Macroinvertebrate abundance and proportion of trait categories in river biotopes across England and Wales

There is a long tradition of river monitoring using macroinvertebrate communities to assess environmental quality in Europe. A promising alternative is the use of species life-history traits. Both methods, however, have relied on the time-consuming identification of taxa. River biotopes, 1-100 m**2 'habitats' with associated species assemblages, have long been seen as a useful and meaningful way of linking the ecology of macroinvertebrates and river hydro-morphology and can be used to assess hydro-morphological degradation in rivers. Taxonomic differences, however, between different rivers had prevented a general test of this concept until now. The species trait approach may overcome this obstacle across broad geographical areas, using biotopes as the hydro-morphological units which have characteristic species trait assemblages. We collected macroinvertebrate data from 512 discrete patches, comprising 13 river biotopes, from seven rivers in England and Wales. The aim was to test whether river biotopes were better predictors of macroinvertebrate trait profiles than taxonomic composition (genera, families, orders) in rivers, independently of the phylogenetic effects and catchment scale characteristics (i.e. hydrology, geography and land cover). We also tested whether species richness and diversity were better related to biotopes than to rivers. River biotopes explained 40% of the variance in macroinvertebrate trait profiles across the rivers, largely independently of catchment characteristics. There was a strong phylogenetic signature, however. River biotopes were about 50% better at predicting macroinvertebrate trait profiles than taxonomic composition across rivers, no matter which taxonomic resolution was used. River biotopes were better than river identity at explaining the variability in taxonomic richness and diversity (40% and <=10%, respectively). Detailed trait-biotope associations agreed with independent a priori predictions relating trait categories to near river bed flows. Hence, species traits provided a much needed mechanistic understanding and predictive ability across a broad geographical area. We show that integration of the multiple biological trait approach with river biotopes at the interface between ecology and hydro-morphology provides a wealth of new information and potential applications for river science and management.

O Botafumeiro: parametric pumping in the Middle Age

The pendular motion of a giant censer (O Botafumeiro) that hangs in the transept of the cathedral of Santiago de Compostela, and is cyclically pumped by men who pull at the supporting rope, is analyzed. Maximum angular amplitude attainable, and number of cycles and time needed to attain it, are calculated; the results agree with observed values (~ 82°, ~ 17 cycles, ~ 80 seconds) to the few percent accuracy of both the analysis and the observations and parameter measurements. The energy gain in a pumping cycle is obtained for an arbitrary pumping procedure to two orders in the small fractional change of pendular length; the relevance of the ratio (characteristic radial acceleration during pumping)/g to the gain is discussed- Effects due to rope mass, air drag on both Censer and rope, and the fact that the Censer is not a point mass, are considered. If the pumping cycle is inverted once the maximum amplitude has been attained, the Censer could be swiftly brought to rest, avoiding the usual violent stop. Historically recorded accidents, rope shape, and the influence of relevant parameters on the motion are discussed.

The Indian law reports, containing cases determined by the High Court at Bombay, and by the Judicial Committee of the Privy Council on appeal from the court.

Editors: L.J. Robertson.

How to learn on shore the Rule of the road at sea,

Mode of access: Internet.

Minutes of the Supreme Executive Council of Pennsylvania, from its organization to the termination of the Revolution. [Mar. 4, 1777 - Dec. 20, 1790]

This set is indexed in the "General index to the Colonial records, in 16 volumes, and to the Pennsylvania archives, in 12 volumes ... by Samuel Hazard." Philadelphia, 1860.

Introduction : the role of quality, production and technological innovation in improving competitive performance

