New product development proficiency and multi-country product rollout timeliness

Purpose: The purpose of this paper is to address a gap in the understanding of the indirect effects of marketing and technical factors on time efficiency in developing a new product and international new product launch. Design/methodology/approach: This paper adopts a contingency perspective in examining the relationships between antecedents and on-time completion (or timeliness) of new product development (NPD) and international new product rollout (INPR). A conceptual framework is tested based on data obtained on 232 NPD projects undertaken by Korean firms. Findings: The results show that NPD proficiencies mediate to a greater or lesser extent the effects of key antecedents (e.g. cross-functional linkages, project fit with available marketing resources, and effective coordination of headquarters-subsidiary/agents' activities) on timeliness in NPD and INPR. Research limitations/implications: Empirical research on the role of marketing and technical proficiencies in improving NPD timeliness and rollout timeliness in the context of international NPD affirms the importance of adopting a contingency perspective in examining the antecedents of NPD and multi-market entry timeliness. Practical implications: This paper lends insight into the role of overseas subsidiaries or agents in helping to build the technical proficiencies of emerging country companies. Originality/value: This is the first review focusing on the mediating influences on time dimensions (e.g. timeliness) in multi-country product launches. © Emerald Group Publishing Limited.

Hur ett tvärfunktionellt samarbete kan motverka stuprörsstrukturer : Kommunikationens roll i det organisatoriska gränssnittet mellan olika avdelningar

Stovepipes, or also called silos, appear in many different organizations and sectors and contribute to problems when employees or managers tend to look more to their own, or the individual departments, objectives rather than to the organizations. The purpose of this study was to identify different communicative factors that promote stovepipes in order to further identify the most critical factor to disarm. A case study has been done at a selected company, with a stovepipe structure, in order to achieve the purpose of the study. The case study has included interviews and observations to identify different problem areas which then have been compared with three communicative factors identified in previous studies. The factor that had the most connections to the problem areas have been considered the most critical factor. The result of the study indicates that “A lack of understanding each other's work” is the most critical factor in stovepipe structures and that it can be prevented by following five recommendations: bring up positive collaboration continually, raise problems with each other instead of with others, identify different communication paths in and between the departments, implement a long-term model for preventing stovepipes and set up workshops between the involved departments. The conclusion of the study is that stovepipes create several undesirable effects in the organization but that the efforts to counter these problems do not have to be complicated. Following five small steps into a better collaboration and communication can be enough to be on your way to a better organizational structure.

Coordination in humanitarian logistics through clusters

Purpose – In the field of humanitarianism, cluster thinking has been suggested as a solution to the lack of coordinated disaster response. Clusters for diverse functions, including sheltering, logistics and water and sanitation, can be viewed as an effort to achieve functional coordination. The purpose of this paper is to contribute to a greater understanding of the potential of cluster concepts using supply chain coordination and inter‐cluster coordination. The focus is on the conceptual level rather than on specific means of coordination. Design/methodology/approach – The cluster concept in humanitarian relief, along with some key empirical issues, is based on a case study. The concept is then compared to the literature on clusters and coordination in order to develop a theoretical framework with propositions on the tradeoffs between different types of coordination. Findings – The results provide important reflections on one of the major trends in contemporary development of humanitarian logistics. This paper shows that there is a tradeoff between different types of coordination, with horizontal coordination inside cluster drawing attention away from important issues of the supply chain as well as the need to coordinate among the clusters. Research limitations/implications – There is a need for more in‐depth case studies of experiences with clusters in various operations. Various perspectives should be taken into account, including the field, responding agencies, beneficiaries, donors, military and commercial service providers, both during and between disasters. Practical implications – The paper presents the tradeoffs between different types of coordination, in which basic aims such as standardisation through functional coordination, must be balanced with cross‐functional and vertical coordination in order to more successfully serve the users' composite needs. Originality/value – The focus on possible trade‐offs between different types of coordination is an important complement to the literature, which often assumes simultaneous high degrees of horizontal and vertical coordination.

