Superstructure fiber gratings via single step femtosecond laser inscription

We present the development of superstructure fiber gratings (SFG) in Ge-doped, silica optical fiber using femtosecond laser inscription. We apply a simple but extremely effective single step process to inscribe low loss, sampled gratings with minor polarization dependence. The method results in a controlled modulated index change with complete suppression of mode coupling associated with the overlapping LPG structure leading to highly symmetric superstructure spectra, with the grating reflection well within the Fourier design limit. The devices are characterized and compared with numerical modeling by solving Maxwell's equations and calculating the back reflection spectrum using the bidirectional beam propagation method (BiBPM). Experimental results validate our numerical analysis, allowing for the estimation of inscription parameters such as the ac index modulation change, and the wavelength, position and relative strength of each significant resonance peak. We also present results on temperature and refractive index measurements showing potential for sensing applications.

Superstructure fiber gratings via single step femtosecond laser inscription

We present the development of superstructure fiber gratings (SFG) in Ge-doped, silica optical fiber using femtosecond laser inscription. We apply a simple but extremely effective single step process to inscribe low loss, sampled gratings with minor polarization dependence. The method results in a controlled modulated index change with complete suppression of mode coupling associated with the overlapping LPG structure leading to highly symmetric superstructure spectra, with the grating reflection well within the Fourier design limit. The devices are characterized and compared with numerical modeling by solving Maxwell's equations and calculating the back reflection spectrum using the bidirectional beam propagation method (BiBPM). Experimental results validate our numerical analysis, allowing for the estimation of inscription parameters such as the ac index modulation change, and the wavelength, position and relative strength of each significant resonance peak. We also present results on temperature and refractive index measurements showing potential for sensing applications.

New cassettes for single-step drug-resistance and prototrophic marker switching in fission yeast

Copyright © 2015 John Wiley & Sons, Ltd. Funded by College of Life Science and Medicine, University of Aberdeen, UK This work was funded by a start-up grant from the College of Life Science and Medicine, University of Aberdeen, UK. I am grateful to J. Bähler, E. Hartsuiker, F. Klein, J. Kohli, K. Nasmyth, M. C. Whitby, the Leibniz Institute – German Collection of Microorganisms and Cell Cultures (DMSZ) and the National BioResource Project Japan (NBRP) for providing materials used in this study. I thank Alistair J. P. Brown and Takashi Kubota for critically reading this manuscript.

New cassettes for single-step drug-resistance and prototrophic marker switching in fission yeast

Copyright © 2015 John Wiley & Sons, Ltd. Funded by College of Life Science and Medicine, University of Aberdeen, UK This work was funded by a start-up grant from the College of Life Science and Medicine, University of Aberdeen, UK. I am grateful to J. Bähler, E. Hartsuiker, F. Klein, J. Kohli, K. Nasmyth, M. C. Whitby, the Leibniz Institute – German Collection of Microorganisms and Cell Cultures (DMSZ) and the National BioResource Project Japan (NBRP) for providing materials used in this study. I thank Alistair J. P. Brown and Takashi Kubota for critically reading this manuscript.

Comportamento eletroquímico da N-nitrosotiazolidina ácido carboxílico sobre eletrodos de ouro e mercúrio

The electrochemical behavior of N-nitrosothiazolidine carboxylic acid (NTAC) on gold and hanging mercury electrodes, using the cyclic and square wave voltammetries, was studied. Whereas NTAC suffer reduction in a single step on the mercury electrode, two peaks appears on the cyclic voltammograms on the gold electrode, one anodic peak overlaying the gold oxide process at 1.2 V and one cathodic peak at -0.41 V vs Ag/AgCl, KCl 3.0 mol L-1. The cathodic peak depends on the previous oxidation of NTAC at the electrode surface, presents irreversible and adsorption controlled characteristics and it is suitable for quantitative purposes.

Heterogeneous kinetics of the reduction of chromium (VI) by elemental iron

Zero valent iron (ZVI) has been extensively used as a reactive medium for the reduction of Cr(VI) to Cr(III) in reactive permeable barriers. The kinetic rate depends strongly on the superficial oxidation of the iron particles used and the preliminary washing of ZVI increases the rate. The reaction has been primarily modelled using a pseudo-first-order kinetics which is inappropriate for a heterogeneous reaction. We assumed a shrinking particle type model where the kinetic rate is proportional to the available iron surface area, to the initial volume of solution and to the chromium concentration raised to a power ˛ which is the order of the chemical reaction occurring at surface. We assumed α= 2/3 based on the likeness to the shrinking particle models with spherical symmetry. Kinetics studies were performed in order to evaluate the suitability of this approach. The influence of the following parameters was experimentally studied: initial available surface area, chromium concentration, temperature and pH. The assumed order for the reaction was confirmed. In addition, the rate constant was calculated from data obtained in different operating conditions. Digital pictures of iron balls were periodically taken and the image treatment allowed for establishing the time evolution of their size distribution.

