Model-to-Code transformation from product-line architecture models to aspectJ

Software Product Line Engineering has significant advantages in family-based software development. The common and variable structure for all products of a family is defined through a Product-Line Architecture (PLA) that consists of a common set of reusable components and connectors which can be configured to build the different products. The design of PLA requires solutions for capturing such configuration (variability). The Flexible-PLA Model is a solution that supports the specification of external variability of the PLA configuration, as well as internal variability of components. However, a complete support for product-line development requires translating architecture specifications into code. This complex task needs automation to avoid human error. Since Model-Driven Development allows automatic code generation from models, this paper presents a solution to automatically generate AspectJ code from Flexible-PLA models previously configured to derive specific products. This solution is supported by a modeling framework and validated in a software factory.

The Spanish Travel Subjective Lexicon (STSL).

This paper presents a proposal for a recognition model for the appraisal value of sentences. It is based on splitting the text into independent sentences (full stops) and then analysing the appraisal elements contained in each sentence according to the previous value in the appraisal lexicon. In this lexicon, positive words are assigned a positive coefficient (+1) and negative words a negative coefficient (-1). We take into account word such as ?too?, ?little? (when it is not ?a bit?), ?less?, and ?nothing? than can modify the polarity degree of lexical unit when appear in the nearby environment. If any of these elements are present, then the previous coefficient will be multiplied by (-1), that is, they will change their sign. Our results show a nearly theoretical effectiveness of 90%, despite not achieving the recognition (or misrecognition) of implicit elements. These elements represent approximately 4% of the total of sentences analysed for appraisal and include the errors in the recognition of coordinated sentences. On the one hand, we found that 3.6 % of the sentences could not be recognized because they use different connectors than those included in the model; on the other hand, we found that in 8.6% of the sentences despite using some of the described connectors could not be applied the rules we have developed. The percentage relative to the whole group of appraisal sentences in the corpus was approximately of 5%.

Programación y simulación de la comunicación intercelular mediante conjugación en el simulador multicelular GRO

Los conjuntos bacterianos son sistemas dinámicos difíciles de modelar debido a que las bacterias colaboran e intercambian información entre sí. Estos microorganismos procariotas pueden tomar decisiones por mayoría e intercambiar información genética importante que, por ejemplo, las haga resistentes a un antibiótico. El proceso de conjugación consiste en el intercambio de un plásmido de una bacteria con otra, permitiendo así que se transfieran propiedades. Estudios recientes han demostrado que estos plásmidos pueden ser reprogramados artificialmente para que la bacteria que lo contenga realice una función específica [1]. Entre la multitud de aplicaciones que supone esta idea, el proyecto europeo PLASWIRES está intentando demostrar que es posible usar organismos vivos como computadores distribuidos en paralelo y plásmidos como conexión entre ellos mediante conjugación. Por tanto, mediante una correcta programación de un plásmido, se puede conseguir, por ejemplo, hacer que una colonia de bacterias haga la función de un antibiótico o detecte otros plásmidos peligrosos en bacterias virulentas. El proceso experimental para demostrar esta idea puede llegar a ser algo lento y tedioso, por lo que es necesario el uso de simuladores que predigan su comportamiento. Debido a que el proyecto PLASWIRES se basa en la conjugación bacteriana, surge la necesidad de un simulador que reproduzca esta operación. El presente trabajo surge debido a la deficiencia del simulador GRO para reproducir la conjugación. En este documento se detallan las modificaciones necesarias para que GRO pueda representar este proceso, así como analizar los datos obtenidos e intentar ajustar el modelo a los datos obtenidos por el Instituto de Biomedicina y Biotecnología de Cantabria (IBBTEC). ---ABSTRACT---Bacterial colonies are dynamical systems difficult to model because bacteria collaborate and exchange information with each other. These prokaryotic organisms can make decisions by majority and exchange important genetic information, for example, make them resistant to an antibiotic. The conjugation process is the exchange of a plasmid from one bacterium to another, allowing both to have the same properties. Recent studies have shown that these plasmids can be artificially reprogrammed to make the bacteria that contain it to perform a specific function [1]. Among the multitude of applications involved in this idea, the European project PLASWIRES is attempting to prove that it is possible to use living organisms as parallel and distributed computers with plasmids acting as connectors between them through conjugation. Thus, by properly programming a plasmid, you can get a colony of bacteria that work as an antibiotic or detect hazardous plasmids in virulent bacteria. The experimental process to prove this idea can be slow and tedious, so the use of simulators to predict their behavior is required. Since PLASWIRES project is based on bacterial conjugation, a simulator that can reproduce this operation is required. This work arises due to the absence of the conjugation process in the simulator GRO. This document details the changes made to GRO to represent this process, analyze the data and try to adjust the model to the data obtained by the Institute of Biomedicine and Biotechnology of Cantabria ( IBBTEC ). This project has two main objectives, the first is to add the functionality of intercellular communication by conjugation to the simulator GRO, and the second is to use the experimental data obtained by the IBBTEC. To do this, the following points should be followed: • Study of conjugation biology as a mechanism of intercellular communication. • Design and implementation of the algorithm that simulates conjugation. • Experimental validation and model adjust to the experimental data on rates of conjugation and bacterial growth.