Team characteristics beneficial for Open Innovation projects

This study discusses the importance of creating Open Innovation (OI) teams for optimizing costs of Research and Development (R&D), dividing risks and maximizing profits. The purpose of this study is to determine team characteristics beneficial for successful OI project, with the emphasis on the fact that such teams are formed of professionals belonging to different organizations, both private and state-owned, with different educational and professional backgrounds and personal qualities. This purpose is supported by three sub-objectives: to observe the phenomenon of OI and its implementation in emerging economies, particularly in Russia; to specify professional and personal competencies of OI team members essential for the successful collaboration; and to identify the role of the leader in OI teams. The theoretical part of this study consists of knowledge from academic literature related to OI, cross-functional and innovation teams and leadership in innovation. The practical part of the study is presented in the form of multiple case study, and the empirical research is based on six semistructured interviews collected in October 2014 from the CEOs, Innovation Managers and Technical Directors of innovation companies participating actively in OI projects. The findings of the study demonstrate that many of the necessary competencies are equal for innovation or cross-functional teams and OI teams, such as professionalism and communication skills. However, due to the specific nature of OI, additional personal characteristics were recognized as beneficial for OI teams, such as flexibility, empathy and success-orientation. The role of the leader is also considered as a critical success factor for OI teams, with the emphasis on flexibility and autonomy. The findings of the study contribute to understanding the connection between notions of team member, team climate and team leader, and its influence on OI project success. Thus, the main purpose of the study is providing support for existing knowledge on OI teams and developing new insights into this newly emerged topic.

Increasing value add in white collar work using lean methods

The efficient indirect office work brings competitive advantage for companies in a rapidly changing business environment. The direct work methods in factory floors have been developed already for decades, but the office work is an area where the potential to improve the value add has not been studied and utilized systematically so far. The first objective of the thesis work is to find useful method for identifying and managing value add using literature. The usefulness of the method is validated in the case company`s environment. The second objective of the work is to understand what kind of effort is required to create more efficient target setting for the white collar employees. The operative level targets should be linked more tightly to the company strategy. Lean methods are selected as a tool for the improvement, since they are widely used in all kinds of industries and they are already familiar in other functions in the case company. Based on the literature review, suitable improvement methods are selected. The core of the lean is to identify the value add of a customer and eliminate the waste. Also visual control, cross functional work team, flow office and continuous improvement are used. The methods are tested in one production line and the results and feedback indicate that methods are useful in the studied environment.

Bertso eguna 2016: bertso-ikuskizuna eta genero-ikuspegia

[EUS] Gradu Amaierako Lan honetan esparru hauek uztartu dira: bertsolaritza, hedabideak eta Genero Ikasketak. Hiru esparru horien bidegurutzean, 2016ko Bertso Egunaren genero-irakurketa bat egitea du helburu ikerlanak. Genero-azterketa egiteko, bertso-emanaldiaren hiru alderdi nagusi aztertu dira: batetik, antolakuntzak hartutako erabakiak aztertu dira; bestetik, bertsolarien bertso-jardunaren inguruko gogoeta egin da; eta azkenik, EITBk eginiko ikus-entzunezko ekoizpena izan da hizpide. Alderdi horien analisia egiteko lau urrats nagusi egin dira: lehenik, Bertso Egunaren inguruko dokumentazio-lana osatu da; bigarrenik, bertso-egoeren, bertso-jardunaren, eta ikus-entzunezkoaren deskripzioa egin da; hirugarrenik, deskripzioan xehaturiko ezaugarrien interpretazioa egin da, atalez atal; eta laugarrenik, atal guztien ezaugarriak kontuan harturik, ondorio orokor zenbait garatu dira.

Carbon Nexus at Deakin University: a globally unique carbon fiber and composite research facility in Australia

Carbon Nexus, the new cutting-edge open-access carbon fiber and composites research facility at Deakin University, recently commenced operations. The two carbon fiber processing lines are allowing researchers to investigate new methods for manufacturing carbon fiber which can lower energy inputs, maximise output, and increase fiber performance. The lines are also enabling industrial partners to validate new technologies at industrial scale. With a focused research program driven by a cross-functional research team, Carbon Nexus aims to reduce the cost of producing carbon fiber and increase the rate of manufacturing composite parts.

Implementation of dual stack technique for reducing leakage and dynamic power

This paper deals with proposal of a new dual stack approach for reducing both leakage and dynamic powers. The development of digital integrated circuits is challenged by higher power consumption. Thecombination of higher clock speeds, greater functional integration, and smaller process geometries has contributed to significant growth in power density. Scaling improves transistor density and functionality ona chip. Scaling helps to increase speed and frequency of operation and hence higher performance. As voltages scale downward with the geometries threshold voltages must also decrease to gain the performance advantages of the new technology but leakage current increases exponentially. Today leakage power has become anincreasingly important issue in processor hardware and software design. It can be used in various applications like digital VLSI clocking system, buffers, registers, microprocessors etc. The leakage power increases astechnology is scaled down. In this paper, we propose a new dual stack approach for reducing both leakage and dynamic powers. Moreover, the novel dual stack approach shows the least speed power product whencompared to the existing methods. All well known approach is “Sleep” in this method we reduce leakage power. The proposed Dual Stack approach we reduce more power leakage. Dual Stack approach uses theadvantage of using the two extra pull-up and two extra pull-down transistors in sleep mode either in OFF state or in ON state. Since the Dual Stack portion can be made common to all logic circuitry, less number of transistors is needed to apply a certain logic circuit.The dual stack approach shows the least speed power product among all methods. The Dual Stack technique provides new ways to designers who require ultra-low leakage power consumption with much less speedpower product.

