Accumulation rates and composition of organic matter in sediments off Peru

Deep-sea sediment samples from three Ocean Drilling Program (ODP) Leg 112 sites on the Peru continental margin were investigated, using a number of organic geochemical and organic petrographic techniques, for amounts and compositions of the organic matter preserved. Preliminary results include mass accumulation rates of organic carbon at Site 679 and characteristics of the organic facies for sediments from Sites 679, 681, and 684. Organic-carbon contents are high, with few exceptions. Particularly high values were determined in the Pliocene interval at Site 684 (4%-7.5%) and in the early Pliocene to Quaternary section of Hole 679D (2%-9%). Older sediments at this site have distinctively lower organic-carbon contents (0.2%-2.5%). Mass accumulation rates of organic matter at Site 679 are 0.02 to 0.07 g carbon/cm**2/k.y. for late Miocene to early Pliocene sediments and higher by a factor of 5 to 10 in the Quaternary sediments. The organic matter in all samples has a predominantly marine planktonic and bacterial origin, with minor terrigenous contribution. Organic particle sizes are strikingly small, so that only a minor portion is covered by visual maceral analysis. Molecular organic-geochemical data were obtained for nonaromatic hydrocarbons, aromatic hydrocarbons (including sulfur compounds), alcohols, ketones, esters, and carboxylic acids. Among the total extractable lipids, long-chain unsaturated ketones from Prymnesiophyte algae strongly predominate among the gas chromatography (GC) amenable components. Steroids are major constituents of the ketone and free- and bound-alcohol fractions. Perylene is the most abundant aromatic hydrocarbon, whereas in the nonaromatic hydrocarbon fractions, long-chain n-alkanes from higher land plants predominate, although the total terrigenous organic matter proportion in the sediments is small.

Sea-surface temperature reconstructions for the Quaternary western Atlantic

Paleotemperature estimates calculated by the SIMMAX Modern Analog Technique are presented for two gravity cores from the Rio Grande Rise, one from the Brazil Slope, and one from the Ceara Rise. The estimates are based on comparisons between modern and fossil planktonic foraminiferal assemblages and were carried out on samples from Quaternary sediments. Estimated warm-season temperatures from the Rio Grande Rise (at approx. 30° S) range from around 19°C to 24°C, with some coincidence of warm peaks with interglacial stages. The temperature estimates (also warm-season) from the more tropical Brazil Slope (at approx. 8° S) and Ceara Rise (at approx. 4° N) cores are more stable, remaining between 26°C and 28°C throughout most of their lengths. This fairly stable situation in the tropical western Atlantic is interrupted in oxygen isotope stage 6 by a significant drop of 2-3°C in both of these cores. Temperature estimates from the uppermost samples in all cores compare very well to the modern-day measured values. Affinities of some foraminiferal species for warmer or cooler surface temperatures are identified within the temperature range of the examined samples based on their abundance values. Especially notable among the warmer species are, Globorotalia menardii, Globigerinita glutinata, Globigerinoides ruber, and Globigerinoides sacculifer. Species indicative of cooler surface temperatures include Globorotalia inflata, Globigerina bulloides, Neogloboquadrina pachyderma, and Globigerina falconensis. A cluster analysis was carried out to assist in understanding the degree of variation which occurs in the foraminiferal assemblages, and how temperature differences influence the faunal compositions of the samples. It is demonstrated that fairly similar samples may have unexpectedly different estimated temperatures due to small differences in key species and, conversely, quite different assemblages can result in similar or identical temperature estimates which confirms that other parameters than just temperature affect faunal content.

(Table 1) Distribution of planktic foraminifera in sediments from Core AMK4-410GC

Sediments in 36 cores recovered from the rift zone of the Reykjanes Ridge were dated on the basis of planktic foraminifera. Their ratios in samples were used to determine temperature of the water surface layer during the last glaciation. Benthic foraminifera were studied in 12 samples of surface sediments and in five cores, and conclusions made on changes in the bottom water layer from changes in composition of these benthic foraminifera.

(Table 2) Chemical composition of Fe-Mn nodules and volcanic glass in sediments of the Atlantic Ocean

Distribution pattern of titanium in Quaternary sediments of the Atlantic Ocean are examined on the base of 750 Ti and Fe determinations, and several dozen of complete chemical analyses. Analyses of surface sediment samples and sediment cores up to 6 m long were made. Stratigraphic levels from Middle Pleistocene to Holocene were identified from planktonic foraminifera. Distributions of Ti in recent and Pleistocene deposits were mapped. High titanium contents were found in sediments containing products of basalt vulcanism and in iron-manganese nodules. To determine origin of titanium concentrations in sediments, Ti/Fe ratios were calculated. Maximal values of this ratio were found in areas of basaltic volcanism and of intensive terrigenous sedimentation.

