Information transfer between large and small two-dimensional polyacrylamide gel electrophoresis.

To determine the feasibility of data transfer, an interlaboratory comparison was conducted on colon carcinoma cell line (DLD-1) proteins resolved by two-dimensional polyacrylamide gel electrophoresis either on small (6 x 7 cm) or large (16x18 cm) gels. The gels were silver-stained and scanned by laser densitometry, and the image obtained was analyzed using Melanie software. The number of spots detected was 1337+/-161 vs. 2382+/-176 for small vs. large format gels, respectively. After gel calibration using landmarks determined using pl and Mr markers, large- and small-format gels were matched and 712+/-36 proteins were found on both types of gels. Having performed accurate gel matching it was possible to acquire additional information after accessing a 2-D PAGE reference database (http://www.expasy.ch/ cgibin/map2/def?DLD1_HUMAN). Thus, the difference in gel size is not an obstacle for data transfer. This will facilitate exchanges between laboratories or consultation concerning existing databases.

Implications, large and small, from chemical education research for the teaching of chemistry

Research studies in chemical education pose a communication problem for chemists. Unlike the findings from other specializations in chemistry the findings in chemical education tend to be reported in education journals that are not readily accessible to most chemists or chemistry teachers. This lecture is an attempt to remedy this gap in communication. Research studies fall into three broad categories. (i) issues related to the content of chemistry itself, that is, What content to teach? And What meaning of each topic is to be conveyed? (ii) issues related to how chemical content is taught, such as, the role of lectures, practical work, particular pedagogies, etc. and (iii) issues related to its learning, that is, learning of concepts, conceptual change, motivation, etc. Findings in each of these categories of research over the last twenty years have drawn attention to opportunities for improving the quality of chemical education in each of the levels of formal education where chemistry is taught. Sometimes the research findings seem small since they, in fact, merely diagnose the actual problem in teaching and learning. At other times, the research findings are large because they provide a solution to these problems. What remains to be done is to disseminate the findings so that appropriate teaching occurs more widely, with its consequent gains in the quality of learning. Research findings, of these small and large types will be used to illustrate the potential of research to make the practice of chemical education more effective.

Gender diversity and innovation in manufacturing and service firms

Traditionally, researchers have considered the innovation process as being gender neutral. However, recently some studies have begun to take gender diversity into account as a determinant of firms’ innovation. This paper aims to analyse how the effect of gender diversity on innovation output at firm level is sensitive to team size. Using the Spanish PITEC (Panel de Innovación Tecnológica) from 2007 to 2012 for innovative manufacturing and service firms, we estimate a multivariate probit model to analyse how gender diversity both in R&D teams and in the total workforce affect product, process, marketing and organizational innovations. Our results show that gender-diverse teams increase the probability of innovating, and this capacity is positively related team size. Gender diversity, in both the R&D department and the total workforce, has a larger positive impact on the probability of carrying out product and organizational innovations in larger teams than it does in smaller teams. This effect is less clear-cut in the case of marketing and process innovation, where the impact is only significant for micro and small firms. Finally, size effects are of greater importance when we distinguish between the manufacturing and service sectors. JEL Code: O30, O31, J16

Micro- and nanostructuring of poly(ethylene-2,6-naphthalate) surfaces, for biomedical applications, using polymer replication techniques

Here we investigate the formation of superficial micro- and nanostructures in poly(ethylene-2,6-naphthalate) (PEN), with a view to their use in biomedical device applications, and compare its performance with a polymer commonly used for the fabrication of these devices, poly(methyl methacrylate) (PMMA). The PEN is found to replicate both micro- and nanostructures in its surface, albeit requiring more forceful replication conditions than PMMA, producing a slight increase in surface hydrophilicity. This ability to form micro/nanostructures, allied to biocompatibility and good optical transparency, suggests that PEN could be a useful material for production of, or for incorporation into, transparent devices for biomedical applications. Such devices will be able to be autoclaved, due to the polymer's high temperature stability, and will be useful for applications where forceful experimental conditions are required, due to a superior chemical resistance over PMMA.

