Influência das tensões tectônicas na permeabilidade da formação Açu - Bacia Potiguar

The behavior of the fluid flux in oil fields is influenced by different factors and it has a big impact on the recovery of hydrocarbons. There is a need of evaluating and adapting the actual technology to the worldwide reservoirs reality, not only on the exploration (reservoir discovers) but also on the development of those that were already discovered, however not yet produced. The in situ combustion (ISC) is a suitable technique for these recovery of hydrocarbons, although it remains complex to be implemented. The main objective of this research was to study the application of the ISC as an advanced oil recovery technique through a parametric analysis of the process using vertical wells within a semi synthetic reservoir that had the characteristics from the brazilian northwest, in order to determine which of those parameters could influence the process, verifying the technical and economical viability of the method on the oil industry. For that analysis, a commercial reservoir simulation program for thermal processes was used, called steam thermal and advanced processes reservoir simulator (STARS) from the computer modeling group (CMG). This study aims, through the numerical analysis, find results that help improve mainly the interpretation and comprehension of the main problems related to the ISC method, which are not yet dominated. From the results obtained, it was proved that the mediation promoted by the thermal process ISC over the oil recovery is very important, with rates and cumulated production positively influenced by the method application. It was seen that the application of the method improves the oil mobility as a function of the heating when the combustion front forms inside the reservoir. Among all the analyzed parameters, the activation energy presented the bigger influence, it means, the lower the activation energy the bigger the fraction of recovered oil, as a function of the chemical reactions speed rise. It was also verified that the higher the enthalpy of the reaction, the bigger the fraction of recovered oil, due to a bigger amount of released energy inside the system, helping the ISC. The reservoir parameters: porosity and permeability showed to have lower influence on the ISC. Among the operational parameters that were analyzed, the injection rate was the one that showed a stronger influence on the ISC method, because, the higher the value of the injection rate, the higher was the result obtained, mainly due to maintaining the combustion front. In connection with the oxygen concentration, an increase of the percentage of this parameter translates into a higher fraction of recovered oil, because the quantity of fuel, helping the advance and the maintenance of the combustion front for a longer period of time. About the economic analysis, the ISC method showed to be economically feasible when evaluated through the net present value (NPV), considering the injection rates: the higher the injection rate, the higher the financial incomes of the final project

Organizações comunitárias e movimentos sociais : conflitos e tensões nos espaços de participação do município de Natal

This study reflects on the conflicts that exist between the different forms of participation and the political representation manifested by community organizations and social movements in the city of Natal/RN. The objective is to better understand the process of political participation of the popular classes and how the different actors have represented collective demands in the struggle for rights. To this end, we mapped the organizations, social movements and participation spaces, through a type of participant research, in which we had the opportunity to experience and study different forms of collective action and events instigated by the community organizations and the Movement for the Struggle in the Neighborhoods, Villages and Slums (Movimento de Luta nos Bairros, Vilas e Favelas) MLB. From the theoretical contributions of authors such as Maria da Glória Gohn, Marco Aurélio Nogueira, Virginia Fontes, Vera da Silva Telles, Roberto Da Matta and Carlos Montaño, as well as the empirical data collected, the study revealed that on representing their segments and occupying different spaces of participation, some actors have formed partnerships with the State, putting collective demands on a second plane. Contrarily, other actors have articulated their struggle around collective demands and manifested through direct action, mobilizing and asserting themselves in defense of a project for society

Número mínimo de tensões para determinação da curva característica de retenção de água de um latossolo vermelho eutrófico sob sistema de semeadura direta

