Líquidos iônicos aplicados na síntese e estabilização de nanopartículas de Pt(0) e Pd/Pt(0), caracterização e estudos em reações de hidrogenação catalítica

A presente tese descreve a síntese e estabilização de nanopartículas de Pt (0) nos líquidos iônicos BMI.PF6, BMI.BF4 e BMI.CF3SO3, a síntese de nanopartículas bimetálicas de Pd/Pt (0) em líquido iônico BMI.PF6, a caracterização destes materiais por TEM, HRTEM, XRD, SAXS e XPS, e principalmente o estudo da aplicação destes materiais como catalisadores em reações de hidrogenação. A decomposição do precursor catalítico Pt2(dba)3 e redução do precursor PtO2 dissolvidos nos líquidos iônicos BMI.PF6, BMI.BF4 e BMI.CF3SO3 utilizando hidrogênio molecular como agente redutor resultou em nanopartículas de Pt (0) com um diâmetro médio entre 2-3 nm. Essas partículas, devidamente caracterizadas, foram utilizadas como catalisadores na hidrogenação de compostos olefínicos e aromáticos. Estudos cinéticos e mecanísticos de formação das nanopartículas metálicas, utilizando a hidrogenação de cicloexeno como sonda química, foram aplicados para avaliar e confirmar que as espécies ativas presentes nas reações de hidrogenação eram compostas de Pt (0). Os resultados obtidos foram complementados por TEM. As caracterizações das nanopartículas de Pt (0) (TEM, SAXS e XPS), os estudos cinéticos de formação destas, assim como, os dados de hidrogenação catalítica; evidenciaram que os líquidos iônicos utilizados são um excelente agente estabilizante para a síntese de nanopartículas de Pt (0) e Pd/Pt (0), bem como um meio ideal para reações de hidrogenação catalítica.

Análise mercadológica do sistema turístico da cidade de Ouro Preto-MG

O trabalho apresenta inicialmente considerações gerais sobre o turismo e o turismo no Brasil; posiciona conceitualmente o sistema de Marketing para o turismo, e apresenta sob um ponto de vista histórico o sistema específico a ser analisado. Posteriormente é estudada a oferta turística de Ouro Preto tomando-se como base analítica seus elementos formadores, e a demanda turísticos do local é analisada através de uma pesquisa mercadológica levada a efeito em fontes primárias. Os fundamentos conceituais do marketing turístico são apresentados, assim como suas particularidades e variáveis de decisão. No Último capítulo são elaboradas proposições mercadológicas para o turismo em Ouro Preto.

A formação de agenda de políticas públicas de turismo em âmbito local: os casos de Ouro Preto (MG) e Paraty (RJ)

