767 resultados para Sustainability features
Resumo:
Use of chemical inputs such as pesticides has increased agricultural production and productivity. However, negative externalities from such use have increased too. These externalities include damage to agricultural land, fisheries, fauna and flora. Another major externality is the unintentional destruction of beneficial predators of pests thereby increasing the virulence of many species of agricultural pests. Furthermore, increased mortality and morbidity of humans due to exposure to pesticides are recorded especially in developing countries. The costs from these externalities are large and affect farmers' returns. However, despite these high costs, farmers continue to use pesticides and in most countries in increasing quantities. In this paper, we examine this paradox and show why farmers continue to use pesticides despite the increasing costs. We also emphasize 'lock-in' aspects of pesticide use. (C) 2001 Elsevier Science B.V. All rights reserved.
Resumo:
Germline mutations of the PTEN tumor-suppressor gene, on 10q23, cause Cowden syndrome, an inherited hamartoma syndrome with a high risk of breast, thyroid and endometrial carcinomas and, some suggest, melanoma. To date, most studies which strongly implicate PTEN in the etiology of sporadic melanomas have depended on cell lines, short-term tumor cultures and noncultured metastatic melanomas. The only study which reports PTEN protein expression in melanoma focuses on cytoplasmic expression, mainly in metastatic samples. To determine how PTEN contributes to the etiology or the progression of primary cutaneous melanoma, we examined cytoplasmic and nuclear PTEN expression against clinical and pathologic features in a population-based sample of 150 individuals with incident primary cutaneous melanoma. Among 92 evaluable samples, 30 had no or decreased cytoplasmic PTEN protein expression and the remaining 62 had normal PTEN expression. In contrast, 84 tumors had no or decreased nuclear expression and 8 had normal nuclear PTEN expression. None of the clinical features studied, such as Clark's level and Breslow thickness or sun exposure, were associated with cytoplasmic PTEN expressional levels. An association with loss of nuclear PTEN expression was indicated for anatomical site (p = 0.06) and mitotic index (p = 0.02). There was also an association for melanomas to either not express nuclear PTEN or to express p53 alone, rather than both simultaneously (p = 0.02). In contrast with metastatic melanoma, where we have shown previously that almost two-thirds of tumors have some PTEN inactivation, only one-third of primary melanomas had PTEN silencing. This suggests that PTEN inactivation is a late event likely related to melanoma progression rather than initiation. Taken together with our previous observations in thyroid and islet cell tumors, our data suggest that nuclear-cytoplasmic partitioning of PTEN might also play a role in melanoma progression. (C) 2002 Wiley-Liss, Inc.
Resumo:
While mutations of CDKN2A are associated with melanoma predisposition, the precise role of its gene product p16 in the development of sporadic melanoma is less clearly understood. We sought to determine the prevalence of p16 expression using immunohistochemical analysis in a population-based sample of melanoma tumours, and also to identify histological, phenotypic and environmental factors associated with the presence or absence of p16 expression. We conducted face-to-face interviews with 108 patients newly diagnosed with melanoma to ascertain their history of sun exposure, and recorded various phenotypic parameters. Paraffin sections of tumours from these patients were stained with an anti-p16 monoclonal antibody following antigen retrieval. Overall, 52 (48%) tumours expressed p16; nodular melanomas had significantly lower levels of p16 immunoreactivity than superficial spreading melanomas (P = 0.015). While no association was found between p16 expression and host phenotype, loss of p16 staining was associated with thicker lesions (p = 0.084) and a high mitotic index (P = 0.013). Taken together, these findings are consistent with loss of p16 being a late event in the progression of sporadic primary melanomas, being associated with tumours of a more aggressive nature. (C) 2002 Lippincott Williams Wilkins.
