Extração, caracterização e atividades biológicas de proteínas da espécie cnidoscolus urens (L.) Arthur

The extraction, chemical and structural characterization of a wide variety of compounds derived from plants has been a major source of bioactive molecules. Several proteases have been isolated in the plant kingdom, with numerous pharmacological and biotechnological applications. Among the proteases isolated from plants, are the fibrinogenolytic, with relevant application in the treatment of disorders in the coagulation cascade, in addition to potential use as a tool in clinical laboratories. In this study, in addition to evaluating the effects of the protein extract of Cnidoscolus urens (L.) Arthur (Euphorbiaceae) in the coagulation cascade also investigates the presence of antimicrobial activity and characterizes the proteolytic activity detected in this extract, aiming to determine their potential pharmacological and biotechnological application. In this way, crude protein extracts obtained from the leaves of C. urens in Tris-HCl 0.05M, NaCl 0.15M, pH 7.5, were precipitated in different concentrations of acetone, and assessed for the presence of proteolytic activity in azocaseína and fibrinogen. The most active fraction (F1.0) in these tests was chosen for assessment of biological activity and biochemical characterization. The Aα chain and Bβ of fibrinogen were completely cleaved at a concentration of 0.18 μg/μL of protein fraction in 4 minutes. Fibrinogenolytic activity presented total inhibition in the presence of E-64 and partial in the presence of EDTA. The fraction demonstrated coagulant activity in plasm and reduced the APTT, demonstrating acting on the factors coagulation of the intrinsic pathway and common, not exerting effects on the PT. Fibrinolytic activity on plasma clot was detected only in SDS-PAGE in high concentrations of fraction, and there were no defibrinating. Although several proteases isolated from plants and venomous animals are classically toxic, the fraction F1.0 of C. urens not expressed hemorrhagic nor hemolytic activities. Fraction F1.0 also showed no antimicrobial activity. In proteolytic activity on the azocasein, the optimal pH was 5.0 and optimum temperature of 60ºC. The enzyme activity has been shown to be sensitive to the presence of salts tested, with inhibition for all compounds. The surfactant triton did not influence the enzyme activity, but the tween-20 and SDS inhibited the activity. In the presence of reducing agents increase in enzyme activity occurred, a typical feature of enzymes belonging to the class of cysteine proteases. Several bands with proteolytic activity were detected in zymogram, in the region of high-molecular-weight, which were inhibited by E-64. In this study, we found that C. urens presents in its constitution cysteine proteases with fibrinogenolytic and procoagulant activity, which may be isolated, with potential application in treatment of bleeding disorders, thrombolytic and clinical laboratory

Comparison of DNA-extraction methods and Selective Enrichment broths on the detection of Salmonella Typhimurium in swine feces by polymerase chain reaction (PCR)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Métodos não-invasivos para análises hormonais aplicadas aos estudos de ecologia e etologia

O monitoramento endócrino pela mensuração de metabólitos urinários e fecais de hormônios esteróides tem se mostrado uma alternativa viável na investigação da fisiologia reprodutiva e do estresse em uma grande variedade de aves e mamíferos, domésticos e selvagens. Esta abordagem tem contribuído para uma maior integração da endocrinologia com estudos comportamentais e ecológicos, gerando informações mais detalhadas em diversas áreas tais como bem-estar animal, comportamento social, reprodução, biologia da conservação, biomedicina, entre outros. Todavia, o emprego desta metodologia no Brasil tem sido limitado principalmente à pesquisa de parâmetros reprodutivos e de estresse em espécies selvagens, não havendo até o momento trabalhos publicados utilizando a quantificação urinária ou fecal de glucocorticóides ou esteróides sexuais em animais domésticos. Desta forma, esta palestra tem como objetivo ilustrar alguns exemplos de estudos conduzidos no país envolvendo técnicas de monitoramento endócrino não-invasivo, assim como expor possíveis áreas de aplicação desta ferramenta em pesquisas com espécies domesticas.

