RADAR Roadmap: The application of EPrints for the continued development of RADAR at The Glasgow School of Art

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

The Literary relations between La Fontaine and the "Astrée" of Honoré d'Urfé : a dissertation presented to the faculty of the department of philosophy of the university of Pennsylvania in partial fulfilment of the requirements for the degree of doctor of philosophy / by Walther P. Fischer

Collection : Publications of the University of Pennsylvania ; n° 6

ANALYSIS, MODIFICATION, AND EVALUATION OF THE COLD FLOW PROPERTIES OF VEGETABLE OILS AS BASE OIL FOR INDUSTRIAL LUBRICANTS

Poor cold flow properties of vegetable oils are a major problem preventing the usage of many abundantly available vegetable oils as base stocks for industrial lubricants. The major objective of this research is to improve the cold flow properties of vegetable oils by various techniques like additive addition and different chemical modification processes. Conventional procedure for determining pour point is ASTM D97 method. ASTM D97 method is time consuming and reproducibility of pour point temperatures is poor between laboratories. Differential Scanning Calorimetry (DSC) is a fast, accurate and reproducible method to analyze the thermal activities during cooling/heating of oil. In this work coconut oil has been chosen as representative vegetable oil for the analysis and improvement cold flow properties since it is abundantly available in the tropics and has a very high pour point of 24 °C. DSC is used for the analysis of unmodified and modified vegetable oil. The modified oils (with acceptable pour points) were then subjected to different tests for the valuation of important lubricant properties such as viscometric, tribological (friction and wear properties), oxidative and corrosion properties.A commercial polymethacrylate based PPD was added in different percentages and the pour points were determined in each case. Styrenated phenol(SP) was added in different concentration to coconut oil and each solution was subjected to ASTM D97 test and analysis by DSC. Refined coconut oil and other oils like castor oil, sunflower oil and keranja oil were mixed in different proportions and interesterification procedure was carried out. Interesterification of coconut oil with other vegetable oils was not found to be effective in lowering the pour point of coconut oil as the reduction attained was only to the extent of 2 to 3 °C.Chemical modification by acid catalysed condensation reaction with coconut oil castor oil mixture resulted in significant reduction of pour point (from 24 ºC to -3 ºC). Instead of using triacylglycerols, when their fatty acid derivatives (lauric acid- the major fatty acid content of coconut oil and oleic acid- the major fatty acid constituents of monoand poly- unsaturated vegetable oils like olive oil, sunflower oil etc.) were used for the synthesis , the pour point could be brought down to -42 ºC. FTIR and NMR spectroscopy confirmed the ester structure of the product which is fundamental to the biodegradability of vegetable oils. The tribological performance of the synthesised product with a suitable AW/EP additive was comparable to the commercial SAE20W30 oil. The viscometric properties (viscosity and viscosity index) were also (with out additives) comparable to commercial lubricants. The TGA experiment confirmed the better oxidative performance of the product compared to vegetable oils. The sample passed corrosion test as per ASTM D130 method.

Time and cost overruns of industrial projects in kerala

Poor project planning, implementation and control and the subsequent cost and time overruns are ubiquitous features that have been posing serious concern at all levels - state, national and international. It results in wastage of the nation's scarce resources and retards the socio-economic progress. Although several studies peripheral on project overruns have been made at the national level, no serious attempt has been made at the state level to identify the magnitude of overruns, their causes and impacts on industrial projects. The present study "Time and Cost Overruns of Industrial Projects in Kerala" is an earnest attempt to probe in depth the time and cost overruns and their impact on industrial projects. The study places emphasise on the identification of the real reasons behind the cost and time overruns. It also covers the present project management practices of industrial projects in Kerala.

Construction and modification of the autonomy of school mathematical knowledge in Portugal

Resumen basado en el de la publicaci??n

Valorisation of industrial wastes for the removal of metals and arsenic from aqueous effluents

En la presente tesis se han realizado estudios de eliminación de metales pesados y arsénico de aguas contaminadas mediante procesos de adsorción sobre materiales de bajo coste. Dichos materiales son, en todos los casos, subproductos de industrias agroalimentarias o metalúrgicas.La tesis consta de diferentes capítulos enmarcados en tres secciones: (i) Eliminación de cromo hexavalente y trivalente (ii) Eliminación de cationes divalentes de metales pesados en presencia de complejantes y en mezclas multimetálicas y (iii) Eliminación de arsénico utilizando un subproducto de la industria de cromados metálicos como adsorbente. Los resultados obtenidos ponen de manifiesto que ciertos residuos industriales pueden ser utilizados como adsorbentes en la detoxificación de efluentes contaminados con metales pesados. La tecnología propuesta representa una alternativa sostenible y de bajo coste frente a los tratamientos actuales más costosos y dependientes, en muchas ocasiones, de productos derivados del petróleo.