Biogeochemistry in acid sulphate soil landscapes and small urban centres in Western Finland

The overall purpose of this thesis was to increase the knowledge on the biogeochemistry of rural acid sulphate (AS) soil environments and urban forest ecosystems near small towns in Western Finland. In addition, the potential causal relationship between the distribution of AS soils and geographical occurence of multiple sclerosis (MS) disease was assessed based on a review of existing literature and data. Acid sulphate soils, which occupy an area of approximately 17–24 million hectare worldwide, are regarded as the nastiest soils in the world. Independent of the geographical locality of these soils, they pose a great threat to their surrounding environment if disturbed. The abundant metal-rich acid drainage from Finnish AS soils, which is a result of sulphide oxidation due to artificial farmland drainage, has significant but spatially and temporally variable ecotoxicological impacts on biodiversity and community structure of fish, benthic invertebrates and macrophytes. This has resulted in mass fish kills and even eradication of sensitive fish species in affected waters. Moreover, previous investigations demonstrated significantly enriched concentrations of Co, Ni, Mn and Al, metals which are abundantly mobilised in AS soils, in agricultural crops (timothy grass and oats) and approximately 50 times higher concentrations of Al in cow milk originating from AS soils in Western Finland. Nevertheless, the results presented here demonstrate, in general, relatively moderate metal concentrations in oats and cabbage grown on AS soils in Western Finland, although some of the studied fields showed anomalous values of metals (e.g. Co and Ni) in both the soil and target plants (especially oats), similar to that of the previous investigations. The results indicated that the concentrations of Co, Ni, Mn and Zn in oats and Co and Zn in cabbage were governed by soil geochemistry as these metals were correlated with corresponding concentrations extracted from the soil by NH4Ac-EDTA and NH4Ac, respectively. The concentrations of Cu and Fe in oats and cabbage were uncorrelated to that of the easily soluble concentrations in the soils, suggesting that biological processes (e.g. plant-root processes) overshadow geochemical variation. The concentrations of K and Mg in cabbage, which showed a low spread and were strongly correlated to the NH4Ac extractable contents in the soil, were governed by both the bioavailable fractions in the topsoil and plant-uptake mechanisms. The plant´s ability to regulate its uptake of Ca and P (e.g. through root exudates) seemed to be more important than the influence of soil geochemistry. The distribution of P, K, Ca, Mg, Mn and S within humus, moss and needles in and around small towns was to a high degree controlled by biological cycling, which was indicated by the low correlation coefficients for P, K, Ca, Mg and S between humus and moss, and the low spread of these nutrients in moss and needles. The concentration variations of elements in till are mainly due to natural processes (e.g. intrusions, weathering, mineralogical variations in the bedrock). There was a strong spatial pattern for B in humus, moss and needles, which was suggested to be associated with anthropogenic emissions from nearby town centres. Geogenic dust affected the spatial distribution of Fe and Cr in moss, while natural processes governed the Fe anomaly found in the needles. The spatial accumulation patterns of Zn, Cd, Cu, Ni and Pb in humus and moss were strong and diverse, and related to current industry, the former steel industry, coal combustion, and natural geochemical processes. An intriguing Cu anomaly was found in moss. Since it was located close to a main railway line and because the railway line´s electric cables are made of Cu, it was suggested that the reason for the Cu anomaly is corrosion of these cables. In Western Finland, where AS soils are particularly abundant and enrich the metal concentrations of stream waters, cow milk and to some extent crops, an environmental risk assessment would be motivated to elucidate if the metal dispersion affect human health. Within this context, a topic of concern is the distribution of multiple sclerosis as high MS prevalence rates are found in the main area of AS soils. Regionally, the AS soil type in the Seinäjoki area has been demonstrated to be very severe in terms of metal leaching, this area also shows one of the highest MS rates reported worldwide. On a local scale, these severe AS soil types coincide well with the corresponding MS clustering along the Kyrönjoki River in Seinäjoki. There are reasons to suspect that these spatial correlations are causal, as multiple sclerosis has been suggested to result from a combination of genetic and environmental factors.