Consideraciones sobre el montaje de conectores para optimizar su respuesta en bandas milimétricas

Connectors are essential in many circuits to communicate with exterior world. When working in millimeter wave frequencies, connectors require very tight tolerances and being mounted exactly in the correct way. Main problems which use to appear when working with millimeter wave connectors have been collected in this article. Besides that, some basic guidelines to get optimal connector performance are given. To illustrate how these advices can improve connector operation, they have been used in a real case.

Designer-driven 3D buildings generated using variable neighborhood search

This paper presents a mechanism to generate virtual buildings considering designer constraints and guidelines. This mechanism is implemented as a pipeline of different Variable Neighborhood Search (VNS) optimization processes in which several subproblems are tackled (1) rooms locations, (2) connectivity graph, and (3) element placement. The core VNS algorithm includes some variants to improve its performance, such as, for example constraint handling and biased operator selection. The optimization process uses a toolkit of construction primitives implemented as "smart objects" providing basic elements such as rooms, doors, staircases and other connectors. The paper also shows experimental results of the application of different designer constraints to a wide range of buildings from small houses to a large castle with several underground levels.

Telemetría de vehículos FSAE con microcontrolador PIC32 y transceptor de radio CC1101

Quizás el campo de las telecomunicaciones sea uno de los campos en el que más se ha progresado en este último siglo y medio, con la ayuda de otros campos de la ciencia y la técnica tales como la computación, la física electrónica, y un gran número de disciplinas, que se han utilizado estos últimos 150 años en conjunción para mejorarse unas con la ayuda de otras. Por ejemplo, la química ayuda a comprender y mejorar campos como la medicina, que también a su vez se ve mejorada por los progresos en la electrónica creados por los físicos y químicos, que poseen herramientas más potentes para calcular y simular debido a los progresos computacionales. Otro de los campos que ha sufrido un gran avance en este último siglo es el de la automoción, aunque estancados en el motor de combustión, los vehículos han sufrido enormes cambios debido a la irrupción de los avances en la electrónica del automóvil con multitud de sistemas ya ampliamente integrados en los vehículos actuales. La Formula SAE® o Formula Student es una competición de diseño, organizada por la SAE International (Society of Automotive Engineers) para estudiantes de universidades de todo el mundo que promueve la ingeniería a través de una competición donde los miembros del equipo diseñan, construyen, desarrollan y compiten en un pequeño y potente monoplaza. En el ámbito educativo, evitando el sistema tradicional de clases magistrales, se introducen cambios en las metodologías de enseñanza y surge el proyecto de la Fórmula Student para lograr una mejora en las acciones formativas, que permitan ir incorporando nuevos objetivos y diseñar nuevas situaciones de aprendizaje que supongan una oportunidad para el desarrollo de competencias de los alumnos, mejorar su formación como ingenieros y contrastar sus progresos compitiendo con las mejores universidades del mundo. En este proyecto se pretende dotar a los alumnos de las escuelas de ingeniería de la UPM que desarrollan el vehículo de FSAE de una herramienta de telemetría con la que evaluar y probar comportamiento del vehículo de FSAE junto con sus subsistemas que ellos mismos diseñan, con el objetivo de evaluar el comportamiento, introducir mejoras, analizar resultados de una manera más rápida y cómoda, con el objetivo de poder progresar más rápidamente en su desarrollo, recibiendo y almacenando una realimentación directa e instantánea del funcionamiento mediante la lectura de los datos que circulan por el bus CAN del vehículo. También ofrece la posibilidad de inyectar datos a los sistemas conectados al bus CAN de manera remota. Se engloba en el conjunto de proyectos de la FSAE, más concretamente en los basados en la plataforma PIC32 y propone una solución conjunta con otros proyectos o también por sí sola. Para la ejecución del proyecto se fabricó una placa compuesta de dos placas de circuito impreso, la de la estación base que envía comandos, instrucciones y datos para inyectar en el bus CAN del vehículo mediante radiofrecuencia y la placa que incorpora el vehículo que envía las tramas que circulan por el bus CAN del vehículo con los identificadores deseados, ejecuta los comandos recibidos por radiofrecuencia y salva las tramas CAN en una memoria