965 resultados para End-user enrichments
Resumo:
Tietoliikenteen suuria linjoja ovat mm. siirtonopeuksien kasvu, IP-tekniikan yleistyminen ja Internet-liitäntöjen kautta käytettävien palvelujen valtaisa lisääntyminen. Kotien verkkoliitännöissä eräänä haasteena on vielä tarjota kohtuullisilla kustannuksilla suuri liikennöintikapasiteetti, mikä voidaan tehdä usealla eri tavalla. Kotien laajakaistaiseen tulevaisuuteen johtaakin useita polkuja, joita tässä diplomityössä on kartoitettu. Työssä on esitelty erilaisia kotitalouksiin soveltuvia nopeita langallisia ja langattomia liitäntätekniikoita. Painopiste on nykyisessä valtavirrassa, kuparikaapelia käyttävässä xDSL-tekniikkaperheessä ja niihin pohjautuvissa verkoissa mukaan lukien ATM-pohjaiset runkoverkot Käytännön liitäntöjen laatua ja toimivuutta on selvitetty mittaamalla perinteistä ADSL-liitäntää sekä uudempaa tekniikkaa edustavaa SHDSL-liitäntää. Liittymiä mitattiin sekä xDSL-mittarilla että spektrianalysaattorilla. Mittauksissa kiinnitettiin huomiota kupariparien toimintaan, kuormituksen ja häiriöiden vaikutukseen sekä liittymän toimintaan käyttäjän kannalta. Mittauksissa todettiin, että kuparikaapeli sietää hyvin häiriöitä myös uusien tekniikoiden käytössä. Tulevaisuutta kartoitettiin haastattelututkimuksella, josta työhön on koostettu operaattoreiden, konsulttien ja käyttäjien näkemyksiä laajakaistaliitäntöjen ja niiden kautta saatavien palveluiden kehittymisestä. Tehty tutkimus osoittaa, että ADSL-tekniikka hyödyntää hyvin sille varattuja taajuusalueita. SHDSL-tekniikassa voidaan lähettää ja vastaanottaa suuria datamääriä molempiin suuntiin.
Resumo:
The subject of this master’s thesis was developing a context-based reminder service for mobile devices. Possible sources of context were identified and analyzed. One such source is geographical location obtained via a GPS receiver. These receivers consume a lot of power and techniques and algorithms for reducing power consumptions were proposed and analyzed. The service was implemented as an application on a series 60 mobile phone. The application requirements, user interface and architecture are presented. The end-user experiences are discussed and possible future development and research areas are presented.
Resumo:
Työn tavoitteena oli selvittää uudenlaisen WLAN-verkkoyhteyden tarjoajan liiketoiminnallisia mahdollisuuksia ja -edellytyksiä. Uudenlaisessa mallissa loppukäyttäjällä on langatonta lähiverkkoa käyttäessään mahdollisuus valita mieleisensä Internet-operaattori sekä käyttää paikallisia palveluja ilman Internet-yhteyttä, alueverkon kautta. Lisaksi tutkittiin langattoman tiedonsiirron markkinointia. Työn case-osuudessa tutkittiin Lappeen¬rannan teknillisen korkeakoulun WLAN-hanketta, ja siinä rakennettua access-verkkoa. Koko langattoman tiedonsiirron liiketoimintakenttä on vasta hakemassa lopullisia muotojaan. Nopeasta yleistymisestä huolimatta WLAN:in massamarkkinoille tuloa hidastavat tietyt ongelmat, mm. verkkovierailut (sekä WLAN-verkkojen että eri langattomien tiedonsiirtoteknologioiden välillä), epäselvät laskutusmallit sekä yhteensopivuusongelmat. Tietoturva on WLAN:in ongelmista kuuluisin, mutta ei suurin este todellisten massamarkkinoiden saavuttamisessa. Hyödyntämällä teknologian omaksujaryhmien erilaisia piirteitä saadaan etua tavoiteltaessa massamarkkinoita. Case-verkon liiketoimintasuunnitelmasta käy ilmi, että mikäli WLAN yleistyy, kuten on odotettu, esitetty uudenlainen alueellinen liiketoimintamalli voi olla taloudellisesti mahdollinen. Esitetyt riskit ja oletukset on huomioitava alan epävarman kehityksen takia.
