Aditivação de pastas geopoliméricas com tetraborato de sódio e látex não iônico para cimentação de Poços de Petróleo

The development of activities in the oil and gas sector has been promoting the search for materials more adequate to oilwell cementing operation. In the state of Rio Grande do Norte, the cement sheath integrity tend to fail during steam injection operation which is necessary to increase oil recovery in reservoir with heavy oil. Geopolymer is a material that can be used as alternative cement. It has been used in manufacturing of fireproof compounds, construction of structures and for controlling of toxic or radioactive waste. Latex is widely used in Portland cement slurries and its characteristic is the increase of compressive strength of cement slurries. Sodium Tetraborate is used in dental cement as a retarder. The addition of this additive aim to improve the geopolymeric slurries properties for oilwell cementing operation. The slurries studied are constituted of metakaolinite, potassium silicate, potassium hydroxide, non-ionic latex and sodium tetraborate. The properties evaluated were: viscosity, compressive strength, thickening time, density, fluid loss control, at ambient temperature (27 ºC) and at cement specification temperature. The tests were carried out in accordance to the practical recommendations of the norm API RP 10B. The slurries with sodium tetraborate did not change either their rheological properties or their mechanical properties or their density in relation the slurry with no additive. The increase of the concentration of sodium tetraborate increased the water loss at both temperatures studied. The best result obtained with the addition of sodium tetraborate was thickening time, which was tripled. The addition of latex in the slurries studied diminished their rheological properties and their density, however, at ambient temperature, it increased their compressive strength and it functioned as an accelerator. The increase of latex concentration increased the presence of water and then diminished the density of the slurries and increased the water loss. From the results obtained, it was concluded that sodium tetraborate and non-ionic latex are promising additives for geopolymer slurries to be used in oilwell cementing operation

Estudo paramétrico da recuperação de óleo no processo de drenagem gravitacional com injeção de CO2

The gas injection has become the most important IOR process in the United States. Furthermore, the year 2006 marks the first time the gas injection IOR production has surpassed that of steam injection. In Brazil, the installation of a petrochemical complex in the Northeast of Brazil (Bahia State) offers opportunities for the injection of gases in the fields located in the Recôncavo Basin. Field-scale gas injection applications have almost always been associated with design and operational difficulties. The mobility ratio, which controls the volumetric sweep, between the injected gas and displaced oil bank in gas processes, is typically unfavorable due to the relatively low viscosity of the injected gas. Furthermore, the difference between their densities results in severe gravity segregation of fluids in the reservoirs, consequently leading to poor control in the volumetric sweep. Nowadays, from the above applications of gas injection, the WAG process is most popular. However, in attempting to solve the mobility problems, the WAG process gives rise to other problems associated with increased water saturation in the reservoir including diminished gas injectivity and increased competition to the flow of oil. The low field performance of WAG floods with oil recoveries in the range of 5-10% is a clear indication of these problems. In order to find na effective alternative to WAG, the Gas Assisted Gravity Drainage (GAGD) was developed. This process is designed to take advantage of gravity force to allow vertical segregation between the injected CO2 and reservoir crude oil due to their density difference. This process consists of placing horizontal producers near the bottom of the pay zone and injecting gás through existing vertical wells in field. Homogeneous models were used in this work which can be extrapolated to commercial application for fields located in the Northeast of Brazil. The simulations were performed in a CMG simulator, the STARS 2007.11, where some parameters and their interactions were analyzed. The results have shown that the CO2 injection in GAGD process increased significantly the rate and the final recovery of oil

Influência da adição de gres porcelanato no comportamento mecânico e microestrutural em pastas de cimento portland para cimentação de poços de petróleo

Cementation operation consists in an extremely important work for the phases of perforation and completion of oil wells, causing a great impact on the well productivity. Several problems can occur with the cement during the primary cementation, as well as throughout the productive period. The corrective operations are frequent, but they are expensive and demands production time. Besides the direct cost, prejudices from the interruption of oil and gas production till the implementation of a corrective operation must be also taken into account. The purpose of this work is the development of an alternative cement paste constituted of Portland cement and porcelainized stoneware residue produced by ceramic industry in order to achieve characteristics as low permeability, high tenacity, and high mechanical resistance, capable of supporting various operations as production or oil wells recuperation. Four different concentration measures of hydrated paste were evaluated: a reference paste, and three additional ones with ceramic residue in concentrations of the order of 10%, 20% and 30% in relation to cement dough. High resistance and low permeability were found in high concentration of residues, as well as it was proved the pozolanic reactivity of the residue in relation to Portland cement, which was characterized through x-ray and thermogravimetry assays. It was evident the decrease of calcium hydroxide content, once it was substituted by formation of new hydrated products as it was added ceramic residue

