Electronic Construction Collaboration System – Phase III, December 2011

This phase of the electronic collaboration project involved two major efforts: 1) implementation of AEC Sync (formerly known as Attolist), a web-based project management system (WPMS), on the Broadway Viaduct Bridge Project and the Iowa Falls Arch Bridge Project and 2) development of a web-based project management system for bridge and highway construction projects with less than $10 million in contract value. During the previous phase of this project (fiscal year 2010), the research team helped with the implementation process for AEC Sync and collected feedback from the Broadway Viaduct project team members before the start of the project. During the 2011 fiscal year, the research team collected the post-project surveys from the Broadway Viaduct project members and compared them to the pre-project survey results. The results of the AEC Sync implementation on the Broadway project were positive. The project members were satisfied with the performance of the AEC Sync software and how it facilitated document management and its transparency. In addition, the research team distributed, collected, and analyzed the pre-project surveys for the Iowa Falls Arch Bridge Project. The implementation of AEC Sync for the Iowa Falls Arch Bridge Project appears to also be positive, based on the pre-project surveys. The fourth phase of this electronic collaboration project involves the identification and implementation of a WPMS solution for smaller bridge and highway projects. The workflow for the shop drawing approval process for sign truss projects was documented and used to identify possible WPMS solutions. After testing and evaluating several WPMS solutions, Microsoft SharePoint Foundation’s site pages were selected to be pilot-tested on sign truss projects. Due to the limitation on the SharePoint license that the Iowa Department of Transportation (DOT) has, a file transfer protocol (FTP) site will be developed alongside this site to allow contractors to upload shop drawings to the Iowa DOT. The SharePoint site pages are expected to be ready for implementation during the 2012 calendar year.

Reforming the Iowa Civil Justice System, January 30, 2012

Executive Summary I. Survey The Task Force conducted a wide-ranging survey of more than 9,000 licensed Iowa attorneys and judges to obtain their input on a variety of civil justice system topics. The survey results helped inform the Task Force of problem areas in Iowa’s civil justice system. II. Two-Tier Justice System The Task Force recommends a pilot program based on a two-tier civil justice system. A two-tier system would streamline litigation processes—including rules of evidence and discovery disclosures—and reduce litigation costs of certain cases falling below a threshold dollar value. III. One Judge/One Case and Date Certain for Trial Some jurisdictions in Iowa have adopted one judge/one case and date certain for trial in certain cases. The assignment of one judge to each case for the life of the matter and the establishment of dates certain for civil trials could enhance Iowans’ access to the courts, improve judicial management, promote consistency and adherence to deadlines, and reduce discovery excesses. IV. Discovery Processes Reforms addressing inefficient discovery processes will reduce delays in and costs of litigation. Such measures include adopting an aspirational purpose for discovery rules to “secure the just, speedy, and inexpensive determination of every action,” holding discovery proportional to the size and nature of the case, requiring initial disclosures, limiting the number of expert witnesses, and enforcing existing rules. V. Expert Witness Fees The Task Force acknowledges the probable need to revisit the statutory additional daily compensation limit for expert witness fees. Leaving the compensation level to the discretion of the trial court is one potential solution. VI. Jurors Additions to the standard juror questionnaire would provide a better understanding of the potential jurors’ backgrounds and suitability for jury service. The Task Force encourages adoption of more modern juror educational materials and video. Rehabilitation of prospective jurors who express an unwillingness or inability to be fair should include a presumption of dismissal. VII. Video and Teleconferencing Options When court resources are constrained both by limited numbers of personnel and budget cuts, it is logical to look to video and teleconferencing technology to streamline the court process and reduce costs. The judicial branch should embrace technological developments in ways that will not compromise the fairness, dignity, solemnity, and decorum of judicial proceedings. VIII. Court-Annexed Alternative Dispute Resolution(ADR) Litigants and practitioners in Iowa are generally satisfied with the current use of private, voluntary ADR for civil cases. There is concern, however, that maintaining the status quo may have steep future costs. Court-annexed ADR is an important aspect of any justice system reform effort, and the Task Force perceives benefits and detriments to reforming this aspect of the Iowa civil justice system. IX. Relaxed Requirement of Findings of Fact and Conclusions of Law A rule authorizing parties to waive findings of fact and conclusions of law could expedite resolution of nonjury civil cases. X. Business (Specialty) Courts Specialty business courts have achieved widespread support across the country. In addition, specialty courts provide excellent vehicles for implementing or piloting other court innovations that may be useful in a broader court system context. A business specialty court should be and could be piloted in Iowa within the existing court system framework of the Iowa Judicial Branch. Appendix included as a separate document, is 176 pages.