Resumo:
Eucalyptus savannas on low nutrient soils are being extensively cleared in Queensland. In this paper we provide background information relevant to understanding nutrient (particularly nitrogen) dynamics in sub/tropical savanna, and review the available evidence relevant to understanding the potential impact of clearing Eucalyptus savanna on nutrient relations. The limited evidence presently available can be used to argue for the extreme positions that: (i) woody vegetation competes with grasses Cor resources. and tree/shrub clearing improves pasture production, (ii) woody vegetation benefits pasture production. At present, the lack of fundamental knowledge about Australian savanna nutrient relations makes accurate predictions about medium- and long-term effects of clearing on nutrient relations in low nutrient savannas difficult. The future of cleared savannas will differ if herbaceous species maintain all functions that woody vegetation has previously held, or if woody species have functions distinct from those of herbaceous vegetation. Research suggests that savanna soils are susceptible to nitrate leaching, and that trees improve the nutrient status of savanna soils in some situations. The nitrogen capital of cleared savanna is at risk if mobile ions are not captured efficiently by the vegetation. and nitrogen input via N-2 fixation from vegetation and microbiotic crusts is reduced. In order to predict clearing effects on savanna nutrient relations, research should be directed to answering (i) how open or closed nutrient cycles are in natural and cleared savanna, (ii) which functions are performed by savanna constituents such as woody and herbaceous vegetation, native and exotic plant species. termites, and microbiotic 7 crusts in relation to nutrient cycles. In the absence of detailed knowledge about savanna functioning, clearing carries the risk of promoting continuous nutrient depiction.
Resumo:
Doped ceria (CeO2) compounds are fluorite-type oxides which show oxide ionic conductivity higher than yttria-stabilized zirconia in oxidizing atmosphere. As a consequence of this, considerable interest has been shown in applications of these materials for low or intermediate temperature operation of solid-oxide fuel cells (SOFCs). In this study, the effective index was suggested to maximize the ionic conductivity in La2O3-CeO2 based oxides. The index considers the fluorite structure, and combines the expected oxygen vacancy level with the ionic radius mismatch between host and dopant cations. Using this approach, the ionic conductivity of this system has been optimized and tested under operating conditions of SOFCs. LaxCe1-xO2-delta (x = 0.125, 0.15, 0.175, and 0.20), (LaxSr1-x)(0.175)Ce0.825O2-delta (x = 0.1, 0.2, and 0.4), and (La1-xSr0.2Bax)(0.175)Ce0.825O2-delta (x 5 0.03, 0.05, and 0.07) were prepared and characterized as the specimens with low, intermediate, and high index, respectively. The ionic conductivity was increased with increasing suggested index. The transmission electron microscopy analysis suggested that partial substitution of alkaline earth elements in place of La into Ce site contributes to a decrease of microdomain size and an improvement of conductivity. (La0.75Sr0.2Ba0.05)(0.175)Ce0.825O1.891 with high index and small microdomains exhibited the highest conductivity, wide ionic domain, and good performance in SOFCs. (C) 2003 The Electrochemical Society.
Resumo:
Three confirmed cases of acute iron tablet-induced necrosis due to a fulminant chemical burn injury to the tracheobronchial tree as a result of accidental inhalation and/or aspiration of iron tablets are described. Although histological confirmation has been relied upon for diagnosis, the distinctive bronchoscopic features may allow prompt recognition and treatment by bronchoscopists to prevent this potentially fatal condition.
Resumo:
Purpose: to evaluate and study the viability, stability and the ability of the Portuguese Football Federation (PFF) to generate sustained profits. Methodology: Data were collected based on the Audit Reports of the institution during 2012-2014 and a financial and economic analysis was performed in order to establish some indicators of solvability, profitability and financial balance. Findings: It exists a lack of consistency in managing the profits obtained. We can also suggest that should be given a greater interest to the management of their own intangible assets, as brand management, for example. Practical implications: By making known to leaders and managers of this type of institutions that exists a link between participation in international championships and increase of their profitability may encourage them to better managing these cash inputs in order to decrease the dependence of Governmental financing. We also found that the management of their own intangible assets, as brand management, for example, could probably add more positive financial results.