Managing innovation in oil and gas companies: A proposed framework for the management of innovation at Ecopetrol S.A.

Actually, the term innovation seems to be one of the most used in any kind of business practices. However, in order to get value from it, companies need to define a systematic and structured way to manage innovation. This process can be difficult and very risky since it is associated with the development of firm´s capabilities which involves human and technical challenges according to the context of a firm. Additionally, it seems not to exist a magic formula to manage innovation and what may work in a company may not work in another, even though in the same type of industry. In this sense, the purpose of this research is to identify how the oil and gas companies can manage innovation and what are the main elements, their interrelations and structure, required for managing innovation effectively in this critical sector for the world economy. The study follows a holistic single case study in a National Oil Company (NOC) of a developing country to explore how innovation performs in the industry, what are the main elements regarding innovation management and their interactions according to the nature of the industry. Contributory literature and qualitative data from the case study company (with the use of non-standardized interviews) is collected and analyzed. The research confirms the relevance and importance of the definition and implementation of an innovation framework in order to ensure the generation of value and organize as well as guide the efforts in innovation done by a firm. In this way based on the theoretical background, research´s findings, and in the company´s innovation environment and conditions, a framework for managing innovation at the case study company is suggested. This study is one of the few, if not only one, that has reviewed the way as oil and gas companies manage innovation and its practical implementation in a company from a developing country. Both researchers and practitioners will get a photograph of understanding innovation management in the oil and gas industry and its growing necessity in the business world. Some issues have been highlighted, so that future study can be focused in those directions. In fact, even though research on innovation management has significantly grown, there are still many issues that need to be addressed to get insight about managing innovation in various contexts and industries. Studies are mostly performed in the context of large firms and in developed countries, so then research in the context of developing countries is still almost an untouched area, especially in the oil and gas industry. Finally, from the research it seems crucial to explore the effect of some innovation-related variables such as: open innovation in third world economies and in state-own companies; the impact of mergers and acquisitions in innovation performance in oil and gas companies; value measurement in the first stages of the innovation process; and, development of innovation capabilities in companies from developing nations.

To Divide or Not to Divide; MicroRNAs and Small Compounds as Modulators of Mitosis

Mitosis is under the stringent quality control of the spindle assembly checkpoint (SAC). However, in cancer cells this control can fail, leading to excessive cellular proliferation and ultimately to the formation of a tumor. Novel cancer cell selective therapies are needed to stop the uncontrolled cell proliferation and tumor growth. The aim of the research presented in this thesis was to identify microRNAs (miRNAs) that could play a role in cancer cell proliferation as well as low molecular weight (LMW) compounds that could interfere with cell division. The findings could be used to develop better cancer diagnostics and therapies in the future. First, a high-throughput screen (HTS) was performed to identify LMW compounds that possess a similar chemical interaction field as rigosertib, an anti-cancer compound undergoing clinical trials. A compound termed Centmitor-1 was discovered that phenocopied the cellular impact of rigosertib by affecting the microtubule dynamics. Next, another HTS aimed at identifying compounds that would target the Hec1 protein, which mediates the interaction between spindle microtubules and chromosomes. Perturbation of this connection should prevent cell division and induce cell death. A compound termed VTT-006 was discovered that abrogated mitosis in several cell line models and exhibited binding to Hec1 in vitro. Lastly, using a cell-based HTS two miRNAs were identified that affected cancer cell proliferation via Aurora B kinase, which is an important mitotic regulator. MiR-378a-5p was found to indirectly suppress the production of the kinase whereas let-7b showed direct binding to the 3’UTR of Aurora B mRNA and repressed its translation. The miRNA-mediated perturbation of Aurora B induced defects in mitosis leading to abnormal chromosome segregation and induction of aneuploidy. The results of this thesis provide new information on miRNA signaling in cancer, which could be utilized for diagnostic purposes. Moreover, the thesis introduces two small compounds that may benefit future drug research.