Resumo:
WAP tulee olemaan tulevaisuudessa tärkeässä roolissa, kun etsitään sopivaa tiedonsiirtoprotokollaa uusille mobiilipalveluille. Vaikka WAP jollain tavalla epäonnistui ensimmäisessä tulemisessaan sen suosio varmasti tulevaisuudessa tulee kasvamaan. WAP:in heikko suosio ei johtunut niinkään protokollan tiedonsiirto ominaisuuksista, vaan WAP-palveluiden kehittymättömyydestä. Tulevaisuuden palvelut kuitenkin ovat kehittyneempiä ja WAP:in suosio tulee kasvamaan. Viimeisimpänä WAP:ia käyttävänä palveluna on esitelty MMS. Kun uudet WAP:iin pohjautuvat palvelut yleistyvät, asettaa se uusia vaatimuksia myös WAP gateway:lle. Työssä tarkastellaan erilaisia mahdollisuuksia mitata mobiilisti WAP palvelujen palvelun tasoa. Työssä myös toteutetaan mobiili WAP palveluiden mittauskomponentti, joka toimii osana laajempaa ohjelmistoa. Tarkoituksena on toteuttaa mittauskomponentti, joka emuloi mahdollisimman hyvin todellista loppukäyttäjää.
Resumo:
Työn tavoitteena oli esittää tuoreen sahatavaran mittahajonnan merkitys sahaukselle. Lisäksi tutkittiin eri vuodenaikojen vaikutusta märkämitan hajontaan. Tutkimuksessa selvitettiin myös sahatavaran kuivauksen aikaisen kutistuman suuruutta ja hajontaa eri tilanteissa. Tutkimuksessa suoritettiin mittauksia kolmella eri sahalla n. 12 kk:n ajan. Näin saatiin tietoa eri vuodenaikojen vaikutuksesta märkämittojen hajontaan, ja sitä kautta sahauksen kannattavuuteen. Kuivauksen vaikutusta tuoremittojen ohjaukseen tutkittiin mittaamalla useita eri koe-eriä ennen ja jälkeen kuivauksen. Mittaustietojen avulla pystytään määrittämään todellinen tarvittava märkämitta, ja vältetään turhaa ylimittaa sahauksessa Tutkimus osoitti vuodenaikojen selvän merkityksen sahaushajontaan. Kuivauksen vaikutuksesta kappaleiden hajontaan saatiin tutkimuspohjaista, tarkkaa tietoa. Myös todellisesta kuivauskutistuman suuruudesta saatiin selkeä käsitys, joka helpottaa märkämitan, ja siten myös asiakkaalle menevän, todellisen sahatavaramitan määrittelyä.
Resumo:
Taking the maximum advantage of technological innovations and the investment in them is of key importance for businesses. The IT industry offers a wide range of innovative high-technology solutions to manage information processing and distribution. However for end-user businesses to make informed decisions in this area is challenging. The aim of this research is to identify the key differences in principal solutions, and what the selection criteria should be for those involved. Existing methodologies for software development are classified, and some key criteria are described to help IT system developers and users determine what are the most important factors in system selection, development and deployment. Statistical data is researched and analysed, a theoretical basis is developed and reviewed, key issues from case studies are identified and generalized to be presented along with the conclusions in the current study. The results give a good basis for corporate consideration and provide overall support to the key decisions in developing web-based software. The conclusion is that new web developments should be considered the stakeholders as an evolution of existing business systems, but they should then pay particular attention to the new advantages that web-based software offers in terms of standardised interfaces and procedures, universal deployment opportunities, and a range of other benefits the study highlights.
