving from the surfaces of the fuel particles, in contrast to those starting inside the moderator, do not follow the exponential distribution. The current model, as it is, is thus not valid in the determination of the free path lengths of the neutrons.

Harrod sob análise: path-dependence, tempo histórico e mudança estrutural endógena

Harrod under analysis: path-dependence, historic time and endogenous structural change. The article aims to demonstrate how the Harrod's approach (1937, 1938, 1948) can offer theoretical elements to form a complex, historicists and non-determinist view of the economic system. The relaxation of the constant warranty rate hypothesis make possible the system suffers endogenous qualitative change. It results in the notion of path-dependence and historic time. By the endogenization of the expectations and the existence of turn-points mechanisms, this approach allows a synthesis between non-convergency and economic regulation.

Path Analysis of Online Users Using Clickstream Da-ta: Case Online Magazine Website

This paper explores behavioral patterns of web users on an online magazine web-site. The goal of the study is to first find and visualize user paths within the data generated during collection, and to identify some generic behavioral typologies of user behavior. To form a theoretical foundation for processing data and identifying behavioral ar-chetypes, the study relies on established consumer behavior literature to propose typologies of behavior. For data processing, the study utilizes methodologies of ap-plied cluster analysis and sequential path analysis. Utilizing a dataset of click stream data generated from the real-life clicks of 250 ran-domly selected website visitors over a period of six weeks. Based on the data collect-ed, an exploratory method is followed in order to find and visualize generally occur-ring paths of users on the website. Six distinct behavioral typologies were recog-nized, with the dominant user consuming mainly blog content, as opposed to editori-al content. Most importantly, it was observed that approximately 80% of clicks were of the blog content category, meaning that the majority of web traffic occurring in the site takes place in content other than the desired editorial content pages. The out-come of the study is a set of managerial recommendations for each identified behavioral archetype.

The Path of Possibilities

by Ilan Averbuch presented to Brock in 1988.

Mackenzie Chown Path

Path running next to the Mackenzie Chown Complex.