Medicaid Value Management Program SFY 2008 Report Executive Summary, 2007

In June, 2007, the Commonwealth Fund released a report entitled, “Aiming Higher: Results from a State Scorecard on Health System Performance.” The report ranked states’ health care performance based upon four areas: access, quality, potentially avoidable use of hospitals and costs of care, and healthy lives. Iowa was ranked second overall and was the only state to rank in the top 25 percent on each of the four measures.1 Coupling the HEDIS measures and CAHPS survey results with the Commonwealth report outcomes provides additional information for determining how the state performs with regard to the health care system, in general, and the Medicaid program specifically. For the past five years the results of eight outcome measures encompassing children and adults, and preventive, chronic and acute care have been reported by the University of Iowa Public Policy Center (PPC). The PPC is the independent evaluator for the Medicaid managed care programs and assists the state in an effort to understand the process of care within the Medicaid program. Seven of the eight measures are recommended by the Centers for Medicare and Medicaid, while the eighth, annual dental visit, is used in recognition of the challenges found in providing dental care to Medicaid‐enrolled children and adults.

What is the value of forensic science? : an overview of the effectiveness of forensic science in the Australian criminal justice system project

Forensic science is increasingly relied upon by law enforcement to assist in solvingcrime and gaining convictions, and by the judicial system in the adjudication ofspecific criminal cases. However, the value of forensic science relative to the workinvolved and the outcome of cases has yet to be established in the Australiancontext. Previous research in this area has mainly focused on the science andtechnology, rather than examining how people can use forensic services/science tothe best possible advantage to produce appropriate justice outcomes. This fiveyearproject entails an investigation into the effectiveness of forensic science inpolice investigations and court trials. It aims to identify when, where and howforensic science can add value to criminal investigations, court trials and justiceoutcomes while ensuring the efficient use of available resources initially in theVictorian and the ACT criminal justice systems and ultimately across Australiaand New Zealand. This paper provides an overview of the rationale and aims ofthe research project and discusses current work-in-progress.

Success of referral for alcohol dependent patients from a general hospital : predictive value of patient and process characteristics

