Transformations induced in bulk amorphous silica by ultrafast laser direct writingTransformations induced in bulk amorphous silica by ultrafast laser direct writing

Agências Financiadoras: Fundação para a Ciência e a Tecnologia - PTDC/FIS/102127/2008 e PTDC/FIS/102127/2008 e SFRH/BPD/78871/2011; Spanish Ministerio de Ciencia e Innovacion - FUNCOAT-CSD2008-00023-CONSOLIDER; Instituto Superior Técnico;

Práticas de ensino de teatro para atores e para não atores : estudo de caso João Mota e as oficinas de teatro : relatório de estágio

Mestrado Teatro, especialização em teatro e comunidade

Internal structure of the nanogratings generated inside bulk fused sílica by ultrafast laser direct writing

The aim of the present work was to characterize the internal structure of nanogratings generated inside bulk fused silica by ultrafast laser processing and to study the influence of diluted hydrofluoric acid etching on their structure. The nanogratings were inscribed at a depth of 100 mu m within fused silica wafers by a direct writing method, using 1030 nm radiation wavelength and the following processing parameters: E = 5 mu J, tau = 560 fs, f = 10 kHz, and v = 100 mu m/s. The results achieved show that the laser-affected regions are elongated ellipsoids with a typical major diameter of about 30 mu m and a minor diameter of about 6 mu m. The nanogratings within these regions are composed of alternating nanoplanes of damaged and undamaged material, with an average periodicity of 351 +/- 21 nm. The damaged nanoplanes contain nanopores randomly dispersed in a material containing a large density of defects. These nanopores present a roughly bimodal size distribution with average dimensions for each class of pores 65 +/- 20 x 16 +/- 8 x 69 +/- 16 nm(3) and 367 +/- 239 x 16 +/- 8 x 360 +/- 194 nm(3), respectively. The number and size of the nanopores increases drastically when an hydrofluoric acid treatment is performed, leading to the coalescence of these voids into large planar discontinuities parallel to the nanoplanes. The preferential etching of the damaged material by the hydrofluoric acid solution, which is responsible for the pores growth and coalescence, confirms its high defect density. (C) 2014 AIP Publishing LLC.

Surface morphology and phase transformations of femtosecond laser-processed saphire

The morphological and structural modifications induced in sapphire by surface treatment with femtosecond laser radiation were studied. Single-crystal sapphire wafers cut parallel to the (0 1 2) planes were treated with 560 fs, 1030 nm wavelength laser radiation using wide ranges of pulse energy and repetition rate. Self-ordered periodic structures with an average spatial periodicity of similar to 300 nm were observed for fluences slightly higher than the ablation threshold. For higher fluences the interaction was more disruptive and extensive fracture, exfoliation, and ejection of ablation debris occurred. Four types of particles were found in the ablation debris: (a) spherical nanoparticles about 50 nm in diameter; (b) composite particles between 150 and 400 nm in size; (c) rounded resolidified particles about 100-500 nm in size; and (d) angular particles presenting a lamellar structure and deformation twins. The study of those particles by selected area electron diffraction showed that the spherical nanoparticles and the composite particles are amorphous, while the resolidified droplets and the angular particles, present a crystalline a-alumina structure, the same of the original material. Taking into consideration the existing ablation theories, it is proposed that the spherical nanoparticles are directly emitted from the surface in the ablation plume, while resolidified droplets are emitted as a result of the ablation process, in the liquid phase, in the low intensity regime, and by exfoliation, in the high intensity regime. Nanoparticle clusters are formed by nanoparticle coalescence in the cooling ablation plume. (C) 2013 Elsevier B.V. All rights reserved.

Evidences for direct magnetic patterning via diffusive transformations using femtosecond laser interferometry

The application of femtosecond laser interferometry to direct patterning of thin-film magnetic alloys is demonstrated. The formation of stripe gratings with submicron periodicities is achieved in Fe1-xVx (x=18-34wt. %) layers, with a difference in magnetic moments up to Delta mu/mu similar to 20 between adjacent stripes but without any significant development of the topographical relief (<1% of the film thickness). The produced gratings exhibit a robust effect of their anisotropy shape on magnetization curves in the film plane. The obtained data witness ultrafast diffusive transformations associated with the process of spinodal decomposition and demonstrate an opportunity for producing magnetic nanostructures with engineered properties upon this basis.

Laser surfasse patterning using a Michelson interferometer and a femtosecond laser radiation

We report on a simple method to obtain surface gratings using a Michelson interferometer and femtosecond laser radiation. In the optical setup used, two parallel laser beams are generated using a beam splitter and then focused using the same focusing lens. An interference pattern is created in the focal plane of the focusing lens, which can be used to pattern the surface of materials. The main advantage of this method is that the optical paths difference of the interfering beams is independent of the distance between the beams. As a result, the fringes period can be varied without a need for major realignment of the optical system and the time coincidence between the interfering beams can be easily monitored. The potential of the method was demonstrated by patterning surface gratings with different periods on titanium surfaces in air.