Environmental management reform for sustainable farming, fisheries and aquaculture: state of the art review

FOOD-CT-2007-036298: AquAgriS. Project co-funded by the European Commission within the Sixth Framework (2002-2006)

Factors Underlying the Formation of Industrial Clusters in Japan and Industrial Cluster Policy: A Quantitative Survey

The purpose of this report is to use information provided by a questionnaire survey to analyze the factors and processes underlying the formation of industrial clusters in Japan. The study, based on questionnaire surveys, forms part of an "Industrial Cluster Project". The Japanese government has implemented policies for industrial clusters so as to enable Japanese industries to maintain competitive power in global markets, and to aid the self-sufficient expansion of local industries. The government's project goes under the heading "Industry Agglomeration for the Recovery of Local Industries with respect to so-called "Industry Clusters." The authors aim to identify what expectations are held of government by the enterprises that make up industrial clusters. As part of our investigation, we used the results of a survey conducted by UNDP in 2004. Tsuji's study, published by the Osaka School of International Public Policy, surveyed 1198 small or medium sized manufacturing companies located in O ward, Tokyo and Higashi Osaka city, Osaka prefecture. The outcome of the present study, together with data from Tsuji's work on IT usage by SMEs in Japan, is meant to form the basis for policy design and implementation.

Social issues in sustainable supply chain networks: state of the art and further research directions

The study of supply networks sustainability is a field with a long path behind. Nonetheless, most studies to date are focused on the environmental sub dimension of sustainability, while the social perspective in supply chain networks research still shows a potential for pioneering contri butions. Moreover, from the development standpoint we have observed a paradigm shift advancing from a narrow concept of development, centered on purely economic dimensions, towards more refined issues such as inclusive business, shared value or poverty footprint, all of which are highly related to supply chain activities. In this paper we present a review of the current state of the art on social sustainability of supply chains and we identify the main existing trends in this field. After conducting this study, we can state that a new sphere of knowledge is emerging at the interface between sustainable supply chain networks and development research. The academic community is called to play an important dovetailing role in this scenario by advancing both conceptual and methodological contributions.

Lonnie Holley exploration and analysis of his artworks in two settings : the yard and the museum

The contemporary artist, Lonnie Holley, creates assemblage sculptures using found objects that he then places in his multi-layered yard art environment. With the rise in prestige of folk art, many art galleries and museums have displayed the works of Holley, removing them from the yard art environment and placing them in the gallery setting. This paper addresses how meaning changes when the context of Holley’s artworks changes.

Inventions and industry in the art of Howard Finster

This paper examines Finster’s collection of Inventions of Mankind and his paintings of American industrial icons such as Henry Ford and Eli Whitney. Additionally, this study explores Finster’s compulsive artistic productivity and his experimentation with mechanisms designed to create self-sustaining energy. By providing a comprehensive overview of Howard Finster’s fascination with inventions and industry, this paper serves to provide new insight and dimension into the often over-generalized interpretations of his extensive body of work

Discovering a history : the school of art at the University of Denver

Discovering a History: The School of Art at the University of Denver explores the early history of art education in Denver, and the significance of visual art education at the University of Denver within that history beginning in 1865, when the first classes in art were offered, and ending in 1929 when the University acquired the Chappell School of Art—an independent art school—and appointed Vance Kirkland as director. This paper also explores competing art institutions, which at times posed great hindrances to the University. Further, it illustrates how the artists who taught at the University of Denver School of Art, such as Ida De Steiguer, Preston Powers, Emma Richardson Cherry, and Henry Read, were amongst the great contributors to Denver’s burgeoning artistic culture.

Laws made and past by William Penn: Absolute Proprietary and Governour in Chief of the province of Pennsylvania and territories thereunto belonging, with the advice and consent of the freemen thereof in genrall assembly met at Newcastle...1700....and [as amended] at Philadelphia...1701

Contains one of the few original copies of Penn's laws as first passed and as revised and extended in the following year. During the interval between the two Assemblies, while Penn was absent in England, the first series of laws were found to be impracticable, and new amendments were made for which Penn had no choice but to agree to.