RESUME: Introduction L'objectif de cette étude prospective de cohorte était d'estimer l'efficacité d'un processus de prise en charge standardisé de patients dépendants de l'alcool dans le contexte d'un hôpital universitaire de soins généraux. Ce modèle de prise en charge comprenait une évaluation multidisciplinaire puis des propositions de traitements individualisées et spécifiques (« projet thérapeutique »). Patients et méthode 165 patients alcoolo-dépendants furent recrutés dans différents services de l'hôpital universitaire, y compris la policlinique de médecine. Ils furent dans un premier temps évalués par une équipe multidisciplinaire (médecin interniste, psychiatre, assistant social), puis un projet thérapeutique spécialisé et individualisé leur fut proposé lors d'une rencontre réunissant le patient et l'équipe. Tous les patients éligibles acceptant de participer à l'étude (n=68) furent interrogés au moment de l'inclusion puis 2 et 6 mois plus tard par une psychologue. Des informations standardisées furent recueillies sur les caractéristiques des patients, le processus de prise en charge et l'évolution à 6 mois. Les critères de succès utilisés à 6 mois furent: l'adhérence au traitement proposé et l'abstinence d'alcool. Résultats Lors de l'évaluation à 6 mois, 43% des patients étaient toujours en traitement et 28% étaient abstinents. Les variables prédictrices de succès parmi les caractéristiques des patients étaient un âge de plus de 45 ans, ne pas vivre seul, avoir un travail et être motivé pour un traitement (RAATE-A <18). Pour les variables dépendantes du processus de prise en charge, un sevrage complet de l'alcool lors de la rencontre multidisciplinaire ainsi que la présence de tous les membres de l'équipe à cette réunion étaient des facteurs associés au succès. Conclusion L'efficacité de ce modèle d'intervention pour patients dépendants de l'alcool en hôpital de soins généraux s'est montrée satisfaisante, en particulier pour le critère de succès adhérence au traitement. Des variables associées au succès ou à l'échec à 6 mois ont pu être mises en évidence, permettant d'identifier des populations de patients évoluant différemment. Des stratégies de prise en charge tenant compte de ces éléments pourraient donc être développées, permettant de proposer des traitements plus adaptés ainsi qu'une meilleure rétention des patients alcooliques dans les programmes thérapeutiques. ABSTRACT. To assess the effectiveness of a multidisciplinary evaluation and referral process in a prospective cohort of general hospital patients with alcohol dependence, alcohol-dependent patients were identified in the wards of the general hospital and its primary care center. They were evaluated and then referred to treatment by a multidisciplinary team; those patients who accepted to participate in this cohort study were consecutively included and followed for 6 months. Not included patients were lost for follow-up, whereas all included patients were assessed at time of inclusion, 2 and 6 months later by a research psychologist in order to collect standardized baseline patients' characteristics, process salient features and patients outcomes (defined as treatment adherence and abstinence). Multidisciplinary evaluation and therapeutic referral was feasible and effective, with a success rate of 43% for treatment adherence and 28% for abstinence at 6 months. Among patients' characteristics, predictors of success were an age over 45, not living alone, being employed and being motivated to treatment (RAATE-A score < 18), whereas successful process characteristics included detoxification of the patient at time of referral and a full multidisciplinary referral meeting. This multidisciplinary model of evaluation and referral of alcohol dependent patients of a general hospital had a satisfactory level of effectiveness. Predictors of success and failure allow the identification of subsets of patients for whom new strategies of motivation and treatment referral should be designed.

The development of an automatic recognition system for earmark and earprint comparisons

The value of earmarks as an efficient means of personal identification is still subject to debate. It has been argued that the field is lacking a firm systematic and structured data basis to help practitioners to form their conclusions. Typically, there is a paucity of research guiding as to the selectivity of the features used in the comparison process between an earmark and reference earprints taken from an individual. This study proposes a system for the automatic comparison of earprints and earmarks, operating without any manual extraction of key-points or manual annotations. For each donor, a model is created using multiple reference prints, hence capturing the donor within source variability. For each comparison between a mark and a model, images are automatically aligned and a proximity score, based on a normalized 2D correlation coefficient, is calculated. Appropriate use of this score allows deriving a likelihood ratio that can be explored under known state of affairs (both in cases where it is known that the mark has been left by the donor that gave the model and conversely in cases when it is established that the mark originates from a different source). To assess the system performance, a first dataset containing 1229 donors elaborated during the FearID research project was used. Based on these data, for mark-to-print comparisons, the system performed with an equal error rate (EER) of 2.3% and about 88% of marks are found in the first 3 positions of a hitlist. When performing print-to-print transactions, results show an equal error rate of 0.5%. The system was then tested using real-case data obtained from police forces.

Deep-hole drilling process, monitoring system and sensors modifications

 In the drilling processes and especially deep-hole drilling process, the monitoring system and having control on mechanical parameters (e.g. Force, Torque,Vibration and Acoustic emission) are essential. The main focus of this thesis work is to study the characteristics of deep-hole drilling process, and optimize the monitoring system for controlling the process. The vibration is considered as a major defect area of the deep-hole drilling process which often leads to breakage of the drill, therefore by vibration analysis and optimizing the workpiecefixture, this area is studied by finite element method and the suggestions are explained. By study on a present monitoring system, and searching on the new sensor products, the modifications and recommendations are suggested for optimize the present monitoring system for excellent performance in deep-hole drilling process research and measurements.