Simulador de dano à formação, aplicado ao Projeto e à execução da perfuração de poços de petróleo

With the high oil price variability, the petroleum and the reservoir engineers are usually face to face on how they can evaluate the well performance and productivity. They can improve high productivity from the well construction to the secondary recoveries, but they have never tried a measurement in the drilling operations about the lower productivity index. As a rule, frequently the drilling operations hear from the reservoir engineering and geology that, if there is a formation damage, probably some drilling operations practices were not done properly or the good practice in petroleum engineering or mud engineering were not observed. The study in this working search is an attempt of how to measure a formation damage just from the project drilling to the drilling operations, with datum from the fields in Brazilian northeast and putting into practice a Simulator developed from the modeling on the theory offered by different experts and sources in formation damage

Incorporação de resíduo cerâmico para prevenção da retrogressão da resistência de cimentos de poços de petróleo submetidos à injeção de vapor

Steam injection is the most used thermal recovery method of oil nowadays because of the high degree of development of the technique that allows high recovery factors. However, injection of superheated steam into the reservoir affects the entire structure of the well, including the cemented layer that presents a retrogression of compressive strength and increases the permeability due to formation of more crystalline and denser phases at temperatures above 110 °C. These changes result in failures in the cement that favor the entrance of formation fluids into the annulus space resulting in unsafe operations and restrictions in the economic life of the well. But the strength retrogression can be prevented by partial replacement of cement by silica-based materials that reduce the CaO/SiO2 ratio of cement slurries changing the trajectory of the reactions, converting those deleterious phases in phases with satisfactory mechanical strength and permeability. The aim of this study was to evaluate the behavior of a ceramic waste material rich in silica in partial and total substitution of a mineral additive used to fight the strength retrogression of cement slurries subjected to high temperatures. The evaluation was made by compression, X-ray diffraction (XRD) and thermogravimetry (TG/DTG). The samples were submitted to a cycle of low temperature (38 °C) for 28 days and a cycle of low temperature followed by exposure to 280 ºC and 1000 psi by 3 days. The results showed that slurries with additions of up to 30% of the waste material are not enough to prevent the strength retrogression, while slurries with additions of the waste material combined with silica flour in various proportions produced hydrated products of low Ca/Si ratios that maintained the compressive strength at satisfactory levels

Análise comparativa entre simuladores de linha de fluxo e diferenças finitas para um reservatório de petróleo submetido a injeção de água

Water injection is the most widely used method for supplementary recovery in many oil fields due to various reasons, like the fact that water is an effective displacing agent of low viscosity oils, the water injection projects are relatively simple to establish and the water availability at a relatively low cost. For design of water injection projects is necessary to do reservoir studies in order to define the various parameters needed to increase the effectiveness of the method. For this kind of study can be used several mathematical models classified into two general categories: analytical or numerical. The present work aims to do a comparative analysis between the results presented by flow lines simulator and conventional finite differences simulator; both types of simulators are based on numerical methods designed to model light oil reservoirs subjected to water injection. Therefore, it was defined two reservoir models: the first one was a heterogeneous model whose petrophysical properties vary along the reservoir and the other one was created using average petrophysical properties obtained from the first model. Comparisons were done considering that the results of these two models were always in the same operational conditions. Then some rock and fluid parameters have been changed in both models and again the results were compared. From the factorial design, that was done to study the sensitivity analysis of reservoir parameters, a few cases were chosen to study the role of water injection rate and the vertical position of wells perforations in production forecast. It was observed that the results from the two simulators are quite similar in most of the cases; differences were found only in those cases where there was an increase in gas solubility ratio of the model. Thus, it was concluded that in flow simulation of reservoirs analogous of those now studied, mainly when the gas solubility ratio is low, the conventional finite differences simulator may be replaced by flow lines simulator the production forecast is compatible but the computational processing time is lower.

