Reliable link quality estimation in low-power wireless networks and its impact on tree-routing

Radio link quality estimation is essential for protocols and mechanisms such as routing, mobility management and localization, particularly for low-power wireless networks such as wireless sensor networks. Commodity Link Quality Estimators (LQEs), e.g. PRR, RNP, ETX, four-bit and RSSI, can only provide a partial characterization of links as they ignore several link properties such as channel quality and stability. In this paper, we propose F-LQE (Fuzzy Link Quality Estimator, a holistic metric that estimates link quality on the basis of four link quality properties—packet delivery, asymmetry, stability, and channel quality—that are expressed and combined using Fuzzy Logic. We demonstrate through an extensive experimental analysis that F-LQE is more reliable than existing estimators (e.g., PRR, WMEWMA, ETX, RNP, and four-bit) as it provides a finer grain link classification. It is also more stable as it has lower coefficient of variation of link estimates. Importantly, we evaluate the impact of F-LQE on the performance of tree routing, specifically the CTP (Collection Tree Protocol). For this purpose, we adapted F-LQE to build a new routing metric for CTP, which we dubbed as F-LQE/RM. Extensive experimental results obtained with state-of-the-art widely used test-beds show that F-LQE/RM improves significantly CTP routing performance over four-bit (the default LQE of CTP) and ETX (another popular LQE). F-LQE/RM improves the end-to-end packet delivery by up to 16%, reduces the number of packet retransmissions by up to 32%, reduces the Hop count by up to 4%, and improves the topology stability by up to 47%.

O empreendedorismo como opção de (re)inserção profissional

Este artigo procura evidenciar o empreendedorismo enquanto mecanismo de resposta à (re)inserção social, entendido enquanto necessidade ou oportunidade. Para além da apresentação do empreendedorsimo enquanto opção individual, destaca-se o papel que as universidades e institutos politécnicos devem assumir no desenvolvimento do espírito empreendedor no cluster dos recém-licenciados.

BoaVista – Sensor Dedicado de Visão Artificial Baseado em Hardware (Re)configurável

4º Festival Nacional de Robótica - Actas do Encontro Científico - Proceedings of the Scientific Meeting, Biblioteca Almeida Garrett, Palácio de Cristal – Porto, 23-24 Abril 2004

Deixem que eu me (re)encontre

O presente relatório reflete um projeto de investigação no âmbito do Mestrado em Educação e Intervenção Social, que assume como metodologia a Investigação Ação-Participativa, e que é desenvolvido e construído com um grupo de pessoas desempregadas. Assim, e contando com os participantes como co-construtores de todo o processo, foi necessário elaborar uma análise e caracterização da realidade da qual surgiram alguns problemas. É com base neles que o projeto começa a ser delineado, tendo por base a educação não-formal de adultos, e recorrendo a ações e atividades para se alcançarem os objetivos definidos e, desta forma, ser possível compreender qual o impacto que ele teve na vida dos participantes. Denominado por “Deixem que eu me (Re)Encontre”, este projeto de investigação pretendeu proporcionar momentos de desenvolvimento da autoestima, de redescoberta de capacidades e competências, e de criação de uma rede de suporte afetivo, estimulando nos participantes a apropriação de um poder de intervenção, gerador de mudança nas suas vidas, que há muito se tinha perdido.

DU GRAIN À LA MUSIQUE : MANIPULATIONS EN TEMPS RÉEL

Dans cet article, nous présenterons une étude comparative de quelques techniques de manipulation du signal comme la Transformée de Fourier à Court Terme, la Synthèse Granulaire Asynchrone et PSOLA, notamment dans le cadre de leur utilisation en temps réel. Nous présenterons succinctement le fonctionnement de ces trois méthodes dans l’environnement Max / MSP avec l’utilisation de la librairie GABOR. La manipulation des paramètres propres à chaque méthode a des conséquences sur les variables musicales, et l’utilisation de ces méthodes implique des corrélations entre les paramètres techniques du traitement du signal et des attributs musicaux spécifiques. Ainsi, nous essayerons d’explorer les espaces des paramètres et de la perception musicales entre le temps, la période et le spectre (les rythmes, les fréquences et les timbres) en comparant les différentes méthodes en vue de leur croisement dans un système de traitement commun.

La notion d’Espace dans la création musicale : idées, concepts et attributions Une réflexion à propos d’espaces intentionnellement perçus ou composés de l’entité sonore

Notre étude présente une réflexion à propos de espaces musicaux composables. Cette réflexion inclue l’usage intentionnel des qualités sonores perçues dans la construction de sons et donc dans la composition musicale. Nos recherches se trouvent à l’intersection entre le son, comme phénomène physique qui se propage dans un espace, les sensations spatiales qui peuvent être engendrées par la perception auditive de ses certaines caractéristiques, et la pratique de la composition musicale d’espaces de sons dans les œuvres. Nous développons l’idée d’une entité sonore composable dès sa microstructure. Nous la concevons par analogie avec les objets du monde visible et palpable. Nous utilisons les idées de volume, forme et matière ainsi que celles de position et de mouvement des objets matériels, comme métaphore pour concevoir des entités sonores complexes et des espaces musicaux composés dans lesquels elles seront intégrées. Cette entité sonore constituée d’un ensemble d’éléments disparates, permet le développement de réseaux opératoires manipulables dans, la pratique, par les compositeurs.

