Optimal design for active damping in sandwich structures using the Direct MultiSearch method

This paper addresses the problem of optimal positioning of surface bonded piezoelectric patches in sandwich plates with viscoelastic core and laminated face layers. The objective is to maximize a set of modal loss factors for a given frequency range using multiobjective topology optimization. Active damping is introduced through co-located negative velocity feedback control. The multiobjective topology optimization problem is solved using the Direct MultiSearch Method. An application to a simply supported sandwich plate is presented with results for the maximization of the first six modal loss factors. The influence of the finite element mesh is analyzed and the results are, to some extent, compared with those obtained using alternative single objective optimization.

Optimization process of polyester polymer mortars modified with recycled GFRP waste aggregates – application of factorial experiment design-

Glass fibre-reinforced plastics (GFRP), nowadays commonly used in the construction, transportation and automobile sectors, have been considered inherently difficult to recycle due to both: cross-linked nature of thermoset resins, which cannot be remolded, and complex composition of the composite itself, which includes glass fibres, matrix and different types of inorganic fillers. Presently, most of the GFRP waste is landfilled leading to negative environmental impacts and supplementary added costs. With an increasing awareness of environmental matters and the subsequent desire to save resources, recycling would convert an expensive waste disposal into a profitable reusable material. There are several methods to recycle GFR thermostable materials: (a) incineration, with partial energy recovery due to the heat generated during organic part combustion; (b) thermal and/or chemical recycling, such as solvolysis, pyrolisis and similar thermal decomposition processes, with glass fibre recovering; and (c) mechanical recycling or size reduction, in which the material is subjected to a milling process in order to obtain a specific grain size that makes the material suitable as reinforcement in new formulations. This last method has important advantages over the previous ones: there is no atmospheric pollution by gas emission, a much simpler equipment is required as compared with ovens necessary for thermal recycling processes, and does not require the use of chemical solvents with subsequent environmental impacts. In this study the effect of incorporation of recycled GFRP waste materials, obtained by means of milling processes, on mechanical behavior of polyester polymer mortars was assessed. For this purpose, different contents of recycled GFRP waste materials, with distinct size gradings, were incorporated into polyester polymer mortars as sand aggregates and filler replacements. The effect of GFRP waste treatment with silane coupling agent was also assessed. Design of experiments and data treatment were accomplish by means of factorial design and analysis of variance ANOVA. The use of factorial experiment design, instead of the one factor at-a-time method is efficient at allowing the evaluation of the effects and possible interactions of the different material factors involved. Experimental results were promising toward the recyclability of GFRP waste materials as polymer mortar aggregates, without significant loss of mechanical properties with regard to non-modified polymer mortars.

Schistosomiasis mansoni in an area of low transmission: II. Risk factors for infection

Risk factors for Schistosoma mansoni infection were identified using a 1:1 matched case-control design. The work was conducted in the municipality of Pedro de Toledo, São Paulo State, Brazil, an area where the snail host is Biomphalaria tenagophila. Information on water contact patterns, knowledge, attitudes and pratices (kap), socioeconomic and sanitary conditions were obtained by mean of questionnaires. The crude odds ratio estimates and the adjusted odds ratio estimates using the logistic regression model are presented. Most of the examined individuals admitted recent water contacts (90.6% of the cases). The most frequent reason for contact was swimming, playing and fishing and the preferential site of contact was the river. According to the logistic regression technique, the main risk factors for infection were: a) water contact through swimming, playing and fishing; b) fording; c) bad hygiene. We concluded that recreational activities are the main reasons for schistosomiasis transmission in Pedro de Toledo and leisure alternatives should be offered to the local population.

The influence of task design on upper limb muscles fatigue during low-load repetitive work: A systematic review

Ergonomic interventions such as increased scheduled breaks or job rotation have been proposed to reduce upper limb muscle fatigue in repetitive low-load work. This review was performed to summarize and analyze the studies investigating the effect of job rotation and work-rest schemes, as well as, work pace, cycle time and duty cycle, on upper limb muscle fatigue. The effects of these work organization factors on subjective fatigue or discomfort were also analyzed. This review was based on relevant articles published in PubMed, Scopus and Web of Science. The studies included in this review were performed in humans and assessed muscle fatigue in upper limbs. 14 articles were included in the systematic review. Few studies were performed in a real work environment and the most common methods used to assess muscle fatigue were surface electromyography (EMG). No consistent results were found related to the effects of job rotation on muscle activity and subjective measurements of fatigue. Rest breaks had some positive effects, particularly in perceived discomfort. The increase in work pace reveals a higher muscular load in specific muscles. The duration of experiments and characteristics of participants appear to be the factors that most have influenced the results. Future research should be focused on the improvement of the experimental protocols and instrumentation, in order to the outcomes represent adequately the actual working conditions. Relevance to industry: Introducing more physical workload variation in low-load repetitive work is considered an effective ergonomic intervention against muscle fatigue and musculoskeletal disorders in industry. Results will be useful to identify the need of future research, which will eventually lead to the adoption of best industrial work practices according to the workers capabilities.

