Stresses of a boat trailer

In this thesis work, a strength analysis is made for a boat trailer. The studied trailer structure is manufactured from Ruukki’s structural steel S420. The main focus in this work is in the trailer’s frame. The investigation process consists two main stages. These stages are strain gage measurements and finite elements analysis. Strain gage measurements were performed to the current boat trailer in February 2015. Static durability and fatigue life of the trailer are analyzed with finite element analysis and with two different materials. These materials are the current trailer material Ruukki’s structural steel S420 and new option material high strength precision tube Form 800. The main target by using high strength steel in a trailer is weight reduction. The applied fatigue analysis methods are effective notch stress and structural hot spot stress approaches. The target of these strength analyses is to determine if it is reasonable to change the trailer material to high strength steel. The static strengths of the S420 and Form 800 trailers is sufficient. The fatigue strength of the Form 800 trailer is considerably lower than the fatigue strength of the S420 trailer. For future research, the effect of hot dip galvanization to the high strength steel has to be investigated. The effect of hot dip galvanization to the trailer is investigated by laboratory tests that are not included in this thesis.

Linking community variables to parenting behaviours and youth risk behaviours

The puq)ose of this thesis is to test a model Hnking community disadvantage and urbanicity factors to parenting variables (i.e., monitoring, warmth, and knowledge) and to youth risk behavior (i.e., substance use and delinquency), measured both concurrently and one year after the assessment of parenting variables. The model builds on the work of Fletcher, Steinberg, and Williams-Wheeler (2004) but a) includes a more comprehensive measure of SES than that conceptualized by Fletcher et al.; b) considers whether the role of community disadvantage is indirectly as well as directly linked to youth risk behavior, by way of its association with parenting variables; c) considers whether level of community urbanicity plays a direct role in predicting both parenting variables and risk behaviors, or whether its influence on risk behaviours is primarily indirect through parenting variables. Both community disadvantage and urbanicity had virtually no relation to parenting and risk behaviour variables. Results found for relations of parenting variables and risk behaviour were similar to Fletcher et al. Although urban youth are typically perceived as being more at risk for substance use and delinquency, no evidence was found for a distinction between urban and rural youth within this sample. Targeting risk behaviour prevention/reduction programs toward only urban youth, therefore, is not supported by these findings.

Carboxydothermus hydrogenoformans comme catalyseur biologique pour la conversion du monoxyde de carbone en hydrogène simultanément a la minéralisation de calcium et phosphate