Para o conhecimento do comportamento físico-hídrico do solo, é fundamental a determinação da curva de retenção de água (CRA). A aquisição de dados para obtenção da CRA envolve processos demorados e custos elevados. A hipótese deste estudo foi a de que é possível determinar a CRA com menor número de tensões, reduzindo seu tempo de obtenção, sem, contudo, comprometer a acurácia dos resultados. Assim, o objetivo deste trabalho foi determinar quais tensões podem ser utilizadas para determinação da CRA de Latossolo Vermelho eutrófico de maneira acurada e em menor tempo. Foram determinados os conteúdos de água retidos em amostras de um Latossolo Vermelho eutrófico sob sistema de semeadura direta (SSD). As tensões utilizadas na determinação dos conteúdos de água foram: 0, 10, 20, 40, 60, 80, 100, 200, 300, 500, 700, 1.000, 3.000, 5.000 e 15.000 hPa. Os dados foram combinados e determinaram-se 450 CRAs ajustadas pelo modelo de van Genuchten. Os parâmetros α, m, n e Ug res, gerados pelo modelo, foram submetidos à análise de variância (teste F) e as médias comparadas pelo teste de Scott-Knott (p = 0,05). A hipótese deste estudo foi confirmada, ou seja, é possível determinar a CRA com menor número de tensões, reduzindo seu tempo de obtenção em até cinco vezes, sem, contudo, comprometer a acurácia dos resultados. A tensão de 15.000 hPa deve estar contida na combinação de tensões a serem utilizadas para determinação da curva característica de retenção de água, quando se emprega o modelo matemático de van Genuchten para ajuste dos dados. As curvas características de retenção de água do solo, definidas com as combinações de tensões (0, 60, 700 e 15.000 hPa), (0, 80, 700 e 15.000 hPa), (0, 100, 1.000 e 15.000 hPa), (0, 20, 60, 100, 700 e 15.000 hPa), (0, 80, 300, 700 e 15.000 hPa) e (0, 100, 300, 1.000 e 15.000 hPa), sendo os dados ajustados ao modelo de van Genuchten, proporcionaram estimativas dos conteúdos de água, retidos no Latossolo Vermelho eutrófico sob sistema de semeadura direta, com a mesma acurácia, quando comparada à curva de referência partindo-se de um conjunto de 15 valores de tensões.

Análise de crescimento do crisântemo de vaso, cultivar Puritan, irrigado em diferentes tensões de água em ambiente protegido

A irrigação é prática fundamental para o cultivo de crisântemo, porém seu manejo adequado tem sido negligenciado pelos produtores, resultando em prejuízos no crescimento vegetal e conseqüentes decréscimos na produtividade e na qualidade do produto final. Para melhorar a representatividade dos dados obtidos, o experimento foi desenvolvido na propriedade de um produtor tradicional, no Distrito de Holambra II, município de Paranapanema-SP (23º4'S e 49º00'W). O objetivo principal do trabalho foi identificar a tensão de água no substrato (potencial matricial) que resultasse em melhor crescimento e desenvolvimento do crisântemo em vaso, cultivar Puritan. Os tratamentos foram definidos por seis níveis de tensão de água no substrato: -2, -3, -4,- 6,-10 e -30 kPa. Conclui-se, que a melhor qualidade do crisântemo em vaso foi obtida nos potenciais de água no substrato de -2, -6 e -10 kPa e que a tensão de -30 kPa, embora tenha levado à redução na qualidade comercial do crisântemo, resultou em maior durabilidade pós- colheita.

Otimização de forma aplicando B-splines sob critério integral de tensões

This work proposes a computational methodology to solve problems of optimization in structural design. The application develops, implements and integrates methods for structural analysis, geometric modeling, design sensitivity analysis and optimization. So, the optimum design problem is particularized for plane stress case, with the objective to minimize the structural mass subject to a stress criterion. Notice that, these constraints must be evaluated at a series of discrete points, whose distribution should be dense enough in order to minimize the chance of any significant constraint violation between specified points. Therefore, the local stress constraints are transformed into a global stress measure reducing the computational cost in deriving the optimal shape design. The problem is approximated by Finite Element Method using Lagrangian triangular elements with six nodes, and use a automatic mesh generation with a mesh quality criterion of geometric element. The geometric modeling, i.e., the contour is defined by parametric curves of type B-splines, these curves hold suitable characteristics to implement the Shape Optimization Method, that uses the key points like design variables to determine the solution of minimum problem. A reliable tool for design sensitivity analysis is a prerequisite for performing interactive structural design, synthesis and optimization. General expressions for design sensitivity analysis are derived with respect to key points of B-splines. The method of design sensitivity analysis used is the adjoin approach and the analytical method. The formulation of the optimization problem applies the Augmented Lagrangian Method, which convert an optimization problem constrained problem in an unconstrained. The solution of the Augmented Lagrangian function is achieved by determining the analysis of sensitivity. Therefore, the optimization problem reduces to the solution of a sequence of problems with lateral limits constraints, which is solved by the Memoryless Quasi-Newton Method It is demonstrated by several examples that this new approach of analytical design sensitivity analysis of integrated shape design optimization with a global stress criterion purpose is computationally efficient

