Measurement of the mechanical power of walking by satellite positioning system (GPS).

PURPOSE: This descriptive article illustrates the application of Global Positioning System (GPS) professional receivers in the field of locomotion studies. The technological challenge was to assess the external mechanical work in outdoor walking. METHODS: Five subjects walked five times during 5 min on an athletic track at different imposed stride frequency (from 70-130 steps x min(-1)). A differential GPS system (carrier phase analysis) measured the variation of the position of the trunk at 5 Hz. A portable indirect calorimeter recorded breath-by-breath energy expenditure. RESULTS: For a walking speed of 1.05 +/- 0.11 m x s(-1), the vertical lift of the trunk (43 +/- 14 mm) induced a power of 46.0 +/- 20.4 W. The average speed variation per step (0.15 +/- 0.03 m x s(-1)) produced a kinetic power of 16.9 +/- 7.2 W. As compared with commonly admitted values, the energy exchange (recovery) between the two energy components was low (39.1 +/- 10.0%), which induced an overestimated mechanical power (38.9 +/- 18.3 W or 0.60 W x kg(-1) body mass) and a high net mechanical efficiency (26.9 +/- 5.8%). CONCLUSION: We assumed that the cause of the overestimation was an unwanted oscillation of the GPS antenna. It is concluded that GPS (in phase mode) is now able to record small body movements during human locomotion, and constitutes a promising tool for gait analysis of outdoor unrestrained walking. However, the design of the receiver and the antenna must be adapted to human experiments and a thorough validation study remains to be conducted.

Improvement of walking speed prediction by accelerometry and altimetry, validated by satellite positioning.

Activity monitors based on accelerometry are used to predict the speed and energy cost of walking at 0% slope, but not at other inclinations. Parallel measurements of body accelerations and altitude variation were studied to determine whether walking speed prediction could be improved. Fourteen subjects walked twice along a 1.3 km circuit with substantial slope variations (-17% to +17%). The parameters recorded were body acceleration using a uni-axial accelerometer, altitude variation using differential barometry, and walking speed using satellite positioning (DGPS). Linear regressions were calculated between acceleration and walking speed, and between acceleration/altitude and walking speed. These predictive models, calculated using the data from the first circuit run, were used to predict speed during the second circuit. Finally the predicted velocity was compared with the measured one. The result was that acceleration alone failed to predict speed (mean r = 0.4). Adding altitude variation improved the prediction (mean r = 0.7). With regard to the altitude/acceleration-speed relationship, substantial inter-individual variation was found. It is concluded that accelerometry, combined with altitude measurement, can assess position variations of humans provided inter-individual variation is taken into account. It is also confirmed that DGPS can be used for outdoor walking speed measurements, opening up new perspectives in the field of biomechanics.

The positioning of colectomy in the treatment of ulcerative colitis in the era of biologic therapy.

The position of surgery in the treatment of ulcerative colitis (UC) has changed in the era of biologics. Several important questions arise in determining the optimal positioning of surgery in the treatment of UC, which has long been a challenge facing gastroenterologists and surgeons. Surgery is life-saving in some patients and leads to better bowel function and better quality of life in most patients. The benefits of surgery, however, must be weighed against the potential surgical morbidity and compromised functioning that clearly can occur. The introduction of biologic therapy has added further complexity to decisions about medical management, surgery, and the relative timing of these choices. Appropriate medical management of UC may induce and maintain remission and may prevent surgery. However, medical management also carries risks of adverse effects, and recent data suggest that delay of surgery during ineffective medical therapy can increase the chances of negative surgical outcomes. To make individualized timely treatment decisions, early collaboration between gastroenterologists and surgeons is important and more data on predictors of treatment response and positive outcomes are needed. Early identification of patients who would benefit from biologic therapy or surgery is challenging.

Spanish E-Consumer Segmentation and Positioning in Virtual Supermarkets Sector

This article analyses different factors that influence the purchasing behaviour of online supermarket customers. These factors are related to both the appearance of the website as well as the processes that take place when making the purchase. Based on these analyses, the various groups of consumers with homogenous behaviour are studied and positioned according to their attitudes. The analysis also allows the quality of the service offered by this kind of establishment to be defined, as well as the main dimensions in which it develops. In the conclusions, factors which should influence the manager of an online supermarket to improve the quality of its service are given

Description of a robotics-oriented relational positioning methodology

This paper presents a relational positioning methodology for flexibly and intuitively specifying offline programmed robot tasks, as well as for assisting the execution of teleoperated tasks demanding precise movements.In relational positioning, the movements of an object can be restricted totally or partially by specifying its allowed positions in terms of a set of geometric constraints. These allowed positions are found by means of a 3D sequential geometric constraint solver called PMF – Positioning Mobile with respect to Fixed. PMF exploits the fact that in a set of geometric constraints, the rotational component can often be separated from the translational one and solved independently.