Esta Tese teve como objetivo geral compreender como se dá a formação de agenda das políticas públicas de turismo em âmbito local, bem como identificar quais são os diferentes atores que influenciam esse processo. Tem como marco teórico a literatura sobre a análise de políticas públicas, especialmente no que se refere ao processo de formação de agenda. Para compreender o objeto da política analisada, também se apresenta como referência para este estudo a literatura sobre turismo e políticas públicas de turismo. A fim de conhecer um caso prático (reconhecidamente importante) sobre como se dá gestão pública local do turismo, analisou-se o Modelo Turístico de Barcelona, do qual foi possível extrair proposições que serviram de referência para a análise de duas cidades brasileiras, Ouro Preto (MG) e Paraty (RJ). A coleta de dados foi realizada in loco e envolveu tanto entrevistas semiestruturadas com importantes atores públicos e privados ligados à atividade turística em cada um dos municípios quanto a análise documental. Ademais, foram utilizados dados secundários, que permitiram complementar os dados primários. As estratégias utilizadas para a interpretação dos dados foram a análise within-case (cada caso em profundidade) e a análise cross-case (entre casos). Para a análise dos dados, utilizou-se o método de análise de conteúdo. Os resultados do estudo indicaram os seguintes fatores como elementos que influenciam a forma como o turismo é considerado pelos governos locais: o grau de dependência da cidade em relação ao turismo, o estágio de desenvolvimento do turismo em cada cidade e a rede de atores que participam da política; a prioridade dada ao tema pelo governo local; e o contexto político. De forma geral foram identificadas três perspectivas sobre como a temática turismo ascende à agenda dos governos locais: o turismo como oportunidade; o turismo como solução para problemas diversos de outras áreas; e o turismo como problema (social e setorial). Em ambos os casos analisados, constatou-se que a rede de atores que participam da política de turismo local é pouco articulada e a interação entre eles (que se dá principalmente por meio do Conselho Municipal de Turismo – caso de Ouro Preto, ou da formatação desse e de outros arranjos - caso de Paraty) não consegue ainda influenciar as políticas públicas. Contudo, assim como foi evidenciado em Paraty, a atuação isolada de algum ator (nesse caso, da iniciativa privada), tem conseguido fazer com que alguns temas sejam considerados como objeto de políticas públicas. Apesar de não haver uma relação clara de causa – efeito, o estudo apresenta evidências de que a atuação dos governos somente em alguns aspectos do turismo, beneficiando a interesses particulares, e a inação em outros, que afetam, sobretudo os interesses dos cidadãos, pode impulsionar um modelo de desenvolvimento turístico desigual, onde os benefícios são concentrados e os custos dispersos.

Ouro Verde (parte 1 e 2)

O Fórum de Investidores em Negócios Sustentáveis edição 2006, foi realizado em 14 de dezembro de 2006, em São Paulo (SP) no Salão Nobre da FGV-EAESP

Separador de arraste do tipo ás de ouro

Curso de Tecnologia Sucroalcooleira. Disciplina de Tecnologia de Produção de Açúcar. Ilustração. Dimensão: 1100x626. Tamanho: 72Kb.

O ouro branco abre caminho: o algodão e a modernização do espaço urbano da Cidade da Parahyba (1850-1924)

The present research deals with the modernization process of the Cidade da Parahyba2, between 1850 and 1924, and its relation with the cotton economy, which represented the main source of wealth accumulation for both the private and the public sectors throughout the First Republic. This study on urban history was developed by focusing on the understanding of the city s spatial formation, and despite its emphasis on the economic aspects involved, other factors that also contribute to the development of the social life were not put aside. The modernization process of the Cidade da Parahyba was also analyzed during the period established for the study according to a chronological and thematic approach that established comparisons with the financial situation of the State, whenever this was necessary, with special attention to the contribution of the cotton economy to the State´s revenues. It was possible to detect a lack of financial help and loans from the federal and municipal administrations for finishing several public works already underway in the capital, since the federal funds allocated to the State of Parahyba do Norte were rather employed in emergency works against droughts and in agricultural development. One can then conclude that the financial resources required for the urban interventions were withdrawn from the State s treasury itself, resources that were collected mainly from activities such as cotton exportation and cotton trading. Another factor shows the interdependence between the urban remodeling and the cotton economy: during the years marked by great droughts or by hard plagues on the cotton plantations, cotton production decreased, as well as the State s finances. The first measures taken by the State s administrators were to halt all projects of urban remodeling in progress in the Cidade da Parahyba, which was, clearly, the most privileged city by the State s presidents during the period analyzed. 2 The city of João Pessoa was named Cidade da Parahyba, a designation that remained until September 1930, when it received its present-day name in order to pay homage to the president of the State, João Pessoa Cavalcanti de Albuquerque, murdered in the city of Recife in August of that same year. At that time, the State of Paraíba was known as Parahyba do Norte. Since this work is limited to a period of time comprised within the First Republic, the names employed respect the terms used in those days