Biomassa e extração de nutrientes por plantas de cobertura

With the objective of evaluating the biomass production and nutrient removal by plant cover in the Agreste region of Alagoas, an experiment was conducted in the experimental field of the Federal University of Alagoas - Campus Arapiraca. Randomized block design was used, with eight treatments and four replications. The treatments were: Crotalaria juncea, Crotalaria spectabilis, Cajanus cajan (L.) Mill sp., Cajanus cajan, Canavalia ensiformis, Dolichos lablab, Mucuna aterrima and the spontaneous local vegetation (control). The green matter in an area of 1 m(2) during the flowering of each species was evaluated, and biomass was then dried in an oven at 65 degrees C until constant weight for dry matter, in which the contents of macro and micronutrients were extracted. Leguminous plant showed potential for use as green manure in the Agreste region of Alagoas, with N contents higher than the spontaneous vegetation and not being different from one for the accumulation of P, K, Ca, Mg, S, B, Mn and Zn. The spontaneous vegetation was similar to dry matter of legumes production. Among the treatments Cajanus cajan showed higher dry matter production and N accumulation in the aerial part.

Caracterização física e química de áreas mineradas pela extração de cassiterita

O objetivo deste trabalho foi caracterizar as diferenças ocorridas, após a atividade da mineração de cassiterita, em uma área de floresta amazônica. As amostras foram coletadas, superficialmente, em área de mineração de cassiterita na Floresta Nacional do Jamari (RO), ao longo de uma linha compreendendo: floresta, capoeira, piso de lavra, área de deposição de rejeito seco e área de deposição de rejeito úmido. em cada situação descrita foram coletadas cinco amostras, que serviram como repetição, totalizando 25. Nas amostras coletadas foram realizadas análises físicas e químicas. O processo de extração de cassiterita promoveu alterações significativas nos atributos dos solos estudados. A matéria orgânica, o fósforo disponível, a densidade de partículas e a resistência à penetração foram os mais alterados pelo processo de supressão da vegetação original e extração do minério.

Mapeamento de ambientes estruturados com extração de informações geométricas através de dados sensoriais

The objective of this thesis is proposes a method for a mobile robot to build a hybrid map of an indoor, semi-structured environment. The topological part of this map deals with spatial relationships among rooms and corridors. It is a topology-based map, where the edges of the graph are rooms or corridors, and each link between two distinct edges represents a door. The metric part of the map consists in a set of parameters. These parameters describe a geometric figure which adapts to the free space of the local environment. This figure is calculated by a set of points which sample the boundaries of the local free space. These points are obtained with range sensors and with knowledge about the robot s pose. A method based on generalized Hough transform is applied to this set of points in order to obtain the geomtric figure. The building of the hybrid map is an incremental procedure. It is accomplished while the robot explores the environment. Each room is associated with a metric local map and, consequently, with an edge of the topo-logical map. During the mapping procedure, the robot may use recent metric information of the environment to improve its global or relative pose

Técnicas visuais de localização e mapeamento simultâneos sem extração de primitivas geométricas da imagem

In Simultaneous Localization and Mapping (SLAM - Simultaneous Localization and Mapping), a robot placed in an unknown location in any environment must be able to create a perspective of this environment (a map) and is situated in the same simultaneously, using only information captured by the robot s sensors and control signals known. Recently, driven by the advance of computing power, work in this area have proposed to use video camera as a sensor and it came so Visual SLAM. This has several approaches and the vast majority of them work basically extracting features of the environment, calculating the necessary correspondence and through these estimate the required parameters. This work presented a monocular visual SLAM system that uses direct image registration to calculate the image reprojection error and optimization methods that minimize this error and thus obtain the parameters for the robot pose and map of the environment directly from the pixels of the images. Thus the steps of extracting and matching features are not needed, enabling our system works well in environments where traditional approaches have difficulty. Moreover, when addressing the problem of SLAM as proposed in this work we avoid a very common problem in traditional approaches, known as error propagation. Worrying about the high computational cost of this approach have been tested several types of optimization methods in order to find a good balance between good estimates and processing time. The results presented in this work show the success of this system in different environments

Extração e Representação de Conhecimento de Séries Temporais de Demanda de Energia Elétrica Usando TSKR