The Arabidopsis PHYTOCHROME KINASE SUBSTRATE2 protein is a phototropin signaling element that regulates leaf flattening and leaf positioning.

In Arabidopsis (Arabidopsis thaliana), the blue light photoreceptor phototropins (phot1 and phot2) fine-tune the photosynthetic status of the plant by controlling several important adaptive processes in response to environmental light variations. These processes include stem and petiole phototropism (leaf positioning), leaf flattening, stomatal opening, and chloroplast movements. The PHYTOCHROME KINASE SUBSTRATE (PKS) protein family comprises four members in Arabidopsis (PKS1-PKS4). PKS1 is a novel phot1 signaling element during phototropism, as it interacts with phot1 and the important signaling element NONPHOTOTROPIC HYPOCOTYL3 (NPH3) and is required for normal phot1-mediated phototropism. In this study, we have analyzed more globally the role of three PKS members (PKS1, PKS2, and PKS4). Systematic analysis of mutants reveals that PKS2 (and to a lesser extent PKS1) act in the same subset of phototropin-controlled responses as NPH3, namely leaf flattening and positioning. PKS1, PKS2, and NPH3 coimmunoprecipitate with both phot1-green fluorescent protein and phot2-green fluorescent protein in leaf extracts. Genetic experiments position PKS2 within phot1 and phot2 pathways controlling leaf positioning and leaf flattening, respectively. NPH3 can act in both phot1 and phot2 pathways, and synergistic interactions observed between pks2 and nph3 mutants suggest complementary roles of PKS2 and NPH3 during phototropin signaling. Finally, several observations further suggest that PKS2 may regulate leaf flattening and positioning by controlling auxin homeostasis. Together with previous findings, our results indicate that the PKS proteins represent an important family of phototropin signaling proteins.

Translation of polarity cues into asymmetric spindle positioning in "Caenorhabditis elegans"

Abstract: Asymmetric cell division is important to generate tissue diversity. The Caenorhabditis elegans embryo is well suited to study the mechanisms of asymmetric cell division. In wild type one-cell stage embryos, the spindle sets up along the anterior-posterior axis (AP). During anaphase, the spindle elongates. While the anterior spindle pole is relatively immobile, the posterior spindle pole moves towards the posterior cortex during anaphase leading to an asymmetric spindle position. As a result, the first cleavage gives rise to a large anterior blastomere and a smaller posterior one, which differs also in cell fate determinants. This posterior spindle displacement occurs in response to polarity cues set up along the AP axis by the PAR proteins and is due to imbalanced pulling forces acting on the two spindle poles, with net forces acting on the posterior spindle pole being more extensive than those at the anterior one. The project of my thesis was to characterize the involvement of two new components, gpr-1 and gpr-2, in spindle positioning. These genes encode essentially identical proteins containing a GoLoco motif characteristic of proteins interacting with α subunits of heterotrimeric G protein (Gα). In gpr-1/2(RNAi) embryos and in embryos lacking simultaneously two α subunits, goa-1 and gpa-16, (Ga(RNAi) embryos), there is a minimal posterior displacement of the spindle during anaphase, and the first division is equal. I found that the pulling forces acting on the two spindle poles is weak and equal in gpr-1/2(RNAi) and Gα (RNAi) embryos. I found that GPR-1/2 acts downstream of polarity cues for generation of pulling forces. Furthermore, I showed that GPR-1/2 distribution was enriched at the posterior cortex during metaphase whereas GOA-1 and GPA-16 were uniformly distributed at the cell cortex throughout the cell cycle. Gα subunits oscillate between GDP- and GTP-bound forms. Gα signaling is turned on by GDP/GTP exchange catalyzed by guanine nucleotide exchange factors (GEFs) and turned off by hydrolysis of GTP catalyzed by GTPase activating proteins (GAPs). A third class of proteins, the guanine dissociation inhibitors (GDIs), binds the GDP-bound form of Gα subunits and inhibits nucleotide exchange. I found that GPR-1/2 acts as a GDI for GOA-1. Taken together, my findings suggest a model in which differential activation of Gα subunits along the AP axis may translate into generation of differential pulling forces on the anterior and posterior spindle poles, and, thus, asymmetric cell division. Résumé L'embryon du nématode Caenorhabditis elegans est un modèle approprié pour étudier les mécanismes de la division asymétrique. Chez l'embryon précoce, le fuseau mitotique se forme le long de l'axe antéro-postérieur (A/P) et au centre de l'embryon, le pôle antérieur restant relativement immobile alors que le pôle postérieur du fuseau se déplace vers le cortex postérieur au cours de l'anaphase conduisant à une position excentrée du fuseau. 11 en résulte une première division qui génère un blastomère antérieur et postérieur de grande et petite taille respectivement et qui diffèrent en facteurs développementaux. Ce déplacement postérieur se produit en réponse de la polarité établie par la distribution polarisée des protéines PAR et est le résultat de la génération de forces inégales tirant sur les deux pôles du fuseau, les forces agissant sur le pôle postérieur du fuseau étant plus grandes. Le projet de ma thèse était d'identifier la fonction de deux nouveaux constituants, gpr-1 et gpr-2 dans le positionnement asymétrique du fuseau. Ces gènes codent essentiellement pour la même protéine qui contient un motif GoLoco, caractéristique des protéines interagissant avec la sous-unité alpha des protéines G hétérotrimériques. Chez l'embryon gpr-1/2(RNAi) et chez les embryons dépourvus d'activité de deux sous-unités alpha, goa-1 et gpa-16, (Gα(RNAi)), j'ai montré qu'il y avait un déplacement minimal du fuseau vers le pôle postérieur au cours de l'anaphase et la première division est symétrique en raison de forces faibles et égales agissant sur les deux pôles du fuseau. J'ai également montré que gpr-1/2 était requis en aval des signaux établissant la polarité pour générer les forces responsables du positionnement asymétrique du fuseau. De plus, j'ai montré que GPR-1/2 était enrichi au pôle postérieur lors de la métaphase alors que GOA-1 et GPA-16 étaient localisés de façon uniforme au cortex de l'embryon précoce. Gas oscillent entre une forme liée au GDP et une forme liée au GTP. La signalisation des Gas est activée par l'échange GDP/GTP qui est catalysé par des protéines GEFs. La signalisation des Gas est désactivée par l'hydrolyse du GTP qui est catalysée par des protéines GAPs. Une troisième classe de protéines, GDIs lie la forme GDP et inhibe l'échange de nucléotides. J'ai montré que GPR-1/2 agissait comme un GDI pour GOA-1. Mes résultats suggèrent un modèle dans lequel une activation différentielle des Gα le long de l'axe A/P pourrait générer des forces différentielles sur le pôle antérieur et postérieur du fuseau.