Obtenção e caracterização de nanopartículas de argilominerais

Natural nanoclays are of great interest particularly for the production of polymer-based nanocomposites. In this work, kaolinite clays from two natural deposits in the State of the Rio Grande do Norte and Paraiba were purified with thermal treatment and chemical treatments, and characterized. Front to the gotten data, had been proposals methodologies for elimination or reduction of coarse particle texts, oxide of iron and organic substance. These methodologies had consisted of the combination of operations with thermal treatments, carried through in electric oven, and acid chemical attacks with and hydrogen peroxide. The Analyzers Thermogravimetric was used to examine the thermal stability of the nanoclays. The analysis indicated weight losses at temperatures under 110 ºC and over the temperature range of 350 to 550 ºC. Based on the thermal analysis data, the samples were submitted to a thermal treatment at 500 °C, for 8 h, to remove organic components. The X-ray diffraction patterns indicated that thermal treatment under 500 °C affect the basic structure of kaolinite. The BET surface area measurements ranged from 32 to 38 m2/g for clay samples with thermal treatment and from 36 to 53 m2/g for chemically treated samples. Thus, although the thermal treatment increased the surface area, through the removal of organic components, the effect was not significant and chemical treatment is more efficient, not affect the basic structure of kaolinite, to improve particle dispersion. SEM analysis confirms that the clay is agglomerated forming micron-size particles

Obtenção de nanopartículas de hexaferrita de bário pelo método pechini

In this study barium hexaferrite was (general formulae BaFe12O19) was synthesized by the Pechini method under different conditions of heat treatment. Precursors like barium carbonate and iron nitrate were used. These magnetic ceramic, with magnetoplumbite type structure, are widely used as permanent magnet because of its excellent magnetic properties, such as: high Curie temperature, good magnetic anisotropy, high coercivity and corrosion resistance. The samples were characterized by thermal analysis (DTA and TG), X- ray Diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Scanning Electron Microscopy (SEM) end Vibrating sample Magnetometer (VSM). The results confirm the expected phase, which was reinforced according to our analysis. A single phase powder at relatively high temperatures with particle sizes around 100 nm was obtained. The characteristic magnetic behavior one of the phases has been noted (probably superparamagnetic material), while another phase was identified as a ferrimagnetic material. The ferrimagnetic phase showed vortex configuration with two central and slightly inclined plateaus. In general, increase of heat treatment temperature and time, directly influenced the technological properties of the samples

Avaliação espectrofotométrica do manchamento de resinas odontológicas contendo nanopartículas

Composite resins have been subjected to structural modifications aiming at improved optical and mechanical properties. The present study consisted in an in vitro evaluation of the staining behavior of two nanohybrid resins (NH1 and NH2), a nanoparticulated resin (NP) and a microhybrid resin (MH). Samples of these materials were prepared and immersed in commonly ingested drinks, i.e., coffee, red wine and acai berry for periods of time varying from 1 to 60 days. Cylindrical samples of each resin were shaped using a metallic die and polymerized during 30 s both on the bottom and top of its disk. All samples were polished and immersed in the staining solutions. After 24 hours, three samples of each resin immersed in each solution were removed and placed in a spectrofotome ter for analysis. To that end, the samples were previously diluted in HCl at 50%. Tukey tests were carried out in the statistical analysis of the results. The results revealed that there was a clear difference in the staining behavior of each material. The nanoparticulated resin did not show better color stability compared to the microhybrid resin. Moreover, all resins stained with time. The degree of staining decreased in the sequence nanoparticulated, microhybrid, nanohybrid MH2 and MH1. Wine was the most aggressive drink followed by coffee and acai berry. SEM and image analysis revealed significant porosity on the surface of MH resin and relatively large pores on a NP sample. The NH2 resin was characterized by homogeneous dispersion of particles and limited porosity. Finally, the NH1 resin depicted the lowest porosity level. The results revealed that staining is likely related to the concentration of inorganic pa rticles and surface porosity

Adição de nanopartículas de Ti em matriz de Fe através da deposição por magnetron sputtering