Quality, production and technological innovation management rank among the most important matters of concern to modern manufacturing organisations. They can provide companies with the decisive means of gaining a competitive advantage, especially within industries where there is an increasing similarity in product design and manufacturing processes. The papers in this special issue of International Journal of Technology Management have all been selected as examples of how aspects of quality, production and technological innovation can help to improve competitive performance. Most are based on presentations made at the UK Operations Management Association's Sixth International Conference held at Aston University at which the theme was 'Getting Ahead Through Technology and People'. At the conference itself over 80 papers were presented by authors from 15 countries around the world. Among the many topics addressed within the conference theme, technological innovation, quality and production management emerged as attracting the greatest concern and interest of delegates, particularly those from industry. For any new initiative to be implemented successfully, it should be led from the top of the organization. Achieving the desired level of commitment from top management can, however, be a difficulty. In the first paper of this issue, Mackness investigates this question by explaining how systems thinking can help. In the systems approach, properties such as 'emergence', 'hierarchy', 'commnication' and 'control' are used to assist top managers in preparing for change. Mackness's paper is then complemented by Iijima and Hasegawa's contribution in which they investigate the development of Quality Information Management (QIM) in Japan. They present the idea of a Design Review and demonstrate how it can be used to trace and reduce quality-related losses. The next paper on the subject of quality is by Whittle and colleagues. It relates to total quality and the process of culture change within organisations. Using the findings of investigations carried out in a number of case study companies, they describe four generic models which have been identified as characterising methods of implementing total quality within existing organisation cultures. Boaden and Dale's paper also relates to the management of quality, but looks specifically at the construction industry where it has been found there is still some confusion over the role of Quality Assurance (QA) and Total Quality Management (TQM). They describe the results of a questionnaire survey of forty companies in the industry and compare them to similar work carried out in other industries. Szakonyi's contribution then completes this group of papers which all relate specifically to the question of quality. His concern is with the two ways in which R&D or engineering managers can work on improving quality. The first is by improving it in the laboratory, while the second is by working with other functions to improve quality in the company. The next group of papers in this issue all address aspects of production management. Umeda's paper proposes a new manufacturing-oriented simulation package for production management which provides important information for both design and operation of manufacturing systems. A simulation for production strategy in a Computer Integrated Manufacturing (CIM) environment is also discussed. This paper is then followed by a contribution by Tanaka and colleagues in which they consider loading schedules for manufacturing orders in a Material Requirements Planning (MRP) environment. They compare mathematical programming with a knowledge-based approach, and comment on their relative effectiveness for different practical situations. Engstrom and Medbo's paper then looks at a particular aspect of production system design, namely the question of devising group working arrangements for assembly with new product structures. Using the case of a Swedish vehicle assembly plant where long cycle assembly work has been adopted, they advocate the use of a generally applicable product structure which can be adapted to suit individual local conditions. In the last paper of this particular group, Tay considers how automation has affected the production efficiency in Singapore. Using data from ten major industries he identifies several factors which are positively correlated with efficiency, with capital intensity being of greatest interest to policy makers. The two following papers examine the case of electronic data interchange (EDI) as a means of improving the efficiency and quality of trading relationships. Banerjee and Banerjee consider a particular approach to material provisioning for production systems using orderless inventory replenishment. Using the example of a single supplier and multiple buyers they develop an analytical model which is applicable for the exchange of information between trading partners using EDI. They conclude that EDI-based inventory control can be attractive from economic as well as other standpoints and that the approach is consistent with and can be instrumental in moving towards just-in-time (JIT) inventory management. Slacker's complementary viewpoint on EDI is from the perspective of the quality relation-ship between the customer and supplier. Based on the experience of Lucas, a supplier within the automotive industry, he concludes that both banks and trading companies must take responsibility for the development of payment mechanisms which satisfy the requirements of quality trading. The three final papers of this issue relate to technological innovation and are all country based. Berman and Khalil report on a survey of US technological effectiveness in the global economy. The importance of education is supported in their conclusions, although it remains unclear to what extent the US government can play a wider role in promoting technological innovation and new industries. The role of technology in national development is taken up by Martinsons and Valdemars who examine the case of the former Soviet Union. The failure to successfully infuse technology into Soviet enterprises is seen as a factor in that country's demise, and it is anticipated that the newly liberalised economies will be able to encourage greater technological creativity. This point is then taken up in Perminov's concluding paper which looks in detail at Russia. Here a similar analysis is made of the concluding paper which looks in detail at Russia. Here a similar analysis is made of the Soviet Union's technological decline, but a development strategy is also presented within the context of the change from a centralised to a free market economy. The papers included in this special issue of the International Journal of Technology Management each represent a unique and particular contribution to their own specific area of concern. Together, however, they also argue or demonstrate the general improvements in competitive performance that can be achieved through the application of modern principles and practice to the management of quality, production and technological innovation.

Mixed Fractional Integration Operators in Mixed Weighted Hölder Spaces

MSC 2010: 26A33

Chain routing:a new routing framework for the Internet based on complete orders

A new framework to perform routing at the autonomous system (AS) level is proposed here. This mechanism, called chain routing framework (CRF), uses complete orders as its main topological unit. Since complete orders are acyclic digraphs that possess a known topology, it is possible to use these acyclic structures to route consistently packets between a group of ASs. The adoption of complete orders also allows easy identification and avoidance of persistent route oscillations, eliminates the possibility of developing transient loops in paths and provides a structure that facilitates the implementation of traffic engineering. Moreover, by combining CRF with other mechanisms that implement complete orders in time, the authors propose that it is possible to design a new routing protocol, which can be more reliable and stable than the border gateway protocol. © 2011 The Institution of Engineering and Technology.

