Effect of fertilizer placement on nitrogen loss from sugarcane in tropical Queensland

This paper reports on the fate of nitrogen (N) in a first ratoon sugarcane (Saccharum officinarum L.) crop in the wet tropics of Queensland when urea was either surface applied or drilled into the soil 3-4 days after harvesting the plant cane. Ammonia volatilization was measured with a micrometeorological method, and fertilizer N recovery in plants and soil, to a depth of 140 cm, was determined by mass balance in macroplots with N labelled urea 166 and 334 days after fertilizer application. The bulk of the fertilizer and soil N uptake by the sugarcane occurred between fertilizing and the first sampling on day 166. Nitrogen use efficiency measured as the recovery of labelled N in the plant was very low. At the time of the final sampling (day 334), the efficiencies for the surface and subsurface treatments were 18.9% and 28.8%, respectively. The tops, leaves, stalks and roots in the subsurface treatment contained significantly more fertilizer N than the corresponding parts in the surface treatment. The total recoveries of fertilizer N for the plant-trash-soil system on day 334 indicate significant losses of N in both treatments ( 59.1% and 45.6% of the applied N in the surface and subsurface treatments, respectively). Drilling the urea into the soil instead of applying it to the trash surface reduced ammonia loss from 37.3% to 5.5% of the applied N. Subtracting the data for ammonia loss from total loss suggests that losses by leaching and denitrification combined increased from 21.8% and 40.1% of the applied N as a result of the change in method of application. While the treatment resulted in increased denitrification and/or leaching loss, total N loss was reduced from 59.1% to 45.6%, ( a saving of 13.5% of the applied N), which resulted in an extra 9.9% of the applied N being assimilated by the crop.

Using crop simulation to generate genotype by environment interaction effects for sorghum in water-limited environments

Multi-environment trials (METs) used to evaluate breeding lines vary in the number of years that they sample. We used a cropping systems model to simulate the target population of environments (TPE) for 6 locations over 108 years for 54 'near-isolines' of sorghum in north-eastern Australia. For a single reference genotype, each of 547 trials was clustered into 1 of 3 'drought environment types' (DETs) based on a seasonal water stress index. Within sequential METs of 2 years duration, the frequencies of these drought patterns often differed substantially from those derived for the entire TPE. This was reflected in variation in the mean yield of the reference genotype. For the TPE and for 2-year METs, restricted maximum likelihood methods were used to estimate components of genotypic and genotype by environment variance. These also varied substantially, although not in direct correlation with frequency of occurrence of different DETs over a 2-year period. Combined analysis over different numbers of seasons demonstrated the expected improvement in the correlation between MET estimates of genotype performance and the overall genotype averages as the number of seasons in the MET was increased.

Infusing the use of seasonal climate forecasting into crop management practice in North East Australia using discussion support software

Seasonal climate forecasting offers potential for improving management of crop production risks in the cropping systems of NE Australia. But how is this capability best connected to management practice? Over the past decade, we have pursued participative systems approaches involving simulation-aided discussion with advisers and decision-makers. This has led to the development of discussion support software as a key vehicle for facilitating infusion of forecasting capability into practice. In this paper, we set out the basis of our approach, its implementation and preliminary evaluation. We outline the development of the discussion support software Whopper Cropper, which was designed for, and in close consultation with, public and private advisers. Whopper Cropper consists of a database of simulation output and a graphical user interface to generate analyses of risks associated with crop management options. The charts produced provide conversation pieces for advisers to use with their farmer clients in relation to the significant decisions they face. An example application, detail of the software development process and an initial survey of user needs are presented. We suggest that discussion support software is about moving beyond traditional notions of supply-driven decision support systems. Discussion support software is largely demand-driven and can compliment participatory action research programs by providing cost-effective general delivery of simulation-aided discussions about relevant management actions. The critical role of farm management advisers and dialogue among key players is highlighted. We argue that the discussion support concept, as exemplified by the software tool Whopper Cropper and the group processes surrounding it, provides an effective means to infuse innovations, like seasonal climate forecasting, into farming practice. Crown Copyright (C) 2002 Published by Elsevier Science Ltd. All rights reserved.