Resumo:
Effective environmental management within companies, integrated with other management areas like quality and occupational health and safety, is nowadays assumed to be a strategic way to implement and improve lean and cleaner production. Also, sustainable development (SD) and business sustainability can be achieved through a better coordinated management of processes versus associated resources. This paper presents an in depth discussion regarding the promotion of integrated management systems, their benefits and major contribution towards the sustainable development of cleaner production related features. It addresses issues regarding the contributions resulting from the integration of standardized Management System (MS) from both internal and external perspectives. Complementing the overall review of aspects to the development of integrated management systems a survey was conducted in order to better understand the relevance of the identified success factors. The main findings in this paper are as follows: a contextualization model of sustainable development and integrated management systems considering the Triple Bottom Line: economic, social and environmental; and, a method and associated model to support the development of integrated management systems as well as general guidelines to support integration. It can be concluded that a proactive approach and commitment to cleaner production, supported by an integrated management system, brings relevant savings for organizations as well as providing value to the relevant interested parties.
Resumo:
This paper reviews the understanding I have gained from several years of research, and from several more years of ongoing discussions with industry leaders regarding the nature of competitiveness among tourism destinations. This understanding has been captured, in summary form, in the model of Destination Competitiveness/Sustainability (Ritchie and Crouch, 2003). This model contains seven (7) components which we have found to play a major role, from a policy perspective, in determining the competitiveness/sustainability of a tourism destination. In addition to the valuable understanding which these seven components provide from a policy perspective, the specific elements of each the major components provide a more useful/practical guidance to those who are responsible for the ongoing management of a DMO (Destination Management Organization). With this overview in mind, this paper will provide a detailed review and explanation of the model that I have developed with colleague, Dr. Geoffrey I. Crouch of Latrobe University in Melbourne, Australia. Based on previous presentations throughout the world, it has proven very helpful to both academics and practitioners who seek to understand the complex nature of tourism destination competitiveness/sustainability.
Resumo:
Em estudos de acessibilidade, e não só, são muito úteis um tipo de estruturas que se podem obter a partir de uma rede, eventualmente multi-modal e parametrizável: as chamadas “áreas de serviço”, as quais são constituídas por polígonos, cada qual correspondente a uma zona situada entre um certo intervalo de custo, relativamente a uma certa “feature” (ponto, multiponto, etc.). Pretende-se neste estudo obter, a partir de áreas de serviço relativas a um universo de features, áreas de serviço relativas a subconjuntos dessas features. Estas técnicas envolvem manipulações relativamente complexas de polígonos e podem ser generalizadas para conjuntos de conjuntos e assim sucessivamente. Convém notar que nem sempre se dispõe da rede, podendo dispor-se das referidas estruturas; eventualmente, no caso de áreas de serviço, sob a forma de imagens (raster) a serem convertidas para formato vectorial.
Resumo:
Esta dissertação insere-se num projecto de investigação relacionado com o papel que a madeira apresenta na construção nos tempos de hoje, necessário para obtenção do Mestrado em Engenharia Civil. A madeira apresenta, enquanto material de construção, especificidades únicas: é um material orgânico, ao contrário da pedra, do aço e do betão; é um material combustível, sem que isto implique necessariamente uma baixa resistência ao fogo; é um material tradicional, presente em pavimentos e coberturas de edifícios antigos e é, paradoxalmente, um material novo, adoptado em arrojadas obras de arquitectura contemporânea. Estas características, associadas à necessidade de garantir a sustentabilidade da construção e de conservar e reabilitar o património edificado, tornam essencial o estudo das propriedades mecânicas do material, dos seus processos de degradação química e biológica, dos meios de protecção e do comportamento de elementos estruturais ao fogo. As estruturas em madeira têm tido uma procura crescente no nosso país, revelando-se uma opção interessante, como alternativa a estruturas de aço ou de betão. No entanto, por configurarem ainda soluções estruturais, materiais e processos construtivos pouco comuns entre nós, considera-se que não estão suficientemente divulgados os instrumentos de que podemos e devemos dispor para a garantia da qualidade destas estruturas. É apresentado um estudo de viabilidade económica no âmbito do nosso país, comparando casas em madeira, modulares pré-fabricadas, com casas cuja construção é feita em alvenaria e betão armado, de forma a poder comparar os custos para ambas as soluções construtivas. Para tal, foram realizadas visitas a empresas, fábricas e a obras com o objectivo de entender como funciona o processo de fabrico de uma casa pré-fabricada em madeira.