La gazéification est aujourd'hui l'une des stratégies les plus prometteuses pour valoriser les déchets en énergie. Cette technologie thermo-chimique permet une réduction de 95 % de la masse des intrants et génère des cendres inertes ainsi que du gaz de synthèse (syngaz). Le syngaz est un combustible gazeux composé principalement de monoxyde de carbone (CO), d'hydrogène (H2) et de dioxyde de carbone (CO2). Le syngaz peut être utilisé pour produire de la chaleur et de l'électricité. Il est également la pierre angulaire d'un grand nombre de produits à haute valeur ajoutée, allant de l'éthanol à l'ammoniac et l'hydrogène pur. Les applications en aval de la production de syngaz sont dictées par son pouvoir calorifique, lui-même dépendant de la teneur du gaz en H2. L’augmentation du contenu du syngaz en H2 est rendu possible par la conversion catalytique à la vapeur d’eau, largement répandu dans le cadre du reformage du méthane pour la production d'hydrogène. Au cours de cette réaction, le CO est converti en H2 et CO2 selon : CO + H2O → CO2 + H2. Ce processus est possible grâce à des catalyseurs métalliques mis en contact avec le CO et de la vapeur. La conversion catalytique à la vapeur d’eau a jusqu'ici été réservé pour de grandes installations industrielles car elle nécessite un capital et des charges d’exploitations très importantes. Par conséquent, les installations de plus petite échelle et traitant des intrants de faible qualité (biomasse, déchets, boues ...), n'ont pas accès à cette technologie. Ainsi, la seule utilisation de leur syngaz à faible pouvoir calorifique, est limitée à la génération de chaleur ou, tout au plus, d'électricité. Afin de permettre à ces installations une gamme d’application plus vaste de leurs syngaz, une alternative économique à base de catalyseur biologique est proposée par l’utilisation de bactéries hyperthermophiles hydrogénogènes. L'objectif de cette thèse est d'utiliser Carboxydothermus hydrogenoformans, une bactérie thermophile carboxydotrophe hydrogénogène comme catalyseur biologique pour la conversion du monoxyde de carbone en hydrogène. Pour cela, l’impact d'un phénomène de biominéralisation sur la production d’H2 a été étudié. Ensuite, la faisabilité et les limites de l’utilisation de la souche dans un bioréacteur ont été évaluées. Tout d'abord, la caractérisation de la phase inorganique prédominante lorsque C. hydrogenoformans est inoculé dans le milieu DSMZ, a révélé une biominéralisation de phosphate de calcium (CaP) cristallin en deux phases. L’analyse par diffraction des rayons X et spectrométrie infrarouge à transformée de Fourier de ce matériau biphasique indique une signature caractéristique de la Mg-whitlockite, alors que les images obtenues par microscopie électronique à transmission ont montré l'existence de nanotiges cristallines s’apparentant à de l’hydroxyapatite. Dans les deux cas, le mode de biominéralisation semble être biologiquement induit plutôt que contrôlé. L'impact du précipité de CaP endogène sur le transfert de masse du CO et la production d’H2 a ensuite été étudié. Les résultats ont été comparés aux valeurs obtenues dans un milieu où aucune précipitation n'est observée. Dans le milieu DSMZ, le KLa apparent (0.22 ± 0.005 min-1) et le rendement de production d’H2 (89.11 ± 6.69 %) étaient plus élevés que ceux obtenus avec le milieu modifié (0.19 ± 0.015 min-1 et 82.60 ± 3.62% respectivement). La présence du précipité n'a eu aucune incidence sur l'activité microbienne. En somme, le précipité de CaP offre une nouvelle stratégie pour améliorer les performances de transfert de masse du CO en utilisant les propriétés hydrophobes de gaz. En second lieu, la conversion du CO en H2 par la souche Carboxydothermus hydrogenoformans fut étudiée et optimisée dans un réacteur gazosiphon de 35 L. Parmi toutes les conditions opérationnelles, le paramètre majeur fut le ratio du débit de recirculation du gaz sur le débit d'alimentation en CO (QR:Qin). Ce ratio impacte à la fois l'activité biologique et le taux de transfert de masse gaz-liquide. En effet, au dessus d’un ratio de 40, les performances de conversion du CO en H2 sont limitées par l’activité biologique alors qu’en dessous, elles sont limitées par le transfert de masse. Cela se concrétise par une efficacité de conversion maximale de 90.4 ± 0.3 % et une activité spécifique de 2.7 ± 0.4 molCO·g–1VSS·d–1. Malgré des résultats prometteurs, les performances du bioréacteur ont été limitées par une faible densité cellulaire, typique de la croissance planctonique de C. hydrogenoformans. Cette limite est le facteur le plus contraignant pour des taux de charge de CO plus élevés. Ces performances ont été comparées à celles obtenues dans un réacteur à fibres creuses (BRFC) inoculé par la souche. En dépit d’une densité cellulaire et d’une activité volumétrique plus élevées, les performances du BRFC à tout le moins cinétiquement limitées quand elles n’étaient pas impactées par le transfert de masse, l'encrassement et le vieillissement de la membrane. Afin de parer à la dégénérescence de C. hydrogenoformans en cas de pénurie de CO, la croissance de la bactérie sur pyruvate en tant que seule source de carbone a été également caractérisée. Fait intéressant, en présence simultanée de pyruvate et de CO, C. hydrogenoformans n’a amorcé la consommation de pyruvate qu’une fois le CO épuisé. Cela a été attribué à un mécanisme d'inhibition du métabolisme du pyruvate par le CO, faisant ainsi du pyruvate le candidat idéal pour un système in situ de secours.