Development of a generic crop model template in the cropping system model APSIM

The Agricultural Production Systems slMulator, APSIM, is a cropping system modelling environment that simulates the dynamics of soil-plant-management interactions within a single crop or a cropping system. Adaptation of previously developed crop models has resulted in multiple crop modules in APSIM, which have low scientific transparency and code efficiency. A generic crop model template (GCROP) has been developed to capture unifying physiological principles across crops (plant types) and to provide modular and efficient code for crop modelling. It comprises a standard crop interface to the APSIM engine, a generic crop model structure, a crop process library, and well-structured crop parameter files. The process library contains the major science underpinning the crop models and incorporates generic routines based on physiological principles for growth and development processes that are common across crops. It allows APSIM to simulate different crops using the same set of computer code. The generic model structure and parameter files provide an easy way to test, modify, exchange and compare modelling approaches at process level without necessitating changes in the code. The standard interface generalises the model inputs and outputs, and utilises a standard protocol to communicate with other APSIM modules through the APSIM engine. The crop template serves as a convenient means to test new insights and compare approaches to component modelling, while maintaining a focus on predictive capability. This paper describes and discusses the scientific basis, the design, implementation and future development of the crop template in APSIM. On this basis, we argue that the combination of good software engineering with sound crop science can enhance the rate of advance in crop modelling. Crown Copyright (C) 2002 Published by Elsevier Science B.V. All rights reserved.

Future contributions of crop modelling - from heuristics and supporting decision making to understanding genetic regulation and aiding crop improvement

Crop modelling has evolved over the last 30 or so years in concert with advances in crop physiology, crop ecology and computing technology. Having reached a respectable degree of acceptance, it is appropriate to review briefly the course of developments in crop modelling and to project what might be major contributions of crop modelling in the future. Two major opportunities are envisioned for increased modelling activity in the future. One opportunity is in a continuing central, heuristic role to support scientific investigation, to facilitate decision making by crop managers, and to aid in education. Heuristic activities will also extend to the broader system-level issues of environmental and ecological aspects of crop production. The second opportunity is projected as a prime contributor in understanding and advancing the genetic regulation of plant performance and plant improvement. Physiological dissection and modelling of traits provides an avenue by which crop modelling could contribute to enhancing integration of molecular genetic technologies in crop improvement. Crown Copyright (C) 2002 Published by Elsevier Science B.V. All rights reserved.

The Three-dimensional Solution Structure of NaD1, a New Floral Defensin from Nicotiana alata and its Application to a Homology Model of the Crop Defense Protein alfAFP

NMR spectroscopy and simulated annealing calculations have been used to determine the three-dimensional structure of NaD1, a novel antifungal and insecticidal protein isolated from the flowers of Nicotiana alata. NaD1 is a basic, cysteine-rich protein of 47 residues and is the first example of a plant defensin from flowers to be characterized structurally. Its three-dimensional structure consists of an a-helix and a triple-stranded anti-parallel beta-sheet that are stabilized by four intramolecular disulfide bonds. NaD1 features all the characteristics of the cysteine-stabilized up motif that has been described for a variety of proteins of differing functions ranging from antibacterial insect defensins and ion channel-perturbing scorpion toxins to an elicitor of the sweet taste response. The protein is biologically active against insect pests, which makes it a potential candidate for use in crop protection. NaD1 shares 31% sequence identity with alfAFP, an antifungal protein from alfalfa that confers resistance to a fungal pathogen in transgenic potatoes. The structure of NaD1 was used to obtain a homology model of alfAFP, since NaD1 has the highest level of sequence identity with alfAFP of any structurally characterized antifungal defensin. The structures of NaD1 and alfAFP were used in conjunction with structure - activity data for the radish defensin Rs-AFP2 to provide an insight into structure-function relationships. In particular, a putative effector site was identified in the structure of NaD1 and in the corresponding homology model of alfAFP. (C) 2002 Elsevier Science Ltd. All rights reserved.