Estudo dos parâmetros operacionais do processo de combustão in situ em reservatório de petróleo pesado

The occurrence of heavy oil reservoirs have increased substantially and, due to the high viscosity characteristic of this type of oil, conventional recovery methods can not be applied. Thermal methods have been studied for the recovery of this type of oil, with a main objective to reduce its viscosity, by increasing the reservoir temperature, favoring the mobility of the oil and allowing an increasing in the productivity rate of the fields. In situ combustion (ISC) is a thermal recovery method in which heat is produced inside the reservoir by the combustion of part of the oil with injected oxygen, contrasting with the injection of fluid that is heated in the surface for subsequent injection, which leads to loss heat during the trajectory to the reservoir. The ISC is a favorable method for recovery of heavy oil, but it is still difficult to be field implemented. This work had as an objective the parametric analysis of ISC process applied to a semi-synthetic reservoir with characteristics of the Brazilian Northeast reservoirs using vertical production and vertical injection wells, as the air flow injection and the wells completions. For the analysis, was used a commercial program for simulation of oil reservoirs using thermal processes, called Steam, Thermal and Advanced Processes Reservoir Simulator (STARS) from Computer Modelling Group (CMG). From the results it was possible to analyze the efficiency of the ISC process in heavy oil reservoirs by increasing the reservoir temperature, providing a large decrease in oil viscosity, increasing its mobility inside the reservoir, as well as the improvement in the quality of this oil and therefore increasing significantly its recovered fraction. Among the analyzed parameters, the flow rate of air injection was the one which had greater influence in ISC, obtaining higher recovery factor the higher is the flow rate of injection, due to the greater amount of oxygen while ensuring the maintenance of the combustion front

Análise da recuperação em reservatório de gás com baixa permeabilidade (TIGHT GAS) através do fraturamento hidráulico

With the increasing of energetic consumption in the worldwile, conventional reservoirs, known by their easy exploration and exploitation, are not being enough to satisfy this demand, what has made necessary exploring unconventional reservoirs. This kind of exploration demands developing more advanced technologies to make possible to exploit those hydrocarbons. Tight gas is an example of this kind of unconventional reservoir. It refers to sandstone fields with low porosity, around 8%, and permeabilities between 0.1 and 0.0001 mD, which accumulates considerable amounts of natural gas. That natural gas can only be extracted by applying hydraulic fracturing, aiming at stimulating the reservoir, by creating a preferential way through the reservoir to the well, changing and making easier the flow of fluids, thus increasing the productivity of those reservoirs. Therefore, the objective of this thesis is analyzing the recovery factor of a reservoir by applying hydraulic fracturing. All the studies were performed through simulations using the IMEX software, by CMG (Computer Modelling Group), in it 2012.10 version

Um modelo matemático baseado em wavelets para análise do método térmico de recuperação de óleo pesado aplicando irradiação eletromagnética

This work proposes a model to investigate the use of a cylindrical antenna used in the thermal method of recovering through electromagnetic radiation of high-viscosity oil. The antenna has a simple geometry, adapted dipole type, and it can be modelled by using Maxwell s equation. The wavelet transforms are used as basis functions and applied in conjunction with the method of moments to obtain the current distribution in the antenna. The electric field, power and temperature distribution are carefully calculated for the analysis of the antenna as electromagnetic heating. The energy performance is analyzed based on thermo-fluid dynamic simulations at field scale, and through the adaptation in the Steam Thermal and Advanced Processes Reservoir Simulator (STARS) by Computer Modelling Group (CMG). The model proposed and the numerical results obtained are stable and presented good agreement with the results reported in the specialized literature