Combining phospholipases and a liquid lipase for one-step biodiesel production using crude oils

Background Enzymatic biodiesel is becoming an increasingly popular topic in bioenergy literature because of its potential to overcome the problems posed by chemical processes. However, the high cost of the enzymatic process still remains the main drawback for its industrial application, mostly because of the high price of refined oils. Unfortunately, low cost substrates, such as crude soybean oil, often release a product that hardly accomplishes the final required biodiesel specifications and need an additional pretreatment for gums removal. In order to reduce costs and to make the enzymatic process more efficient, we developed an innovative system for enzymatic biodiesel production involving a combination of a lipase and two phospholipases. This allows performing the enzymatic degumming and transesterification in a single step, using crude soybean oil as feedstock, and converting part of the phospholipids into biodiesel. Since the two processes have never been studied together, an accurate analysis of the different reaction components and conditions was carried out. Results Crude soybean oil, used as low cost feedstock, is characterized by a high content of phospholipids (900 ppm of phosphorus). However, after the combined activity of different phospholipases and liquid lipase Callera Trans L, a complete transformation into fatty acid methyl esters (FAMEs >95%) and a good reduction of phosphorus (P <5 ppm) was achieved. The combination of enzymes allowed avoidance of the acid treatment required for gums removal, the consequent caustic neutralization, and the high temperature commonly used in degumming systems, making the overall process more eco-friendly and with higher yield. Once the conditions were established, the process was also tested with different vegetable oils with variable phosphorus contents. Conclusions Use of liquid lipase Callera Trans L in biodiesel production can provide numerous and sustainable benefits. Besides reducing the costs derived from enzyme immobilization, the lipase can be used in combination with other enzymes such as phospholipases for gums removal, thus allowing the use of much cheaper, non-refined oils. The possibility to perform degumming and transesterification in a single tank involves a great efficiency increase in the new era of enzymatic biodiesel production at industrial scale.

Electrochemical reduction of azo-based chlorotriazine reactive dyes

The reduction process of the azo dyes reactive red 120 and reactive green 19 was investigated in B-R buffer pH 2-12 by differential pulse polarography, cyclic voltammetry and controlled potential electrolyse. The reactive red 120 presents two azo groups reducible in a single step of 8 electrons followed by simultaneous reduction of the two clorotriazine groups. The reduction of reactive green 19 is complicated by the presence of azo groups and chlorotriazine moyeties in a non symmetrical molecule. The peaks can be monitored for dyes determination in concentration level up to 1x10(-7) mol/L and 1x10(-9) mol/L using differential pulse polarography or cathodic stripping voltammetry.

Reduction of cement leakage by sequential PMMA application in a vertebroplasty model

PURPOSE Leakage is the most common complication of percutaneous cement augmentation of the spine. The viscosity of the polymethylmethacrylate (PMMA) cement is strongly correlated with the likelihood of cement leakage. We hypothesized that cement leakage can be reduced by sequential cement injection in a vertebroplasty model. METHODS A standardized vertebral body substitute model, consisting of aluminum oxide foams coated by acrylic cement with a preformed leakage path, simulating a ventral vein, was developed. Three injection techniques of 6 ml PMMA were assessed: injection in one single step (all-in-one), injection of 1 ml at the first and 5 ml at the second step with 1 min latency in-between (two-step), and sequential injection of 0.5 ml with 1-min latency between the sequences (sequential). Standard PMMA vertebroplasty cement was used; each injection type was tested on ten vertebral body substitute models with two possible leakage paths per model. Leakage was assessed by radiographs using a zonal graduation: intraspongious = no leakage and extracortical = leakage. RESULTS The leakage rate was significantly lower in the "sequential" technique (2/20 leakages) followed by "two-step" (15/20) and "all-in-one" (20/20) techniques (p < 0.001). The RR for a cement leakage was 10.0 times higher in the "all-in-one" compared to the "sequential" group (95 % confidence intervals 2.7-37.2; p < 0.001). CONCLUSIONS The sequential cement injection is a simple approach to minimize the risk for leakage. Taking advantage of the temperature gradient between body and room temperature, it is possible to increase the cement viscosity inside the vertebra while keeping it low in the syringe. Using sequential injection of small cement volumes, further leakage paths are blocked before further injection of the low-viscosity cement.