Estimating total cross sections from neutron-nucleus collisions using a simple functional form

Total cross sections for neutron scattering from nuclei, with energies ranging from 10 to 600 MeV and from many nuclei spanning the mass range 6Li to 238U, have been analyzed using a simple, three-parameter, functional form. The calculated cross sections are compared with results obtained by using microscopic (g-folding) optical potentials as well as with experimental data. The functional form reproduces those total cross sections very well. When allowance is made for Ramsauer-like effects in the scattering, the parameters of the functional form required vary smoothly with energy and target mass. They too can be represented by functions of energy and mass.

Foot pain and functional limitation in healthy adults with hallux valgus : a cross-sectional study

Background Hallux valgus (HV) is a very common deformity of the first metatarsophalangeal joint that often requires surgical correction. However, the association between structural HV deformity and related foot pain and disability is unclear. Furthermore, no previous studies have investigated concerns about appearance and difficulty with footwear in a population with HV not seeking surgical correction. The aim of this cross-sectional study was to investigate foot pain, functional limitation, concern about appearance and difficulty with footwear in otherwise healthy adults with HV compared to controls. Methods Thirty volunteers with HV (radiographic HV angle >15 degrees) and 30 matched controls were recruited for this study (50 women, 10 men; mean age 44.4 years, range 20 to 76 years). Differences between groups were examined for self-reported foot pain and disability, satisfaction with appearance, footwear difficulty, and pressure-pain threshold at the first metatarsophalangeal joint. Functional measures included balance tests, walking performance, and hallux muscle strength (abduction and plantarflexion). Mean differences (MD) and 95% confidence intervals (CI) were calculated. Results All self-report measures showed that HV was associated with higher levels of foot pain and disability and significant concerns about appearance and footwear (p < 0.001). Lower pressure-pain threshold was measured at the medial first metatarsophalangeal joint in participants with HV (MD = -133.3 kPa, CI: -251.5 to -15.1). Participants with HV also showed reduced hallux plantarflexion strength (MD = -37.1 N, CI: -55.4 to -18.8) and abduction strength (MD = -9.8 N, CI: -15.6 to -4.0), and increased mediolateral sway when standing with both feet with eyes closed (MD = 0.34 cm, CI: 0.04 to 0.63). Conclusions These findings show that HV negatively impacts on self-reported foot pain and function, and concerns about foot appearance and footwear in otherwise healthy adults. There was also evidence of impaired hallux muscle strength and increased postural sway in HV subjects compared to controls, although general physical functioning and participation in physical activity were not adversely affected.

Cross cultural adaptation and validation of a Spanish version of the lower limb functional index

Background: The Lower Limb Functional Index (LLFI) is a relatively recently published regional outcome measure. The development article showed the LLFI had robust and valid clinimetric properties with sound psychometric and practical characteristics when compared to the Lower Limb Extremity Scale (LEFS) criterion standard. Objective: The purpose of this study was cross cultural adaptation and validation of the LLFI Spanish-version (LLFI-Sp) in a Spanish population. Methods: A two stage observational study was conducted. The LLFI was initially cross-culturally adapted to Spanish through double forward and single backward translation; then subsequently validated for the psychometric characteristics of validity, internal consistency, reliability, error score and factor structure. Participants (n = 136) with various lower limb conditions of >12 weeks duration completed the LLFI-Sp, Western Ontario and McMaster University Osteoarthritis Index (WOMAC) and the Euroqol Health Questionnaire 5 Dimensions (EQ-5D-3 L). The full sample was employed to determine internal consistency, concurrent criterion validity, construct validity and factor structure; a subgroup (n = 45) determined reliability at seven days concurrently completing a global rating of change scale. Results: The LLFI-Sp demonstrated high but not excessive internal consistency (α = 0.91) and high reliability (ICC = 0.96). The factor structure was one-dimensional which supported the construct validity. Criterion validity with the WOMAC was strong (r = 0.77) and with the EQ-5D-3 L fair and inversely correlated (r = -0.62). The study limitations included the lack of longitudinal data and the determination of responsiveness. Conclusions: The LLFI-Sp supports the findings of the original English version as being a valid lower limb regional outcome measure. It demonstrated similar psychometric properties for internal consistency, validity, reliability, error score and factor structure.

