Nitrogen defects and ferromagnetism in Cr-doped dilute magnetic semiconductor AlN from first principles

High Curie temperature of 900 K has been reported in Cr-doped AlN diluted magnetic semiconductors prepared by various methods, which is exciting for spintronic applications. It is believed that N defects play important roles in achieving the high-temperature ferromagnetism in good samples. Motivated by these experimental advances, we use a full-potential density-functional-theory method and supercell approach to investigate N defects and their effects on ferromagnetism of (Al,Cr)N with N vacancies (V-N). We investigate the structural and electronic properties of V-N, single Cr atom, Cr-Cr atom pairs, Cr-V-N pairs, and so on. In each case, the most stable structure is obtained by comparing different atomic configurations optimized in terms of the total energy and the force on every atom, and then it is used to calculate the defect formation energy and study the electronic structures. Our total-energy calculations show that the nearest substitutional Cr-Cr pair with the two spins in parallel is the most favorable and the nearest Cr-V-N pair makes a stable complex. Our formation energies indicate that V-N regions can be formed spontaneously under N-poor condition because the minimal V-N formation energy equals -0.23 eV or Cr-doped regions with high enough concentrations can be formed under N-rich condition because the Cr formation energy equals 0.04 eV, and hence real Cr-doped AlN samples are formed by forming some Cr-doped regions and separated V-N regions and through subsequent atomic relaxation during annealing. Both of the single Cr atom and the N vacancy create filled electronic states in the semiconductor gap of AlN. N vacancies enhance the ferromagnetism by adding mu(B) to the Cr moment each but reduce the ferromagnetic exchange constants between the spins in the nearest Cr-Cr pairs. These calculated results are in agreement with experimental observations and facts of real Cr-doped AlN samples and their synthesis. Our first-principles results are useful to elucidate the mechanism for the ferromagnetism and to explore high-performance Cr-doped AlN diluted magnetic semiconductors.

Syntheses of chromium(III) complexes with Schiff-base ligands and their catalytic behaviors for ethylene polymerization

A series of chromium(III) complexes LCrCl3 (4a-c) bearing chelating 2,2'-iminodiphenyisulfide ligands [L = (2-ArMeC=NAr)(2)S] was synthesized in good yields from the corresponding ligands and CrCl3.(THF). Using modified methylaluminoxane (MMAO) as a cocatalyst, these complexes display moderate activities towards ethylene polymerization, and produce highly linear polyethylenes with broad molecular weight distribution. Polymer yields, catalyst activities and the molecular weights, as well as the molecular weight distributions of the polymers can be controlled over a wide range by the variation of the structures of the chromium(III) complexes and the polymerization parameters, such as Al/Cr molar ratio, reaction temperature and ethylene pressure.

Electrochemical behavior of a series of undecatungstozincates monosubstituted by first-row transition metals, ZnW11M(H2O)O-39(n-) (M = Cr, Mn, Fe, Co, Ni, Cu or Zn)

The electrochemical behavior of a series of undecatungstozincates monosubstituted by first-row transition metals, ZnW11M(H2O)O-39(n-) (M=Cr, Mn, Fe, Co, Ni, Cu or Zn), was investigated systematically and comparably in aqueous solutions by electrochemical and in situ UV-visible-near-IR spectroelectrochemical methods. These compounds exhibit not only successive reduction processes of the addenda atoms (W) in a negative potential range, but some of them also involve redox reactions originating from the substituted transition metals (M) such as the reduction of Fe-III and Cu-II at less negative potentials and the oxidation of Mn-II at a more positive potential. Some interesting results and phenomena, especially of the transition metals, were found for the first time. Moreover, possible reaction mechanisms are proposed based on the experimental results.