Parcerias com a cana-de-açúcar: tensões e contradições no desenvolvimento das experiências de assentamentos rurais em São Paulo

A controversa presença da cana nos assentamentos rurais nos últimos anos exige uma cuidadosa reflexão sobre sua interferência no modo de vida dos assentados e na relação dos assentamentos com a dinâmica do desenvolvimento regional. A presença da cana-de-açúcar nos assentamentos tem causado conflitos internos e debates não consensuais sobre o passado/presente/futuro dessas experiências. A análise da parceria com as agroindústrias é atravessada, do nosso ponto de vista, pela noção de trama de tensões, exigindo que sejam submetidas ao crivo analítico as desigualdades constitutivas desta polêmica integração dos assentados às usinas de açúcar e álcool, assim como as consequências socioeconômicas e ambientais da problemática transformação dos assentamentos rurais em celeiros da cana. No âmbito desse artigo, serão considerados como objetos da investigação os assentamentos das regiões de Araraquara e do Pontal do Paranapanema e analisadas perspectivas de outro modelo de desenvolvimento.

Antropologia das mediações: um estudo sobre trocas, tensões e hierarquias em Coqueiros, Vale do Ceará Mirim

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Geomorfologia e neotectônica no Vale do Apodi-Mossoró RN

Numerous studies have indicated that the Potiguar Basin is affected by Cenozoic tectonics. The reactivation of Cretaceous fault systems affect the post-rift units, witch include Neogene and overlying Quaternary sediments. In this context, the objectives of this thesis are the followings: (1) to characterize the effects of post-rift tectonics in the morphology of Apodi Mossoró-river valley located in the central portion of the Potiguar, (2) to characterize the drainage of the Apodi Mossoró river valley and investigate the behavior of their channels across active faults, and (3) to propose a geologic-geomorphological evolutionary model for the study area. This study used a geological and geomorphological mapping of the central part of the basin, with emphasis on the Quaternary record, luminescence dating of sediments, and geoelectric profiles of the area. The results reveal by maps of structural lineaments and drainage channels of the rivers form valleys that are affected by faults and folds. In Apodi-Mossoró valley, anomalies of channel morphology are associated with the deformation of the post-rift basin. These anomalies show the reactivation of major fault systems in the Potiguar Basin in Cenozoic. On a regional scale, can be seen through the vertical electric profiles that the Cenozoic tectonics is responsible for the elevation of a macro dome NE-SE-trending 70-km long and 50km wide and up to 270 above sea level. In this sector, the vertical electric profiles data show that the contact between the Cretaceous and Neogene rise more than 100m. This Is an important feature of inversion data obtained in this work showed that the deposits that cover the macro dome (Serra do Mel) have ages of 119 ka to 43 ka. In the river valley and surrounding areas Apodi-Mossoró ages vary between 319 ka and 2.7 ka. From these data it was possible to establish the correct geochronological posiconamento paleodepósitos of distinguishing them from the fluvial deposits of the Neogene (Barreiras Formation)

Estudo geológico e geofísico da falha de carnaubais, Bacia Potiguar-RN, e implicações neotectônicas