The opening of the Brazilian market of electricity and competitiveness between companies in the energy sector make the search for useful information and tools that will assist in decision making activities, increase by the concessionaires. An important source of knowledge for these utilities is the time series of energy demand. The identification of behavior patterns and description of events become important for the planning execution, seeking improvements in service quality and financial benefits. This dissertation presents a methodology based on mining and representation tools of time series, in order to extract knowledge that relate series of electricity demand in various substations connected of a electric utility. The method exploits the relationship of duration, coincidence and partial order of events in multi-dimensionals time series. To represent the knowledge is used the language proposed by Mörchen (2005) called Time Series Knowledge Representation (TSKR). We conducted a case study using time series of energy demand of 8 substations interconnected by a ring system, which feeds the metropolitan area of Goiânia-GO, provided by CELG (Companhia Energética de Goiás), responsible for the service of power distribution in the state of Goiás (Brazil). Using the proposed methodology were extracted three levels of knowledge that describe the behavior of the system studied, representing clearly the system dynamics, becoming a tool to assist planning activities

Estudo do potencial de utilização do resíduo da extração de esmeraldas na fabricação de cerâmica de revestimento

Companies involved in emerald mining and treatment represent an important area of industrial development in Brazil, with significative contribution to the worldwide production of such mineral. As a result, large volumes of emerald waste are constantly generated and abandoned in the environment, negatively contributing to its preservation. By the other side the interest of the use of mining waste as additive in ceramic products has been growing from researchers in recent years. The ceramic industry is constantly seeking to the marked amplification for the sector and perfecting the quality of the products and to increase the variety of applications. The technology of obtaining of ceramic tiles that uses mining residues assists market niches little explored. In this scenario, the objective of the present study was to characterize the residue generated from emerald mining as well as to assess its potential use as raw material for the production of ceramic tiles. Ceramic mixtures were prepared from raw materials characterized by X-ray fluorescence, X-ray diffraction, particle size analysis and thermal analysis. Five compositions were prepared using emerald residue contents of 0%, 10%, 20%, 30% and 40%. Samples were uniaxially pressed, fired at 1000, 1100 and 1200ºC and characterized aiming at establishing their mineralogical composition, water absorption, apparent porosity, specific mass, linear retraction and modulus of rupture. The results shows that the emerald residue, basically consisted of 73% of (SiO2 + Al2O3) and 17,77% of (MgO + Na2O+ K2O) (that facilitates sintering), can be added to the ceramic tile materials with no detrimental effect on the properties of the sintered products

Extração e exportação de nutrientes em cultivares de batata: II - micronutrientes

Cultivares de batata mais produtivas possivelmente exigem maior quantidade de micronutrientes, porém no Brasil há carência de informações sobre extração e exportação de micronutrientes pelas principais cultivares de batata utilizadas. O objetivo deste trabalho foi avaliar a produtividade de tubérculos, a extração e a exportação de micronutrientes nas cultivares de batata Ágata, Asterix, Atlantic, Markies e Mondial. O experimento foi conduzido durante a safra de inverno, em um Latossolo Vermelho, no município de Itaí (SP). As parcelas foram constituídas pelas cinco cultivares, e as subparcelas, por épocas de coletas, realizadas no momento do plantio e a cada sete dias após a emergência. As cultivares Mondial e Asterix, mais produtivas, apresentaram maior extração de micronutrientes, com quantidades médias por hectare de 71 g de B, 122 g de Cu, 2.228 g de Fe, 618 g de Mn e 405 g de Zn. As menores quantidades extraídas foram observadas na cultivar Atlantic, com valores de 50, 81, 1.960, 544 e 270 g ha-1 de B, Cu, Fe, Mn e Zn, respectivamente. A fase de maior demanda por B ocorre logo após o início da formação de tubérculos, aos 34 DAP, enquanto a maior demanda por Fe e Mn inicia-se a partir dos 42 DAP e vai até 63 DAP. O Cu e o Zn são absorvidos em maiores proporções a partir dos 64 DAP até o final do ciclo. A quantidade de B, Cu, Mn e Zn exportada foi dependente da cultivar, com valores por hectare variando de 48 a 22 g de B, 79 a 16 g de Cu, 65 a 37 g de Mn e 167 a 83 g de Zn. A quantidade de Fe exportada não variou entre as cultivares, sendo, em média, de 243 g ha-1. A quantidade de micronutrientes extraída e exportada pela batateira variou com as cultivares utilizadas, indicando necessidade de manejo diferencial da adubação.

