Synthesis and characterization of electroactive and biodegradable ABA block copolymer of polylactide and aniline pentamer

A triblock copolymer PLA-b-AP-b-PLA (PAP) of polylactide (PLA) and aniline pentamer (AP) with the unique properties of being both electroactive and biodegradable is synthesized by coupling an electroactive carboxyl-capped AP with two biodegradable bihydroxyl-capped PLAs via a condensation reaction. Three different molecule weight PAP copolymers are prepared. The PAP copolymers exhibit excellent electroactivity similar to the AP and polyaniline, which may stimulate cell proliferation and differentiation. The electrical conductivity of the PAP2 copolymer film (similar to 5 x 10(-6) S/cm) is in the semiconducting region. Transmission electron microscopic results suggest that there is microphase separation of the two block segments in the copolymer, which might contribute to the observed conductivity. The biodegradation and biocompatibility experiments in vitro prove the copolymer is biodegradable and biocompatible. Moreover, these new block copolymer shows good solubility in common organic solvents, leading to the system with excellent processibility. These biodegradable PAP copolymers with electroactive function thus possess the properties that would be potentially used as scaffold materials for neuronal or cardiovascular tissue engineering.

SBS as template to synthesize 3D siliceous mesostructured cellular foams

A mesostructured cellular foam (MCF) with three-dimensional (313) disordered strutlike structure is prepared by using triblock copolymer (poly(styrene-b-butadiene-b-styrene), SBS, M-W = 140K) as template under strong acid conditions. It is the first report to use triblock copolymer with both hydrophobic head and tail groups instead of hydrophilic head and hydrophobic tail copolymers to synthesize siliceous mesostructured cellular foams. The resulted materials have high pore volume (0.92 cm(3)/g) and relatively narrow pore size distributions with a large pore size of 7.9 nm, which will allow for the fixation of large active complexes, reduce diffusional restriction of reactants and enable reactions involving bulky molecules to take place, especially.

Polylactide-based polyurethane and its shape-memory behavior

A series of polylactide polyurethanes (PLAUs) were synthesized from poly(L-lactide) diols, hexamethylene diisocyanate (HDI), and 1,4-butanediol (BDO). Their thermal and mechanical properties and shape-memory behavior were studied by infrared spectroscopy (IR), differential scanning calorimetry (DSC), wide angle X-ray diffraction (WAXID), tensile testing, and thermal mechanical analysis (TMA). The T(g)s of these polymers were in the range of 33-53 degrees C, and influenced by the Mn of the PLA diol and the ratio of the soft-segment to the hard-segment. These materials can restore their shapes almost completely after 150% elongation or twofold compression. By changing the M-n of the PLA diol and the ratio of the hard-to-soft-segment, their Ts and shape-recovery temperatures can be adjusted to the neighborhood of the body temperature. Therefore, these PLAUs are expected to find practical medical applications.

Shear modulus of two-dimensional foams: The effect of area dispersity and disorder

Cox, S.J. and Whittick, E.L. (2006) Shear modulus of two-dimensional foams: The effect of area dispersity and disorder. Euro. Phys. J. E 21:49-56 Sponsorship: EPSRC

The mixing of bubbles in two-dimensional bidisperse foams under extensional shear

Cox, S.J. (2006) The mixing of bubbles in two-dimensional bidisperse foams under extensional shear. Journal of Non-Newtonian Fluid Mechanics . 137:39-45.

Drainage induced convection rolls in foams

Hutzler, S., Cox, S.J., Janiaud, E. and Weaire, D. (2007) Drainage induced convection rolls in foams. Colloids and Surfaces A: Physicochemical and Engineering Aspects Volume 309, Issues 1-3, 1 November 2007, Pages 33-37 A Collection of Papers Presented at the 6th Eufoam Conference, Potsdam, Germany, 2-6 July, 2006 Sponsorship: European Space Agency (14914/02/NL/SH, 14308/00/NL/SG) (AO-99-031) CCN 002 MAP Project AO-99-075); Science Foundation Ireland (RFP 05/RFP/PHY0016); Royal Society; UWA Learned Societies.

A viscous froth model for dry foams in the Surface Evolver

Cox, S.J. (2005) A Viscous Froth Model for Dry Foams in the Surface Evolver. Coll. Surf. A 263:81-89. Sponsorship: Partial support from both the Ulysses France?Ireland Exchange Scheme and the European Space Agency, Contract 14308/00/NL/SH (AO-99-031) CCN 002 MAP Project AO-99-075.

The Couette shear of foams - a summary

Sponsorship: EPSRC, British Council Alliance programme

Report on the British Society of Rheology mid-winter meeting on The Rheology of Foams and Emulsions, Royal School of Mines, Imperial College, London 10th - 11th December 2007

S.J. Cox, S. Neethling and H. Wilson (2008) British Society of Rheology mid-winter meeting on The Rheology of Foams and Emulsions. Applied Rheology 18:93-95

On the structure of quasi-two-dimensional foams

S.J. Cox and E. Janiaud (2008) On the structure of quasi-two-dimensional foams. Phil. Mag. Letts. 88:693-701 Philosophical Magazine Letters Volume 88, Issue 9-10, 2008 Special Issue: Solid and Liquid Foams. In commemoration of Manuel Amaral Fortes The full text will be available 12 months after publication Sponsorship: We thank K. Brakke for his development and maintenance of the Surface Evolver code, I. Cantat, N. Denkov and F. Graner for their insightful comments on this work, and the participants in the Grenoble Foam Mechanics Workshop (2008) for their suggestions. EJ thanks D. Weaire and S. Hutzler for support, and ESA (MAP AO-99-108:C14914/02/NL/SH, MAP AO-99-075:C14308/00/NL/SH) for funding. SJC thanks the British Council Alliance programme, CNRS and EPSRC (EP/D048397/1, EP/D071127/1) for financial support.