Chronic Autoimmune Thyroiditis in Industrial Areas in Brazil: A 15-Year Survey

To investigate whether there is an increased incidence of chronic autoimmune thyroiditis (CAT) in individuals living in the vicinity of industrial plants that manufacture petroleum byproducts in the state of So Paulo, Brazil. Between 1989 and 2004, 6,306 patients of both sexes, from 5 to 78 years old were divided in two groups according to their home location: Group 1: 3,356 residents living near industrial plants that manufacture petroleum byproducts (Region A), and Group 2: 2,950 residents living far from Region A in an area with predominantly steel industries (Region B). For all patients, we measured the serum levels of antithyroglobulin antibody, antithyroperoxidase antibody, triiodothyronine, thyroxine, free thyroxine and thyrostimulating hormone. Sonographic scans of the thyroid gland were also conducted. The proportion of patients with CAT coming from Region A increased from 2.5 % (5 patients with CAT/200 total patients) in 1992 to 57.6 % (106 patients with CAT/184 total patients) in 2001. This striking increase was highly significant (p < 0.001). Similar findings were not observed in Region B. The difference in the number of patients with CAT between 1989 and 2004 coming from Region A and Region B was highly significant (p < 0.001), with 905 CAT patients (83.95 %) in Region A and 173 CAT patients (16.05 %) in Region B. Our results showed a striking increase in the incidence of CAT in residents in the vicinity of large industrial plants that manufacture petroleum byproducts compared with residents living near steel industries, which opens the field to new areas of research.

Application of the log-conformation tensor to three-dimensional time-dependent free surface flows

The numerical simulation of flows of highly elastic fluids has been the subject of intense research over the past decades with important industrial applications. Therefore, many efforts have been made to improve the convergence capabilities of the numerical methods employed to simulate viscoelastic fluid flows. An important contribution for the solution of the High-Weissenberg Number Problem has been presented by Fattal and Kupferman [J. Non-Newton. Fluid. Mech. 123 (2004) 281-285] who developed the matrix-logarithm of the conformation tensor technique, henceforth called log-conformation tensor. Its advantage is a better approximation of the large growth of the stress tensor that occur in some regions of the flow and it is doubly beneficial in that it ensures physically correct stress fields, allowing converged computations at high Weissenberg number flows. In this work we investigate the application of the log-conformation tensor to three-dimensional unsteady free surface flows. The log-conformation tensor formulation was applied to solve the Upper-Convected Maxwell (UCM) constitutive equation while the momentum equation was solved using a finite difference Marker-and-Cell type method. The resulting developed code is validated by comparing the log-conformation results with the analytic solution for fully developed pipe flows. To illustrate the stability of the log-conformation tensor approach in solving three-dimensional free surface flows, results from the simulation of the extrudate swell and jet buckling phenomena of UCM fluids at high Weissenberg numbers are presented. (C) 2012 Elsevier B.V. All rights reserved.

Numerical simulations of magma chamber dynamics at Campi Flegrei, and associated seismicity, deformation and gravity changes

