On boundary value problems for Willmore surfaces and Hartree-Fock theory of pseudo-relativistic atoms

Magdeburg, Univ., Fak. für Mathematik, kumulative Habil.-Schr., 2011

Growth of semi-polar GaN on high index silicon (11h) substrates by metal organic vapor phase epitaxy

Magdeburg, Univ., Fak. für Naturwiss., Diss., 2014

Wachstumsoptimierung und Charakterisierung von MOVPE-basierten GaN Pufferstrukturen auf Si(111) Substraten

Magdeburg, Univ., Fak. für Naturwiss., Diss., 2014

On an upper bound for the arithmetic self-intersection number of the dualizing sheaf on arithmetic surfaces

Vegeu el resum a l'inici del document del fitxer adjunt

Intersection Pairing and intersection motive of surfaces

We construct the Chow motive modelling intersection co-homology of a proper surface. We then study its functoriality properties. Using Murre's decompositions of the motive of a desingularization into KÄunneth components [Mr1], we show that such decompositions exist also for the intersection motive.

Pure motives, mixed motives and extensions of motives associated to singular surfaces

We first recall the construction of the Chow motive modelling intersection cohomology of a proper surface X and study its fundamental properties. Using Voevodsky's category of effective geometrical motives, we then study the motive of the exceptional divisor D in a non-singular blow-up of X. If all geometric irreducible components of D are of genus zero, then Voevodsky's formalism allows us to construct certain one-extensions of Chow motives, as canonical subquotients of the motive with compact support of the smooth part of X. Specializing to Hilbert-Blumenthal surfaces, we recover a motivic interpretation of a recent construction of A. Caspar.

Random graphs on surfaces

Counting labelled planar graphs, and typical properties of random labelled planar graphs, have received much attention recently. We start the process here of extending these investigations to graphs embeddable on any fixed surface S. In particular we show that the labelled graphs embeddable on S have the same growth constant as for planar graphs, and the same holds for unlabelled graphs. Also, if we pick a graph uniformly at random from the graphs embeddable on S which have vertex set {1, . . . , n}, then with probability tending to 1 as n → ∞, this random graph either is connected or consists of one giant component together with a few nodes in small planar components.

A simple method for assessing the binding of concanavalin A to mononuclear cell surfaces: no interference of visceral leishmaniasis serum on this binding

We report a simple method for evaluating the binding of concanavalin A (ConA) to human peripheral blood mononuclear cells (PBMC). The binding is evidenced by an immunoenzymic assay using peroxidase-conjugated immunoglobulins of a rabbit anti-ConA serum. Using the method we show that sera from patients with American leishmaniasis do not interfere with binding of ConA to PBMC.

Role of secretory immunoglobulin A and secretory component in the protection of mucosal surfaces.

The contribution of secretory immunoglobulin A (SIgA) antibodies in the defense of mucosal epithelia plays an important role in preventing pathogen adhesion to host cells, therefore blocking dissemination and further infection. This mechanism, referred to as immune exclusion, represents the dominant mode of action of the antibody. However, SIgA antibodies combine multiple facets, which together confer properties extending from intracellular and serosal neutralization of antigens, activation of non-inflammatory pathways and homeostatic control of the endogenous microbiota. The sum of these features suggests that future opportunities for translational application from research-based knowledge to clinics include the mucosal delivery of bioactive antibodies capable of preserving immunoreactivity in the lung, gastrointestinal tract, the genito-urinary tract for the treatment of infections. This article covers topics dealing with the structure of SIgA, the dissection of its mode of action in epithelia lining different mucosal surfaces and its potential in immunotherapy against infectious pathogens.

A computational and geometric approach to phase resetting curves and surfaces

"Vegeu el resum a l'inici del document del fitxer adjunt."

Characterisation of microbial communities colonising the hyphal surfaces of arbuscular mycorrhizal fungi.

Arbuscular mycorrhizal fungi (AMF) are symbiotic soil fungi that are intimately associated with the roots of the majority of land plants. They colonise the interior of the roots and the hyphae extend into the soil. It is well known that bacterial colonisation of the rhizosphere can be crucial for many pathogenic as well as symbiotic plant-microbe interactions. However, although bacteria colonising the extraradical AMF hyphae (the hyphosphere) might be equally important for AMF symbiosis, little is known regarding which bacterial species would colonise AMF hyphae. In this study, we investigated which bacterial communities might be associated with AMF hyphae. As bacterial-hyphal attachment is extremely difficult to study in situ, we designed a system to grow AMF hyphae of Glomus intraradices and Glomus proliferum and studied which bacteria separated from an agricultural soil specifically attach to the hyphae. Characterisation of attached and non-attached bacterial communities was performed using terminal restriction fragment length polymorphism and clone library sequencing of 16S ribosomal RNA (rRNA) gene fragments. For all experiments, the composition of hyphal attached bacterial communities was different from the non-attached communities, and was also different from bacterial communities that had attached to glass wool (a non-living substratum). Analysis of amplified 16S rRNA genes indicated that in particular bacteria from the family of Oxalobacteraceae were highly abundant on AMF hyphae, suggesting that they may have developed specific interactions with the fungi.