Analyzing the Effects of the New Renewable Energy Policy in Russia on Investments into Wind, Solar and Small Hydro Power

This thesis presents an analysis of recently enacted Russian renewable energy policy based on capacity mechanism. Considering its novelty and poor coverage by academic literature, the aim of the thesis is to analyze capacity mechanism influence on investors’ decision-making process. The current research introduces a number of approaches to investment analysis. Firstly, classical financial model was built with Microsoft Excel® and crisp efficiency indicators such as net present value were determined. Secondly, sensitivity analysis was performed to understand different factors influence on project profitability. Thirdly, Datar-Mathews method was applied that by means of Monte Carlo simulation realized with Matlab Simulink®, disclosed all possible outcomes of investment project and enabled real option thinking. Fourthly, previous analysis was duplicated by fuzzy pay-off method with Microsoft Excel®. Finally, decision-making process under capacity mechanism was illustrated with decision tree. Capacity remuneration paid within 15 years is calculated individually for each RE project as variable annuity that guarantees a particular return on investment adjusted on changes in national interest rates. Analysis results indicate that capacity mechanism creates a real option to invest in renewable energy project by ensuring project profitability regardless of market conditions if project-internal factors are managed properly. The latter includes keeping capital expenditures within set limits, production performance higher than 75% of target indicators, and fulfilling localization requirement, implying producing equipment and services within the country. Occurrence of real option shapes decision-making process in the following way. Initially, investor should define appropriate location for a planned power plant where high production performance can be achieved, and lock in this location in case of competition. After, investor should wait until capital cost limit and localization requirement can be met, after that decision to invest can be made without any risk to project profitability. With respect to technology kind, investment into solar PV power plant is more attractive than into wind or small hydro power, since it has higher weighted net present value and lower standard deviation. However, it does not change decision-making strategy that remains the same for each technology type. Fuzzy pay-method proved its ability to disclose the same patterns of information as Monte Carlo simulation. Being effective in investment analysis under uncertainty and easy in use, it can be recommended as sufficient analytical tool to investors and researchers. Apart from described results, this thesis contributes to the academic literature by detailed description of capacity price calculation for renewable energy that was not available in English before. With respect to methodology novelty, such advanced approaches as Datar-Mathews method and fuzzy pay-off method are applied on the top of investment profitability model that incorporates capacity remuneration calculation as well. Comparison of effects of two different RE supporting schemes, namely Russian capacity mechanism and feed-in premium, contributes to policy comparative studies and exhibits useful inferences for researchers and policymakers. Limitations of this research are simplification of assumptions to country-average level that restricts our ability to analyze renewable energy investment region wise and existing limitation of the studying policy to the wholesale power market that leaves retail markets and remote areas without our attention, taking away medium and small investment into renewable energy from the research focus. Elimination of these limitations would allow creating the full picture of Russian renewable energy investment profile.