Understanding the complex relationships between quantities measured by volcanic monitoring network and shallow magma processes is a crucial headway for the comprehension of volcanic processes and a more realistic evaluation of the associated hazard. This question is very relevant at Campi Flegrei, a volcanic quiescent caldera immediately north-west of Napoli (Italy). The system activity shows a high fumarole release and periodic ground slow movement (bradyseism) with high seismicity. This activity, with the high people density and the presence of military and industrial buildings, makes Campi Flegrei one of the areas with higher volcanic hazard in the world. In such a context my thesis has been focused on magma dynamics due to the refilling of shallow magma chambers, and on the geophysical signals detectable by seismic, deformative and gravimetric monitoring networks that are associated with this phenomenologies. Indeed, the refilling of magma chambers is a process frequently occurring just before a volcanic eruption; therefore, the faculty of identifying this dynamics by means of recorded signal analysis is important to evaluate the short term volcanic hazard. The space-time evolution of dynamics due to injection of new magma in the magma chamber has been studied performing numerical simulations with, and implementing additional features in, the code GALES (Longo et al., 2006), recently developed and still on the upgrade at the Istituto Nazionale di Geofisica e Vulcanologia in Pisa (Italy). GALES is a finite element code based on a physico-mathematical two dimensional, transient model able to treat fluids as multiphase homogeneous mixtures, compressible to incompressible. The fundamental equations of mass, momentum and energy balance are discretised both in time and space using the Galerkin Least-Squares and discontinuity-capturing stabilisation technique. The physical properties of the mixture are computed as a function of local conditions of magma composition, pressure and temperature.The model features enable to study a broad range of phenomenologies characterizing pre and sin-eruptive magma dynamics in a wide domain from the volcanic crater to deep magma feeding zones. The study of displacement field associated with the simulated fluid dynamics has been carried out with a numerical code developed by the Geophysical group at the University College Dublin (O’Brien and Bean, 2004b), with whom we started a very profitable collaboration. In this code, the seismic wave propagation in heterogeneous media with free surface (e.g. the Earth’s surface) is simulated using a discrete elastic lattice where particle interactions are controlled by the Hooke’s law. This method allows to consider medium heterogeneities and complex topography. The initial and boundary conditions for the simulations have been defined within a coordinate project (INGV-DPC 2004-06 V3_2 “Research on active volcanoes, precursors, scenarios, hazard and risk - Campi Flegrei”), to which this thesis contributes, and many researchers experienced on Campi Flegrei in volcanological, seismic, petrological, geochemical fields, etc. collaborate. Numerical simulations of magma and rock dynamis have been coupled as described in the thesis. The first part of the thesis consists of a parametric study aimed at understanding the eect of the presence in magma of carbon dioxide in magma in the convection dynamics. Indeed, the presence of this volatile was relevant in many Campi Flegrei eruptions, including some eruptions commonly considered as reference for a future activity of this volcano. A set of simulations considering an elliptical magma chamber, compositionally uniform, refilled from below by a magma with volatile content equal or dierent from that of the resident magma has been performed. To do this, a multicomponent non-ideal magma saturation model (Papale et al., 2006) that considers the simultaneous presence of CO2 and H2O, has been implemented in GALES. Results show that the presence of CO2 in the incoming magma increases its buoyancy force promoting convection ad mixing. The simulated dynamics produce pressure transients with frequency and amplitude in the sensitivity range of modern geophysical monitoring networks such as the one installed at Campi Flegrei . In the second part, simulations more related with the Campi Flegrei volcanic system have been performed. The simulated system has been defined on the basis of conditions consistent with the bulk of knowledge of Campi Flegrei and in particular of the Agnano-Monte Spina eruption (4100 B.P.), commonly considered as reference for a future high intensity eruption in this area. The magmatic system has been modelled as a long dyke refilling a small shallow magma chamber; magmas with trachytic and phonolitic composition and variable volatile content of H2O and CO2 have been considered. The simulations have been carried out changing the condition of magma injection, the system configuration (magma chamber geometry, dyke size) and the resident and refilling magma composition and volatile content, in order to study the influence of these factors on the simulated dynamics. Simulation results allow to follow each step of the gas-rich magma ascent in the denser magma, highlighting the details of magma convection and mixing. In particular, the presence of more CO2 in the deep magma results in more ecient and faster dynamics. Through this simulations the variation of the gravimetric field has been determined. Afterward, the space-time distribution of stress resulting from numerical simulations have been used as boundary conditions for the simulations of the displacement field imposed by the magmatic dynamics on rocks. The properties of the simulated domain (rock density, P and S wave velocities) have been based on data from literature on active and passive tomographic experiments, obtained through a collaboration with A. Zollo at the Dept. of Physics of the Federici II Univeristy in Napoli. The elasto-dynamics simulations allow to determine the variations of the space-time distribution of deformation and the seismic signal associated with the studied magmatic dynamics. In particular, results show that these dynamics induce deformations similar to those measured at Campi Flegrei and seismic signals with energies concentrated on the typical frequency bands observed in volcanic areas. The present work shows that an approach based on the solution of equations describing the physics of processes within a magmatic fluid and the surrounding rock system is able to recognise and describe the relationships between geophysical signals detectable on the surface and deep magma dynamics. Therefore, the results suggest that the combined study of geophysical data and informations from numerical simulations can allow in a near future a more ecient evaluation of the short term volcanic hazard.