The segment of Carnaubais Fault located in the southeasthern portion of Guamaré Graben (Potiguar Basin) was studied. Several structures were detected and some of them strongly suggest that the last movements in Carnaubais Fault are of Neotectonic age. The study comprises an integrated interpretation of geologic, geomorphologic and geophysical data (gravimetry, magnetometry, resistivity, and self potential methods). According to the size of the studied areas, two approaches were used in this research. The first approach is of a regional nature and was conducted in an area, hereafter named Regional Area, having approximately 6,000 km2 and localized in the northern portion of Rio Grande do Norte state, around Macau city. The second approach comprises detailled studies of two small areas inside the Regional Area: the Camurupim and São Bento areas. Gravimetric and topographic data were used in the Regional Area. A separation into regional and residual components were conducted both on gravimetric and topographic data. The interpretation of the residual component of the gravimetric data allows a precise mapping of the borders of the Guamaré Graben. The regional component features of the topographic data are controlled by the pair of conjugate faults composed by the Carnaubais Fault (NE direction) and the Afonso Bezerra Fault (NW direction). On the other hand, the residual component of the topographic data shows that river valleis of NW direction are sharply interrupted where they intersect Carnaubais Fault. This fact is interpreted as an evidency that the last significant moviments occured in the Carnaubais Fault. Geologic, geomorphologic and geophysical data (magnetometry, resistivity, and self potential methods) were used in the Camurupim Area. The geologic mapping allows to identify five lithophacies unities. The first two unities (from base to top) were interpreted as composing a marine (or transitional) depositional sequency while the other were interpreted is composing a continental depositional sequence. The two sequences are clearly separated of an erosional discordance. The unities grouped in the marine sequence are composed by calcarenites (Unity A) and mudstones (Unity B). Unity A was deposited in a shalow plataform while Unity B, in a tidal flat. The unities grouped in the continental sequence are composed of conglomerate (Unity C) and sandstones (Unities D and E). Unities C and D are fluvial deposits while unity E is an eolian deposit. Unities A and B can be stratigraphycally correlated with Guamaré Formation. Unities C and D present three possible correlations. They may be correlated with Tibau Formation; or with Barreiras Formation; or with a clastic sediment deposit, commonly found in some rivers of Rio Grande do Norte state, and statigraphycally positioned above Barreiras Formation. Based on the decrease of the grain sizes from base to top both on unities C and D, it is proposed that these unities are correlated with the clastic sediment above mentioned. In this case, these unities would have, at least, Pleistocenic age. Finally, it is proposed that Unity E represent an eolian deposit that sufferred recent changes (at least in the Quaternary). The integrated interpretation of hydrographic, morphologic and geophysical data from Camurupim Area shows that Carnaubais Fault is locally composed by a system of several paralel subvertical faults. The fault presenting the larger vertical slip controls the valley of Camurupim river and separates the area in two blocks; in the nothern block the top of the Jandaira limestone is deeper than in the southern block. In addition, at least one of the faults in the northern block is cutting the whole sedimentary section. Because unities C , D, and/or E may be of Quaternary age, tectonic moviments possibly occured in Carnaubais Fault during this period. Detailled geologic mapping were conducted in beachrocks found in São Bento Area. This area is located at the intersection of the coast line with the Carnaubais Fault. The detected structures in the beachrocks are very similar to those caused by fragile deformations. The structures mapped in the beachrocks are consistent with a stress field with maximun compressional stress in E-W direction and extensional stress in the N-S direction. Since the Carnaubais Fault has a NE direction, it is optimally positioned to suffer tectonic movements under the action of such stress field. In addition, the shape of the coastal line appear to be controlled by the Carnaubais Fault. Furthemore, the observed structures in Camurupim Área are consistent with this stress field. These facts are interpreted as evidences that Carnaubais Fault and beachrocks suffered coupled tectonic movements. These moviments are of Neotectonic age because the beachrocks present ages less than 16,000 years

Orientação e magnitude de tensões na bacia potiguar: implicações para evolução de bacias em margens passivas

This study presents new stress orientations and magnitudes from the Potiguar basin in the continental margin of Brazil. We analyzed breakout and drilled induced fractures derived from resistivity image logs run in ten oil wells. We also used direct Shmin measurements determined from hydraulic fractures and rock strength laboratory analysis. In addition, we compared these results with 19 earthquake focal mechanisms located in the crystalline basement. We observed that stress directions and magnitudes change across the basin and its basement. In the basin, the SHmax gradient of 20.0 MPa/km and the SHmax/Shmin ratio of 1.154 indicate a normal stress regime from 0.5 to 2.0 km, whereas the SHmax gradient of 24.5MPa/km and the SHmax/Shmin ratio of 1.396 indicate a strike slip stress regime from 2.5 to 4.0 km. The deeper strike-slip stress regime in the basin is similar to the regime in the basement at 1-12 km deep. This stress regime transition is consistent with an incipient tectonic inversion process in the basin. We also noted that the SHmax direction rotates from NW SE in the western part of the Potiguar basin to E W in its central and eastern part, following roughly the shoreline geometry. It indicates that local factors, as density contrast between continental and oceanic crust and sediment loading at the continental shelf influence the stress field. The concentration of fluid pressure in faults of the lowpermeability crystalline basement and its implications to establish a critically stressed fault regime in the basement is also discussed

