Dancing to too many tunes : contemporary course design in teacher education

Contemporary course designers in schools and faculties of Education are finding themselves dancing to many tunes, arguably too many tunes, in order to have their initial teacher education courses accredited by external agencies whilst satisfying internal approval processes and, critically, maintaining the philosophical integrity of their programs and their institutional watermarks. The “tunes” here are the agendas driven by and the demands made by distinct independent agencies. The external agencies influencing Education include: TEQSA (Tertiary Education Quality and Standards Agency) which will assure alignment to the AQF (Australian Qualifications Framework); professional bodies such as AITSL (Australian Institute for Teaching and School Leadership) which now accredits all pre-service teacher Education courses across Australia and assures alignment with the Australian Professional Standards for Teachers; and the state and territory regulatory authorities that have an impact within a specific jurisdiction, for example, the Queensland College of Teachers (QCT) and the Teacher Registration Board of Western Australia (TRBWA). This paper – whose findings have been arrived at through a year-long OLT National Teaching Fellowship - will outline the complex and competing agendas currently at play and focus on the disjuncture evident in the fundamental defining of who is a “graduate.” It will also attempt to identify where there are synergies between the complex demands being made. It will argue that there are too many “tunes” and the task of finding a balance between compliance and delivering effective initial teacher education may not be possible because of the cacophony of their conflicting demands.

Ship Motion Control : Course Keeping and Roll Stabilisation Using Rudder and Fins

Motion control systems have a significant impact on the performance of ships and marine structures allowing them to perform tasks in severe sea states and during long periods of time. Ships are designed to operate with adequate reliability and economy, and in order to achieve this, it is essential to control the motion. For each type of ship and operation performed (transit, landing a helicopter, fishing, deploying and recovering loads, etc.), there are not only desired motion settings, but also limits on the acceptable (undesired) motion induced by the environment. The task of a ship motion control system is therefore to act on the ship so it follows the desired motion as closely as possible. This book provides an introduction to the field of ship motion control by studying the control system designs for course-keeping autopilots with rudder roll stabilisation and integrated rudder-fin roll stabilisation. These particular designs provide a good overview of the difficulties encountered by designers of ship motion control systems and, therefore, serve well as an example driven introduction to the field. The idea of combining the control design of autopilots with that of fin roll stabilisers, and the idea of using rudder induced roll motion as a sole source of roll stabilisation seems to have emerged in the late 1960s. Since that time, these control designs have been the subject of continuous and ongoing research. This ongoing interest is a consequence of the significant bearing that the control strategy has on the performance and the issues associated with control system design. The challenges of these designs lie in devising a control strategy to address the following issues: underactuation, disturbance rejection with a non minimum phase system, input and output constraints, model uncertainty, and large unmeasured stochastic disturbances. To date, the majority of the work reported in the literature has focused strongly on some of the design issues whereas the remaining issues have been addressed using ad hoc approaches. This has provided an additional motivation for revisiting these control designs and looking at the benefits of applying a contemporary design framework, which can potentially address the majority of the design issues.

Teaching fractions to adult learners enrolled in a civil construction course : knowledge, action and materials action in tandem

This paper investigates the teaching and learning of fractions to Indigenous adult learners in a Civil Construction Certificate Course. More specifically it explores why the use of materials is critical to building knowledge and understanding. This focus is important for two reasons. First, it allows for considerations of a trainer’s approach for teaching fractions and, second it provides insights into how adult learners can be supported with representing their practical experiences of fractions to make generalisation thus building on their knowledge and learning experiences. The paper draws on teaching episodes from an Australian Research Council funded Linkage project that investigates how mathematics is taught and learned in Certificate Courses, here, Certificate 11 in Civil Construction. Action research and decolonising methods (Smith, 1999) were used to conduct the research. Video excerpts which feature one trainer and three students are analysed and described. Findings from the data indicate that adult learners need to be supported with materials to assist with building their capacity to know and apply understandings of fractions in a range of contexts, besides construction. Without materials and where fractions are taught via pen and paper tasks, students are less likely to retain and apply fraction ideas to their Certificate Course. Further they are less likely to understand decimals because of limited understanding of fractions.

A 5- versus 3-day course of oral corticosteroids for children with asthma exacerbations who are not hospitalised : a randomised controlled trial

Objective To determine whether a 5-day course of oral prednisolone is superior to a 3-day course in reducing the 2-week morbidity of children with asthma exacerbations who are not hospitalised. Design, setting and participants Double-blind randomised controlled trial of asthma outcomes following a 5-day course of oral prednisolone (1 mg/kg) compared with a 3-day course of prednisolone plus placebo for 2 days. Participants were children aged 2–15 years who presented to the emergency departments of three Queensland hospitals between March 2004 and February 2007 with an acute exacerbation of asthma, but were not hospitalised. Sample size was defined a priori for a study power of 90%. Main outcome measures Difference in proportion of children who were symptom-free at Day 7, as measured by intention-to-treat (ITT) and per-protocol analysis; quality of life (QOL) on Days 7 and 14. Results 201 children were enrolled, and there was an 82% completion rate. There was no difference between groups in the proportion of children who were symptom-free (observed difference, 0.04 [95% CI, − 0.09 to 0.18] by ITT analysis; 0.04 [95% CI, − 0.17 to 0.09] by per-protocol analysis). There was also no difference between groups in QOL (P = 0.42). The difference between groups for the primary outcome was within the equivalence range calculated post priori. Conclusion A 5-day course of oral prednisolone confers no advantage over a 3-day course for children with asthma exacerbations who are not hospitalised.