Competitive positioning of Spanish agricultural cooperatives

Cooperatives are the basis of the social economy in many agricultural sectors. The present research work investigates the management situation of the olive oil cooperatives in Catalonia. The study identifies a typology of cooperatives based on their attitudes towards to the sector. A positioning map of the different types of cooperatives is then established on the basis of their characteristics. The study concludes with important managerial aspects of olive oil cooperatives in Catalonia.

Positioning Wireless Mobile Terminal Devices

Positioning techniques enable the positioning of mobile transportation vehicles. Location information can be used in transport planning as well as in vehicles. Information can also be transferred between vehicles and transport planning. For example, pickup and delivery information and route instructions can be exchanged wirelessly. In this thesis, techniques suitable for positioning vehicles are studied, as well as techniques enabling wireless connectivity of the vehicles to the transport planning system. A prototype based on one positioning and connectivity technique is implemented. As a result, a system capable of positioning vehicles is created. The vehicles can be located almost in real-time. The accuracy in positioning is sufficient to visualise the locations on a good quality 1:20000 city map.

Use of neural networks in robot positioning of large flexible redundant manipulators

Deflection compensation of flexible boom structures in robot positioning is usually done using tables containing the magnitude of the deflection with inverse kinematics solutions of a rigid structure. The number of table values increases greatly if the working area of the boom is large and the required positioning accuracy is high. The inverse kinematics problems are very nonlinear, and if the structure is redundant, in some cases it cannot be solved in a closed form. If the structural flexibility of the manipulator arms is taken into account, the problem is almost impossible to solve using analytical methods. Neural networks offer a possibility to approximate any linear or nonlinear function. This study presents four different methods of using neural networks in the static deflection compensation and inverse kinematics solution of a flexible hydraulically driven manipulator. The training information required for training neural networks is obtained by employing a simulation model that includes elasticity characteristics. The functionality of the presented methods is tested based on the simulated and measured results of positioning accuracy. The simulated positioning accuracy is tested in 25 separate coordinate points. For each point, the positioning is tested with five different mass loads. The mean positioning error of a manipulator decreased from 31.9 mm to 4.1 mm in the test points. This accuracy enables the use of flexible manipulators in the positioning of larger objects. The measured positioning accuracy is tested in 9 separate points using three different mass loads. The mean positioning error decreased from 10.6 mm to 4.7 mm and the maximum error from 27.5 mm to 11.0 mm.