Experimental design and batch experiments for optimization of Cr(VI) removal from aqueous solutions by hydrous cerium oxide nanoparticles

Hydrous cerium oxide (HCO) was synthesized by intercalation of solutions of cerium(III) nitrate and sodium hydroxide and evaluated as an adsorbent for the removal of hexavalent chromium from aqueous solutions. Simple batch experiments and a 2⁵ factorial experimental design were employed to screen the variables affecting Cr(VI) removal efficiency. The effects of the process variables; solution pH, initial Cr(VI) concentration, temperature, adsorbent dose and ionic strength were examined. Using the experimental results, a linear mathematical model representing the influence of the different variables and their interactions was obtained. Analysis of variance (ANOVA) demonstrated that Cr(VI) adsorption significantly increases with decreased solution pH, initial concentration and amount of adsorbent used (dose), but slightly decreased with an increase in temperature and ionic strength. The optimization study indicates 99% as the maximum removal at pH 2, 20 °C, 1.923 mM of metal concentration and a sorbent dose of 4 g/dm³. At these optimal conditions, Langmuir, Freundlich and Redlich–Peterson isotherm models were obtained. The maximum adsorption capacity of Cr(VI) adsorbed by HCO was 0.828 mmol/g, calculated by the Langmuir isotherm model. Desorption of chromium indicated that the HCO adsorbent can be regenerated using NaOH solution 0.1 M (up to 85%). The adsorption interactions between the surface sites of HCO and the Cr(VI) ions were found to be a combined effect of both anion exchange and surface complexation with the formation of an inner-sphere complex.

Genotoxicity and cytotoxicity of Cr(VI) and Pb²+ in Pisum sativum

A toxicidade dos metais é uma problemática que envolve a saúde humana e o ambiente, sendo necessária uma vigilância constante e uma avaliação dos danos precisa e robusta. As plantas, como principal fonte alimentar e de produtos, são de vital importância à sociedade humana. Devido a serem seres sesseis, este grupo é um dos mais afectados por poluentes, tornandoos objectos de estudo extremamente interessantes. O objectivo desta tese foi avaliar os efeitos genotóxicos e citotóxicos do Cr(VI) e Pb2+ na espécie modelo Pisum sativum L. No capitulo I é introduzida a problemática da toxicidade de ambos os metais, com especial relevo nas plantas, bem como as abordagens mais actuais no estudo da geno e citotoxicidade. No capitulo II são apresentados os resultados dos estudos da genotoxicidade do Pb2+ (II-1) e Cr(VI) (II-2 e II-3), tendo sido realizados analises de dano ao DNA a vários níveis e alterações do ciclo celular (II-1 e II-2), bem como a detecção de instabilidade de microssatelites (II-1 e II-3), que é um indicador do estado funcional do mecanismo de reparação do DNA. O capítulo III aborda o efeito de stresses abióticos na capacidade fotossintética da espécie modelo. No capítulo III-1, realizou-se um estudo pioneiro de avaliação da aplicabilidade da citometria de fluxo no estudo da fotossíntese, mais concretamente no estado funcional e estrutural dos cloroplastos, quando expostos a um inibidor da fotossíntese (Paraquat). Os dados obtidos neste estudo encorajaram a aplicação da técnica nos capítulos III-2 e III-3, nos quais se analisaram os efeitos dos metais Pb2+ (III- 2) e Cr(VI) (III-3) na capacidade fotossintética de plantas expostas a este metal; em estudos que envolveram vários marcadores clássicos, para alem dos da citometria de fluxo. Finalmente, no capítulo IV são apresentadas as conclusões finais do trabalho, uma comparativa entre os efeitos e níveis de toxicidade dos dois metais em estudo e são apontadas algumas perspectivas para futuros estudos, levantadas pelos dados obtidos.

Propagação de fendas por fadiga quando sujeitas a carregamentos em Modo I ou Modo III