Protective and risk factors for toxocariasis in children from two different social classes of Brazil

The aim of this study was to analyze the prevalence of Toxocara spp. antibodies in children from two different socioeconomic classes in the Presidente Prudente municipality, São Paulo State, Brazil, and the protective and risk factors associated with toxocariasis. One hundred and twenty-six middle-class (MC) and 126 disadvantaged children (DC) were included in this study. Anti-Toxocara ELISA test was performed in order to evaluate seroprevalence. A survey was applied to the children's guardians/parents in order to analyze the protective and risk factors. The overall prevalence was 11.1%, and of 9.5% (12/126) and 12.7% (16/126) for MC and DC subgroups, respectively. Toxocara seropositivity was inversely proportional to the family income. A high household income was considered a protective factor for toxocariasis in the total population and in both MC and DC subgroups. Being a girl was considered a protective factor for the total population and for both subgroups. Whilst being an owner of cat was a risk factor for children belonging to the total and for both MC and DC subgroups, having dog was considered as a risk factor for only the MC. Epidemiologic protective/factor risks can be distinct depending on the strata of the same population. Thus, it is relevant to evaluate these factors independently for different socioeconomic classes in order to design future investigations and programs for preventing the infection of human beings by Toxocara spp. and other geohelminths.

The design and use of annual budgets to cope with uncertainty

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Finance from the NOVA – School of Business and Economics

User-centered design of the interface prototype of a business intelligence mobile application

Dissertação para obtenção do Grau de Mestre em Engenharia e Gestão Industrial

The evolution of design with concerns on sustainability

This paper aims to analyse the birth and evolution of design with concerns over sustainability, in the context of social and civilizational changes experienced since the industrial revolution, with particular focus since the post-war period and in the context of sustainable development. It will examine several factors that influenced this design approach and that drove its evolution through different stages of maturity and complexity. It will analyse the various forms of design with environmental concerns, as well as the inclusion of other criteria in the context of sustainability, namely social ones. The aim is to settle knowledge that can allow us to draw some lessons to meet the challenges we face today.

Genome-scale metabolic network reconstruction of Polaromonas sp. strain JS666: analysis of cDCE degradation rates and design of experiments for bioremediation improvement

Release of chloroethene compounds into the environment often results in groundwater contamination, which puts people at risk of exposure by drinking contaminated water. cDCE (cis-1,2-dichloroethene) accumulation on subsurface environments is a common environmental problem due to stagnation and partial degradation of other precursor chloroethene species. Polaromonas sp. strain JS666 apparently requires no exotic growth factors to be used as a bioaugmentation agent for aerobic cDCE degradation. Although being the only suitable microorganism found capable of such, further studies are needed for improving the intrinsic bioremediation rates and fully comprehend the metabolic processes involved. In order to do so, a metabolic model, iJS666, was reconstructed from genome annotation and available bibliographic data. FVA (Flux Variability Analysis) and FBA (Flux Balance Analysis) techniques were used to satisfactory validate the predictive capabilities of the iJS666 model. The iJS666 model was able to predict biomass growth for different previously tested conditions, allowed to design key experiments which should be done for further model improvement and, also, produced viable predictions for the use of biostimulant metabolites in the cDCE biodegradation.

