Radiology VFM Studies Regional Summary July 1999 (PDF 1435 KB)

Report Published July 1999

Radiology Services in NI Follow Up Regional Summary (PDF 1243 KB)

Report Published June 2001 - Contains key recommendations and the way forward

Optimization of spatial resolution for peripheral magnetic resonance angiography.

RATIONALE AND OBJECTIVES: To determine optimum spatial resolution when imaging peripheral arteries with magnetic resonance angiography (MRA). MATERIALS AND METHODS: Eight vessel diameters ranging from 1.0 to 8.0 mm were simulated in a vascular phantom. A total of 40 three-dimensional flash MRA sequences were acquired with incremental variations of fields of view, matrix size, and slice thickness. The accurately known eight diameters were combined pairwise to generate 22 "exact" degrees of stenosis ranging from 42% to 87%. Then, the diameters were measured in the MRA images by three independent observers and with quantitative angiography (QA) software and used to compute the degrees of stenosis corresponding to the 22 "exact" ones. The accuracy and reproducibility of vessel diameter measurements and stenosis calculations were assessed for vessel size ranging from 6 to 8 mm (iliac artery), 4 to 5 mm (femoro-popliteal arteries), and 1 to 3 mm (infrapopliteal arteries). Maximum pixel dimension and slice thickness to obtain a mean error in stenosis evaluation of less than 10% were determined by linear regression analysis. RESULTS: Mean errors on stenosis quantification were 8.8% +/- 6.3% for 6- to 8-mm vessels, 15.5% +/- 8.2% for 4- to 5-mm vessels, and 18.9% +/- 7.5% for 1- to 3-mm vessels. Mean errors on stenosis calculation were 12.3% +/- 8.2% for observers and 11.4% +/- 15.1% for QA software (P = .0342). To evaluate stenosis with a mean error of less than 10%, maximum pixel surface, the pixel size in the phase direction, and the slice thickness should be less than 1.56 mm2, 1.34 mm, 1.70 mm, respectively (voxel size 2.65 mm3) for 6- to 8-mm vessels; 1.31 mm2, 1.10 mm, 1.34 mm (voxel size 1.76 mm3), for 4- to 5-mm vessels; and 1.17 mm2, 0.90 mm, 0.9 mm (voxel size 1.05 mm3) for 1- to 3-mm vessels. CONCLUSION: Higher spatial resolution than currently used should be selected for imaging peripheral vessels.

The cognitive errors and coping patterns of child molesters as assessed by external observers: a pilot study

Cognitive errors (CE) and coping strategies (CS) are the focus of most cognitive-behavioral treatments for incarcerated child molesters. Several studies have reported differences in CEs and CSs between child molesters and controls. However, the vast majority of these studies assessed cognitive errors and coping using questionnaires, which are known to present a number of important limitations. This pilot study aimed to compare the CEs and CSs of N = 17 incarcerated child abusers and N = 12 controls using observer-rated methods, namely the Cognitive Error Rating Scale (CERS; Drapeau et al., 2005) and the Coping Action Pattern Rating Scale (CAPRS; Perry, Drapeau, & Dunkley, 2005). Results showed that child molesters presented more cognitive errors, in particular positive selective abstraction, and lower coping functioning, such as escape strategies. Treatment and research implications, including the use of observer-rated methods, are discussed.

La psychothérapie en région romande: un regard en arrière, une projection vers l'avant

Les auteurs Valentino Pomini, Yves de Roten et Nicolas Favez dressent le bilan de l'évolution de la psychothérapie en Suisse romande au cours des 25 dernières années. Ils expliquent notamment comment s'est construite la place des psychologues dans le champ de la psychothérapie, et celle des différents courants en psychothérapie, jusqu'au développement d'une collaboration qui tend vers la maturité.

Change in cognitive errors and coping over the course of brief psychodynamic intervention.

OBJECTIVE: Cognitive change over the course of psychodynamic psychotherapy has been postulated by several models, but has rarely been studied. Based on the adaptive skills model (Badgio, Halperin, & Barber, 1999), it is reasonable to expect that very brief dynamic psychotherapy may be associated with change in coping patterns and cognitive errors (also known as cognitive distortions) y. METHOD: N = 50 outpatients presenting with various psychiatric disorders and undergoing 4 sessions of Brief Psychodynamic Intervention (BPI; Despland, Drapeau, & de Roten, 2005; Despland, Michel, & de Roten, 2010) were included in this naturalistic study (mean age: 31 years; 56% female; all Caucasian). Cognitive errors and coping strategies were assessed using the Cognitive Errors Rating Scale (Drapeau et al., 2008) and Coping Patterns Rating Scale (Perry et al., 2005). These observer rated methods were applied to the verbatim transcriptions of all 4 therapy sessions completed by each patient. RESULTS: Results indicate change in both cognitive errors and coping patterns over the course of BPI, including an increase in the Overall Coping Functioning and a decrease in unhelpful coping processes, such as isolation, which reflects a shift in participant appraisal towards stress appraised as a challenge at the end of treatment. These changes predicted symptom change at the end of treatment. While cognitive errors also changed over the course of BPI, no predictive effect was found with regard to symptom change. CONCLUSIONS: These results are interpreted within the framework of common change principles in psychotherapy. Implications and future research are discussed.