An order batching and processing heuristic to address aisle congestion in a manual order picking warehouse with order due dates

A heuristic for batching orders in a manual order-picking warehouse has been developed. It prioritizes orders based on due time to prevent mixing of orders of different priority levels. The order density of aisles criterion is used to form batches. It also determines the number of pickers required and assigns batches to pickers such that there is a uniform workload per unit of time. The effectiveness of the heuristic was studied by observing computational time and aisle congestion for various numbers of total orders and number of orders that form a batch. An initial heuristic performed well for small number of orders, but for larger number of orders, a partitioning technique is computationally more efficient, needing only minutes to solve for thousands of orders, while preserving 90% of the batch quality obtained with the original heuristic. Comparative studies between the heuristic and other published heuristics are needed. ^

The order selection and lot sizing problem in the make-to-order environment

This research is motivated by the need for considering lot sizing while accepting customer orders in a make-to-order (MTO) environment, in which each customer order must be delivered by its due date. Job shop is the typical operation model used in an MTO operation, where the production planner must make three concurrent decisions; they are order selection, lot size, and job schedule. These decisions are usually treated separately in the literature and are mostly led to heuristic solutions. The first phase of the study is focused on a formal definition of the problem. Mathematical programming techniques are applied to modeling this problem in terms of its objective, decision variables, and constraints. A commercial solver, CPLEX is applied to solve the resulting mixed-integer linear programming model with small instances to validate the mathematical formulation. The computational result shows it is not practical for solving problems of industrial size, using a commercial solver. The second phase of this study is focused on development of an effective solution approach to this problem of large scale. The proposed solution approach is an iterative process involving three sequential decision steps of order selection, lot sizing, and lot scheduling. A range of simple sequencing rules are identified for each of the three subproblems. Using computer simulation as the tool, an experiment is designed to evaluate their performance against a set of system parameters. For order selection, the proposed weighted most profit rule performs the best. The shifting bottleneck and the earliest operation finish time both are the best scheduling rules. For lot sizing, the proposed minimum cost increase heuristic, based on the Dixon-Silver method performs the best, when the demand-to-capacity ratio at the bottleneck machine is high. The proposed minimum cost heuristic, based on the Wagner-Whitin algorithm is the best lot-sizing heuristic for shops of a low demand-to-capacity ratio. The proposed heuristic is applied to an industrial case to further evaluate its performance. The result shows it can improve an average of total profit by 16.62%. This research contributes to the production planning research community with a complete mathematical definition of the problem and an effective solution approach to solving the problem of industry scale.

The Shrine of ʿAbd al-Qādir al-Jīlānī in Baghdad & the Shrine of ʿAbd al-ʿAzīz al-Jīlānī in ʿAqra: Mapping the multiple orientations of two Qādirī Sufi shrines in Iraq

This thesis charts the stakeholder communities, physical environment and daily life of two little studied Qādiriyya Sufi shrines associated with Shaikh ʿAbd al-Qādir al-Jīlānī (1077 – 1165 AD), a 12th century Ḥanbalī Muslim theologian and the posthumous founder of one of the oldest Sufi orders in Islam. The first shrine is based in Baghdad and houses his burial chamber; and the second shrine, on the outskirts of the city of ‘Aqra in the Kurdish region of northern Iraq, is that of his son Shaikh ʿAbd al-ʿAzīz (died 1206 AD). The latter was also known for lecturing in Ḥanbalī theology in the region, and venerated for this as well as his association with Shaikh ʿAbd al-Qādir. Driven by the research question “What shapes the identity orientations of these two Qādiriyya Sufi shrines in modern times?” the findings presented here are the result of field research carried out between November 2009 and February 2014. This field research revealed a complex context in which the two shrines existed and interacted, influenced by both Sufi and non-Sufi stakeholders who identified with and accessed these shrines to satisfy a variety of spiritual and practical needs, which in turn influenced the way each considered and viewed the two shrines from a number of orientations. These overlapping orientations include the Qādirī Sufi entity and the resting place of its patron saint; the orthodox Sunnī mosque with its muftī-imams, who are employed by the Iraqi government; the local Shīʿa community’s neighbourhood saint’s shrine and its destination for spiritual and practical aid; and the local provider of welfare to the poor of the city (soup kitchen, funeral parlour and electricity-generation amongst other services). The research findings also revealed a continuously changing and adapting Qādirī Sufi scene not immune from the national and regional socio-religio-political environments in which the two shrines exist: a non-Sufi national political class vying to influence and manipulate these shrines for their own purposes; and powerful national sectarian factions jostling to do the same. The mixture of stakeholders using and associating with the two shrines were found to be influential shapers of these entities, both physically and spiritually. Through encountering and interacting with each other, most stakeholders contributed to maintaining and rejuvenating the two shrines, but some also sought to adapt and change them driven by their particular orientation’s perspective.