Quelques réflexions sur les rapports entre l’électroacoustique et la musique instrumentale de Xenakis : le cas de la Légende d’Eer et Jonchaies

Dans cet article, nous mettrons en évidence le rapport étroit tissé par Xenakis entre les œuvres La légende d’Eer et Jonchaies notamment au niveau de la structure formelle et des sonorités. // In this paper, we will show some evident examples about the close rapports between La légende d’Eer and Jonchaies by Xenakis, especially in terms of formal structure and sonorities.

Re-Use Assessment of Thermoset Composite Wastes as Aggregate and Filler Replacement for Concrete-Polymer Composite Materials: A case study regarding GFRP pultrusion wastes

Glass fibre-reinforced plastics (GFRP), nowadays commonly used in the construction, transportation and automobile sectors, have been considered inherently difficult to recycle due to both the cross-linked nature of thermoset resins, which cannot be remoulded, and the complex composition of the composite itself, which includes glass fibres, polymer matrix and different types of inorganic fillers. Hence, to date, most of the thermoset based GFRP waste is being incinerated or landfilled leading to negative environmental impacts and additional costs to producers and suppliers. With an increasing awareness of environmental matters and the subsequent desire to save resources, recycling would convert an expensive waste disposal into a profitable reusable material. In this study, the effect of the incorporation of mechanically recycled GFRP pultrusion wastes on flexural and compressive behaviour of polyester polymer mortars (PM) was assessed. For this purpose, different contents of GFRP recyclates (0%, 4%, 8% and 12%, w/w), with distinct size grades (coarse fibrous mixture and fine powdered mixture), were incorporated into polyester PM as sand aggregates and filler replacements. The effect of the incorporation of a silane coupling agent was also assessed. Experimental results revealed that GFRP waste filled polymer mortars show improved mechanical behaviour over unmodified polyester based mortars, thus indicating the feasibility of GFRP waste reuse as raw material in concrete-polymer composites.

Sustainability Improvement of a composite materials’ industry through recycling and re-engineering process approaches

Recent Advances in Mechanics and Materials in Design

Equipamentos colectivos e (re)estruturação do espaço urbano: aplicação a três bairros de Lisboa

Dissertação apresentada para cumprimento dos requisitos necessários à obtenção do grau de Mestre em Gestão do Território, Área de Especialização em Planeamento e Ordenamento do Território

Waste collection routing-limited multiple landfills and heterogeneous fleet

This article deals with a real-life waste collection routing problem. To efficiently plan waste collection, large municipalities may be partitioned into convenient sectors and only then can routing problems be solved in each sector. Three diverse situations are described, resulting in three different new models. In the first situation, there is a single point of waste disposal from where the vehicles depart and to where they return. The vehicle fleet comprises three types of collection vehicles. In the second, the garage does not match any of the points of disposal. The vehicle is unique and the points of disposal (landfills or transfer stations) may have limitations in terms of the number of visits per day. In the third situation, disposal points are multiple (they do not coincide with the garage), they are limited in the number of visits, and the fleet is composed of two types of vehicles. Computational results based not only on instances adapted from the literature but also on real cases are presented and analyzed. In particular, the results also show the effectiveness of combining sectorization and routing to solve waste collection problems.

Quality-of-service aware routing for static and mobile IPv6-based low-power and lossy sensor networks using RPL

The Internet of Things (IoT) has emerged as a paradigm over the last few years as a result of the tight integration of the computing and the physical world. The requirement of remote sensing makes low-power wireless sensor networks one of the key enabling technologies of IoT. These networks encompass several challenges, especially in communication and networking, due to their inherent constraints of low-power features, deployment in harsh and lossy environments, and limited computing and storage resources. The IPv6 Routing Protocol for Low Power and Lossy Networks (RPL) [1] was proposed by the IETF ROLL (Routing Over Low-power Lossy links) working group and is currently adopted as an IETF standard in the RFC 6550 since March 2012. Although RPL greatly satisfied the requirements of low-power and lossy sensor networks, several issues remain open for improvement and specification, in particular with respect to Quality of Service (QoS) guarantees and support for mobility. In this paper, we focus mainly on the RPL routing protocol. We propose some enhancements to the standard specification in order to provide QoS guarantees for static as well as mobile LLNs. For this purpose, we propose OF-FL (Objective Function based on Fuzzy Logic), a new objective function that overcomes the limitations of the standardized objective functions that were designed for RPL by considering important link and node metrics, namely end-to-end delay, number of hops, ETX (Expected transmission count) and LQL (Link Quality Level). In addition, we present the design of Co-RPL, an extension to RPL based on the corona mechanism that supports mobility in order to overcome the problem of slow reactivity to frequent topology changes and thus providing a better quality of service mainly in dynamic networks application. Performance evaluation results show that both OF-FL and Co-RPL allow a great improvement when compared to the standard specification, mainly in terms of packet loss ratio and average network latency. 2015 Elsevier B.V. Al