Brand positioning for sport goods

The objective of this study was to find out how Exel position itself against its most important competitors, and how it could strengthen its own position in the future. Both end and intermediate customers was researched about their preferences and how the decision process could be influenced. The research was done by telephone interviews and the data was analyzed by statistical methods. The results showed that the decision making when buying floorball sticks is mainly influenced by the image of the brand and the popularity of the brand, rather than the actual technical abilities of the stick.

Metodologia para avaliação do desempenho de receptor de GPS de uso agrícola em condição cinemática

São inúmeras as aplicações das tecnologias de Global Navigation Satellite System (GNSS), e o sistema mais utilizado é o Global Positioning System (GPS), desenvolvido pelos Estados Unidos. Em aplicações agrícolas, há a necessidade de posicionamento estático e cinemático, com demandas de distintos níveis de acurácia. No entanto, os usuários carecem de informação quanto ao desempenho cinemático de receptores GNSS, sendo disponibilizados apenas dados de desempenho estático, e por essa razão desenvolveu-se um veículo instrumentado para testar metodologia de avaliação do desempenho de receptores GNSS sob condição cinemática, visando a representar operações agrícolas. Foi utilizada instrumentação para coletar os dados sob variação de velocidade e sentido de percurso circular. A partir de ensaio experimental, verificou-se que a metodologia possibilita o cálculo da acurácia e da precisão, necessitando apenas de melhorias nos equipamentos de aquisição de dados em ensaios de longa duração.

Método de avaliação de equipamentos para direcionamento de veículos agrícolas e efeito de sinais de GNSS

Pesquisas indicam que o uso de novas técnicas no campo da mecanização agrícola, como o tráfego controlado por meio de direcionamento com auxílio de Sistemas de Navegação Global por Satélites (GNSS), pode diminuir as exigências por energia associadas às operações de campo e aumentar a produtividade da mão de obra e da cultura. Alguns autores já utilizaram diferentes metodologias para avaliar erros de paralelismo em sistemas de orientação de veículos, porém não há um procedimento-padrão para medi-los. Sendo assim, o objetivo deste trabalho foi implementar uma planilha eletrônica específica, determinar e comparar a acurácia no paralelismo de dois sistemas distintos de orientação de veículos (uma barra de luz e um piloto automático com atuador de volante) em trajetórias retilíneas e utilizando sinal de GPS com dois sistemas de correção diferencial (um com algoritmo interno e outro, um sinal via satélite com acurácia submétrica). Para a avaliação dos sistemas de correção, utilizou-se como referência o sinal de correção diferencial RTK (Real Time Kinematic) para realização de cinco passadas paralelas sucessivas para cada sistema de correção, caracterizando cinco repetições de cada tratamento. A planilha viabilizou o método de avaliação utilizado e os erros apresentados para as correções nos dois equipamentos analisados mostraram-se compatíveis com operações que exijam acurácia de paralelismo da ordem de decímetros.

GPS receivers for georeferencing of spatial variability of soil attributes

The characterization of the spatial variability of soil attributes is essential to support agricultural practices in a sustainable manner. The use of geostatistics to characterize spatial variability of these attributes, such as soil resistance to penetration (RP) and gravimetric soil moisture (GM) is now usual practice in precision agriculture. The result of geostatistical analysis is dependent on the sample density and other factors according to the georeferencing methodology used. Thus, this study aimed to compare two methods of georeferencing to characterize the spatial variability of RP and GM as well as the spatial correlation of these variables. Sampling grid of 60 points spaced 20 m was used. For RP measurements, an electronic penetrometer was used and to determine the GM, a Dutch auger (0.0-0.1 m depth) was used. The samples were georeferenced using a GPS navigation receiver, Simple Point Positioning (SPP) with navigation GPS receiver, and Semi-Kinematic Relative Positioning (SKRP) with an L1 geodetic GPS receiver. The results indicated that the georeferencing conducted by PPS did not affect the characterization of spatial variability of RP or GM, neither the spatial structure relationship of these attributes.

Positioning of fertilizer in corn sowing

The aim of this study was to determine whether the form of placing the fertilizer by the planter during the sowing under mulch in the no till system affects the yield of corn. The treatments consisted of placing the fertilizer during the seeding 0.05 m below and beside the seed, in front of the cutting blade and without fertilizer, in 03 farms during 03 cropping years. The experimental design at each farm was the randomized block, with 08 repetitions, whose plots had 30 m² each. The initial population and yield components were evaluated. Under the experimental conditions it is concluded that base fertilization can affect the yield. Fertilizer placement can affect the initial stand, but not the yield.