Factors that determine the level of care children and adolescents experiencing mental disorders receive

RESUMO: Resumo Uma prestação de serviços de saúde mental para crianças e adolescentes (CAMHS) oportuna, eficaz e baseada na evidência pode evitar incapacidade a longo prazo. No entanto, estes serviços são criticamente sub-financiados em todo o mundo. É um imperativo garantir que este precioso recurso não seja desperdiçado. Os governos e outras partes interessadas relevantes na área da saúde mental precisam de conhecer o estado de saúde mental da população, quais os recursos disponíveis e como melhor utilizar os recursos disponíveis para orientar uma política e decisões efectivas sobre os níveis de serviços. Objetivo: O objetivo deste artigo é explorar o papel da acuidade, gravidade e complexidade na determinação dos cuidados em saúde mental especializados recebidos por crianças e adolescentes que sofrem perturbações mentais. Métodos: Este estudo é exploratório envolvendo uma revisão sistemática da literatura. Foi realizada uma pesquisa com palavras-chave utilizando bases de dados PsychINFO, EMBASE, PubMed e MEDLINE. A literatura cinzenta também foi investigada com um enfoque nas abordagens sistémicas, organizacionais e políticas para a organização e comissionamento de CAMHS. Foram selecionados apenas documentos escritos em Inglês. Três países, Bélgica, Reino Unido e Estados Unidos, todos eles com modelos muito diferentes de organização de CAMHS, foram revistos para investigar de que forma os conceitos de acuidade, gravidade e complexidade foram utilizados na sua concepção de serviços para determinar o nível da assistência prestada. Resultados: Nem a Bélgica, nem o modelo norte-americano de CAMHS organização de serviço parecem estar alinhados com os principais conceitos na determinação do nível de prestação de serviços. O sistema de serviços do Reino Unido de CAMHS está mais estreitamente alinhado com esses conceitos e tem uma alocação de recursos mais equilibrada entre o hospital e a comunidade. O seu ponto fraco está na falta de flexibilidade entre os níveis de serviço e na falta de apoio para com o sector dos cuidados de saúde primários. Conclusões: A variabilidade na alocação de recursos a diferentes níveis especializados de CAMHS (em regime de internamento, ambulatório, e na comunidade) e o modelo diferente de estrutura de serviços entre os países estudados indica uma inconsistência na forma como as crianças e adolescentes que apresentam aos CAMHS são referenciados para os cuidados que recebem. Isto põe em questão se as crianças e adolescentes com perturbações mentais estão a receber o nível e tipo de cuidados concordantes com as suas necessidades. A concepção e o comissionamento de sistemas de CAMHS levam-nos à discussão de uma série de princípios fundamentais que devem ser considerados. O sistema perfeito no entanto, ainda está para ser encontrado. -------------------------------- ABSTRACT: Provision of timely, effective, evidence based mental health services to children and adolescents can prevent long term impairment, but they are critically underfunded across the globe. There is an imperative to ensure this precious resource is not wasted. Governments and other relevant mental health stakeholders need to know the mental health status of the population, what resources are available and how best to use the resources available to guide effective policy and decisions about service levels. Aim: The aim of this paper is to explore the role of acuity, severity and complexity in determining the specialist mental health care that children and adolescents experiencing mental disorders receive. Methods: This study is exploratory involving a systematic scan of the literature. A key word search was conducted using databases PSYCHINFO, EMBASE, PUBMED and MEDLINE. Grey literature was also searched to focus on systemic, organisational and policy approaches to the organisation and commissioning of CAMHS. Only documents written in English were selected. Three countries Belgium, UK and the US all with very different models of service organisation for CAMHS were reviewed to investigate how well the concepts of acuity, severity and complexity were used to determine the level of care delivered in their service design. Findings: Neither the Belgium nor the US model of CAMHS service organisation appear to align with the key concepts driving intensity of level of service provision. The UK CAMHS service system most closely aligns with the concepts. It has a more balanced resource allocation between hospital and community. Its downfall is in its lack of flexibility between service levels and its lack of support for the primary care sector. Conclusions: The variability in resource allocation to different service levels (inpatient, outpatient, community) within specialist CAMHS and the differing model of service structure across countries indicates an inconsistency in how children and adolescents presenting to CAMHS are allocated to the care they receive. This puts into question whether children and adolescent with mental disorders are receiving a level and type of care commensurate with their needs. In commissioning and designing CAMHS systems a number of key principles that should be considered are discussed. The perfect system however, is yet to be found.

The impact of work clothing design on workers’ comfort

Physical and physiological comfort, at work and during leisure time, is important to human health and motivation. A growing number of jobs require workers to sit. Most clothes, except those intended for wheelchair users, were designed for walking or the standing position. Clothing designs should be user-oriented and meet users’ needs. Garment design should conform to body position and posture, not just shape and size. In this paper we present the ergometric impact of a new type of trousers designed to adapt to changes in position. Concentrations of compression forces, temperature and pressure were documented in an exploratory pilot study and contrasted to traditional designs. The new trousers showed significant decreases in compression force concentration, especially in and around the knees and waist. Most participants identified comfort as an important factor when purchasing a pair of trousers and that, for working purposes, they would prefer these special trousers rather than traditional designs.