Antibacterial activity of bovine lactoferrin-derived peptides

Several peptides sharing high sequence homology with lactoferricin B (Lf-cin B) were generated from bovine lactoferrin (Lf) with recombinant chymosin. Two peptides were copurified. one identical to Lf-cin B and another differing from Lf-cin B by the inclusion of a C-terminal alanine (lactoferricin). Two other peptides were copurified from chymosin-hydrolyzed Lf. one differing from Lf-cin B by the inclusion of C-terminal alanyl-leucine and the other being a heterodimer linked by a disulfide bond, These peptides were isolated in a single step from chymosin-hydrolyzed Lf by membrane ton-exchange chromatography and were purified by reverse-phase high-pressure liquid chromatography (HPLC), They were characterized by. N-terminal Edman sequencing, mass spectrometry, and antibacterial activity determination, Pure lactoferricin, prepared from pepsin-hydrolyzed Lf, was purified by standard chromatography techniques, This peptide was analyzed against a number of gram-positive and gram-negative bacteria before and after reduction of its disulfide bond or cleavage after its single methionine residue and was found to inhibit the growth of all the test bacteria at a concentration of 8 mu M or less, Subfragments of lactoferricin were isolated from reduced and cleaved peptide by reverse-phase HPLC, Subfragment 1 (residues I to 10) was active against most of the test microorganisms at concentrations of 10 to 50 mu M. Subfragment 2 (residues 11 to 26) was active against only a few microorganisms at concentrations up to 100 mu M. These antibacterial studies indicate that the activity of lactoferricin Is mainly, but not wholly, due to its N-terminal region.

Can the durability of one-step self-etch adhesives be improved by double application or by an extra layer of hydrophobic resin?

Objectives: This study evaluated the immediate and 6-month resin-dentin mu-bond strength (mu TBS) of one-step self-etch systems (Adper Prompt L-Pop [AD] 3M ESPE; Xeno III [XE] Dentsply De Trey; iBond [iB] Heraeus Kulzer) under different application modes. Materials and methods: Dentin oclusal surfaces were exposed by grinding with 600-grit SiC paper. The adhesives were applied according to the manufacturer`s directions [MD], or with double application of the adhesive layer [DA] or following the manufacturer`s directions plus a hydrophobic resin layer coating [HL]. After applying the adhesive resins, composite crowns were built up incrementally. After 24-h water storage, the specimens were serially sectioned in ""x"" and ""y"" directions to obtain bonded sticks of about 0.8 mm 2 to be tested immediately [IM] or after 6 months of water storage [6M] at a crosshead speed of 0.5 mm/min. The data from each adhesive was analyzed by a two-way repeated measures ANOVA (mode of application vs. storage time) and Tukey`s test (alpha = 0.05). Results: The adhesives performed differently according to the application mode. The DA and HL either improved the immediate performance of the adhesive or did not differ from the MD. The resin-dentin bond strength values observed after 6 months were higher when a hydrophobic resin coat was used than compared to those values observed under the manufacturer`s directions. Conclusions: The double application of one-step self-etch system can be safety performed however the application of an additional hydrophobic resin layer can improve the immediate resin-dentin bonds and reduce the degradation of resin bonds over time. (c) 2008 Elsevier Ltd. All rights reserved.

Optimisation of an asymmetric polymerase chain reaction assay for the amplification of single-stranded DNA from Wuchereria bancrofti for electrochemical detection

Single-stranded DNA (ssDNA) is a prerequisite for electrochemical sensor-based detection of parasite DNA and other diagnostic applications. To achieve this detection, an asymmetric polymerase chain reaction method was optimised. This method facilitates amplification of ssDNA from the human lymphatic filarial parasite Wuchereria bancrofti. This procedure produced ssDNA fragments of 188 bp in a single step when primer pairs (forward and reverse) were used at a 100:1 molar ratio in the presence of double-stranded template DNA. The ssDNA thus produced was suitable for immobilisation as probe onto the surface of an Indium tin oxide electrode and hybridisation in a system for sequence-specific electrochemical detection of W. bancrofti. The hybridisation of the ssDNA probe and target ssDNA led to considerable decreases in both the anodic and the cathodic currents of the system's redox couple compared with the unhybridised DNA and could be detected via cyclic voltammetry. This method is reproducible and avoids many of the difficulties encountered by conventional methods of filarial parasite DNA detection; thus, it has potential in xenomonitoring.