Time course analysis of hypoxia, granulation tissue and blood vessel growth, and remodeling in healing rat cutaneous incisional primary intention wounds

Hypoxia and the development and remodeling of blood vessels and connective tissue in granulation tissue that forms in a wound gap following full-thickness skin incision in the rat were examined as a function of time. A 1.5 cm-long incisional wound was created in rat groin skin and the opposed edges sutured together. Wounds were harvested between 3 days and 16 weeks and hypoxia, percent vascular volume, cell proliferation and apoptosis, α-smooth muscle actin, vascular endothelial growth factor-A, vascular endothelial growth factor receptor-2, and transforming growth factor-β 1 expression in granulation tissue were then assessed. Hypoxia was evident between 3 and 7 days while maximal cell proliferation at 3 days (123.6 ± 22.2 cells/mm 2, p < 0.001 when compared with normal skin) preceded the peak percent vascular volume that occurred at 7 days (15.83 ± 1.10%, p < 0.001 when compared with normal skin). The peak in cell apoptosis occurred at 3 weeks (12.1 ± 1.3 cells/mm 2, p < 0.001 when compared with normal skin). Intense α-smooth muscle actin labeling in myofibroblasts was evident at 7 and 10 days. Vascular endothelial growth factor receptor-2 and vascular endothelial growth factor-A were detectable until 2 and 3 weeks, respectively, while transforming growth factor-β 1 protein was detectable in endothelial cells and myofibroblasts until 3-4 weeks and in the extracellular matrix for 16 weeks. Incisional wound granulation tissue largely developed within 3-7 days in the presence of hypoxia. Remodeling, marked by a decline in the percent vascular volume and increased cellular apoptosis, occurred largely in the absence of detectable hypoxia. The expression of vascular endothelial growth factor-A, vascular endothelial growth factor receptor-2, and transforming growth factor-β 1 is evident prior, during, and after the peak of vascular volume reflecting multiple roles for these factors during wound healing.

Personal injuries sustained in the course of employment - claim against employer under Workcover Queensland Act 1996

In Devlin v South Mole Island Resort [2003] QSC 020 the Court concluded the applicant was entitled to pursue a concurrent claim he alleged he had against the respondent under the Personal Injuries Proceedings Act 2002 in respect of injuries sustained in the course of employment, and also that the Workcover Queensland Act 1996 did not abolish the applicant's right to proceed against the respondent.

Course experiences, satisfaction and career intent of final year pre-registration Australian pharmacy students

Background In Australia, the profession of pharmacy has undergone many changes to adapt to the needs of the community. In recent years, concerns have been raised with evidence emerging of workforce saturation in traditional pharmacy practice sectors. It is not known how current final year pharmacy students’ perceive the different pharmacy career paths in this changing environment. Hence investigating students’ current experiences with their pharmacy course, interaction with the profession and developing an understanding of their career intentions would be an important step, as these students would make up a large proportion of future pharmacy workforce Objective The objective of this study was thus to investigate final year students’ career perspectives and the reasons for choosing pharmacy, satisfaction with this choice of pharmacy as a tertiary course and a possible future career, factors affecting satisfaction and intention of future career paths. Methods A quantitative cross sectional survey of final year students from 3 Australian universities followed by a qualitative semi-structured interview of a convenience sample of final year students from the University of Sydney. Results ‘Interest in health and medicine’ was the most important reason for choosing pharmacy (n=238). The majority of students were ‘somewhat satisfied’ with the choice of pharmacy (35.7%) as a course and possible future career. Positive associations were found between satisfaction and reasons for joining pharmacy such as ‘felt pharmacy is a good profession’ (p=0.003) while negative associations included ‘joined pharmacy as a gateway to medicine or dentistry’ (p=0.001). Quantitate and qualitative results showed the most frequent perception of community pharmacy was ‘changing’ while hospital and pharmaceutical industry was described as ‘competitive’ and ‘research’ respectively. The highest career intention was community followed by hospital pharmacy. Conclusion Complex factors including university experiences are involved in shaping students’ satisfaction and perception of career. This may relate to challenges in the community pharmacy sector, job opportunities in hospital and limited understanding of the pharmaceutical industry. The results offer insight for the profession in terms of entry into various roles and also to pharmacy educators for their roles in shaping curricula and placement experiences that attract future graduates to defined career pathways in pharmacy.