Método rápido de extração de DNA de bactérias

Desenvolveu-se um método rápido para extração de DNA de bactérias, que ao contrário de outros métodos, não requer o uso de enzimas, como lisozima e proteinase K, previamente, utilizado-se o carbonato de silício (carborundum) como agente físico para efetuar a quebrar da parede celular da bactéria. Com este método conseguiu-se extrair DNA bacteriano num menor tempo, além de mais rápido, ele mostrou-se mais simples e econômico, quando comparado aos métodos convencionais. O DNA obtido pode ser utilizado para diversas finalidades relacionadas ao DNA de bactérias, obtendo-se uma quantidade razoável de DNA, que varia de 725 µg/mL a 1170 µg/mL por cada 0,1 g de célula bacteriana, com ótima qualidade.

Extração do óleo e caracterização dos resíduos da borra de petróleo para fins de reuso

The petroleum industry, in consequence of an intense activity of exploration and production, is responsible by great part of the generation of residues, which are considered toxic and pollutants to the environment. Among these, the oil sludge is found produced during the production, transportation and refine phases. This work had the purpose to develop a process to recovery the oil present in oil sludge, in order to use the recovered oil as fuel or return it to the refining plant. From the preliminary tests, were identified the most important independent variables, like: temperature, contact time, solvents and acid volumes. Initially, a series of parameters to characterize the oil sludge was determined to characterize its. A special extractor was projected to work with oily waste. Two experimental designs were applied: fractional factorial and Doehlert. The tests were carried out in batch process to the conditions of the experimental designs applied. The efficiency obtained in the oil extraction process was 70%, in average. Oil sludge is composed of 36,2% of oil, 16,8% of ash, 40% of water and 7% of volatile constituents. However, the statistical analysis showed that the quadratic model was not well fitted to the process with a relative low determination coefficient (60,6%). This occurred due to the complexity of the oil sludge. To obtain a model able to represent the experiments, the mathematical model was used, the so called artificial neural networks (RNA), which was generated, initially, with 2, 4, 5, 6, 7 and 8 neurons in the hidden layer, 64 experimental results and 10000 presentations (interactions). Lesser dispersions were verified between the experimental and calculated values using 4 neurons, regarding the proportion of experimental points and estimated parameters. The analysis of the average deviations of the test divided by the respective training showed up that 2150 presentations resulted in the best value parameters. For the new model, the determination coefficient was 87,5%, which is quite satisfactory for the studied system

Liberação de cálcio e magnésio por cápsulas porosas de porcelana usadas na extração de solução do solo

O uso de cápsulas porosas para extração de solução do solo é interessante por ser um ensaio não-destrutivo. Entretanto, persistem dúvidas sobre a liberação de íons da própria cápsula, que podem contaminar a solução extraída. Foram realizados testes na Faculdade de Ciências Agronômicas/UNESP, Botucatu (SP), com o objetivo de verificar a liberação de Ca e de Mg por cápsulas porosas de porcelana. No primeiro, foram empregados quatro tratamentos: T1 - lavagem das cápsulas com água destilada, forçando sua passagem pelas cápsulas, utilizando uma bomba a vácuo; T2 - lavagem das cápsulas com HCl 0,1 mol L-1, forçando sua passagem pelas cápsulas, utilizando uma bomba a vácuo; T3 - lavagem das cápsulas com água destilada, sem vácuo, e T4 - lavagem das cápsulas com HCl 0,1 mol L-1, sem vácuo, em um tempo de imersão de 24 h (para T3 e T4). No segundo teste, as cápsulas tratadas com HCl 0,1 mol L-1 no primeiro teste foram lavadas com água destilada novamente e deixadas de molho em água destilada e deionizada durante 45 min. Após estes procedimentos, as cápsulas foram imersas em água destilada, tomando-se alícotas desta solução para determinação de pH e dos teores de Ca e Mg após contato com as cápsulas por 0; 0,5; 1,0; 2,0; 4,0 e 24 h. Cada tratamento teve quatro repetições. Não se observou liberação significativa de Ca e Mg das cápsulas porosas para a solução, quando foram preparadas utilizando-se da passagem de HCl 0,1 mol L-1 a vácuo e água destilada, e deixadas, a seguir, em água destilada e deionizada durante 4 h.