Chromosomal gains and losses in ocular melanoma detected by comparative genomic hybridization in an Australian population-based study

To define the location of potential oncogenes and tumor suppressor genes in ocular melanoma we carried out comparative genomic hybridization (CGH) analysis on a population-based series of 25 formalin-fixed, paraffin-embedded primary tumors comprising 17 choroidal, 2 ciliary body, 4 iris, and 2 conjunctival melanomas. Twelve (48%) of the 25 melanomas showed no chromosomal changes and 13 (52%) had at least one chromosomal gain or loss. The mean number of CGH changes in all tumors was 3.3, with similar mean numbers of chromosomal gains (1.5) and losses (1.8). The highest number of chromosomal changes (i.e., nine) occurred in a conjunctival melanoma and included four changes not observed in tumors at any other ocular site (gains in 22q and 11p and losses in 6p and 17p). The most frequent gains in all primary ocular melanomas were on chromosome arm 8q (69%), 6p (31%) and 8p (23%) and the most frequent losses were on 6q (38%), 10q (23%), and 16q (23%). The most common pairing was gain in 8p and gain in 8q, implying a whole chromosome copy number increase; gains in 8p occurred only in conjunction with gains in 8q. The smallest regions of copy number alteration were mapped to gain of 8q21 and loss of 6q21, 10q21, and 16q22. Sublocalization of these chromosomal changes to single-band resolution should accelerate the identification of genes involved in the genesis of ocular melanoma.

Towards the on-farm conservation of the assassin bug Pristhesancus plagipennis (Walker) (Hemiptera : Reduviidae) during winter using crop plants as refuges

Habitat instability associated with seasonal crop succession in broad-acre farming systems presents a problem for the conservation and utilisation of beneficial insects in annual field crops. The present paper describes two experiments used to measure the potential of seven plant species to be utilised as winter refuges to support and conserve the predatory bug Pristhesancus plagipennis (Walker). In the first experiment, replicated plots of canola (Brassica napus ), red salvia (Salvia coccinea ), niger (Guizotia abyssinica ), linseed (Linum usitatissimum ), lupins (Lupinus angustifolius ), and lucerne (Medicago falcata ) were planted in a randomized experiment during Autumn 1998. Upon crop establishment, adults and nymphs of P. plagipennis were released into treatment plots and their numbers were assessed, along with those of their potential prey, throughout the ensuing winter months. Post-release sampling suggested that canola and niger retained a proportion of adult P. plagipennis , while niger, lucerne and canola retained some nymphs. The other plant species failed to support P. plagipennis nymphs and adults postrelease. In the second experiment, niger was compared with two lines of sunflower (Helianthus annus ). Both sunflower lines harboured significantly higher (P < 0.05) densities of P. plagipennis nymphs than did niger. The more successful refuge treatments (sunflower, niger and canola) had an abundance of yellow flowers that were attractive to pollinating insects, which served as supplementary prey on which P. plagipennis were observed to feed. Sunflower and niger also supported high densities of the prey insect Creontiades dilutus (Stal) and provided protective leafy canopies which supplied shelter during the winter months. The potential and limitations for using each plant species as a winter refuge to retain P. plagipennis during winter are discussed.

Cenários de mudanças climáticas para a América do Sul : impacto no zoneamento agroclimático da cana-de-açúcar