Expression and one-step purification of Plasmodium proteins in dictyostelium.

Nearly full-length Circumsporozoite protein (CSP) from Plasmodium falciparum, the C-terminal fragments from both P. falciparm and P. yoelii CSP and a fragment comprising 351 amino acids of P.vivax MSPI were expressed in the slime mold Dictyostelium discoideum. Discoidin-tag expression vectors allowed both high yields of these proteins and their purification by a nearly single-step procedure. We exploited the galactose binding activity of Discoidin Ia to separate the fusion proteins by affinity chromatography on Sepharose-4B columns. Inclusion of a thrombin recognition site allowed cleavage of the Discoidin-tag from the fusion protein. Partial secretion of the protein was obtained via an ER independent pathway, whereas routing the recombinant proteins to the ER resulted in glycosylation and retention. Yields of proteins ranged from 0.08 to 3 mg l(-1) depending on the protein sequence and the purification conditions. The recognition of purified MSPI by sera from P. vivax malaria patients was used to confirm the native conformation of the protein expressed in Dictyostelium. The simple purification procedure described here, based on Sepharose-4B, should facilitate the expression and the large-scale purification of various Plasmodium polypeptides.

Activation chimiosélective et dérivatisation d’amides et d'alcools : synthèse de plusieurs groupements fonctionnels et hétérocycles

Un objectif majeur en chimie organique est le développement de méthodes de synthèses générales, simples et peu coûteuses permettant la modification efficace des ressources naturelles en différents produits d’intérêt public. En particulier, la recherche de méthodes chimiosélectives et de méthodes dites « vertes » représente un intérêt croissant pour le secteur industriel (dont le domaine pharmaceutique). En fait, l’application en synthèse sur grande échelle de procédés catalytiques, sélectifs et utilisant des conditions douces permet de réduire le volume de déchets et la demande énergétique, minimisant ainsi les coûts de production et les effets néfastes sur l’environnement. Dans ce contexte, le groupe de recherche du Professeur André B. Charette de l’Université de Montréal s’intéresse au développement de méthodes générales et chimiosélectives permettant la transformation de fonctionnalités aisément accessibles tels que les amides et les alcools. La fonction amide, aussi appelée liaison peptidique dans les protéines, est présente dans diverses familles de molécules naturelles et est couramment employée comme intermédiaire synthétique dans la synthèse de produits d’intérêt pharmaceutique. Le groupement alcool est, quant à lui, l’une des fonctionnalités les plus abondantes dans la nature, intrinsèquement et largement utilisé en chimie de synthèse. Dans le cadre de cette thèse, des transformations simples, générales et chimiosélectives ont été réalisées sur des amides secondaires et tertiaires, ainsi que sur des alcools primaires et secondaires. La première partie de ce manuscrit se penche sur l’activation de la fonction amide par l’anhydride triflique (Tf2O), suivie de l’addition nucléophile de différents réactifs permettant ainsi la formation de plusieurs groupements fonctionnels versatiles, parfois indispensables, couramment employés en chimie organique tels que les aldimines, les aldéhydes, les amines, les cétones, les cétimines et des dérivés de la fonction amidrazone. Cette dernière fonctionnalité a également été utilisée dans des réactions successives vers la formation d’hétérocycles. De ce fait, des 1,2,4-triazoles ont été formés suite à une cyclodéshydratation initiée en conditions thermiques et faiblement acides. D’autre part, des 3-aminoindazoles ont été synthétisés par une fonctionnalisation C–H catalysée par un sel de palladium (II). La deuxième partie de la thèse est consacrée à la réaction de Mitsunobu en conditions acides, permettant ainsi la substitution nucléophile d’alcools en présence de carbamines (ou amines ne possédant pas de groupement électro-attracteurs). Ce type de nucléophile, basique lorsqu’utilisé comme base libre (avec un pKa se situant au-dessus de 13 dans le DMSO), n’est intrinsèquement pas compatible dans les conditions standards de la réaction de Mitsunobu. Contrairement aux conditions usuelles multi-étapes employant la réaction de Mitsunobu, la méthode développée au cours de cette étude permet la formation d’amines substituées en une seule étape et ne requiert pas l’emploi de groupements protecteurs.