A propagação de fenda sob fadiga pode ser observada em vários componentes mecânicos, que podem ser feitos de chapa fina ou espessa (ou cascas) e, consequentemente, serem sujeitos a estado plano de tensão ou estado plano de deformação, respectivamente. As cargas aplicadas num corpo sólido que contém um entalhe estreito ou uma fenda aguda irão induzir uma zona de escoamento limite de material com uma dimensão que dependerá das propriedades mecânicas do material, bem como a espessura do corpo, o comprimento de fenda e a intensidade das cargas aplicadas. A propagação da fenda pode então ocorrer sob modo I, II, III ou modo misto. Esta tese apresenta as funções integrais JI, JII e JIII , que foram correlacionadas com os factores de intensidade de tensão KI, KII e KIII, para provetes CT espessos e finos. A avaliação dos valores do Integral-J foi feita para diferentes comprimentos de fenda, ao longo da frente de fenda, usando o Método dos Elementos Finitos (MEF), com nós colapsados e intermédios deslocados a ¼ do comprimento da aresta, com o objectivo de simular a singularidade na extremidade da fenda. A interacção entre os modos de abertura, corte e rasgamento é também discutida. Adicionalmente, a propagação de fenda sob o modo I e o modo III foi determinada experimentalmente, à temperatura ambiente, para um aço inoxidável austenítico Cr-Mn de alta resistência.

Y-90-Ibritumomab Tiuxetan (Zevalin (R)) Consolidation of First Remission In Advanced-Stage Follicular Non-Hodgkin's Lymphoma: Updated Results After a Median Follow-up of 66.2 Months From the International, Randomized, Phase III First-Line Indolent Trial (FIT) In 414 Patients

The FIT trial was conducted to evaluate the safety and efficacy of 90Y-ibritumomab tiuxetan (0.4 mCi/kg; maximum dose 32 mCi) when used as consolidation of first complete or partial remission in patients with previously untreated, advanced-stage follicular lymphoma (FL). Patients were randomly assigned to either 90Y-ibritumomab treatment (n = 207) or observation (n = 202) within 3 months (mo) of completing initial induction therapy (chemotherapy only: 86%; rituximab in combination with chemotherapy: 14%). Response status prior to randomization did not differ between the groups: 52% complete response (CR)/CR unconfirmed (CRu) to induction therapy and 48% partial response (PR) in the 90Y-ibritumomab arm vs 53% CR/CRu and 44% PR in the control arm. The primary endpoint was progression-free survival (PFS) of the intent-to-treat (ITT) population. Results from the first extended follow-up after a median of 3.5 years revealed a significant improvement in PFS from the time of randomization with 90Y-ibritumomab consolidation compared with control (36.5 vs 13.3 mo, respectively; P < 0.0001; Morschhauser et al. JCO. 2008; 26:5156-5164). Here we report a median follow-up of 66.2 mo (5.5 years). Five-year PFS was 47% in the 90Y-ibritumomab group and 29% in the control group (hazard ratio (HR) = 0.51, 95% CI 0.39-0.65; P < 0.0001). Median PFS in the 90Y-ibritumomab group was 49 mo vs 14 mo in the control group. In patients achieving a CR/CRu after induction, 5-year PFS was 57% in the 90Y-ibritumomab group, and the median had not yet been reached at 92 months, compared with a 43% 5-year PFS in the control group and a median of 31 mo (HR = 0.61, 95% CI 0.42-0.89). For patients in PR after induction, the 5-year PFS was 38% in the 90Y-ibritumomab group with a median PFS of 30 mo vs 14% in the control group with a median PFS of 6 mo (HR = 0.38, 95% CI 0.27-0.53). Patients who had received rituximab as part of induction treatment had a 5-year PFS of 64% in the 90Y-ibritumomab group and 48% in the control group (HR = 0.66, 95% CI 0.30-1.47). For all patients, time to next treatment (as calculated from the date of randomization) differed significantly between both groups; median not reached at 99 mo in the 90Y-ibritumomab group vs 35 mo in the control group (P < 0.0001). The majority of patients received rituximab-containing regimens when treated after progression (63/82 [77%] in the 90Y-ibritumomab group and 102/122 [84%] in the control group). Overall response rate to second-line treatment was 79% in the 90Y-ibritumomab group (57% CR/CRu and 22% PR) vs 78% in the control arm (59% CR/CRu, 19% PR). Five-year overall survival was not significantly different between the groups; 93% and 89% in the 90Y-ibritumomab and control groups, respectively (P = 0.561). To date, 40 patients have died; 18 in the 90Y-ibritumomab group and 22 in the control group. Secondary malignancies were diagnosed in 16 patients in the 90Y-ibritumomab arm vs 9 patients in the control arm (P = 0.19). There were 6 (3%) cases of myelodysplastic syndrome (MDS)/acute myelogenous leukemia (AML) in the 90Y-ibritumomab arm vs 1 MDS in the control arm (P = 0.063). In conclusion, this extended follow-up of the FIT trial confirms the benefit of 90Y-ibritumomab consolidation with a nearly 3 year advantage in median PFS. A significant 5-year PFS improvement was confirmed for patients with a CR/CRu or a PR after induction. Effective rescue treatment with rituximab-containing regimens may explain the observed no difference in overall survival between both patient groups who were - for the greater part - rituximab-naïve.