Público e privado na formação social brasileira: velhas, novas e novíssimas tensões

O artigo procura traçar um quadro panorâmico de alguns momentos da história brasileira para tentar encontrar as determinações que fizeram com que a intersubjetividade e a 'eticidade' mergulhassem num padrão deletério e nele ficassem amarradas. Busca assim explicar a dificuldade quase crônica que a elite política brasileira tem de governar de modo republicano, ou seja, fazendo com que o interesse público prevaleça democraticamente sobre os interesses privados, sejam esses interesses os do dinheiro, do voto ou das corporações. Sem virtude pública constituída e sedimentada na sociedade e na cultura política, o Brasil cresceu com dificuldades para se aprumar em termos democráticos e republicanos. Mas é uma comunidade que se reconhece como tal, que compartilha uma cultura rica e expressiva, que bem ou mal tem um sistema político e de governo.

Aplicação do Índice Relaçáo Declividade-Extensão - RDE Na Bacia do Rio do Peixe (SP) para Detecção de Deformações Neotectô nicas

This paper presents the identification of tectonic deformation through the application of the stream-gradient index (slope x length) method in the Rio do Peixe hydrographic basin, located in western State of Sã o Paulo. The main principle used is that river valleys are the best tools for this type of analysis because of their fast adjustment to even the most gentle crustal deformations. This type of analysis for structural studies is extremely useful in the western region of the State of São Paulo, where deep chemical weathering results in a thick regolith and scarce outcrops. The stream length index is the ratio of the altimetric amplitude of each drainage and the natural logarithm of its length. The value obtained is plotted on maps at the median point of each drainage, allowing the drawings of lines with the same values (isodefs). Three anomalies (A, B and C) were identified along the Rio do Peixe valley representing uplift sectors indicated by the formation and distribution of Upper Quaternary deposits in terraces and modern fluvial plains and alluvial fans. In correlation with known tectonic data for this region it is possible to attribute the A and B anomalies to the Ribeirão Preto and Presidente Prudente crustal sutures, respectively. The smaller C anomaly needs further field investigation, but it could be associated with the Três Lagoas crustal suture. It must be emphasised that these sutures are inherited from the Precambrian Basement which had a strong influence on the Phanerozoic evolution in the whole sedimentary and volcanic stratigraphic pile of the Paraná Basin and on the dominant structural lineaments directions developed therein .The A, Band C anomalies are suggestive of renewed uplift as a result of neotectonic action in modern times.

Detecção de prováveis deformações neotectônicas no Vale do Rio do Peixe, Região Ocidental Paulista, mediante aplicaçao de Índices RDE (Relac̈ão Declividade-Extensão) em segmentos de drenagem

Running water is one of the most important of all the physical processes which fashion the landscape, allowing gravity to operate along the valley floors. Besides this, the streams show a fast adjustment to the crustal deformations, even to the most gentle ones. This geologic behavior turns them a potential tool for neotectonic studies, specially the analysis of morphotnetric parameters associated with hydraulic gradient and discharge, this second factor being directly proportional to the extension of the streams. Both elements, gradient and stream length, can be combined in the SL index. The purpose of this paper is to show the RDE index application in the neotectonics analysis of the Rio do Peixe hydrographic basin and to compare the obtained values with the geologic basement incised by the streams. This basement encompasses Cretaceous sedimentary rocks of post-Serra Oeral Formation magmatism (Caiuá and Bauru groups) and Quaternary deposits that include chiefly recent alluvial plains and some Pleistocene terrace deposits. In the final part of this paper, an attempt is made in order to correlate the RDE results and the neotectonic framework admitted to this portion of the São Paulo State territory, as well as with field geologic, seismologic and paleoseismologic known elements. The results indicate the presence of two groups of anomalies: The first set corresponds to the Marília-Exaporã Plateau border, and the second one, located in the central portion of the hydrographic basin, is correlated to the Presidente Prudente seimogenic zone.