USB o SD Card. Las dos PCBs constituyen el hardware del proyecto. El software se compone de dos programas. Un programa para la PCB del vehículo que emite los datos a la estación base, codificado en lenguaje C con ayuda del entorno de desarrollo MPLAB de Microchip. El otro programa hecho con LabView para la PCB de la estación base que recibe los datos provenientes del vehículo y los interpreta. Se propone un hardware y una capa o funciones de software para los microcontroladores PIC32 (similar al de otros proyectos del FSAE) para la transmisión de las tramas del bus CAN del vehículo de manera inalámbrica a una estación base, capaz de insertar tramas en el bus CAN del vehículo enviadas desde la estación base. También almacena estas tramas CAN en un dispositivo USB o SD Card situado en el vehículo. Para la transmisión de los datos se hizo un estudio de las frecuencias de transmisión, la legislación aplicable y los tipos de transceptores. Se optó por utilizar la banda de radiofrecuencia de uso común ISM de 433MHz mediante el transceptor integrado CC110L de Texas Instruments altamente configurable y con interfaz SPI. Se adquirieron dos parejas de módulos compatibles, con amplificador de potencia o sin él. LabView controla la estación que recoge las tramas CAN vía RF y está dotada del mismo transceptor de radio junto con un puente de comunicaciones SPI-USB, al que se puede acceder de dos diferentes maneras, mediante librerías dll, o mediante NI-VISA con transferencias RAW-USB. La aplicación desarrollada posee una interfaz configurable por el usuario para la muestra de los futuros sensores o actuadores que se incorporen en el vehículo y es capaz de interpretar las tramas CAN, mostrarlas, gráfica, numéricamente y almacenar esta información, como si fuera el cuadro de instrumentos del vehículo. Existe una limitación de la velocidad global del sistema en forma de cuello de botella que se crea debido a las limitaciones del transceptor CC110L por lo que si no se desea filtrar los datos que se crean necesarios, sería necesario aumentar el número de canales de radio para altas ocupaciones del bus CAN. Debido a la pérdida de relaciones con el INSIA, no se pudo probar de manera real en el propio vehículo, pero se hicieron pruebas satisfactorias (hasta 1,6 km) con una configuración de tramas CAN estándar a una velocidad de transmisión de 1 Mbit/s y un tiempo de bit de 1 microsegundo. El periférico CAN del PIC32 se programará para cumplir con estas especificaciones de la ECU del vehículo, que se presupone que es la MS3 Sport de Bosch, de la que LabView interpretará las tramas CAN recibidas de manera inalámbrica. Para poder probar el sistema, ha sido necesario reutilizar el hardware y adaptar el software del primer prototipo creado, que emite tramas CAN preprogramadas con una latencia también programable y que simulará al bus CAN proporcionando los datos a transmitir por el sistema que incorpora el vehículo. Durante el desarrollo de este proyecto, en las etapas finales, el fabricante del puente de comunicaciones SPI-USB MCP2210 liberó una librería (dll) compatible y sin errores, por lo que se nos ofrecía una oportunidad interesante para la comparación de las velocidades de acceso al transceptor de radio, que se presuponía y se comprobó más eficiente que la solución ya hecha mediante NI-VISA. ABSTRACT. The Formula SAE competition is an international university applied to technological innovation in vehicles racing type formula, in which each team, made up of students, should design, construct and test a prototype each year within certain rules. The challenge of FSAE is that it is an educational project farther away than a master class. The goal of the present project is to make a tool for other students to use it in his projects related to FSAE to test and improve the vehicle, and, the improvements that can be provided by the electronics could be materialized in a victory and win the competition with this competitive advantage. A telemetry system was developed. It sends the data provided by the car’s CAN bus through a radio frequency transceiver and receive commands to execute on the system, it provides by a base station on the ground. Moreover, constant verification in real time of the status of the car or data parameters like the revolutions per minute, pressure from collectors, water temperature, and so on, can be accessed from the base station on the ground, so that, it could be possible to study the behaviour of the vehicle in early phases of the car development. A printed circuit board, composed of two boards, and two software programs in two different languages, have been developed, and built for the project implementation. The software utilized to design the PCB is Orcad10.5/Layout. The base station PCB on a PC receives data from the PCB connected