O Painel Intergovernamental sobre Mudanças Climáticas (IPCC) através do seu Quarto Relatório de Avaliação das Mudanças Climáticas Globais (IPCC-AR4), publicado em 2007, atribui as emissões de gases de efeito estufa como a principal causa do aumento médio das temperaturas e alerta para uma elevação entre 1,8 ºC e 6,4 ºC até 2100, podendo modificar assim a aptidão climática para as culturas agrícolas em diversas regiões do planeta. Diante disso, existe a necessidade de substituição dos combustíveis fósseis por fontes renováveis e limpas de energia, como o etanol. A cana-de-açúcar apresenta-se, portanto, como uma cultura estratégica na produção do etanol. O presente trabalho teve como objetivos: 1) avaliar o desempenho dos Modelos Climáticos Globais (MCGs) do IPCC-AR4 na simulação de dados climáticos de temperatura do ar e precipitação pluviométrica para o período anual e mensal; 2) elaborar o zoneamento agroclimático da cana-de-açúcar para a América do Sul considerando o clima referência e o futuro para as décadas de 2020, 2050 e 2080 em função do cenário de emissão A1B considerado pessimista e que usa um equilíbrio entre todas as fontes de energia. Para a avaliação do desempenho dos MCGs, foram utilizados dados climáticos médios mensais observados de precipitação e temperatura do ar provenientes do Climatic Research Unit (CRU) e dados simulados oriundos dos 22 MCGs do IPCC (cenário 20c3m) compreendidos entre o período de 1961-1990, além do Multimodel (ensemble) – MM que é a média da combinação dos dados de todos os modelos. O desempenho dos MCGs foi avaliado pelos índices estatísticos: desvio padrão, correlação, raiz quadrada da média do quadrado das diferenças centralizadas e o “bias” dos dados simulados com os observados, que foram representados no diagrama de Taylor. Para a etapa da elaboração do zoneamento agroclimático procedeu-se o cálculo dos balanços hídricos (referência e futuros) da cultura, pelo método de Thornthwaite & Mather (1955). Para o cenário referência, utilizaram-se dados das médias mensais da precipitação e temperatura provenientes do CRU, enquanto que para as projeções futuras, dados provenientes das anomalias do Multimodel (ensemble) – MM para as décadas de 2020, 2050 e 2080, que foram ajustados, obtendo-se assim as projeções futuras para cada período analisado. Baseado nos mapas temáticos reclassificados de deficiência hídrica anual, temperatura média anual, excedente hídrico anual e no índice de satisfação das necessidades de água (ISNA), realizou-se uma sobreposição dessas informações obtendo assim, os mapas finais do zoneamento agroclimático da cana-de-açúcar. Posteriormente ao zoneamento, realizou-se a análise das transições (ganhos, perdas e persistências) entre as classes de aptidão climática da cultura. Os resultados mostram que o Multimodel (ensemble) – MM para o período mensal apresenta o melhor desempenho entre os modelos analisados. As áreas inaptas correspondem a maior parte da América do Sul e uma expressiva transição entre as classes de aptidão climática da cultura.

Feeding non-preference by Spodoptera frugiperda and Spodoptera eridania on tomato genotypes

Larvae of the genus Spodoptera spp. are highly polyphagous and can cause economical losses in several agricultural crops. Given their growing importance in the tomato crop, especially for industry, this work aimed to evaluate the feeding non-preference by larvae of Spodoptera frugiperda (J. E. Smith, 1797) and Spodoptera eridania (Cramer, 1782) on tomato genotypes and classify them by the levels of resistance. The commercial cultivar Santa Clara was set as the susceptible standard and line PI 134417 as the resistant standard to evaluate the lines PI 134418, PI 126931, LA 462 and LA 716. Feeding non-preference tests were performed under non-choice and free-choice conditions to evaluate the genotype attractiveness to larvae at predetermined times after their release, as well as the leaf area consumed. Overall, the genotypes LA 716 and PI 126931 were the least attractive to S. frugiperda, whereas Santa Clara was the most attractive and consumed. For S. eridania, the genotypes PI 126931, LA 462, LA 716 and PI 134418 were the least preferred for feeding, and Santa Clara and PI 134417 were the most attractive and consumed. The genotypes LA 716 and PI 126931 are moderately resistant to S. frugiperda and S. eridania; PI 134418 and LA 462 are moderately resistant to S. eridania; PI 134417 is susceptible to S. frugiperda and S. eridania; and Santa Clara is highly susceptible to both S. frugiperda and S. eridania.

Nitrate leaching through climatologic water balance in a fertigated coffee plantation

Nitrate losses from soil profiles by leaching should preferentially be monitored during high rainfall events and during irrigation when fertilizer nitrogen applications are elevated. Using a climatologic water balance, based on the models of Thornthwaite and Penman Monteith for potential evapotranspiration, drainage soil water fluxes below the root zone were estimated in a fertigated coffee crop. Soil solution extraction at the depth of 1 m allowed the calculation of nitrate leaching. The average nitrate concentration in soil solution for plots that received nitrogen by fertigation at a rate of 400 kg ha-1, was 5.42 mg L-1, surpassing the limit of the Brazilian legislation of 10.0 mg L-1, only during one month. For plots receiving 800 kg ha-1 of nitrogen, the average was 25.01 mg L-1, 2.5 times higher than the above-mentioned limit. This information indicates that nitrogen rates higher than 400 kg ha-1 are potentially polluting the ground water. Yearly nitrate amounts of leaching were 24.2 and 153.0 kg ha-1 for the nitrogen rates of 400 and 800 kg ha-1, respectively. The six times higher loss indicates a cost/benefit problem for coffee fertigations above 400 kg ha-1.