Whither RDS? An investigation of respondent driven sampling as a method of recruiting mainstream marijuana users.

Background: An important challenge in conducting social research of specific relevance to harm reduction programs is locating hidden populations of consumers of substances like cannabis who typically report few adverse or unwanted consequences of their use. Much of the deviant, pathologized perception of drug users is historically derived from, and empirically supported, by a research emphasis on gaining ready access to users in drug treatment or in prison populations with higher incidence of problems of dependence and misuse. Because they are less visible, responsible recreational users of illicit drugs have been more difficult to study. Methods: This article investigates Respondent Driven Sampling (RDS) as a method of recruiting experienced marijuana users representative of users in the general population. Based on sampling conducted in a multi-city study (Halifax, Montreal, Toronto, and Vancouver), and compared to samples gathered using other research methods, we assess the strengths and weaknesses of RDS recruitment as a means of gaining access to illicit substance users who experience few harmful consequences of their use. Demographic characteristics of the sample in Toronto are compared with those of users in a recent household survey and a pilot study of Toronto where the latter utilized nonrandom self-selection of respondents. Results: A modified approach to RDS was necessary to attain the target sample size in all four cities (i.e., 40 'users' from each site). The final sample in Toronto was largely similar, however, to marijuana users in a random household survey that was carried out in the same city. Whereas well-educated, married, whites and females in the survey were all somewhat overrepresented, the two samples, overall, were more alike than different with respect to economic status and employment. Furthermore, comparison with a self-selected sample suggests that (even modified) RDS recruitment is a cost-effective way of gathering respondents who are more representative of users in the general population than nonrandom methods of recruitment ordinarily produce. Conclusions: Research on marijuana use, and other forms of drug use hidden in the general population of adults, is important for informing and extending harm reduction beyond its current emphasis on 'at-risk' populations. Expanding harm reduction in a normalizing context, through innovative research on users often overlooked, further challenges assumptions about reducing harm through prohibition of drug use and urges consideration of alternative policies such as decriminalization and legal regulation.

Studies on grain refinement and alloying additions on the microstructure and mechanical properties of Mg-8Zn-4Al alloy

MAGNESIUM ALLOYS have strong potential for weight reduction in a wide range of technical applications because of their low density compared to other structural metallic materials. Therefore, an extensive growth of magnesium alloys usage in the automobile sector is expected in the coming years to enhance the fuel efficiency through mass reduction. The drawback associated with the use of commercially cheaper Mg-Al based alloys, such as AZ91, AM60 and AM50 are their inferior creep properties above 100ºC due to the presence of discontinuous Mg17A112 phases at the grain boundaries. Although rare earth-based magnesium alloys show better mechanical properties, it is not economically viable to use these alloys in auto industries. Recently, many new Mg-Al based alloy systems have been developed for high temperature applications, which do not contain the Mg17Al12 phase. It has been proved that the addition of a high percentage of zinc (which depends upon the percentage of Al) to binary Mg-Al alloys also ensures the complete removal of the Mg17Al12 phase and hence exhibits superior high temperature properties.ZA84 alloy is one such system, which has 8%Zn in it (Mg-8Zn-4Al-0.2Mn, all are in wt %) and shows superior creep resistance compared to AZ and AM series alloys. These alloys are mostly used in die casting industries. However, there are certain large and heavy components, made up of this alloy by sand castings that show lower mechanical properties because of their coarse microstructure. Moreover, further improvement in their high temperature behaviour through microstructural modification is also an essential task to make this alloy suitable for the replacement of high strength aluminium alloys used in automobile industry. Grain refinement is an effective way to improve the tensile behaviour of engineering alloys. In fact, grain refinement of Mg-Al based alloys is well documented in literature. However, there is no grain refiner commercially available in the market for Mg-Al alloys. It is also reported in the literature that the microstructure of AZ91 alloy is modified through the minor elemental additions such as Sb, Si, Sr, Ca, etc., which enhance its high temperature properties because of the formation of new stable intermetallics. The same strategy can be used with the ZA84 alloy system to improve its high temperature properties further without sacrificing the other properties. The primary objective of the present research work, “Studies on grain refinement and alloying additions on the microstructure and mechanical properties of Mg-8Zn-4Al alloy” is twofold: 1. To investigate the role of individual and combined additions of Sb and Ca on the microstructure and mechanical properties of ZA84 alloy. 2. To synthesis a novel Mg-1wt%Al4C3 master alloy for grain refinement of ZA84 alloy and investigate its effects on mechanical properties.