Microalloyed steels constitute a specific class of steel with low amount of carbon and microalloying elements such as Vanadium (V), Niobium (Nb) and Titanium (Ti). The development and application of microalloyed steels and steels in general are limited to the handling of powders with particles of submicron or nanometer dimensions. Therefore, this work presents an alternative in order to construction of microalloyed steels utilizing the deposition by magnetron sputtering technique as a microalloying element addiction in which Ti nanoparticles are dispersed in an iron matrix. The advantage of that technique in relation to the conventional metallurgical processes is the possibility of uniformly disperse the microalloying elements in the iron matrix. It was carried out deposition of Ti onto Fe powder in high CH4, H2, Ar plasma atmosphere, with two deposition times. After the deposition, the iron powder with nanoparticles of Ti dispersed distributed, were compacted and sintered at 1120 ° C in resistive furnace. Characterization techniques utilized in the samples of powder before and after deposition of Ti were Granulometry, Scanning Electron Microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX) and X-ray diffraction (DRX). In the case of sintered samples, it was carried out characterization by SEM and Vickers Microhardness assays. The results show which the deposition technique by magnetron sputtering is practicable in the dispersion of particles in iron matrix. The EDX microanalysis detected higher percentages of Ti when the deposition were carried out with the inert gas and when the deposition process was carried out with reactive gas. The presence of titanium in iron matrix was also evidenced by the results of X-ray diffraction peaks that showed shifts in the network matrix. Given these results it can be said that the technique of magnetron sputtering deposition is feasible in the dispersion of nanoparticles of iron matrix in Ti.

Síntese de nanopartículas de magnetita via decomposição térmica em meio não-aquoso

This work aims at obtaining nanoparticles of iron oxide, the magnetite one (Fe3O4), via synthesis by thermal decomposition through polyol. Thus, two routes were evaluated: a simple decomposition route assisted by reflux and a hydrothermal route both without synthetic air atmosphere using a synthesis temperature of 260ºC. In this work observed the influence of the observe of surfactants which are generally applied in the synthesis of iron oxide nanoparticles decreasing cluster areas. Further, was observed pure magnetite phase without secondary phases generally found in the iron oxide synthesis, a better control of crystallite size, morphology, crystal structure and magnetic behavior. Finally, the introduction of hydroxyl groups on the nanoparticles surface was analyzed besides its employment in the polymer production with OH radicals. The obtained materials were characterized by XRD, DLS, VSM, TEM, TG and DSC analyses. The results for the magnetite obtainment with a particle size greater than 5 nm and smaller than 11 nm, well defined morphology and good magnetic properties with superparamagnetic behavior. The reflux synthesis was more efficient in the deposition of the hydroxyl groups on the nanoparticles surface

Desenvolvimento de filtros cerâmicos impregnados com nanopartículas de prata para desinfecção de água potável

Brazil has vast amounts of hydric resources, whose quality has been deteriorating due to pollutant dumping. Household waste disposal is one of the main sources of water pollution, stimulating bacteria proliferation and introducing microorganisms, including those from fecal matter. Conventional water disinfection methods are a solution, but on the downside, they lead to the formation byproducts hazardous to human health. In this study, aiming to develop bactericidal filters for the disinfection of drinking water; silver nanoparticles were deposited on alumina foams through three routes: sputtering DC, dip coating and in situ chemical reduction of silver nitrate. The depositions were characterized through X-ray diffraction, scanning electron microscopy and EDS element mapping. The influence of the depositions on permeability and mechanical properties of the ceramic foams was assessed and, in sequence, a preliminary antibacterial efficiency analysis was carried out. Characterization results indicate that the chemical reduction routes were efficient in depositing homogeneously distributed silver particles and that the concentration of the metallic precursor salt affects size and morphology of the particles. The antibacterial efficiency analysis indicates that the chemical reduction filters have potential for water disinfection

Nanopartículas de alginato como sistema de liberação para o herbicida clomazone

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)