Aircraft-based in-situ aerosol mass spectrometry: Chemical characterization and source identification of submicron particulate matter in the free and upper troposphere and lower stratosphere

The composition of the atmosphere is frequently perturbed by the emission of gaseous and particulate matter from natural as well as anthropogenic sources. While the impact of trace gases on the radiative forcing of the climate is relatively well understood the role of aerosol is far more uncertain. Therefore, the study of the vertical distribution of particulate matter in the atmosphere and its chemical composition contribute valuable information to bridge this gap of knowledge. The chemical composition of aerosol reveals information on properties such as radiative behavior and hygroscopicity and therefore cloud condensation or ice nucleus potential. rnThis thesis focuses on aerosol pollution plumes observed in 2008 during the POLARCAT (Polar Study using Aircraft, Remote Sensing, Surface Measurements and Models, of Climate, Chemistry, Aerosols, and Transport) campaign over Greenland in June/July and CONCERT (Contrail and Cirrus Experiment) campaign over Central and Western Europe in October/November. Measurements were performed with an Aerodyne compact time-of-flight aerosol mass spectrometer (AMS) capable of online size-resolved chemical characterization of non-refractory submicron particles. In addition, the origins of pollution plumes were determined by means of modeling tools. The characterized pollution episodes originated from a large variety of sources and were encountered at distinct altitudes. They included pure natural emissions from two volcanic eruptions in 2008. By the time of detection over Western Europe between 10 and 12 km altitude the plume was about 3 months old and composed to 71 % of particulate sulfate and 21 % of carbonaceous compounds. Also, biomass burning (BB) plumes were observed over Greenland between 4 and 7 km altitude (free troposphere) originating from Canada and East Siberia. The long-range transport took roughly one and two weeks, respectively. The aerosol was composed of 78 % organic matter and 22 % particulate sulfate. Some Canadian and all Siberian BB plumes were mixed with anthropogenic emissions from fossil fuel combustion (FF) in North America and East Asia. It was found that the contribution of particulate sulfate increased with growing influences from anthropogenic activity and Asia reaching up to 37 % after more than two weeks of transport time. The most exclusively anthropogenic emission source probed in the upper troposphere was engine exhaust from commercial aircraft liners over Germany. However, in-situ characterization of this aerosol type during aircraft chasing was not possible. All long-range transport aerosol was found to have an O:C ratio close to or greater than 1 implying that low-volatility oxygenated organic aerosol was present in each case despite the variety of origins and the large range in age from 3 to 100 days. This leads to the conclusion that organic particulate matter reaches a final and uniform state of oxygenation after at least 3 days in the free troposphere. rnExcept for aircraft exhaust all emission sources mentioned above are surface-bound and thus rely on different types of vertical transport mechanisms, such as direct high altitude injection in the case of a volcanic eruption, or severe BB, or uplift by convection, to reach higher altitudes where particles can travel long distances before removal mainly caused by cloud scavenging. A lifetime for North American mixed BB and FF aerosol of 7 to 11 days was derived. This in consequence means that emission from surface point sources, e.g. volcanoes, or regions, e.g. East Asia, do not only have a relevant impact on the immediate surroundings but rather on a hemispheric scale including such climate sensitive zones as the tropopause or the Arctic.

Biomedical and industrial applications of atmospheric pressure non-equilibrium plasmas

This dissertation will be focused on the characterization of an atmospheric pressure plasma jet source with an application oriented diagnostic approach and the description of processes supported by this plasma source. The plasma source investigated is a single electrode plasma jet. Schlieren images, optical emission spectra, temperature and heat flux profiles are analyzed to deeply investigate the fluid dynamic, the chemical composition and the thermal output of the plasma generated with a nanosecond-pulsed high voltage generator. The maximum temperature measured is about 45 °C and values close to the room temperature are reached 10 mm down the source outlet, ensuring the possibility to use the plasma jet for the treatment of thermosensitive materials, such as, for example, biological substrate or polymers. Electrospinning of polymeric solution allows the production of nanofibrous non-woven mats and the plasma pre-treatment of the solutions leads to the realization of defect free nanofibers. The use of the plasma jet allows the electrospinnability of a non-spinnable poly(L-lactic acid) (PLLA) solution, suitable for the production of biological scaffold for the wound dressing.