Sub-micron structuring of silicon using femtosecond laser interferometry

We report the fabrication of planar sub-micron gratings in silicon with a period of 720 nm using a modified Michelson interferometer and femtosecond laser radiation. The gratings consist of alternated stripes of laser ablated and unmodified material. Ablated stripes are bordered by parallel ridges which protrude above the unmodified material. In the regions where ridges are formed, the laser radiation intensity is not sufficient to cause ablation. Nevertheless, melting and a significant temperature increase are expected, and ridges may be formed due to expansion of silicon during resolidification or silicon oxidation. These conclusions are consistent with the evolution of the stripes morphology as a function of the distance from the center of the grating.

O zoo como estratégia de desenvolvimento de uma consciência ética e observadora sobre os animais em crianças do 1.º ciclo do ensino básico

Dissertação apresentada à Escola Superior de Educação de Lisboa para obtenção do grau de mestre em Ensino do 1º e do 2º Ciclos

Padrão lesional da medula óssea na imunodeficiência adquirida (AIDS)

O estudo da medula óssea em 20 casos de necrópsia de pacientes portadores da Síndrome da Imunodeficiência Adquirida sugere que as alterações medulares são freqüentes e de valor diagnóstico no reconhecimento da Síndrome. É admitida a existência de um padrão lesional diagnóstico onde predominam os seguintes elementos: hipercelularidade, ausência ou redução da granulopoiese, plasmocitose, histiocitose e displasia megacariocítica.

Large-area homogeneous periodic surface structures generated on the surface sputtered boron carbide thin films by femtosecond laser processing

Amorphous and crystalline sputtered boron carbide thin films have a very high hardness even surpassing that of bulk crystalline boron carbide (≈41 GPa). However, magnetron sputtered B-C films have high friction coefficients (C.o.F) which limit their industrial application. Nanopatterning of materials surfaces has been proposed as a solution to decrease the C.o.F. The contact area of the nanopatterned surfaces is decreased due to the nanometre size of the asperities which results in a significant reduction of adhesion and friction. In the present work, the surface of amorphous and polycrystalline B-C thin films deposited by magnetron sputtering was nanopatterned using infrared femtosecond laser radiation. Successive parallel laser tracks 10 μm apart were overlapped in order to obtain a processed area of about 3 mm2. Sinusoidal-like undulations with the same spatial period as the laser tracks were formed on the surface of the amorphous boron carbide films after laser processing. The undulations amplitude increases with increasing laser fluence. The formation of undulations with a 10 μm period was also observed on the surface of the crystalline boron carbide film processed with a pulse energy of 72 μJ. The amplitude of the undulations is about 10 times higher than in the amorphous films processed at the same pulse energy due to the higher roughness of the films and consequent increase in laser radiation absorption. LIPSS formation on the surface of the films was achieved for the three B-C films under study. However, LIPSS are formed under different circumstances. Processing of the amorphous films at low fluence (72 μJ) results in LIPSS formation only on localized spots on the film surface. LIPSS formation was also observed on the top of the undulations formed after laser processing with 78 μJ of the amorphous film deposited at 800 °C. Finally, large-area homogeneous LIPSS coverage of the boron carbide crystalline films surface was achieved within a large range of laser fluences although holes are also formed at higher laser fluences.

Laser-induced diffusion decomposition in Fe-V thin-film alloys

We investigate the origin of ferromagnetism induced in thin-film (similar to 20 nm) Fe-V alloys by their irradiation with subpicosecond laser pulses. We find with Rutherford backscattering that the magnetic modifications follow a thermally stimulated process of diffusion decomposition, with formation of a-few-nm-thick Fe enriched layer inside the film. Surprisingly, similar transformations in the samples were also found after their long-time (similar to 10(3) s) thermal annealing. However, the laser action provides much higher diffusion coefficients (similar to 4 orders of magnitude) than those obtained under standard heat treatments. We get a hint that this ultrafast diffusion decomposition occurs in the metallic glassy state achievable in laser-quenched samples. This vitrification is thought to be a prerequisite for the laser-induced onset of ferromagnetism that we observe. 2014 Elsevier B.V. All rights reserved.