Manejo interdisciplinario integrado de vida real contra uno multidisciplinario desintegrado para disminuir exceso de peso : Endocare-Bogotá, Colombia

Introducción: la problemática del Sistema Colombiano de Salud, no favorece que los pacientes reciban un manejo interdisciplinario integrado para disminuir su exceso de peso. Metodología: estudio retrospectivo, comparativo y de serie de casos en el período comprendido entre junio de 2006 y febrero de 2009 en el centro de investigación endocrinológica Endocare. Se seleccionaron 62 pacientes (46 mujeres y 16 varones entre 22 y 88 años): 31 pacientes en el grupo interdisciplinario integrado y 31 pacientes en el grupo multidisciplinario desintegrado. Se les realizó un manejo por endocrinología, nutrición y deportología; si recibían y cumplían con las tres valoraciones en Endocare se definían como tratamiento interdisciplinario integrado de lo contrario se definían como tratamiento multidisciplinario desintegrado. Se evaluaron los cambios de peso y de perímetro de cintura logrados por cada paciente durante doce meses. Resultados: se observó una diferencia estadísticamente significativa mediante un análisis Anova de un factor para la reducción de peso, con una media de reducción de -6% (-8 a -3.9%) del manejo integrado comparado con -3.6% (-4.5 a -2.8%) del manejo desintegrado (IC95%,F= 4.58,p= 0.036). También se observó una disminución del perímetro de cintura, con una media de reducción de -8.1% (-10.6 a -5.5%) del manejo integrado comparado con -4.6% (-5.9 a -3.3%) del manejo desintegrado (IC95%,F=4.58,p=0.036), en un seguimiento a doce meses. Se encontró correlación entre disminución de peso y disminución del perímetro de cintura (Pearson=0.455 p=0.044). Discusión: es posible que un manejo interdisciplinario integrado produzca a un año una mayor reducción de exceso de peso y cintura.

Cirugía bariatrica : gastrogastroplastia laparoscopica y bypass gástrico en pacientes con obesidad mórbida

La obesidad es un problema de salud global siendo la cirugía bariatrica el mejor tratamiento demostrado. El Bypass gástrico (BGYR) es el método más utilizado que combina restricción y malabsorcion; sin embargo los procedimientos restrictivos se han popularizado recientemente. La Gastro-gastroplastia produce restricción gástrica reversible por medio de un pouch gástrico con anastomosis gastrogástrica y propusimos su evaluación Métodos: Estudio retrospectivo no randomizado que evaluó archivos de pacientes con GG y BGYR laparoscópicos entre febrero de 2008 y Abril de 2011 Resultados: 289 pacientes identificados: 180 GG y 109 BGYR de los cuales 138 cumplieron criterios de inclusión, 77 (55.8%) GG y 61 (44,2%) BGYR, 18 (13%) hombres y 120 (87%) mujeres. Para GG la mediana del peso inicial fue 97,15 (± 17,3) kg, IMC inicial de 39,35 (± 3,38) kg/m2 y exceso de peso de 37,1 (±11,9). La mediana de IMC a los 1, 6 y 12 meses fue 34,8 (±3,58) kg/m2, 30,81 (±3,81) kg/m2, 29,58 (±4,25) kg/m2 respectivamente. La mediana de % PEP 1, 6 y 12 meses fue 30,9 (±14,2) %, 61,88 (±18,27) %, 68,4 (±19,64) % respectivamente. Para BGYR la mediana del peso inicial fue 108,1 (± 25,4) kg, IMC inicial 44,4 (± 8,1) y exceso de peso de 48,4 (±15,2) %. La mediana de IMC a los 1, 6 y 12 meses fue 39 (±7,5) kg/m2, 33,31 (±4,9) kg/m2, 30,9 (±4,8) kg/m2 respectivamente. La mediana de % PEP 1, 6 y 12 meses fue 25,9 (±12,9) %, 61,87 (±18,62) %, 71,41 (±21,09) % respectivamente. Seguimiento a un año Conclusiones: La gastro-gastroplastia se plantea como técnica restrictiva, reversible, con resultados óptimos en reducción de peso y alternativa quirúrgica en pacientes con obesidad. Son necesarios estudios a mayor plazo para demostrar mantenimiento de cambios en el tiempo