Reaction Control in Quiescent Systems of Free-Radical Retrograde-Precipitation Polymerization

Free-radical retrograde-precipitation polymerization, FRRPP in short, is a novel polymerization process discovered by Dr. Gerard Caneba in the late 1980s. The current study is aimed at gaining a better understanding of the reaction mechanism of the FRRPP and its thermodynamically-driven features that are predominant in controlling the chain reaction. A previously developed mathematical model to represent free radical polymerization kinetics was used to simulate a classic bulk polymerization system from the literature. Unlike other existing models, such a sparse-matrix-based representation allows one to explicitly accommodate the chain length dependent kinetic parameters. Extrapolating from the past results, mixing was experimentally shown to be exerting a significant influence on reaction control in FRRPP systems. Mixing alone drives the otherwise severely diffusion-controlled reaction propagation in phase-separated polymer domains. Therefore, in a quiescent system, in the absence of mixing, it is possible to retard the growth of phase-separated domains, thus producing isolated polymer nanoparticles (globules). Such a diffusion-controlled, self-limiting phenomenon of chain growth was also observed using time-resolved small angle x-ray scattering studies of reaction kinetics in quiescent systems of FRRPP. Combining the concept of self-limiting chain growth in quiescent FRRPP systems with spatioselective reaction initiation of lithography, microgel structures were synthesized in a single step, without the use of molds or additives. Hard x-rays from the bending magnet radiation of a synchrotron were used as an initiation source, instead of the more statistally-oriented chemical initiators. Such a spatially-defined reaction was shown to be self-limiting to the irradiated regions following a polymerization-induced self-assembly phenomenon. The pattern transfer aspects of this technique were, therefore, studied in the FRRP polymerization of N-isopropylacrylamide (NIPAm) and methacrylic acid (MAA), a thermoreversible and ionic hydrogel, respectively. Reaction temperature increases the contrast between the exposed and unexposed zones of the formed microgels, while the irradiation dose is directly proportional to the extent of phase separation. The response of Poly (NIPAm) microgels prepared from the technique described in this study was also characterized by small angle neutron scattering.

Volume of natural gas within gas-hydrate and free-gas occurrences in ODP Leg 164 sites

Leg 164 of the Ocean Drilling Program was designed to investigate the occurrence of gas hydrate in the sedimentary section beneath the Blake Ridge on the southeastern continental margin of North America. Sites 994, 995, and 997 were drilled on the Blake Ridge to refine our understanding of the in situ characteristics of natural gas hydrate. Because gas hydrate is unstable at surface pressure and temperature conditions, a major emphasis was placed on the downhole logging program to determine the in situ physical properties of the gas hydrate-bearing sediments. Downhole logging tool strings deployed on Leg 164 included the Schlumberger quad-combination tool (NGT, LSS/SDT, DIT, CNT-G, HLDT), the Formation MicroScanner (FMS), and the Geochemical Combination Tool (GST). Electrical resistivity (DIT) and acoustic transit-time (LSS/SDT) downhole logs from Sites 994, 995, and 997 indicate the presence of gas hydrate in the depth interval between 185 and 450 mbsf on the Blake Ridge. Electrical resistivity log calculations suggest that the gas hydrate-bearing sedimentary section on the Blake Ridge may contain between 2 and 11 percent bulk volume (vol%) gas hydrate. We have determined that the log-inferred gas hydrates and underlying free-gas accumulations on the Blake Ridge may contain as much as 57 trillion m**3 of gas.

Industrial Policy in Asia

This paper examines three types of industrialization that have occurred in East Asia: the Japanese, Chinese and generic Asian models. Industrial policies in Japan and the Republic of Korea (ROK) initially protected local companies from foreign investors by imposing high tariffs on foreign investors. But Japan began introducing liberalization policies to attract foreign direct investment (FDI) in the 1960s, and the ROK began to welcome foreign technology in the 1970s. Meanwhile, the governments of the ASEAN countries and Taiwan established export-processing zones (EPZ) to invite FDI by offering preferential treatment, such as tax deductions and exemptions. China adopted similar industrial policies and also established EPZs, attracting the capital and know-how of multinationals and thereby strengthening the international competitiveness of local enterprises. This paper reaches the following three conclusions. First, it would have been difficult for East Asian countries to grow without FDI. Second, central governments were a crucial factor in these countries' growth strategies. Third, EPZs offering preferential treatment can effectively enhance aggregate growth in developing countries, and the Asian experience shows that this strategy can be applied to other countries that satisfy certain preconditions.