Pienen kiinteistösijoitusyhtiön kasvustrategia

Tämän pro gradu-tutkielman tarkoituksena oli tutkia minkälaisia kasvupyrkimyksiä Suomessa toimivilla pienillä kiinteistösijoittajilla tai kiinteistösijoitusyhtiöillä on. Tutkimuksen pohjaksi esiteltiin yrityksen strategiateoriaa ja kasvun malleja pienyritysnäkökulmasta. Tutkimuksen tulokset voivat antaa yrittäjille mietteitä kasvamisen suunnitelmallisuudesta ja sen hyödyistä. Tutkimusosuus suoritettiin laadullisena tutkimuksena. Aineisto kerättiin haastattelemalla 16 pientä kiinteistösijoittajaa nettipohjaisen kyselyn avulla. Painopiste oli vapaissa vastauksissa ja tällä pyrittiin saamaan laajoja mielipiteitä. Kohdeyritykset valittiin sattumalta tutkijan lähipiiriin kuuluvien yrittäjien avulla. Maantieteellinen jakauma oli laaja, koko maan kattava. Kohdeyrityksistä haastateltiin yhtä henkilöä, joka oli tyypillisesti yrityksen omistaja. Haastatteluista saatua materiaalia analysoitiin strategisten näkemysten ja yrityksen kasvuteorioiden valossa. Tutkimuksessa todettiin, että pienyrittäjät suhtautuvat kiinteistösijoittamiseen lähinnä säästämismuotona eikä niinkään systemaattisena yrittämisenä. Useat vastaajat tekivät kiinteistösijoittamista osa-aikaisesti. Kasvua tavoittelee kyllä valtaosa yrityksistä, mutta sen eteen ei tehdä juuri mitään. Odotellaan vain sopivia kohteita ostettavaksi. Kasvamisen määrä riippuu hyvin pitkälti yrittäjän persoonasta. Jos yrittäjä on kunnianhimoinen toiminnan kasvattaja, niin se heijastuu myös hänen harjoittamaan kiinteistösijoittamiseen.

McNeill's code : Arranged to meet the requirements of mi ning, metallurgical and civil engineers ; directors of mining, smetling and other companies...

UANL

Use of anti-infective drugs during pregnancy : prevalence, predictors of use and the risk of preterm birth and small-for-gestational-age newborns

Résumé: Les anti-infectieux sont parmi les médicaments les plus utilisés pendant la grossesse. Les indications pour l’utilisation de ces médicaments, telles que les infections bactériennes, figurent parmi les facteurs de risque les plus importants pour la prématurité et les enfants nés petits pour l'âge gestationnel («Small-for-gestational-age », SGA). Ces complications de la grossesse peuvent avoir des incidences sur la santé du nouveau né et sur son développement futur. Compte tenu des impacts sur la santé de la mère et de l’enfant, la prise en charge et le traitement efficace de ces infections sont impératifs. Cependant, l'utilisation des anti-infectieux, pour éviter des issues de grossesse défavorables, fait l’objet d’une controverse dans la littérature. Cette controverse est en partie liée à la qualité méthodologique discutable des études disponibles sur le sujet. Les quatre études présentées dans cette thèse ont donc pour objectif d’investiguer l’utilisation des anti-infectieux durant la grossesse ainsi que d’évaluer le risque de prématurité et de SGA après utilisation de ces médicaments en période gestationnelle. Une révision systématique de la littérature sur l’utilisation du métronidazole durant la grossesse est également présentée. Nous avons utilisé, comme source de données le Registre des Grossesses du Québec, une cohorte longitudinale conçue à partir du jumelage de trois bases de données administratives de la province du Québec (RAMQ, Med-Echo et ISQ). Le registre fournit des informations sur les prescriptions, les services pharmaceutiques et médicaux, ainsi que des donnés sur les soins d’hospitalisation de courte durée et démographiques. Les deux premières études présentées dans cette thèse ont eu pour objectif d’évaluer la prévalence, les tendances, les indications et les prédicteurs de l’utilisation des anti-infectieux dans une cohorte, extraite du registre, de 97 680 femmes enceintes. A l’aide d’un devis cas-témoins, les 2 dernières études ont mesuré l’association entre l’utilisation d’anti-infectieux durant les 2 derniers trimestres de grossesse et le risque de prématurité et de SGA, respectivement. Un cas de prématurité a été défini comme un accouchement survenu avant 37 semaines de gestation. Un cas de SGA a été défini comme l’accouchement d’un enfant dont le poids à la naissance se situe sous le 10ème percentile du poids normalisé à la naissance (compte tenu de l’âge gestationnel et du sexe du bébé). Les données ont été recueillies pour les agents systémiques oraux, ainsi que pour les classes et les agents individuels. Nos résultats ont montré que la prévalence de l’utilisation des anti-infectieux durant la grossesse était comparable à celle d’autres études déjà publiées (25%). Nous avons observé une augmentation de l’utilisation des agents plus anciens et ayant des profils d’innocuité connus. Les prédicteurs de l’usage en début de grossesse identifiés sont : avoir eu plus de deux différentes prescriptions (OR ajusté = 3,83, IC 95% : 3,3-4,3), avoir eu un diagnostic d’infection urinaire (OR= 1,50, IC 95% : 1,3-1,8) et un diagnostic d’infection respiratoire (OR= 1,40, IC 95% : 1,2-1,6). L’utilisation des macrolides a été associée à une diminution du risque de prématurité (OR =0,65, IC 95% : 0,50-0,85). En revanche, les femmes ayant été exposées au métronidazole ont vu leur risque augmenté de 80% (OR=1,81, IC 95% : 1,30-2,54). L’utilisation d’azithromycine a été associée à une diminution importante du risque chez les femmes ayant un diagnostic de rupture prématurée des membranes (OR=0,31, IC 95% : 0,10-0,93). Cependant, l'utilisation de sulfaméthoxazole-triméthoprime (SXT) a été significativement associée à une augmentation du risque de SGA (OR= 1,61, IC 95% : 1,16-2,23), tandis que celle des anti-infectieux urinaires a été associée à une diminution du risque (OR= 0,80, 95%CI : 0.65-0.97). Les conclusions de nos travaux suggèrent que l’utilisation des macrolides et des pénicillines diminuent le risque de prématurité et de SGA. Nous devons considérer l'utilisation de différents choix thérapeutiques tels que l’azithromycine, lors de la prise en charge des infections pouvant induire la prématurité et le SGA.