Design de superfície biomimética para aplicação em atividades desportivas

Tese de Doutoramento Engenharia Têxtil.

Biomimetic supramolecular designs for the controlled release of growth factors in bone regeneration

The extracellular matrix (ECM) of tissues is an assembly of insoluble macromolecules that specifically interact with soluble bioactive molecules and regulate their distribution and availability to cells. Recapitulating this ability has been an important target in controlled growth factor delivery strategies for tissue regeneration and requires the design of multifunctional carriers. This review describes the integration of supramolecular interactions on the design of delivery strategies that encompass self-assembling and engineered affinity components to construct advanced biomimetic carriers for growth factor delivery. Several glycan- and peptide-based self-assemblies reported in the literature are highlighted and commented upon. These examples demonstrate how molecular design and chemistry are successfully employed to create versatile multifunctional molecules which self-assemble/disassemble in a precisely predicted manner, thus controlling compartmentalization, transport and delivery. Finally, we discuss whether recent advances in the design and preparation of supramolecular delivery systems have been sufficient to drive real translation towards a clinical impact. 

Neuroendocrine factors regulate retinoic acid receptors in normal and hypoplastic lung development

Congenital diaphragmatic hernia (CDH) is characterised by a spectrum of lung hypoplasia and consequent pulmonary hypertension, leading to high morbidity and mortality rates. Moreover, CDH has been associated with an increase in the levels of pulmonary neuroendocrine factors, such as bombesin and ghrelin, and a decrease in the action of retinoic acid (RA). The present study aimed to elucidate the interaction between neuroendocrine factors and RA. In vitro analyses were performed on Sprague-Dawley rat embryos. Normal lung explants were treated with bombesin, ghrelin, a bombesin antagonist, a ghrelin antagonist, dimethylsulfoxide (DMSO), RA dissolved in DMSO, bombesin plus RA and ghrelin plus RA. Hypoplastic lung explants (nitrofen model) were cultured with bombesin, ghrelin, bombesin antagonist or ghrelin antagonist. The lung explants were analysed morphometrically, and retinoic acid receptor (RAR) α, β and γ expression levels were assessed via Western blotting. Immunohistochemistry analysis of RAR was performed in normal and hypoplastic lungs 17.5 days post-conception (dpc). Compared with the controls, hypoplastic lungs exhibited significantly higher RARα/γ expression levels. Furthermore considering hypoplastic lungs, bombesin and ghrelin antagonists decreased RARα/γ expression. Normal lung explants (13.5 dpc) treated with RA, bombesin plus RA, ghrelin plus RA, bombesin or ghrelin exhibited increased lung growth. Moreover, bombesin and ghrelin increased RARα/γ expression levels, whereas the bombesin and ghrelin antagonists decreased RARα/γ expression. This study demonstrates for the first time that neuroendocrine factors function as lung growth regulators, sensitising the lung to the action of RA through up-regulation of RARα and RARγ.

Benzodiazepine use and associated factors in elderly in the city of Dourados, MS, Brazil

ABSTRACT Objective The use of benzodiazepines (BZD) and associated factors in the elderly of Dourados, MS, Brazil was investigated. Methods This is a cross-sectional population-based study using a multistage sampling design. Participants were 1,022 individuals aged ≥ 60 years. Measurements socioeconomic status, schooling, demographic aspects, marital status, physical activity, hospitalizations, self-rated health, use of alcohol beverages and smoking were assessed by standard questionnaire. The drugs used were obtained by checking the prescription or package and classified according to the Anatomical Therapeutic Chemical Index. Chi-square test, Chi-square for linear tendency, Fisher's exact test and Poisson regression were used to assess association between variables. Results The prevalence of use of BZD was 6.5% (CI95%: 5.1-8.2%). The oldest group (PR: 1.60 for 70-79 years and PR: 1.79 for ≥ 80 years), non-use of alcohol (PR: 4.14) and use of antidepressants (PR: 8.73) were the statistically associated characteristics. Conclusions The prevalence of use of BZD in the study population was low, similar to findings of more recent Brazilian studies and lower than those obtained in international studies. The prevalence of use of BZD increased with aging and use of antidepressants.