Revisiting labour and gender issues in Export Processing Zones : the cases of South Korea, Bangladesh and India

The establishment of Export Processing Zones (EPZs) is a strategy for economic development that was introduced almost fifty years ago and is nowadays employed in a large number of countries. While the number of EPZs including several variants such as Special Economic Zone (SEZs) has increased continuously, general interest in EPZs has declined over the years in contrast to earlier heated debates regarding the efficacy of the strategy and its welfare effects especially on women workers. This article re-evaluates the historical trajectories and outstanding labour and gender issues of EPZs on the basis of the experiences of South Korea, Bangladesh and India. The findings suggest the necessity of enlarging our analytical scope with regard to EPZs, which are inextricably connected with external employment structures, whether outside the EPZ but within the same country, or outside the EPZ and its host country altogether.

Chapter 8 Location Choice of Japanese Multinationals: Country Characteristics or Region Characteristics?

In the present global era in which firms choose the location of their plants beyond national borders, location characteristics are important for attracting multinational enterprises (MNEs). The better access to countries with large market is clearly attractive for MNEs. For example, special treatments on tariffs such as the Generalized System of Preferences (GSP) are beneficial for MNEs whose home country does not have such treatments. Not only such country characteristics but also region characteristics (i.e. province-level or city-level ones) matter, particularly in the case that location characteristics differ widely between a nation's regions. The existence of industrial concentration, that is, agglomeration, is a typical regional characteristic. It is with consideration of these country-level and region-level characteristics that MNEs decide their location abroad. A large number of academic studies have investigated in what kinds of countries MNEs locate, i.e. location choice analysis. Employing the usual new economic geography model (i.e. constant elasticity of substitution (CES) utility function, Dixit-Stiglitz monopolistic competition, and ice-berg trade costs), the literature derives the profit function, of which coefficients are estimated using maximum likelihood procedures. Recent studies are as follows: Head, Rise, and Swenson (1999) for Japanese MNEs in the US; Belderbos and Carree (2002) for Japanese MNEs in China; Head and Mayer (2004) for Japanese MNEs in Europe; Disdier and Mayer (2004) for French MNEs in Europe; Castellani and Zanfei (2004) for large MNEs worldwide; Mayer, Mejean, and Nefussi (2007) for French MNEs worldwide; Crozet, Mayer, and Mucchielli (2004) for MNEs in France; and Basile, Castellani, and Zanfei (2008) for MNEs in Europe. At the present time, three main topics can be found in this literature. The first introduces various location elements as independent variables. The above-mentioned new economic geography model usually yields the profit function, which is a function of market size, productive factor prices, price of intermediate goods, and trade costs. As a proxy for the price of intermediate goods, the measure of agglomeration is often used, particularly the number of manufacturing firms. Some studies employ more disaggregated numbers of manufacturing firms, such as the number of manufacturing firms with the same nationality as the firms choosing the location (e.g., Head et al., 1999; Crozet et al., 2004) or the number of firms belonging to the same firm group (e.g., Belderbos and Carree, 2002). As part of trade costs, some investment climate measures have been examined: free trade zones in the US (Head et al., 1999), special economic zones and opening coastal cities in China (Belderbos and Carree, 2002), and Objective 1 structural funds and cohesion funds in Europe (Basile et al., 2008). Second, the validity of proxy variables for location elements is further examined. Head and Mayer (2004) examine the validity of market potential on location choice. They propose the use of two measures: the Harris market potential index (Harris, 1954) and the Krugman-type index used in Redding and Venables (2004). The Harris-type index is simply the sum of distance-weighted real GDP. They employ the Krugman-type market potential index, which is directly derived from the new economic geography model, as it takes into account the extent of competition (i.e. price index) and is constructed using estimators of importing country dummy variables in the well-known gravity equation, as in Redding and Venables (2004). They find that "theory does not pay", in the sense that the Harris market potential outperforms Krugman's market potential in both the magnitude of its coefficient and the fit of the model to be estimated. The third topic explores the substitution of location by examining inclusive values in the nested-logit model. For example, using firm-level data on French investments both in France and abroad over the 1992-2002 period, Mayer et al. (2007) investigate the determinants of location choice and assess empirically whether the domestic economy has been losing attractiveness over the recent period or not. The estimated coefficient for inclusive value is strongly significant and near unity, indicating