Value added logistics in supply and demand chain. Smile. Part 2. eBusiness in a service business. Case: A maintenance and operations network in forest industry

VVALOSADE is a research project of professor Anita Lukka's VALORE research team in the Lappeenranta University of Technology. The VALOSADE includes the ELO technology program of Tekes. SMILE is one of four subprojects of the VALOSADE. The SMILE study focuses on the case of the company network that is composed of small and micro-sized mechanical maintenance service providers and forest industry as large-scale customers. The basic principle of the SMILE study is the communication and ebusiness in supply and demand networks. The aim of the study is to develop ebusiness strategy, ebusiness model and e-processes among the SME local service providers, and onthe other hand, between the local service provider network and the forest industry customers in a maintenance and operations service business. A literature review, interviews and benchmarking are used as research methods in this qualitative case study. The first SMILE report, 'Ebusiness between Global Company and Its Local SME Supplier Network', concentrated on creating background for the SMILE study by studying general trends of ebusiness in supply chains and networks of different industries. This second phase of the study concentrates on case network background, such as business relationships, information systems and business objectives; core processes in maintenance and operations service network; development needs in communication among the network participants; and ICT solutions to respond needs in changing environment. In the theory part of the report, different ebusiness models and frameworks are introduced. Those models and frameworks are compared to empirical case data. From that analysis of the empirical data, therecommendations for the development of the network information system are derived. In process industry such as the forest industry, it is crucial to achieve a high level of operational efficiency and reliability, which sets up great requirements for maintenance and operations. Therefore, partnerships or strategic alliances are needed between the network participants. In partnerships and alliances, deep communication is important, and therefore the information systems in the network also are critical. Communication, coordination and collaboration will increase in the case network in the future, because network resources must be optimised to improve competitive capability of the forest industry customers and theefficiency of their service providers. At present, ebusiness systems are not usual in this maintenance network. A network information system among the forest industry customers and their local service providers actually is the only genuinenetwork information system in this total network. However, the utilisation of that system has been quite insignificant. The current system does not add value enough either to the customers or to the local service providers. At present, thenetwork information system is the infomediary that share static information forthe network partners. The network information system should be the transaction intermediary, which integrates internal processes of the network companies; the network information system, which provides common standardised processes for thelocal service providers; and the infomediary, which share static and dynamic information on right time, on right partner, on right costs, on right format and on right quality. This study provides recommendations how to develop this system in the future to add value to the network companies. Ebusiness scenarios, vision, objectives, strategies, application architecture, ebusiness model, core processes and development strategy must be considered when the network information system will be developed in the next development step. The core processes in the case network are demand/capacity management, customer/supplier relationship management, service delivery management, knowledge management and cash flow management. Most benefits from ebusiness solutions come from the electrifying of operational level processes, such as service delivery management and cash flow management.

Value added logistical support service Part 2. Outsourcing process of spare part logistics in metal industry

The aim of this research study was to find out guidelines for outsourcing of logistics processes. The study was outlined to spare parts and `business-to-business' (B2B) markets in metal industry. This study can be applied as a manual for outsourcing especially warehousing and transportation activities. The study also touches other important areas of spare part logistics like manufacturing, customer service, procurement, quality control, reverse and recycling logistics, logistics technologies and valueadded services. The method of study consisted of three areas. Firstly exchanging views with logistics experts in participating companies, and secondly compiling material based on author's practical experience in logistics business with several international and domestic logistics service providers and vendors. Thirdlythe study includes also references to literature material. Due to the fact thatthe outsourcing of logistics functions can be handled widely and from differentpoint of views, in this study it is concentrated mainly on giving general levelguidelines for defining logistics strategy, hints both for tendering process and implementation project, and not forgetting the aftercare of business partnership.