Los sellos ambientales en el contexto del consumidor colombiano III

Los Sellos Ambientales dentro de la temática del Desarrollo Sostenible, puede ser uno de los medios frente a esta problemática ambiental. Para su éxito se requiere especificar los lineamientos posibles y aplicables a la población colombiana.

Crónicas de las III Jornadas Gastronómicas Castellano-Manchegas.

Celebración de la tercera edición de las Jornadas Gastronómicas de la región, donde con un pretexto gastronómico han confraternizado padres, profesores y estudiantes.

Structure determination, magnetic and optical properties of a new chromium(II) thioantimonate, [Cr((NH2CH2CH2)(3)N)]Sb4S7

The chromium(II) antimony(III) sulphicle, [Cr((NH2CH2CH2)(3)N)]Sb4S7, was synthesised under solvothermal conditions from the reaction of Sb2S3. Cr and S dissolved in tris(2-aminoethyl)amine (tren) at 438 K. The products were characterised by single-crystal X-ray diffraction. elemental analysis, SQUID magnetometry and diffuse reflectance spectroscopy. The compound crystallises in the monoclinic space group P2(1)/n with a = 7.9756(7), b = 10.5191(9), c = 25.880(2) angstrom and beta = 90.864(5)degrees. Alternating SbS33- trigonal pyramids and Sb36 semi-cubes generate Sb4S72- chains which are directly bonded to Cr(tren pendant units. The effective magnetic moment of 4.94(6)mu(B) shows a negligible orbital contribution, in agreement with expectations for Cr(II):d(4) in a (5)A ground state. The measured band gap of 2.14(3) eV is consistent with a correlation between optical band gap and framework density that is established from analysis of a wide range of antimony sulphides. (C) 2007 Elsevier Ltd. All rights reserved.

Modified section method for laser-welding of ill-fitting cp Ti and Ni-Cr alloy one-piece cast implant-supported frameworks

P>This study aimed to verify the effect of modified section method and laser-welding on the accuracy of fit of ill-fitting commercially pure titanium (cp Ti) and Ni-Cr alloy one-piece cast frameworks. Two sets of similar implant-supported frameworks were constructed. Both groups of six 3-unit implant-supported fixed partial dentures were cast as one-piece [I: Ni-Cr (control) and II: cp Ti] and evaluated for passive fitting in an optical microscope with both screws tightened and with only one screw tightened. All frameworks were then sectioned in the diagonal axis at the pontic region (III: Ni-Cr and IV: cp Ti). Sectioned frameworks were positioned in the matrix (10-Ncm torque) and laser-welded. Passive fitting was evaluated for the second time. Data were submitted to anova and Tukey-Kramer honestly significant difference tests (P < 0 center dot 05). With both screws tightened, one-piece cp Ti group II showed significantly higher misfit values (27 center dot 57 +/- 5 center dot 06 mu m) than other groups (I: 11 center dot 19 +/- 2 center dot 54 mu m, III: 12 center dot 88 +/- 2 center dot 93 mu m, IV: 13 center dot 77 +/- 1 center dot 51 mu m) (P < 0 center dot 05). In the single-screw-tightened test, with readings on the opposite side to the tightened side, Ni-Cr cast as one-piece (I: 58 center dot 66 +/- 14 center dot 30 mu m) was significantly different from cp Ti group after diagonal section (IV: 27 center dot 51 +/- 8 center dot 28 mu m) (P < 0 center dot 05). On the tightened side, no significant differences were found between groups (P > 0 center dot 05). Results showed that diagonally sectioning ill-fitting cp Ti frameworks lowers misfit levels of prosthetic implant-supported frameworks and also improves passivity levels of the same frameworks when compared to one-piece cast structures.