Course quality assurance at a glance

From 2014, QUT will be adopting a life-cycle approach to Course Quality Assurance informed by a wider and richer range of historic, ‘live’ and ‘predictive’ course data. Key data elements continue to be grouped according to the three broad categories – Viability, Quality of Learning Environment and Outcomes – and are further supported with analytic data presented within tables and charts. Course Quality Assurance and this Consolidated Courses Performance Report illuminate aspects of courses from a data evidence base highlighting the strengths and weaknesses of our courses. It provides the framework and tools to achieve QUT's commitment to excellent graduate outcomes by drawing attention and focus to the quality of our courses and providing a structured approach for bringing about change. Our portfolio of courses forms a vital part of QUT, generating almost $600 million in 2013 alone. Real world courses are fundamental to the strength of the Institution; they are what our many thousands of current and future students are drawn to and invest their time and aspirations in. As we move through a period of some regulatory and deregulatory uncertainty, there is a greater need for QUT to monitor and respond to the needs and expectations of our students. The life-cycle approach, with its rich and predicative data, provides the best source of evidence we have had, to date, to assure the quality of our courses and their relevance in a rapidly changing higher education context.

Course evaluation : reconfigurations for learning with learning management systems

The introduction of online delivery platforms such as learning management systems (LMS) in tertiary education has changed the methods and modes of curriculum delivery and communication. While course evaluation methods have also changed from paper-based in-class-administered methods to largely online-administered methods, the data collection instruments have remained unchanged. This paper reports on a small exploratory study of two tertiary-level courses. The study investigated why design of the instruments and methods to administer surveys in the courses are ineffective measures against the intrinsic characteristics of online learning. It reviewed the students' response rates of the conventional evaluations for the courses over an eight-year period. It then compared a newly developed online evaluation and the conventional methods over a two-year period. The results showed the response rates with the new evaluation method increased by more than 80% from the average of the conventional evaluations (below 30%), and the students' written feedback was more detailed and comprehensive than in the conventional evaluations. The study demonstrated the possibility that the LMS-based learning evaluation can be effective and efficient in terms of the quality of students' participation and engagement in their learning, and for an integrated pedagogical approach in an online learning environment.

Renewing the Sustainable Energy Curriculum : Curriculum Frameworks and Guidance for Course Delivery

This guide is to support institutions in developing and teaching tertiary level programmes for sustainable energy professionals. Ongoing curriculum renewal is more difficult but vital for multidisciplinary courses preparing graduates to work in a specialised rapidly changing field. After more than 15 years of offering tertiary level “sustainable energy” qualifications in Australian Universities there was a clear need to assess how these courses are taught and develop curriculum frameworks to guide Universities designing/redesigning programs and courses to provide graduates with the relevant skills, knowledge and attributes (capabilities) seen by graduates and employers as required to work in this rapidly changing field. This guide presents the sustainable energy curriculum frameworks developed by the “Renewing the sustainable energy curriculum – providing internationally relevant skills for a carbon constrained economy” project, which was conducted over a two-and-a-quarter year period.

Review of the ACT Road Ready and Road Ready Plus Novice Driver Road Safety Education Course Material

This report documents research that was commissioned in order to review the materials used in the Road Ready program for relevancy and acceptability to the target audiences as part of the implementation of the ACT Road Safety Strategy Action Plan. Relevant literature on young driver crash risk and best practice principles in driver education was reviewed as a first step (Section 2). The evidence for effectiveness of driver education programs in Australia was summarised (Section 3) and a separate review of the use of incentives in relation to driver education was performed. The brief called for an expert review of the materials and delivery design for both the Road Ready and Road Ready Plus programs. This is reported in Section 5, along with the overall recommendations for program improvement. More specific comments on individual modules in the Road Ready program are listed at the end of Section 5. Lastly, feedback from stakeholders, specifically the facilitators and teachers of the programs, as well as former students who have completed the Road Ready program, was sought. Interviews and surveys were conducted with these groups. Summaries of the methods and findings are contained in Section 6.

Australian Library and Information Association Course Accreditation Review 2013

This report has been prepared for the Australian Library and Information Association (ALIA) in response to the request to undertake a literature review and environmental scan to inform discussions of the issues associated with professional accreditation. ALIA is the peak body which develops and monitors the professional standards that ensure the high quality of graduates entering the library and information services (LIS) profession in Australia. The report presents a themed discussion of the issues identified in the literature review and environmental scan to build a full picture of the role of course accreditation in LIS education. This is set against developments in the wider context of quality assurance in Australian tertiary education, to analyse the implications of this changing environment for ALIA’s accreditation policies and ractices.

The influence of social media on international students' choice of university and course

This thesis is a qualitative study of the influence of social media on the university and course decision making process of international students. It examines the role of social media in influencing international students' decisions on course and university selection and the role of social media in meeting their information needs. It also gathered inputs on how universities could engage, collaborate and communicate using social media communities and channels for more effective recruitment strategies.