Residual effect of lambdacyhalothrin on Triatoma infestans

Insecticidal residual effect and triatomine infestation rates in houses of a community fumigated with lambdcyhalothrin (Icon) are reported. No mortality was observed in 5th-instar Triatoma infestans nymphs in 72-hr exposure test on three different surfaces, one month after fumigation for a dose of 31.5 mg am/m2. However, during post-exposure observation a mortality of 60% was recorded for those insect exposed on sprayed woodboard. The results observed with mud-containing treated walls, were markedly poorer (0% of mortality). Twelve month after spraying 40% of mortality was observed on first-instar T. infestans nymphs in 72-hr exposure test on woodboard, but lower mortality rates were observed in mud-containing materials. When the effect of deltamethrin (109 mg ai/m2) and lambdcyhalothrin (94 mg ai/m2) was compared, the former did not appear to be superior at similar loads. Both have showed a mortality rate of 30% on 5th-instar T. infestans nymphs three months post-fumigation. The dose utilized in the field fumigation was enough to get a significant (p < 0.0001) control of triatomine domestic infestation, since it was sufficient to keep 95% of the houses uninfested throughout 21 months following treatment, when compared with baseline situation. A remarkable knock-down effect on adult and nymphs forms of the insect and a high in situ mortality were observed as a result of its application, even at very low doses.

Multiple facets of secretory immunoglobulin A at mucosal surfaces

Résumé : Le condylome acuminé anal (CAA), transmis par contact sexuel, résulte d'une infection par Human Papilloma Virus (HPV). Son traitement chirurgical est grevé d'un taux de récidive de 4-29%. Le but de cette étude était d'identifier une éventuelle corrélation entre type d'HPV présent dans les CAA excisés chirurgicalement et taux de récidive de la maladie, ? Cette étude rétrospective porte sur 140 patients opérés au Centre Hospitalier Universitaire Vaudois de CAA, entre 1990 et 2005. Le diagnostic lésionnel a été confirmé par un examen histomorphologique. Le(s) type(s) d'HPV présent(s) dans ces lésions a été déterminé par Polymerase Chain Reaction (PCR). Les patients ont donné leur accord à cette analyse et complété un questionnaire. Une éventuelle corrélation entre récidive de CAA, type d'HPV et status HIV a été recherchée. HPV 6 et 11 sont les virus les plus fréquemment découverts (51% et 28%, respectivement) chez les 140 patients (123H/17F). Trente-cinq (25%) d'entre eux ont présenté une récidive. HPV 11 était present chez 19 (41%) sujets. Ceci est statistiquement significatif (P<0.05), en comparaison aux autres HPVs. Il n'y a par contre pas de différence significative entre la fréquence de récidive des 33 (24%) patients HIV-positifs et le reste du collectif. HPV 11 est donc associé à un taux de récidive de CAA significativement élevé. Un suivi strict des patients atteints est nécessaire pour identifier une récidive et la traiter sans délai, notamment lorsque HPV 11 est present. Ces résultats innovateurs soulèvent la question de la nécessité de pratiquer une typisation virale systématique sur les lésions excisées. La justification d'une telle attitude demande toutefois encore d'être confirmée.

Comparison of Methods for Evaluation of the Bactericidal Activity of Copper-Sputtered Surfaces against Methicillin-Resistant Staphylococcus aureus.

Bacteria can survive on hospital textiles and surfaces, from which they can be disseminated, representing a source of health care-associated infections (HCAIs). Surfaces containing copper (Cu), which is known for its bactericidal properties, could be an efficient way to lower the burden of potential pathogens. The antimicrobial activity of Cu-sputtered polyester surfaces, obtained by direct-current magnetron sputtering (DCMS), against methicillin-resistant Staphylococcus aureus (MRSA) was tested. The Cu-polyester microstructure was characterized by high-resolution transmission electron microscopy to determine the microstructure of the Cu nanoparticles and by profilometry to assess the thickness of the layers. Sputtering at 300 mA for 160 s led to a Cu film thickness of 20 nm (100 Cu layers) containing 0.209% (wt/wt) polyester. The viability of MRSA strain ATCC 43300 on Cu-sputtered polyester was evaluated by four methods: (i) mechanical detachment, (ii) microcalorimetry, (iii) direct transfer onto plates, and (iv) stereomicroscopy. The low efficacy of mechanical detachment impeded bacterial viability estimations. Microcalorimetry provided only semiquantitative results. Direct transfer onto plates and stereomicroscopy seemed to be the most suitable methods to evaluate the bacterial inactivation potential of Cu-sputtered polyester surfaces, since they presented the least experimental bias. Cu-polyester samples sputtered for 160 s by DCMS were further tested against 10 clinical MRSA isolates and showed a high level of bactericidal activity, with a 4-log(10) reduction in the initial MRSA load (10(6) CFU) within 1 h. Cu-sputtered polyester surfaces might be of use to prevent the transmission of HCAI pathogens.

An Assessment of the Microbiology of Hand Contact Surfaces in the Retail Environment

This study aimed to assess the microbiology of food and hand contact surfaces in the retail environment and the potential for these surfaces to act as vehicles for the spread of foodborne pathogens. During the survey, 10 stores in the Republic of Ireland (ROI) were visited by student Environmental Health Officers (EHOs) who took swab samples from four surfaces: conveyor belts, long-life shopping bags, shopping trolley handles and keypads on card payment units. The swab samples were examined for the presence of the pathogens Salmonella, Campylobacter and Listeria. The Aerobic Colony Counts, as well as the levels of E. coli and Enterobacteriaceae, were also determined. In addition, structured questionnaires were used with retailers to establish the stores’ regimes for the cleaning of conveyor belts. Similarly, shoppers donating their long-life shopping bags for sampling were questioned about how they normally use these bags, and the results were compared with those from the microbiological survey. The results indicated that the hygiene of the surfaces sampled was good, with Salmonella, Campylobacter and Listeria not detected in any of the samples, and levels of both Enterobacteriaceae and E. coli were below the limits of detection in all but one sample. Aerobic Colony Counts varied but none of the results obtained would be deemed ‘unacceptable’ or ‘unsatisfactory’ under guidelines for ready-to-eat foods