Cirugía bariatrica : gastrogastroplastia laparoscópica y bypass gástrico en pacientes con obesidad mórbida

La obesidad es un problema de salud global siendo la cirugía bariatrica el mejor tratamiento demostrado. El Bypass Gástrico (BGYR) es el método más utilizado que combina restricción y malabsorcion; sin embargo los procedimientos restrictivos se han popularizado recientemente. La Gastro-gastroplastia produce restricción gástrica reversible por medio de un pouch gástrico con anastomosis gastrogástrica y propusimos su evaluación Métodos: Estudio retrospectivo no randomizado que evaluó archivos de pacientes con GG y BGYR laparoscópicos entre Febrero de 2008 y Abril de 2011 Resultados: 289 pacientes identificados: 180 GG y 109 BGYR de los cuales 138 cumplieron criterios de inclusión, 77 (55.8%) GG y 61 (44,2%) BGYR, 18 (13%) hombres y 120 (87%) mujeres. Para GG la mediana del peso inicial fue 97,15 (± 17,3) kg, IMC inicial de 39,35 (± 3,38) kg/m2 y exceso de peso de 37,1 (±11,9). La mediana de IMC a los 1, 6 y 12 meses fue 34,8 (±3,58) kg/m2, 30,81 (±3,81) kg/m2, 29,58 (±4,25) kg/m2 respectivamente. La mediana de % PEP 1, 6 y 12 meses fue 30,9 (±14,2) %, 61,88 (±18,27) %, 68,4 (±19,64) % respectivamente. Para BGYR la mediana del peso inicial fue 108,1 (± 25,4) kg, IMC inicial 44,4 (± 8,1) y exceso de peso de 48,4 (±15,2) %. La mediana de IMC a los 1, 6 y 12 meses fue 39 (±7,5) kg/m2, 33,31 (±4,9) kg/m2, 30,9 (±4,8) kg/m2 respectivamente. La mediana de % PEP 1, 6 y 12 meses fue 25,9 (±12,9) %, 61,87 (±18,62) %, 71,41 (±21,09) % respectivamente. Seguimiento a un año. Conclusiones: La gastro-gastroplastia se plantea como técnica restrictiva, reversible, con resultados óptimos en reducción de peso y alternativa quirúrgica en pacientes con obesidad. Son necesarios estudios a mayor plazo para demostrar mantenimiento de cambios en el tiempo.