Maize nitrogen fertilization in two crop rotation systems under no-till

The objective of this study was to evaluate split nitrogen (N) fertilization of maize applied in band at sowing and top dressing with and without crop rotation, under no-till. The experiment was conducted with six N rates at sowing (0, 20, 30, 40, 50 and 60 kg ha-1) combined with three rates in top dressing (40, 70, 100 kg ha-1) and two management systems: after five cropping sequences of maize and crop rotation (maize + soybean + oat + soybean + corn) in a randomized block design with four replications. The crop rotation system increased yield in approximately 7% in relation to the area without rotation. The split of nitrogen fertilization, in rates above 39 and 54 kg ha-1 at sowing and 70 and 40 kg ha-1 in top dressing, resulted in yield higher than that obtained with the application of 100 kg ha-1 in top dressing. Grain yield was higher with the rates 50 and 70 kg ha-1 of N compared with that obtained with 20 and 100 kg ha-1 at sowing and top dressing, respectively. The rate 70 kg ha-1 of N resulted in the highest yield at the lowest cost compared with the revenues and costs incurred with the rates 40 and 100 kg ha-1.

Urease inhibitor (NBPT) and efficiency of single or split application of urea in wheat crop

NBPT (N-(n-butyl) thiophosphoric triamide), a urease inhibitor, has been reported as one of the most promising compounds to maximize urea nitrogen use in agricultural systems. The objective of this study was to evaluate the performance of irrigated wheat fertilized with urea or urea + NBPT as single or split application. The experiment was conducted from June to October 2006 in Viçosa, MG, Brazil. The experimental design followed a 2×2 factorial scheme, in which urea or urea + NBPT were combined with two modes of application: full dose at sowing (60kg ha-1) or split (20kg ha-1 at sowing + 40kg ha-1 as topdressing at tillering), in randomized blocks with ten replications. The split application of nitrogen fertilization does not improve the yield wheat under used conditions. The use of urease inhibitor improves the grain yield of wheat crop when urea is applied in topdressing at tillering, but its use does not promote difference when urea is applied in the furrow at planting.

Friction losses of Newtonian and non-Newtonian fluids flowing in laminar regime in a helical coil

This study aimed to carry out experimental work to determine, for Newtonian and non-Newtonian fluids, the friction factor (fc) with simultaneous heat transfer, at constant wall temperature as boundary condition, in fully developed laminar flow inside a vertical helical coil. The Newtonian fluids studied were aqueous solutions of glycerol, 25%, 36%, 43%, 59% and 78% (w/w). The non-Newtonian fluids were aqueous solutions of carboxymethylcellulose (CMC), a polymer, with concentrations of 0.2%, 0.3%, 0.4% and 0.6% (w/w) and aqueous solutions of xanthan gum (XG), another polymer, with concentrations of 0.1% and 0.2% (w/w). According to the rheological study done, the polymer solutions had shear-thinning behavior and different values of viscoelasticity. The helical coil used has an internal diameter, curvature ratio, length and pitch, respectively: 0.00483 m, 0.0263, 5.0 m and 11.34 mm. It was concluded that the friction factors, with simultaneous heat transfer, for Newtonian fluids can be calculated using expressions from literature for isothermal flows. The friction factors for CMC and XG solutions are similar to those for Newtonian fluids when the Dean number, based in a generalized Reynolds number, is less than 80. For Dean numbers higher than 80, the friction factors of the CMC solutions are lower those of the XG solutions and of the Newtonian fluids. In this range the friction factors decrease with the increase of the viscometric component of the solution and increase for increasing elastic component. The change of behavior at Dean number 80, for Newtonian and non-Newtonian fluids, is in accordance with the study of Ali [4]. There is a change of behavior at Dean number 80, for Newtonian and non-Newtonian fluids, which is in according to previous studies. The data also showed that the use of the bulk temperature or of the film temperature to calculate the physical properties of the fluid has a residual effect in the friction factor values.