A Experiência de dor no doente oncológico com doença avançada

Introdução: O pós-parto abrange o processo de transição para a parentalidade, considerado um dos principais momentos de transição ao longo da vida, responsável por mudanças a vários níveis, nomeadamente individual, conjugal, familiar e social, implicando gestão de novos sentimentos, comportamentos e preocupações com o(a) próprio(a) e com o(s), filho(s) (Kaitz, 2007; Mendes, 2009). Esta revisão integrativa da literatura foca-se nas preocupações da figura materna da díade parental no período pós-parto. Objetivos: Analisar os estudos de investigação acerca da temática das preocupações maternas no pós-parto nas sociedades contemporâneas. Metodologia: Revisão integrativa da literatura centrada na temática “preocupações maternas no pós-parto”. Utilizouse o motor de busca EBSCOhost, com acesso às bases de dados científicos: CINAHL® Complete; MEDLINE Complete; Cochrane Database of Systematic Reviews; Cochrane Methodology Register; e ainda a base de dados SCIELO ”. Obtiveramse 17 publicações científicas com a utilização do Boolean search operators “AND”, para os descritores MeSH pósparto/“ postpartum” e nascimento/“childbirth” e como tema principal “preocupações maternas”/“maternal concerns”, com disponibilidade para aceder ao texto completo, com data de publicação entre o período de Janeiro 2000 e Dezembro 2015. Resultados: Os resultados da revisão integrativa da literatura acerca da temática das preocupações maternas que pretendeu responder à questão - Quais as preocupações maternas durante o pós-parto nas sociedades contemporâneas? - agruparam-se em 5 áreas: preocupações maternas e o cuidar do recém-nascido; preocupações maternas e recuperação funcional; preocupações maternas e transição para a parentalidade; preocupações maternas e relacionamento conjugal; e preocupações maternas intergeracionais. Conclusões: Da revisão dos artigos selecionados verificou-se que as preocupações maternas refletem as necessidades das mães, no período de transição de pós-parto, assim como, as assinaladas alterações no assumir de novos papéis e da redefinição/reorganização nas responsabilidades, no seio da díade parental/família e deste modo, espelham uma área de interesse no âmbito dos cuidados à mulher/casal e família após o nascimento de um filho, de onde as intervenções de enfermagem especializada em saúde materna e obstetrícia são relevantes na avaliação da transição saudável no contexto do pós-parto, quer na vertente materna, quer na díade parental e no cuidar do recém-nascido. Palavras-chave: pós-parto; preocupações maternas; recém-nascido; nascimento Referências bibliográficas: Kaitz, M. (2007). Maternal concerns during early parenthood. Child: Care, Health and Development, 33(6), 720-727. Lugina, H., Christensson, K., Massawe, S., Nystrom, L., & Lindmark, G. (2001). Change in maternal concerns during the 6 weeks postpartum period: A study of primiparous mothers in Dar es Salaam, Tanzania. Journal of Midwifery & Women’s Health, 46(4), 248-257. doi: 10.1016/S1526-9523(01)00133-7 Lugina, H., Nyström, L., Christensson, K., & Lindmark, G. (2004). Assessing mothers’ concerns in the postpartum period: Methodological issues. Journal of Advanced Nursing, 48(3), 279-290. doi: 10.1111/j.1365-2648.2004.03197.x Mendes, I. M. (2009). Ajustamento materno e paterno: Experiências vivenciadas pelos pais no pós-parto. Coimbra, Portugal: Mar da Palavra. * Escola Superior de Enfermagem de Coimbra, Unidade Científico-Pedagógica de Enfermagem de Saúde Materna e Obstetrícia [ana@esenfc.pt] ** Escola Superior de Enfermagem de Coimbra, Enfermagem de Saúde Materna, Obstetrícia e Ginecologia, Professora C

La redefinición de la agenda socialdemócrata entre la crisis del petróleo y el fin del socialismo real (1973-1992)

Resumen: El objetivo de este artículo es mostrar las estrategias de las organizaciones socialdemócratas frente a los nuevos desafíos que surgieron con la crisis del petróleo y la aparición de los llamados “valores posmateriales”. Se profundizará en una de las principales: el aumento de la actividad política trasnacional y la creación de comisiones que trabajaron aspectos relacionados con el desarrollo, la seguridad, el armamentismo nuclear y el medio ambiente. Estas comisiones no solo constituyeron un importante cambio frente a las tradiciones precedentes, también influyeron significativamente los desarrollos posteriores en dichas materias

Lei de falências e de recuperação de empresas

Regula a recuperação judicial, a extrajudicial e a falência do empresário e da sociedade empresária.

Petróleo

Coletânea sobre os antecedentes da Política Nacional do Petróleo e das atribuições do Conselho Nacional do Petróleo; incluindo legislação, discursos parlamentares, estudos especializados, memoriais, investigações oficiosas e particulares que permitem uma visão da história econômica do petróleo brasileiro. Reúne projetos, requerimentos e outros documentos parlamentares, do período de 1824 a 1957, que precederam ao projeto da Petrobrás, da tramitação na Câmara dos Deputados e no Senado Federal até à reunião do Congresso para decidir sobre o veto. Inclui inquéritos da comissão especializada sobre a Petrobrás em atividade.

A reserva estatal de atividade econômica e a propriedade do petróleo e do gás natural

A partir de uma pesquisa histórica sobre a regulação da atividade petrolífera nacional, constatou-se que as jazidas de petróleo e de gás natural são bens públicos cuja exploração é constitucionalmente reservada ao Estado. Ademais, a delegação da exploração desses bens, por meio de concessão ou de partilha de produção, mantém a propriedade estatal desses recursos naturais.

Constitucionalidade da Lei do petróleo e da adoção de novos regimes de contratação

Consultoria Legislativa - Área XII - Recursos Minerais, Hídricos e Energéticos.