Childhood obesity: should primary school children be routinely screened? A systematic review and discussion of the evidence

Background: Population monitoring has been introduced in UK primary schools in an effort to track the growing obesity epidemic. It has been argued that parents should be informed of their child's results, but is there evidence that moving from monitoring to screening would be effective? We describe what is known about the effectiveness of monitoring and screening for overweight and obesity in primary school children and highlight areas where evidence is lacking and research should be prioritised. Design: Systematic review with discussion of evidence gaps and future research. Data sources: Published and unpublished studies ( any language) from electronic databases ( inception to July 2005), clinical experts, Primary Care Trusts and Strategic Health Authorities, and reference lists of retrieved studies. Review methods: We included any study that evaluated measures of overweight and obesity as part of a population-level assessment and excluded studies whose primary outcome measure was prevalence. Results: There were no trials assessing the effectiveness of monitoring or screening for overweight and obesity. Studies focussed on the diagnostic accuracy of measurements. Information on the attitudes of children, parents and health professionals to monitoring was extremely sparse. Conclusions: Our review found a lack of data on the potential impact of population monitoring or screening for obesity and more research is indicated. Identification of effective weight reduction strategies for children and clarification of the role of preventative measures are priorities. It is difficult to see how screening to identify individual children can be justified without effective interventions.

Estudo comparativo de pás para aerogeradores de grande porte fabricadas em materiais compósitos reforçadas com fibra de carbono ou fibra de vidro

The research and development of wind turbine blades are essential to keep pace with worldwide growth in the renewable energy sector. Although currently blades are typically produced using glass fiber reinforced composite materials, the tendency for larger size blades, particularly for offshore applications, has increased the interest on carbon fiber reinforced composites because of the potential for increased stiffness and weight reduction. In this study a model of blade designed for large generators (5 MW) was studied on a small scale. A numerical simulation was performed to determine the aerodynamic loading using a Computational Fluid Dynamics (CFD) software. Two blades were then designed and manufactured using epoxy matrix composites: one reinforced with glass fibers and the other with carbon fibers. For the structural calculations, maximum stress failure criterion was adopted. The blades were manufactured by Vacuum Assisted Resin Transfer Molding (VARTM), typical for this type of component. A weight comparison of the two blades was performed and the weight of the carbon fiber blade was approximately 45% of the weight of the fiberglass reinforced blade. Static bending tests were carried out on the blades for various percentages of the design load and deflections measurements were compared with the values obtained from finite element simulations. A good agreement was observed between the measured and calculated deflections. In summary, the results of this study confirm that the low density combined with high mechanical properties of carbon fibers are particularly attractive for the production of large size wind turbine blades

Biological activity of astilbin from Dimorphandra mollis against Anticarsia gemmatalis and Spodoptera frugiperda

Astilbin was isolated in high yield from Dimorphandra mollis, and its insecticidal and growth inhibiting activity by stomach ingestion were evaluated against Anticarsia gemmatalis and Spodoptera frugiperda. The insecticidal activity of astilbin, the weight reduction of the larval phase and the prolongation of the larval and pupal phases were verified for both species. Astilbin was identified on the base of its NMR, MS and physical data. (C) 2002 Society of Chemical Industry.

Estudo da desidratação osmótica da cenoura (Daucus carota) em fatias

In the area of food dehydration, drying of vegetables has a very representative position, it has the objective to preserve the surplus of crops and began with sun drying. Among the vegetable is the carrot, which had its origin in Southeast Asia and in Brazil is a vegetable cultivated enough. The principal objective of this works is to find alternative ways for the conservation of carrot slices by osmotic dehydration with additional drying in heart. Were initially defined the best conditions of pre-osmotic dehydration (temperature, immersion time, type of osmotic solution) based on the results of humidity loss, solid gain, weight reduction and efficiency ratio of predehydrated carrots slices. The osmotic solutions used were composed by NaCl (10%) and sucrose (50 ° Brix) named DO1 and sucrose (50 ° Brix) called DO2. Was made experiment of pre-osmotic dehydration of carrot slices in two temperature levels, with complementary drying in heart with air circulation at 70 º C. Sensory analysis was performed and the study of slices dehydration osmotically and the slices without osmotic treatment. The best results were obtained with the solution DO1 60°C with immersion time of 60 min. The drying of carrot slices presented period of constant rate and decreasing rate. The osmotic pre-treatment reduced the initial humidity of carrot slices, reducing the time to the product to reach the same humidity content. Fick's model, considering the shrinkage, and the Page s model, adapt satisfactorily to experimental datas, allowing the determination of effective diffusion coefficients, consistent with the references. The results of sensory analysis of dry product, showed greater acceptance of sliced carrots with osmotic treatment