to the vehicle’s CAN bus and sends commands like set CAN filters or masks, activate data logger or inject CAN frames. This PCB is connected to a PC via USB and contains a bridge USB-SPI to communicate with a similar transceiver on the vehicle PCB. LabView controls this part of the system. A special virtual Instrument (VI) had been created in order to add future new elements to the vehicle, is a dashboard, which reads the data passed from the main VI and represents them graphically to studying the behaviour of the car on track. In this special VI other alums can make modifications to accommodate the data provided from the vehicle CAN’s bus to new elements on the vehicle, show or save the CAN frames in the form or format they want. Two methods to access to SPI bus of CC110l RF transceiver over LabView have been developed with minimum changes between them. Access through NI-VISA (Virtual Instrument Software Architecture) which is a standard for configuring, programming, USB interfaces or other devices in National Instruments LabView. And access through DLL (dynamic link library) supplied by the manufacturer of the bridge USB-SPI, Microchip. Then the work is done in two forms, but the dll solution developed shows better behaviour, and increase the speed of the system because has less overload of the USB bus due to a better efficiency of the dll solution versus VISA solution. The PCB connected to the vehicle’s CAN bus receives commands from the base station PCB on a PC, and, acts in function of the command or execute actions like to inject packets into CAN bus or activate data logger. Also sends over RF the CAN frames present on the bus, which can be filtered, to avoid unnecessary radio emissions or overflowing the RF transceiver. This PCB consists of two basic pieces: A microcontroller with 32 bit architecture PIC32MX795F512L from Microchip and the radio transceiver integrated circuit CC110l from Texas Instruments. The PIC32MX795F512L has an integrated CAN and several peripherals like SPI controllers that are utilized to communicate with RF transceiver and SD Card. The USB controller on the PIC32 is utilized to store CAN data on a USB memory, and change notification peripheral is utilized like an external interrupt. Hardware for other peripherals is accessible. The software part of this PCB is coded in C with MPLAB from Microchip, and programming over PICkit 3 Programmer, also from Microchip. Some of his libraries have been modified to work properly with this project and other was created specifically for this project. In the phase for RF selection and design is made a study to clarify the general aspects of regulations for the this project in order to understand it and select the proper band, frequency, and radio transceiver for the activities developed in the project. From the different options available it selects a common use band ICM, with less regulation and free to emit with restrictions and disadvantages like high occupation. The transceiver utilized to transmit and receive the data CC110l is an integrated circuit which needs fewer components from Texas Instruments and it can be accessed through SPI bus. Basically is a state machine which changes his state whit commands received over an SPI bus or internal events. The transceiver has several programmable general purpose Inputs and outputs. These GPIOs are connected to PIC32 change notification input to generate an interrupt or connected to GPIO to MCP2210 USB-SPI bridge to inform to the base station for a packet received. A two pair of modules of CC110l radio module kit from different output power has been purchased which includes an antenna. This is to keep away from fabrication mistakes in RF hardware part or designs, although reference design and gerbers files are available on the webpage of the chip manufacturer. A neck bottle is present on the complete system, because the maximum data rate of CC110l transceiver is a half than CAN bus data rate, hence for high occupation of CAN bus is recommendable to filter the data or add more radio channels, because the buffers can’t sustain this load along the time. Unfortunately, during the development of the project, the relations with the INSIA, who develops the vehicle, was lost, for this reason, will be made impossible to test the final phases of the project like integration on the car, final test of integration, place of the antenna, enclosure of the electronics, connectors selection, etc. To test or evaluate the system, it was necessary to simulate the CAN bus with a hardware to feed the system with entry data. An early hardware prototype was adapted his software to send programed CAN frames at a fixed data rate and certain timing who simulate several levels of occupation of the CAN Bus. This CAN frames emulates the Bosch ECU MS3 Sport.