Extração e exportação de nutrientes em cultivares de batata: I - macronutrientes

A determinação das quantidades de nutrientes absorvidas durante o ciclo de desenvolvimento é de suma importância para estabelecer as épocas em que esses elementos são mais exigidos e as quantidades corretas que devem ser disponibilizadas à cultura da batata. No entanto, quase não existem essas informações para as principais cultivares utilizadas no Brasil. O objetivo deste trabalho foi avaliar a extração e a exportação de macronutrientes pelas cultivares de batata Ágata, Asterix, Atlantic, Markies e Mondial. O experimento foi conduzido durante a safra de inverno, em um Latossolo Vermelho, no município de Itaí (SP). As parcelas foram constituídas pelas cinco cultivares, e as subparcelas, por épocas de coletas, realizadas no momento do plantio e a cada sete dias após a emergência. As cultivares Mondial e Asterix, mais produtivas, apresentaram maior extração de macronutrientes, com quantidades médias por hectare de 116 kg de N, 18 kg de P, 243 kg de K, 50 kg de Ca e 13 kg de Mg, enquanto as cultivares Ágata, Atlantic e Markies extraíram menor quantidade, com valores médios de 92, 14, 178, 35 e 9 kg ha-1, respectivamente. A maior demanda por macronutrientes pelas cultivares estudadas ocorreu na fase inicial de enchimento dos tubérculos (42 a 70 DAP). A exportação de macronutrientes não esteve diretamente relacionada com a produtividade de tubérculos, já que a cultivar mais produtiva (Mondial) não foi a que exportou a maior quantidade de macronutrientes. A cultivar Asterix exportou maior quantidade de N, P, K e Mg, com valores de 88, 15, 220 e 8 kg ha-1, respectivamente, enquanto a menor exportação foi observada na cultivar Atlantic, com 48 kg ha-1 de N, 10 kg ha-1 de P, 143 kg ha-1 de K e 5 kg ha-1 de Mg. A variação entre as cultivares na extração, especialmente de K e N, indica necessidade de manejo diferencial da adubação.

Extração do óleo essencial de Cymbopogom winterianus J. com CO2 pressurizado

The extraction with pressurized fluids has become an attractive process for the extraction of essential oils, mainly due the specific characteristics of the fluids near the critical region. This work presents results of the extraction process of the essential oil of Cymbopogon winterianus J. with CO2 under high pressures. The effect of the following variables was evaluated: solvent flow rate (from 0.37 to 1.5 g CO2/min), pressure (66.7 and 75 bar) and temperature (8, 10, 15, 20 and 25 ºC) on the extraction kinetics and the total yield of the process, as well as in the solubility and composition of the C. winterianus essential oil. The experimental apparatus consisted of an extractor of fixed bed and the dynamic method was adopted for the calculation of the oil solubility. Extractions were also accomplished by conventional techniques (steam and organic solvent extraction). The determination and identification of extract composition were done by gas chromatography coupled with a mass spectrometer (GC-MS). The extract composition varied in function of the studied operational conditions and also related to the used extraction method. The main components obtained in the CO2 extraction were elemol, geraniol, citronellol and citronellal. For the steam extraction were the citronellal, citronellol and geraniol and for the organic solvent extraction were the azulene and the hexadecane. The most yield values (2.76%) and oil solubility (2.49x10-2 g oil/ g CO2) were obtained through the CO2 extraction in the operational conditions of T = 10°C, P = 66.7 bar and solvent flow rate 0.85 g CO2/min