that the national economy is not different from the rest of the world in terms of substitution patterns. Similarly, Disdier and Mayer (2004) investigate whether French MNEs consider Western and Eastern Europe as two distinct groups of potential host countries by examining the coefficient for the inclusive value in nested-logit estimation. They confirm the relevance of an East-West structure in the country location decision and furthermore show that this relevance decreases over time. The purpose of this paper is to investigate the location choice of Japanese MNEs in Thailand, Cambodia, Laos, Myanmar, and Vietnam, and is closely related to the third topic mentioned above. By examining region-level location choice with the nested-logit model, I investigate the relative importance of not only country characteristics but also region characteristics. Such investigation is invaluable particularly in the case of location choice in those five countries: industrialization remains immature in those countries which have not yet succeeded in attracting enough MNEs, and as a result, it is expected that there are not yet crucial regional variations for MNEs within such a nation, meaning the country characteristics are still relatively important to attract MNEs. To illustrate, in the case of Cambodia and Laos, one of the crucial elements for Japanese MNEs would be that LDC preferential tariff schemes are available for exports from Cambodia and Laos. On the other hand, in the case of Thailand and Vietnam, which have accepted a relatively large number of MNEs and thus raised the extent of regional inequality, regional characteristics such as the existence of agglomeration would become important elements in location choice. Our sample countries seem, therefore, to offer rich variations for analyzing the relative importance between country characteristics and region characteristics. Our empirical strategy has a further advantage. As in the third topic in the location choice literature, the use of the nested-logit model enables us to examine substitution patterns between country-based and region-based location decisions by MNEs in the concerned countries. For example, it is possible to investigate empirically whether Japanese multinational firms consider Thailand/Vietnam and the other three countries as two distinct groups of potential host countries, by examining the inclusive value parameters in nested-logit estimation. In particular, our sample countries all experienced dramatic changes in, for example, economic growth or trade costs reduction during the sample period. Thus, we will find the dramatic dynamics of such substitution patterns. Our rigorous analysis of the relative importance between country characteristics and region characteristics is invaluable from the viewpoint of policy implications. First, while the former characteristics should be improved mainly by central government in each country, there is sometimes room for the improvement of the latter characteristics by even local governments or smaller institutions such as private agencies. Consequently, it becomes important for these smaller institutions to know just how crucial the improvement of region characteristics is for attracting foreign companies. Second, as economies grow, country characteristics become similar among countries. For example, the LCD preferential tariff schemes are available only when a country is less developed. Therefore, it is important particularly for the least developed countries to know what kinds of regional characteristics become important following economic growth; in other words, after their country characteristics become similar to those of the more developed countries. I also incorporate one important characteristic of MNEs, namely, productivity. The well-known Helpman-Melitz-Yeaple model indicates that only firms with higher productivity can afford overseas entry (Helpman et al., 2004). Beyond this argument, there may be some differences in MNEs' productivity among our sample countries and regions. Such differences are important from the viewpoint of "spillover effects" from MNEs, which are one of the most important results for host countries in accepting their entry. The spillover effects are that the presence of inward foreign direct investment (FDI) aises domestic firms' productivity through various channels such as imitation. Such positive effects might be larger in areas with more productive MNEs. Therefore, it becomes important for host countries to know how much productive firms are likely to invest in them. The rest of this paper is organized as follows. Section 2 takes a brief look at the worldwide distribution of Japanese overseas affiliates. Section 3 provides an empirical model to examine their location choice, and lastly, we discuss future works to estimate our model.

A UGV Navigation System for Large Outdoor Environments Including Virtual Obstacles for No-Go Zones

This work presents a navigation system for UGVs in large outdoor environments; virtual obstacles are added to the system in order to avoid zones that may present risks to the UGV or the elements in its surroundings. The platform, software architecture and the modifications necessary to handle the virtual obstacles are explained in detail. Several tests have been performed and their results show that the system proposed is capable of performing safe navigation in complex environments.