Design of Gaussian basis sets to the theoretical interpretation of IR-spectrum of hexaaquachromium (III) ion, tetraoxochromium (IV) ion, and tetraoxochromium (VI) ion

The Generator Coordinate Hartree-Fock (GCHF) method is employed to design 16s, 16s10p, 24s17p13d, 25s17p13d, and 26s17p Gaussian basis sets for the H ((2)S), O ((3)P), O(2-) ((1)S), Cr(3+) ((4)F), Cr(4+) ((3)F), and Cr(6+) ((1)S) atomic species. These basis sets are then contracted to (4s) for H ((2)S), (6s4p) for O ((3)P), and O(2-) ((1)S), (986p3d) for Cr(3+) ((4)F), (10s8p3d) for Cr(4+) ((3)F), and (13s7p) for Cr(6+) (1S) by a standard procedure. For evaluation of the quality of those basis sets in molecular calculations, we have accomplished studies of total and orbital (HOMO and HOMO-1) energies at the HF-Roothaan level for the molecular species of our interest. The results obtained with the contracted basis sets are compared to the values obtained with our extended basis sets and to the standard 6-311G basis set from literature. Finally, the contracted basis sets are enriched with polarization function and then utilized in the theoretical interpretation of IR-spectrum of hexaaquachromium (III) ion, [Cr(H(2)O)(6)](3+), tetraoxochromium (IV) ion, [CrO(4)](4-), and tetraoxochromium (VI) ion, [CrO(4)](2-). The respective theoretical harmonic frequencies and IR-intensities were computed at the density functional theory (DFT) level. In the DFT calculations we employed the Becke's 1988 functional using the LYP correlation functional. The comparison between the results obtained and the corresponding experimental values indicates a very good description of the IR-spectra of the molecular ions studied, and that the GCHF method is still a legitimate alternative for selection of Gaussian basis sets. (C) 2003 Elsevier B.V. All rights reserved.

Tratamento de doença periodontal induzida em ratos através da aplicação de laser de Er, Cr:YSGG: análise histológica

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Effect of Er,Cr:YSGG laser application in the treatment of experimental periodontitis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Corrosion resistance of Ni-Cr alloys in different mouthwashes

Several alloys have been used for prosthodontics restorations in the last years. These alloys have a number of metals that include gold, palladium, silver, nickel, cobalt, chromium and titanium and they are used in oral cavity undergo several corrosion. Corrosion can lead to poor esthetics, compromise of physical properties, or increased biological irritation. The objective of this study was evaluated corrosion resistance of two alloys Ni-Cr and Ni-Cr-Ti in three types of mouthwashes with different active ingredients: 0.5g/l cetylpyridinium chloride + 0.05% sodium fluoride, 0.05% sodium fluoride + 0.03% triclosan (with fluor) and 0.12% chlorohexidine digluconate. The potentiodynamic curves were performed by means of an EG&G PAR 283 potentiostat/galvanostat. The counter electrode was a platinum wire and reference electrode was an Ag/AgCl, KCl saturated. Before each experiment, working electrodes were mechanically polished with 600 and 1200 grade papers, rinsed with distilled water and dried in air. All experiments were carried out at 37.0oC in conventional three-compartment double wall glass cell containing mouthwashes. The microstructures of two alloys were observed in optical microscopy. Analysis of curves showed that Ni-Cr alloy was less reactive in the presence of 0.12% chlorohexidine digluconate while Ni-Cr-Ti alloy was more sensitive for others two types of mouthwashes (0.5g/l cetylpyridinium chloride + 0.05% sodium fluoride  and 0.05% sodium fluoride + 0.03% triclosan). This occurred probably due presence of titanium in this alloy. Microstructural analysis reveals the presence of dendritic and eutectic microstructures for NiCr and Ni-Cr-Ti, respectively.