Feminino & masculino em "Morangos com açucar" : análise da construção de género em programas de televisão vistos por crianças

DISSERTAÇÃO apresentada para cumprimento dos requisitos necessários à obtenção do grau de Mestre em ESTUDOS SOBRE AS MULHERES

Projeto de Reabilitação da EM 607 no Concelho de Valongo

Pretende-se com este trabalho fazer um estudo detalhado de um troço da Estrada Municipal 607, situado no concelho de Valongo, caracterizando o seu estado de degradação e definindo qual ou quais as soluções mais convenientes de reabilitação a adotar. O pavimento alvo deste trabalho é abrangido por três ruas pertencentes à EM 607, Rua de Vilar, Rua de Cabeda e Rua D. Pedro IV e apresenta uma extensão total de 4,8 km. Este trabalho pode ser dividido em duas partes distintas: uma primeira parte, mais do âmbito teórico, onde é feita uma abordagem histórica desde o desenvolvimento dos pavimentos rodoviários até aos métodos e pavimentos existentes na atualidade e uma segunda parte, que diz respeito ao desenvolvimento prático do trabalho, onde é feito um estudo do pavimento e são apresentadas soluções de reabilitação e respetivos dimensionamentos. Iniciou-se o estudo do pavimento com uma análise geral das patologias existentes, definindo o estado de degradação em que este se encontra. Concluiu-se que se estava na presença de um pavimento muito degradado, havendo troços com um nível de degradação muito elevado, o que proporciona desconforto na circulação dos condutores. Foi efetuado um estudo de tráfego de pesados, onde se percebeu que se tratava de um pavimento com intenso tráfego de pesados e que talvez este pavimento não esteja apto para o suportar. A retirada de carotes veio confirmar este pressuposto, pois as espessuras das camadas betuminosas mostraram ser insuficientes para o atual volume de tráfego. As soluções de reabilitação foram ao encontro de várias soluções para diferentes situações, dando aos responsáveis da Câmara Municipal de Valongo a possibilidade de optarem por aquela que melhor se ajuste às suas necessidades, bem como às suas condições financeiras. Assim, foram propostas três soluções para três capacidades de resistência e períodos de vida úteis distintos. A primeira solução engloba a remoção do pavimento existente e colocação de uma estrutura completamente nova, com três camadas betuminosas e dimensionada para o volume de tráfego atual, apresentando um período de vida útil de 20 anos, mas que é mais dispendiosa. A segunda solução apresenta apenas duas camadas betuminosas, onde seriam removidas apenas as camadas betuminosas, aproveitando a camada de sub-base. Esta solução tem um período de vida útil estimado de cerca de 8 anos. A terceira solução, com um período de vida útil de 5 anos, baseia-se na remoção parcial de uma largura da faixa de rodagem, aproveitando a restante. Na largura removida seria colocada uma estrutura de pavimento nova e dimensionada na segunda solução. Por último, foi dimensionado o sistema de drenagem transversal e longitudinal, sendo caracterizadas as linhas de águas e as respetivas bacias hidrográficas. As valetas e passagens hidráulicas existentes não estão dimensionadas para o atual escoamento de águas pluviais a que o pavimento está sujeito. As valetas são muito reduzidas, apresentando-se em alguns casos degradadas ou a necessitarem de limpeza urgente.

Erythema induratum of Bazin and renal tuberculosis: report of an association

Erythema induratum of Bazin is a disease that usually affects women, in whom erythematous subcutaneous nodules and plaques appear on the posterior part of the lower extremities, some of which ulcerate. In many countries, tuberculosis is still the main etiologic factor. We report a case of a 40-year-old woman who presented a course of protracted and recurrent episodes over five years of cutaneous lesions on her legs. These tend to involute, but new crops appear at irregular intervals. It was painful, erythematous-violaceous nodules, some of which drained a reddish secretion. The histopathologic features of the lesions demonstrated inflammatory infiltration, with predominance of neutrophils in dermis and hypodermis, necrotizing vasculitis in the arterioles and septal fibrosis. There was no granuloma. The Ziehl-Neelsen stain did not revealed acid-fast bacilli, and the culture of biopsy specimen was negative. The tuberculin skin test was strongly positive (17 mm). The chest X-ray was normal. Few months later she presented adynamia and urinary complaints, such as polacyuria and dysuria. It has been done an urynalysis, which demonstrated acid pH urine, sterile pyuria and microscopic hematuria. It was then raised the diagnostic hypothesis of renal tuberculosis. The urine culture for M. tuberculosis was positive in two out of ten samples. The treatment was instituted with rifampin, isoniazid and pyrazinamide, with complete regression. This case illustrates a clear association between erythema induratum and renal tuberculosis, demonstrated by the remission of the cutaneous lesions after the treatment of the renal tuberculosis.

Das matanças do porco à feira do fumeiro de Vinhais. Patrimonialização e transformações sociais de um produto alimentar artesanal

Dissertação apresentada para cumprimento dos requisitos necessários à obtenção do grau de Mestre em Antropologia: Cultura Material e Consumos