Resumo:
Työn tavoitteena oli kehittää uuteen integroituun tietojärjestelmään luotettava raportti, joka korvaa olemassaolevan inventaariraportin sekä taulukkolaskentaohjelmassa manuaalisesti tehtävän varaston arvostuksen. Tutkimuksen taustalla on Stora Enson Imatran tehtaille perustettu inventaariraportin kehittämisprojekti. Tutkimus on vahvasti empiriaan pohjautuva tapaustutkimus ja se seuraa toiminta-analyyttista tutkimusotetta. Työssä keskityttiin tarkastelemaan integroituja tietojärjestelmiä ja tietovarastoja sekä tähän ympäristöön luotavaa raportin kehittämisprosessia. Työssä huomioitiin käyttäjänäkökulma ja analysoitiin erityisesti raportin luotettavuutta varmistava testausvaihe. Kehittämistyön tuloksena Fenixin inventaariraportoinnin alle muodostui kolme erillistä raporttia: inventaariraportti valinnan mukaan, joka voidaan ajaa määrittäin tai arvoittain, inventaarin hinnoitteluraportti sekä inventaarikorjausraportti. Naista inventaarimääräraportti tulee korvaamaan vanhan inventaariraportin ja yhdessä näiden raporttien avulla saavutetaan työlle asetetut tavoitteet.
Resumo:
Tämän tutkimuksen tarkoitus oli luoda projektimalli kansainvälisen organisaation tarpeisiin toiminnanohjausjärjestelmäprojektien läpivientiin. Tavoitteena oli selvittää yrityksen johdon, projektipäällikön ja loppukäyttäjien roolien vaikutus projektin menestykseen. Tutkimuksessa keskitytään erityisesti toiminnanohjausjärjestelmän käyttöönottoon. Teoriaosassa käydään läpi projektien hallinta sekä perehdytään toiminnanohjausjärjestelmäprojekteihin. Lisäksi selvitetään loppukäyttäjien roolin vaikutus toiminnanohjausjärjestelmäprojekteihin. Käytännon osuudessa esitellään projektimalli toiminnanohjausjärjestelmän implementointiin. Tutkija osallistui itse projekteihin joissa hänellä oli suorittava rooli. Tutkimuksen kohdeyritys oli suuri kansainvälinen teollisuusyritys. Yrityksen johto, projektipäällikkö ja loppukäyttäjät osoittautuivat toiminnanohjausjärjestelmäprojektin toteutuksen ja menestyksen kannalta selvästi tärkeimmiksi tekijöiksi ja ovat vahvasti kytköksissä toisiinsa. Erityisesti ylimmän johdon tuki on yksittäisten menestystekijöiden mahdollistaja. Projektin aikana ja varsinkin sen jälkeen loppukäyttäjien rooli sekä heidän vaikutuksensa liiketoiminnan kehittämiseen on merkittävä.
Resumo:
Tämän työn tavoitteena oli tarkastella energiansiirtoketjun kokonaisenergiatehokkuutta, alkaen polttoaineesta ja päättyen sähköenergian loppukäyttäjään. Tarkasteltava energiansiirtoketju alkaa polttoaineen tuotannosta ja siirrosta. Tämän jälkeen tulee sähköenergian tuottaminen, siirtäminen, jakelu ja loppukäyttö. Sähköntuotannon osalta tarkasteltiin myös vesivoimaa ja tuulivoimaa, jolloin energiansiirtoketjusta jää polttoaineen tuotannon ja siirron häviöt pois. Työn pääpaino kohdistui sähköenergian tuotannon, siirron, jakelun ja loppukäytön energiatehokkuuksien tarkastelemiseen. Työssä selvitettiin myös tulevaisuuden näkymiä, miten hyötysuhteita saataisiin parannettua eri osa-alueilla uusilla tekniikoilla ja käyttötottumuksilla. Loppukäyttäjä saa polttoaineen energiasta hyödyksi noin neljänneksen. Suurimmat häviöt syntyvät sähköenergian tuotannossa, lukuun ottamatta vesivoimalaitoksia, joiden hyötysuhde on erittäin korkea.