Cross-cultural adaptation, reliability and validity of the Spanish version of the upper limb functional index

Background The Upper Limb Functional Index (ULFI) is an internationally widely used outcome measure with robust, valid psychometric properties. The purpose of study is to develop and validate a ULFI Spanish-version (ULFI-Sp). Methods A two stage observational study was conducted. The ULFI was cross-culturally adapted to Spanish through double forward and backward translations, the psychometric properties were then validated. Participants (n = 126) with various upper limb conditions of >12 weeks duration completed the ULFI-Sp, QuickDASH and the Euroqol Health Questionnaire 5 Dimensions (EQ-5D-3 L). The full sample determined internal consistency, concurrent criterion validity, construct validity and factor structure; a subgroup (n = 35) determined reliability at seven days. Results The ULFI-Sp demonstrated high internal consistency (α = 0.94) and reliability (r = 0.93). Factor structure was one-dimensional and supported construct validity. Criterion validity with the EQ-5D-3 L was fair and inversely correlated (r = −0.59). The QuickDASH data was unavailable for analysis due to excessive missing responses. Conclusions The ULFI-Sp is a valid upper limb outcome measure with similar psychometric properties to the English language version.

Touch, grasp, deliver and control : functional cross-talk between microtubules and cell adhesions

Cross-talk between microtubule networks and sites of cell-matrix and cell-cell adhesion has profound impact on these structures and is essential for proper cell organization, polarization and motility. Components of adhesion sites can interact directly with microtubules or with proteins that specifically associate with microtubule plus ends and minus ends and in this way capture, stabilize or destabilize microtubules. In their turn, microtubules can serve as routes for delivery of structural and regulatory factors that control adhesion site turnover. In addition, the microtubule lattice or growing microtubule plus ends can serve as diffusional sinks that accumulate and scaffold regulatory molecules, thereby affecting their activity in the vicinity of adhesions. Combination of these mechanisms underlies the functional co-operation between microtubules and adhesion sites and defines their dynamic behavior.

Cross-cultural adaptation, reliability and validity of the Turkish version of the spine functional index

Background The Spine Functional Index (SFI) is a patient reported outcome measure with sound clinimetric properties and clinical viability for the determination of whole-spine impairment. To date, no validated Turkish version is available. The purpose of this study is to cross-culturally adapted the SFI for Turkish-speaking patients (SFI-Tk) and determine the psychometric properties of reliability, validity and factor structure in a Turkish population with spine musculoskeletal disorders. Methods The SFI English version was culturally adapted and translated into Turkish using a double forward and backward method according to established guidelines. Patients (n = 285, cervical = l29, lumbar = 151, cervical and lumbar region = 5, 73% female, age 45 ± 1) with spine musculoskeletal disorders completed the SFI-Tk at baseline and after a seven day period for test-retest reliability. For criterion validity the Turkish version of the Functional Rating Index (FRI) was used plus the Neck Disability Index (NDI) for cervical patients and the Oswestry Disability Index (ODI) for back patients. Additional psychometric properties were determined for internal consistency (Chronbach’s α), criterion validity and factor structure. Results There was a high degree of internal consistency (α = 0.85, item range 0.80-0.88) and test-retest reliability (r = 0.93, item range = 0.75-0.95). The factor analysis demonstrated a one-factor solution explaining 24.2% of total variance. Criterion validity with the ODI was high (r = 0.71, p < 0.001) while the FRI and NDI were fair (r = 0.52 and r = 0.58, respectively). The SFI-Tk showed no missing responses with the ‘half-mark’ option used in 11.75% of total responses by 77.9% of participants. Measurement error from SEM and MDC90 were respectively 2.96% and 7.12%. Conclusions The SFI-Tk demonstrated a one-factor solution and is a reliable and valid instrument. The SFI-Tk consists of simple and easily understood wording and may be used to assess spine region musculoskeletal disorders in Turkish speaking patients.

Comparison of kinematic variables obtained by inertial sensors among stroke survivors and healthy older adults in the Functional Reach Test: cross-sectional study

Background Balance dysfunction is one of the most common problems in people who suffer stroke. To parameterize functional tests standardized by inertial sensors have been promoted in applied medicine. The aim of this study was to compare the kinematic variables of the Functional Reach Test (FRT) obtained by two inertial sensors placed on the trunk and lumbar region between stroke survivors (SS) and healthy older adults (HOA) and to analyze the reliability of the kinematic measurements obtained. Methods Cross-sectional study. Five SS and five HOA over 65. A descriptive analysis of the average range as well as all kinematic variables recorded was developed. The intrasubject and intersubject reliability of the measured variables was directly calculated. Results In the same intervals, the angular displacement was greater in the HOA group; however, they were completed at similar times for both groups, and HOA conducted the test at a higher speed and greater acceleration in each of the intervals. The SS values were higher than HOA values in the maximum and minimum acceleration in the trunk and in the lumbar region. Conclusions The SS show less functional reach, a narrower, slower and less accelerated movement during the FRT execution, but with higher peaks of acceleration and speed when they are compared with HOA.