Desfechos clínicos e mortalidade de sujeitos submetidos à cirurgia bariátrica no Rio Grande do Norte

Introduction: Actually the obesity is a public health problem throughout the world. Bariatric surgery has been an efficient method of weight reduction body in severe obesity, reducing its associated effects and presenting low levels of immediate and late postoperative complications. In Brazil, bariatric surgery asa recent therapeutic that has been growing recently. Being Brazil a country with continental dimensions and with a huge diversity socioeconomic and cultural, it is essential to understand the reality of patients undergoing bariatric surgery in less economically privileged regions of Brazil. Objectives: To evaluate the epidemiological, clinical outcomes and mortality of patients undergoing videolaparoscopic bariatric surgery through the public health system in the Brazilian state of Rio Grande do Norte- Brazil. Methods: Observational descriptive study of a prospective, carried out from February 2009 to February 2011, the Clinic Obesity and Bariatric Surgery at Universitary Hospital Onofre Lopes - Federal University of Rio Grande do Norte (HUOL-UFRN). Anthropometric measures, comorbidity and deaths register were made in the postoperative period. Results: Seventy patients (54 women) with low income aged 22 to 63 years completed the study. We recorded the death of three patients during the study period. The results show significant decrease anthropometric parameters, especially in relation to body weight, waist circumference and hipin both sexes. Only Waist / Hip ratio showed no difference after intervention in male patients It had a resolution of comorbidities. No significant differences in reports of daily sleepiness and the snoring male patients. Conclusion: Our findings attest laparoscopic bariatric surgery as an effective method reducing weight and comorbidities in morbidly obese patients

Efeito protetor da microbiota cecal congelada e liofilizada sobre a infecção experimental de frangos de corte por Salmonella enterica sorovar Enteritidis

Estudaram-se os efeitos do tratamento de frangos de corte com microbiota cecal anaeróbia liofilizada (MCL) e congelada (MCC) sobre a infecção do trato digestivo das aves por Salmonella enterica sorovar Enteritidis. Foi usada microbiota intestinal sem prévia identificação bacteriana. A infecção foi persistente, em ordem, no ceco, inglúvio e duodeno. A infecção também foi autolimitante nos grupos tratados e no controle. Não ocorreu diferença entre o grupo-controle positivo e os tratados com MCL ou MCC. Houve redução da colonização do ceco no período de 12 dias após o desafio nos grupos tratados com MCL e MCC, o que não ocorreu no grupo-controle positivo. Não houve variação entre os tratamentos com MCL e MCC quanto às características pesquisadas. A S. Enteritidis reduziu o ganho de peso médio nas aves inoculadas. Os tratamentos com MCL e MCC minimizaram a redução de peso nos grupos infectados.

Intermaxillary fixation as co-adjuvant treatment for morbid obesity

Background: the effective long-term treatments for morbid obesity is bariatric surgery. However, the associated surgical and anesthetic risks led the authors to evaluate intermaxillary fixation, a less aggressive procedure, as a preoperative treatment in selected patients with morid obesity.Methods: 22 patients (5 male, 17 female, ages 16-53 years, with BMI 44.9 +/- 5.4 kg/m(2)) underwent intermaxillary fixation. The procedure consisted of fitting brackets on the front face of the teeth and posterior application of elastic bands to impede mouth opening.Results: At the end of 6 weeks, weight loss was 7.4 +/- 2.6% there was general improvement in lipid profile, glycemia, and blood pressure. There was no recorded discomfort, pain, or any other difficulty during this treatment.Conclusion: Intermaxillary fixation can be used as a pre-surgical solution for weight reduction in preparation for bariatric surgery, improving co-morbid aspects such as blood pressure, glycemia, and lipid profile.