Red continua de espacios públicos verdes a escala municipal: el caso de Madrid

La ubicación marginal y el aislamiento de los Parques Urbanos implican infrautilización y deterioro de los mismos. Su interconexión mediante una red verde peatonal con limitaciones al tráfico rodado, supone una puesta en valor de todo el sistema de espacios libres y zonas verdes de la ciudad y un importante incentivo para desviar determinados flujos rodados a otras vías cercanas, rescatando así, espacios urbanos a favor del peatón. Esta conexión ayuda a minimizar la fragmentación del espacio urbano, generando nexos de unión, que articulan y estructuran la ciudad. En esta investigación se describe una metodología para localizar y seleccionar conectores entre distintos Parques Urbanos, evaluando su funcionalidad, seguridad, confort y atractivo. Como caso de estudio, se proponen las conexiones entre los Parques Públicos de una entidad determinada, situados en la ciudad de Madrid. Esta metodología es elástica, universal, y dada su sencillez, aplicable por personas no especializadas; estas características la hacen especialmente valiosa, para apoyar la toma de decisiones en los instrumentos de Ordenación del Territorio y en el desarrollo de Planes Específicos encaminados a la mejora de la calidad ambiental y al aumento de la potencialidad peatonal de la ciudad. ABSTRACT The marginal location and the solitary distribution of City Parks are factors that expose these “City Lungs” to be underused and damaged. The City Parks chained by a green pedestrian web with a minimized relevance for engine vehicles, generates an important enhancement for open spaces and green areas of the City, and a crucial incentive for altering the course of vehicle transportation from particular areas to proximate avenues and arteries, resulting in urban spaces being exclusively for pedestrians. This network helps to minimize the fragmentation of the urban space generating nodes of connection that provide a structure to the city. In this investigation a procedure is described for the purpose of identifying and prioritizing green connectors amongst the City Parks, evaluating the functionality, security, comfort, and attractions. For this research paper, it is proposed to establish a green web, which links up the main City Parks of Madrid. This methodology is elastic, universal, and due to its simplicity, can be applicable for non-specialized people of the field: these features make this urban concept a very estimable and valued idea that can be taken into consideration for future urban planning and for the development of specific plans with the object of improving the quality of the environment and lead to an increase of the pedestrian potential within the city.

Improved design for safety belts. Final report.

Mode of access: Internet.

Exploratory study of glowing electrical connections /

"Supersedes NBSIR 76-1011."

Analysis of current technology on electrical connections in residential branch circuit wiring /

Errata sheet at end.

Evaluation of electrical connections for branch circuit wiring /

Item 241-A.

Ultimate strength of continuous composite beams in combined bending and shear

The contributions of the concrete slab and composite action to the vertical shear strength of continuous steel-concrete composite beams are ignored in current design codes, which result in conservative designs. This paper investigates the ultimate strength of continuous composite beams in combined bending and shear by using the finite element analysis method. A three-dimensional finite element model has been developed to account for the geometric and material nonlinear behaviour of continuous composite beams. The finite element model is verified by experimental results and then used to study the effects of the concrete slab and shear connection on the vertical shear strength. The moment-shear interaction strength of continuous composite beams is also investigated by varying the moment/ shear ratio. It is shown that the concrete slab and composite action significantly increase the ultimate strength of continuous composite beams. Based on numerical results, design models are proposed for the vertical shear strength and moment-shear interaction of continuous composite beams. The proposed design models, which incorporates the effects of the concrete slab, composite action, stud pullout failure and web shear buckling, are compared with experimental results with good agreement. (C) 2003 Elsevier Ltd. All rights reserved.