Preparation and characterization of micro and nano fiber reinforced natural rubber composites by latex stage processing

Use of short fibers as reinforcing fillers in rubber composites is on an increasing trend. They are popular due to the possibility of obtaining anisotropic properties, ease of processing and economy. In the preparation of these composites short fibers are incorporated on two roll mixing mills or in internal mixers. This is a high energy intensive time consuming process. This calls for developing less energy intensive and less time consuming processes for incorporation and distribution of short fibers in the rubber matrix. One method for this is to incorporate fibers in the latex stage. The present study is primarily to optimize the preparation of short fiber- natural rubber composite by latex stage compounding and to evaluate the resulting composites in terms of mechanical, dynamic mechanical and thermal properties. A synthetic fiber (Nylon) and a natural fiber (Coir) are used to evaluate the advantages of the processing through latex stage. To extract the full reinforcing potential of the coir fibers the macro fibers are converted to micro fibers through chemical and mechanical means. The thesis is presented in 7 chapters

Delocalization of a hole in van der Waals clusters: Ionization potential of rare-gas and small Hg_n clusters

The size dependence of the ionization potential I_p(n) of van der Waals (vdW) bound clusters has been calculated by using a model Hamiltonian, which includes electron hopping, vdW interactions, and charge-dipole interactions. The charge-density and dipole-density distributions for both neutral and ionized n-atom clusters are determined self-consistently. The competition between the polarization energy of the neutral atoms surrounding a partially localized hole and the tendency toward hole delocalization in the ionized clusters is found to dominate the size dependence of I_p(n). To test our theory, we culculate I_p(Xe_n) and I_p(Kr_n) for n \le 300. Good quantitative agreement with experiment is obtained. The theory is also applied to calculate I_p(Hg_n). Comparison with experiments suggests that in Hg_n^+ clusters with n \le 20 the positive charge is mainly distributed within a trimer which is situated at the center of the cluster and which polarizes the n - 3 surrounding neutral atoms.

Social Networks and Small World phenomena

Social Networking tools like Facebook yield recognisable small world phenomena, that is particular kinds of social graphs that facilitate particular kinds of interaction and information exchange.