Resumo:
Internet publication will radically alter how chemists will publish their research in the next century. In this article, we describe two fundamental changes: enhanced chemical publication which allows chemists to publish materials that cannot be published on paper and end-user customization which allows readers to read articles prepared to meet their specifications. These concepts have been implemented within the Internet Journal of Chemistry, a new journal designed to employ the latest technologies for chemical publications.
Resumo:
The purpose of this dissertation is to analyse older consumers' adoption of information and communication technology innovations, assess the effect of aging related characteristic, and evaluate older consumers' willingness to apply these technologies in health care services. This topic is considered important, because the population in Finland (as in other welfare states) is aging and thus offers a possibility for marketers, but on the other hand threatens society with increasing costs for healthcare. Innovation adoption has been under research from several aspects in both organizational and consumer research. In the consumer behaviour, several theories have been developed to predict consumer responses to innovation. The present dissertation carefully reviews previous research and takes a closer look at the theory of planned behaviour, technology acceptance model and diffusion of innovations perspective. It is here suggested that there is a possibility that these theories can be combined and complemented to predict the adoption of ICT innovations among aging consumers, taking the aging related personal characteristics into account. In fact, there are very few studies that have concentrated on aging consumers in the innovation research, and thus there was a clear indent for the present research. ICT in the health care context has been studied mainly from the organizational point of view. If the technology is thus applied for the communication between the individual end-user and service provider, the end-user cannot be shrugged off. The present dissertation uses empirical evidence from a survey targeted to 55-79 year old people from one city in Southern-Carelia. The empirical analysis of the research model was mainly based on structural equation modelling that has been found very useful on estimating causal relationships. The tested models were targeted to predict the adoption stage of personal computers and mobile phones, and the adoption intention of future health services that apply these devices for communication. The present dissertation succeeded in modelling the adoption behaviour of mobile phones and PCs as well as adoption intentions of future services. Perceived health status and three components behind it (depression, functional ability, and cognitive ability) were found to influence perception of technology anxiety. Better health leads to less anxiety. The effect of age was assessed as a control variable, in order to evaluate its effect compared to health characteristics. Age influenced technology perceptions, but to lesser extent compared to health. The analyses suggest that the major determinant for current technology adoption is perceived behavioural control, and additionally technology anxiety that indirectly inhibit adoption through perceived control. When focusing on future service intentions, the key issue is perceived usefulness that needs to be highlighted when new services are launched. Besides usefulness, the perception of online service reliability is important and affects the intentions indirectly. To conclude older consumers' adoption behaviour is influenced by health status and age, but also by the perceptions of anxiety and behavioural control. On the other hand, launching new types of health services for aging consumers is possible after the service is perceived reliable and useful.