Strength analysis of steel-concrete composite beams in combined bending and shear

Despite experimental evidences, the contributions of the concrete slab and composite action to the vertical shear strength of simply supported steel-concrete composite beams are not considered in current design codes, which lead to conservative designs. In this paper, the finite element method is used to investigate the flexural and shear strengths of simply supported composite beams under combined bending and shear. A three-dimensional finite element model has been developed to account for geometric and material nonlinear behavior of composite beams, and verified by experimental results. The verified finite element model is than employed to quantify the contributions of the concrete slab and composite action to the moment and shear capacities of composite beams. The effect of the degree of shear connection on the vertical shear strength of deep composite beams loaded in shear is studied. Design models for vertical shear strength including contributions from the concrete slab and composite action and for the ultimate moment-shear interaction ate proposed for the design of simply supported composite beams in combined bending and shear. The proposed design models provide a consistent and economical design procedure for simply supported composite beams.

Run-time connector synthesis for autonomic systems of systems

A key objective of autonomic computing is to reduce the cost and expertise required for the management of complex IT systems. As a growing number of these systems are implemented as hierarchies or federations of lower-level systems, techniques that support the development of autonomic systems of systems are required. This article introduces one such technique, which involves the run-time synthesis of autonomic system connectors. These connectors are specified by means of a new type of autonomic computing policy termed a resource definition policy, and enable the dynamic realisation of collections of collaborating autonomic systems, as envisaged by the original vision of autonomic computing. We propose a framework for the formal specification of autonomic computing policies, and use it to define the new policy type and to describe its application to the development of autonomic system of systems. To validate the approach, we present a sample data-centre application that was built using connectors synthesised from resource-definition policies.

The source, cost and prevention of central venous catheter-related infection

Central venous catheters have become an integral part of patient management however they are associated with many complications including infection. Despite efforts being made to reduce the incidence of such infect ions the problem continues to increase and has resource implications for the Health Service. Studies relating to the source of microorganisms causing CVC-associated infection, the cost of such infections and the efficacy of an antimicrobial catheter have been undertaken. Thirty patients who required a CVC as part of their medical management and underwent cardiac surgery had the distal tips of their catheters sampled whilst in situ. Sampling took place within 1 h of catheter placement. Bacteria were isolated from 16% of the catheter distal tips sampled in situ. The guidewires used to insert the devices were also contaminated (50%). When CVC were inserted via a protective sheath, avoiding contact with the skin. the incidence of microbial contamination was reduced. These findings suggest that despite rigorous skin disinfection and strict aseptic technique, viable microorganisms are impacted onto the distal tip of CVC during the insertion procedure. Needleless intravascular access devices have been introduced in order to reduce the incidence of need1estick injury. However, it was unclear whether such connectors would act as a portal of entry for microorganisms to CVC. The efficacy of these devices was investigated. Within the controlled laboratory environment it was demonstrated that needleless devices, when challenged with microorganisms, did not allow the passage of microbes when flu id was injected. This therefore suggested that the devices should not increase the risk of catheter colonisation. When used in clinical practice however microbial contamination of the needleless connectors was 55 % in comparison to the routinely used luer connectors (23%). The cost of infections associated with CVC was determined. Twenty patients catheterised with a CVC designed for long term use who were admitted to hospital with a presumptive diagnosis of catheter-related infection were studied. The treatment given specifically for this infection was costed. The mean cost of such an infection was £ 1781.81. Throughout the UK this may amount to £1.565.906 per annum. The cost of infections associated with CVC designed for short term use was estimated to be between 5 and 7 million pounds per annum in the UK. In an attempt to reduce both the incidence and cost of catheter- related infection antimicrobial CVC have been developed. The efficacy of a novel polyurethane CVC impregnated on both the internal and external catheter surface with the quaternary ammonium compound benzalkonium chloride was investigated. Eighty eight patients received an antimicrobial catheter and 78 patients a conventional polyurethane CVC. The anti-microbial CVC resulted in a reduction in microbial colonisation of the external and internal polymer surfaces as compared to the control device. The observed reduction in microbial colonisation with the anti-microbial CVC may decrease the likelihood of subsequent infection offering a useful approach to the prevention of catheter-related infections.