End-of-life care in a cardiology department: have we improved?

nd-of-life care is not usually a priority in cardiology departments. We sought to evaluate the changes in end-of-life care after the introduction of a do-not-resuscitate (DNR) order protocol. Retrospective analysis of all deaths in a cardiology department in two periods, before and after the introduction of the protocol. Comparison of demographic characteristics, use of DNR orders, and end-of-life care issues between both periods, according to the presence in the second period of the new DNR sheet (Group A), a conventional DNR order (Group B) or the absence of any DNR order (Group C). The number of deaths was similar in both periods (n = 198 vs. n = 197). The rate of patients dying with a DNR order increased significantly (57.1% vs. 68.5%; P = 0.02). Only 4% of patients in both periods were aware of the decision taken about cardiopulmonary resuscitation. Patients in Group A received the DNR order one day earlier, and 24.5% received it within the first 24 h of admission (vs. 2.6% in the first period; P < 0.001). All patients in Group A with an implantable cardioverter defibrillator (ICD) had shock therapies deactivated (vs. 25.0% in the first period; P = 0.02). The introduction of a DNR order protocol may improve end-of-life care in cardiac patients by increasing the use and shortening the time of registration of DNR orders. It may also contribute to increase ICD deactivation in patients with these orders in place. However, the introduction of the sheet in late stages of the disease failed to improve patient participation.

Test architecture for prototyping automated dynamic airspace control

The automation of various aspects of air traffic management has many wide-reaching benefits including: reducing the workload for Air Traffic Controllers; increasing the flexibility of operations (both civil and military) within the airspace system through facilitating automated dynamic changes to en-route flight plans; ensuring safe aircraft separation for a complex mix of airspace users within a highly complex and dynamic airspace management system architecture. These benefits accumulate to increase the efficiency and flexibility of airspace use(1). Such functions are critical for the anticipated increase in volume of manned and unmanned aircraft traffic. One significant challenge facing the advancement of airspace automation lies in convincing air traffic regulatory authorities that the level of safety achievable through the use of automation concepts is comparable to, or exceeds, the accepted safety performance of the current system.

Numerical simulation of a fractional mathematical model for epidermal wound healing

A number of mathematical models investigating certain aspects of the complicated process of wound healing are reported in the literature in recent years. However, effective numerical methods and supporting error analysis for the fractional equations which describe the process of wound healing are still limited. In this paper, we consider numerical simulation of fractional model based on the coupled advection-diffusion equations for cell and chemical concentration in a polar coordinate system. The space fractional derivatives are defined in the Left and Right Riemann-Liouville sense. Fractional orders in advection and diffusion terms belong to the intervals (0; 1) or (1; 2], respectively. Some numerical techniques will be used. Firstly, the coupled advection-diffusion equations are decoupled to a single space fractional advection-diffusion equation in a polar coordinate system. Secondly, we propose a new implicit difference method for simulating this equation by using the equivalent of the Riemann-Liouville and Gr¨unwald-Letnikov fractional derivative definitions. Thirdly, its stability and convergence are discussed, respectively. Finally, some numerical results are given to demonstrate the theoretical analysis.

Finding our way to the future : directions for a city of opportunity

This Australian case study of futures methodologies in local government explores the development and implementation of the Logan 2026 City Directions project. As an innovative approach to strategic planning, and forming the city visioning umbrella for the Strategic Planning and Performance Management Framework of Council, Logan 2026 City Directions has facilitated greater engagement with the community and represents an opportunity for Council to explore and build on the organisation's foresight capacity and to enhance internal communications within the organisation. One significant by-product has been ongoing dialogue and actions of the workshop groups in Council seeking to address such issues as climate change.