Individual monitoring of medical staff working in interventional radiology in Switzerland using double dosimetry

Physicians who frequently perform fluoroscopic examinations are exposed to high intensity radiation fields. The exposure monitoring is performed with a regular personal dosimeter under the apron in order to estimate the effective dose. However, large parts of the body are not protected by the apron (e.g. arms, head). Therefore, it is recommended to wear a supplemental dosimeter over the apron to obtain a better representative estimate of the effective dose. The over-apron dosimeter can also be used to estimate the eye lens dose. The goal of this study was to investigate the relevance of double dosimetry in interventional radiology. First the calibration procedure of the dosimeters placed over the apron was tested. Then, results of double dosimetry during the last five years were analyzed. We found that the personal dose equivalent measured over a lead apron was underestimated by ∼20% to ∼40% for X-ray beam qualities used in radiology. Measurements made over five-year period confirm that the use of a single under-apron dosimeter is inadequate for personnel monitoring. Relatively high skin dose (>10 mSv/month) would have remained undetected without a second dosimeter placed on the apron.

Dix erreurs a ne pas commettre lors de la prise en charge d'une prothèse articulaire infectée en orthopédie [Ten errors to avoid while dealing with infected total joint arthroplasties].

Infections after total joint arthroplasty are rare but come with severe consequences. Timely, adequate and standardized treatment beginning at the onset of symptoms will have a major impact on the handling of this dreaded complication. In absences of clear guidelines, errors are often committed, with occasionally severe consequences for the patient. In this article, the 10 most frequent errors starting with diagnostics till antibiotic and surgical treatment will be discussed.

Overview of coded light projection techniques for automatic 3D profiling

Obtaining automatic 3D profile of objects is one of the most important issues in computer vision. With this information, a large number of applications become feasible: from visual inspection of industrial parts to 3D reconstruction of the environment for mobile robots. In order to achieve 3D data, range finders can be used. Coded structured light approach is one of the most widely used techniques to retrieve 3D information of an unknown surface. An overview of the existing techniques as well as a new classification of patterns for structured light sensors is presented. This kind of systems belong to the group of active triangulation method, which are based on projecting a light pattern and imaging the illuminated scene from one or more points of view. Since the patterns are coded, correspondences between points of the image(s) and points of the projected pattern can be easily found. Once correspondences are found, a classical triangulation strategy between camera(s) and projector device leads to the reconstruction of the surface. Advantages and constraints of the different patterns are discussed

Behaviours implemented using a vision system based on coded light projection

In a search for new sensor systems and new methods for underwater vehicle positioning based on visual observation, this paper presents a computer vision system based on coded light projection. 3D information is taken from an underwater scene. This information is used to test obstacle avoidance behaviour. In addition, the main ideas for achieving stabilisation of the vehicle in front of an object are presented

An overview of the advantages and constraints of coded pattern projection techniques for autonomous navigation

The absolute necessity of obtaining 3D information of structured and unknown environments in autonomous navigation reduce considerably the set of sensors that can be used. The necessity to know, at each time, the position of the mobile robot with respect to the scene is indispensable. Furthermore, this information must be obtained in the least computing time. Stereo vision is an attractive and widely used method, but, it is rather limited to make fast 3D surface maps, due to the correspondence problem. The spatial and temporal correspondence among images can be alleviated using a method based on structured light. This relationship can be directly found codifying the projected light; then each imaged region of the projected pattern carries the needed information to solve the correspondence problem. We present the most significant techniques, used in recent years, concerning the coded structured light method

An image quality comparison of standard and dual-side read CR systems for pediatric radiology.

An objective analysis of image quality parameters was performed for a computed radiography (CR) system using both standard single-side and prototype dual-side read plates. The pre-sampled modulation transfer function (MTF), noise power spectrum (NPS), and detective quantum efficiency (DQE) for the systems were determined at three different beam qualities representative of pediatric chest radiography, at an entrance detector air kerma of 5 microGy. The NPS and DQE measurements were realized under clinically relevant x-ray spectra for pediatric radiology, including x-ray scatter radiations. Compared to the standard single-side read system, the MTF for the dual-side read system is reduced, but this is offset by a significant decrease in image noise, resulting in a marked increase in DQE (+40%) in the low spatial frequency range. Thus, for the same image quality, the new technology permits the CR system to be used at a reduced dose level.