Development of fibre recovery process

The fiber recovery process is an essential part of the modern paper mill. It creates the basisfor mill's internal recirculation of the most important raw materials ¿ water and fiber. It is normally also a start point for further treatment of wastewater and if it works efficiently, it offers excellent basis to minimize effluents. This dissertation offers two different approaches to the subject. Firstly a novel save-all disc filter feeding system is developed and presented. This so-called precoat method is tested both in the laboratory and full-scale conditions. In laboratory scale it beats the traditional one clearly, when low freeness pulps are used as a sweetener stock. The full-scale application needs still some development work before it can be implemented to the paper mills. Secondly, the operationenvironment of save-all disc filter is studied mostly in laboratory conditions.The focus of this study is in cases, where low-freeness pulps are used as a sweetener stock of save-all filter. The effects of CSF-value, pressure drop, suspension consistency and retention chemicals to the quantity and quality of the filtrate was studied. Also the filtration resistance of the low freeness pulps was one studied.

The Value System of Consumer Board Packaging

Olemassa olevien teollisuuden rakenteiden ja arvoketjujen muutos on usein onnistuneiden liiketoimintainnovaatioiden takana. Yritysten tulisikin olla tietoisia rakenteista, jotka määrittelevät arvon jakaantumista niiden arvoketjuissa. Tämän työn tavoitteena oli tutkia ja arvioida kartongin pakkausketjujen rakenteita kartongintuottajalta aina kauppiaalle asti. Työn kuluessa yritysketjujen arviointia varten oli kehitettävä uudenlainen analysointityökalu. Työssä käsitellyt kartonkipakkausketjut olivat nestekartonkipakkaaminen, elintarvikepakkaaminen, lääkepakkaaminen sekä graafisten kartonkien ketju. Jokaista edellä mainituista ketjuista arvioitiin käyttämällä kehitettyä analysointityökalua. Työn merkittävin tulos on kehitetty työkalu, jolla pakkausketjuja sekä myös muita yritysketjuja on mahdollista analysoida. Kehitettyä työkalua käyttämällä oli mahdollista tehdä johtopäätöksiä vertikaalin integraation mahdollisuudesta sekä pakkausketjujen suotuisuudesta uusille bisnesmalleille. Sekä analysointityökalua että saatuja johtopäätöksiä voidaan käyttää hyväksi, kun kartongintuottaja suunnittelee tulevaisuuden toimenpiteitä.

Agent-augmented process automation system in a panel board factory

Kiristyvä kansainvälinen kilpailu pakottaa automaatiojärjestelmien valmistajat ottamaan käyttöön uusia menetelmiä, joiden avulla järjestelmien suorituskykyä ja joustavuutta saadaan parannettua. Agenttiteknologiaa on esitetty käytettäväksi olemassa olevien automaatiojärjestelmien kanssa vastaamaan automaatiolle asetettaviin uusiin haasteisiin. Agentit ovat itsenäisiä yhteisöllisiä toimijoita, jotka suorittavat niille ennalta määrättyjä tehtäviä. Ne tarjoavat yhtenäisen kehyksen kehittyneiden toimintojen toteutukselle. Agenttiteknologian avulla automaatiojärjestelmä saadaan toimimaan joustavasti ja vikasietoisesti. Tässä työssä selostetaan agenttiteknologian ajatuksia ja käsitteitä. Lisäksi selvitetään sen soveltuvuutta monimutkaisten ohjausjärjestelmien kehittämiseen ja etsitään käyttökohteita sen soveltamiselle levytehtaassa. Työssä käsitellään myös aatteita, jotka ovat johtaneet agenttiteknologian käyttöön automaatiojärjestelmissä, sekä selostetaan agenttiavusteisen esimerkkisovelluksen rakenne ja testitulokset. Tutkimuksen tuloksena löydettiin useita kohteita agenttiteknologian käytölle levytehtaassa. Esimerkkisovellus osoittaa sen sopivan hyvin kehittyneiden toimintojen toteutukseen automaatiojärjestelmissä.