Resumo:
This thesis considers aspects related to the design and standardisation of transmission systems for wireless broadcasting, comprising terrestrial and mobile reception. The purpose is to identify which factors influence the technical decisions and what issues could be better considered in the design process in order to assess different use cases, service scenarios and end-user quality. Further, the necessity of cross-layer optimisation for efficient data transmission is emphasised and means to take this into consideration are suggested. The work is mainly related terrestrial and mobile digital video broadcasting systems but many of the findings can be generalised also to other transmission systems and design processes. The work has led to three main conclusions. First, it is discovered that there are no sufficiently accurate error criteria for measuring the subjective perceived audiovisual quality that could be utilised in transmission system design. Means for designing new error criteria for mobile TV (television) services are suggested and similar work related to other services is recommended. Second, it is suggested that in addition to commercial requirements there should be technical requirements setting the frame work for the design process of a new transmission system. The technical requirements should include the assessed reception conditions, technical quality of service and service functionalities. Reception conditions comprise radio channel models, receiver types and antenna types. Technical quality of service consists of bandwidth, timeliness and reliability. Of these, the thesis focuses on radio channel models and errorcriteria (reliability) as two of the most important design challenges and provides means to optimise transmission parameters based on these. Third, the thesis argues that the most favourable development for wireless broadcasting would be a single system suitable for all scenarios of wireless broadcasting. It is claimed that there are no major technical obstacles to achieve this and that the recently published second generation digital terrestrial television broadcasting system provides a good basis. The challenges and opportunities of a universal wireless broadcasting system are discussed mainly from technical but briefly also from commercial and regulatory aspect
Resumo:
The aim of the study was to ford out the availability of biomasses, which are available for energy production, in Poland. Biomasses which were examined were forest residues and surplus straw. Availability was examined by 16 Polish voivodeships, which are provinces in Poland. After fording out the amounts of biomasses for energy production was examined the need of biomass in the biggest CHP plants in Poland. It was expected that all the plants uses 15 % of biomass as the fuel. In the first parts of the report are explained the legislation which effects to biomass use in energy production in EU level and in Polish level. Also the combustion methods best for biomasses are explained by examples. After this, is studied the general situation of renewable energy use in Poland and the facts about the country. In the last parts it's explained the calculations and is shown the example cases. When it was found out the needs and supply of biomass it was examined by examples how it could be transported to the plants from the producers. Also was examined costs effected, if there were logistical terminals between the producer and the end user. The estimation was done by setting prices for the biomass, and fording out average costs for producing and transporting biomass. There are a lot of surplus biomasses in Poland which could be used for energy production, and this is a one way to reach the goals that EU has set of renewable energies. But because biomasses doesn't have such a good calorific value, it isn't worth able to transport it very long distances. In the research was set the prices for producer 9€/MWh and for end user 15€/MWh, the maximum transportation distance for forest residues was 52 km and for straw 56 km. These are example estimations and it has to be remembered that there are a lot of factors that makes inaccurate. The model is really sensitive and by changing one parameter the results change a lot.
Resumo:
Wavelength division multiplexing (WDM) networks have been adopted as a near-future solution for the broadband Internet. In previous work we proposed a new architecture, named enhanced grooming (G+), that extends the capabilities of traditional optical routes (lightpaths). In this paper, we compare the operational expenditures incurred by routing a set of demands using lightpaths with that of lighttours. The comparison is done by solving an integer linear programming (ILP) problem based on a path formulation. Results show that, under the assumption of single-hop routing, almost 15% of the operational cost can be reduced with our architecture. In multi-hop routing the operation cost is reduced in 7.1% and at the same time the ratio of operational cost to number of optical-electro-optical conversions is reduced for our architecture. This means that ISPs could provide the same satisfaction in terms of delay to the end-user with a lower investment in the network architecture
Resumo:
Problems in the mobile services are complex where the lack of the user analysis is not the modest issue. User centered design has increasingly become as a basis for the design of mobile services. The concept of user centered design gives end-user extensive attention at each stage of the design process. Mobile service providers want to offer experiences for users and clearly the users look for services that can provide pleasant experiences. In this thesis, the elements of user experience in mobile internet were studied as well as user experience measuring methods were researched. This study was looking for user experience measuring metrics and methods to specify new factors to measure user experience. During this thesis research project an application called CEM4Mobile was designed and implemented. CEM4Mobile is an application for observing and analysing user experience based on the user activity and behaviour. As a result of this thesis, a collection of user experience elements and measuring metrics were found. The elements and metrics were designed and implemented to CEM4Mobile product, which measures user experience. It was found out that the user experience measuring methods were based on interaction between two people but CEM4Mobile makes user observation programmatic.