Age of bottom sediments from the South Atlantic Rise as indicated by 14C data for stations of R/V Professor Shtokman

Sedimentation of pelagic biogenic coccolithic-foraminiferal sediments predominates in the section of the South Atlantic ridge between 20° and 30°S. Sedimentation rate and thickness of Late Quaternary sediments differ in the rift valley, the crestal section of the ridge, its flanks and transform faults. Holocene and layers representing the most recent and pen¬ultimate continental glaciations and the last interglacial are distinguishable in the late Quaternary profile. During their development, changes in the mean annual sea surface temperature in the tropical zone of the South Atlantic were minimal, i.e. 1-2°C.

Bacteriohopanepolyol biomarkers of sediments from the Congo fan

The transport and deposition of terrestrially derived organic matter (TOM) into the ocean is an important but poorly constrained aspect of the modern global carbon cycle. A preliminary study of Late Quaternary sediments from the Congo deep sea fan (ODP leg 175, site 1075, 2 km water depth) and four surface samples from associated cores has confirmed the presence of proposed soil-specific bacteriohopanepolyol biomarkers (BHPs) including adenosylhopane, in samples to a depth of 89 m. Concentrations of soil marker BHPs are high in the upper sediment section (to 49 m) and the closest related surface sample (4913), supporting the case for these molecular markers as novel proxies for soil organic carbon (SOC) supply via riverine transport and subsequent burial. Distinct peaks for the markers at about 21, 34 and 60 m below surface level tentatively imply that the rate of TOM discharge from tropical Africa significantly increased at these times, possibly associated with periods of reduced soil stability in the Congo catchment.

(Table T3) Distribution of radiolarian taxa in sediments of ODP Leg 180 sites

Cores from the 11 sites drilled during Leg 180 showed radiolarian assemblages that appear only in the Quaternary sediments. The most diverse and well-preserved assemblages were found in hemipelagic sediments from Holes 1108A, 1110A, and 1115B.

O pórfiro dacítico de Valverde (Alcácer do Sal) idade Rb-Sr e suas implicações

The unexpected discovery of a small outcrop of igneous rock isolated within an extensive outcrop of Neogene and Quaternary sediments called for the attention of CEPUNL's researchers. The rock is a dacite whose Rb-Sr age (C. A. and M. H. C.) is 291 M. y. upper Carboniferous. Hence the dacite may be related to volcanism in the Santa Suzana tectonic basin.

Detailed 3D seismic imaging of a fault zone beneath Lake Geneva, Switzerland

An efficient high-resolution (HR) three-dimensional (3D) seismic reflection system for small-scale targets in lacustrine settings was developed. In Lake Geneva, near the city of Lausanne, Switzerland, the offshore extension of a complex fault zone well mapped on land was chosen for testing our system. A preliminary two-dimensional seismic survey indicated structures that include a thin (<40 m) layer of subhorizontal Quaternary sediments that unconformably overlie south-east-dipping Tertiary Molasse beds and a major fault zone (Paudeze Fault Zone) that separates Plateau and Subalpine Molasse (SM) units. A 3D survey was conducted over this test site using a newly developed three-streamer system. It provided high-quality data with a penetration to depths of 300 m below the water bottom of non-aliased signal for dips up to 30degrees and with a maximum vertical resolution of 1.1 m. The data were subjected to a conventional 3D processing sequence that included post-stack time migration. Tests with 3D pre-stack depth migration showed that such techniques can be applied to HR seismic surveys. Delineation of several horizons and fault surfaces reveals the potential for small-scale geologic and tectonic interpretation in three dimensions. Five major seismic facies and their detailed 3D geometries can be distinguished. Three fault surfaces and the top of a molasse surface were mapped in 3D. Analysis of the geometry of these surfaces and their relative orientation suggests that pre-existing structures within the Plateau Molasse (PM) unit influenced later faulting between the Plateau and SM. In particular, a change in strike of the PM bed dip may indicate a fold formed by a regional stress regime, the orientation of which was different from the one responsible for the creation of the Paudeze Fault Zone. This structure might have later influenced the local stress regime and caused the curved shape of the Paudeze Fault in our surveyed area.